WMP110v2 network connection, but do not open web pages

I have a Dell 2 GB of Ram and XP PC with the latest service packs and updates. No apparent reason, I had a little difficulty with the installation but after only two tests, but I the WMP110 to properly install and connect to my wireless connection. I use a D - Link Wireless Router N DIR-615 and my other wireless devices are running smooth.

My problem is that my wireless connection will not go to the internet and I tried to use the Linksys monitor, but also Windows network utilities to check the problem and run the wireless but not connect me. The Web page tries to load, but then ends with the screen 'diagnose connection '.

I think it will be easy but don't have yet to see a post explaining this problem and I don't know what to try next. Any help would be appreciated.

Thank you for your interest in Klatch - I got it working well. As the biggest computer frustration usually boils down to a few clicks. For those who have the same problem, here is what has held back me.

Until I'm able to get a connection I had to find some time to figure out how. Until I went in: WIFI - right click on the wireless connection, and then select PROPERTIES - click on the tab that says WIRELESS NETWORK -, PROPERTY - and then, AUTHENTICATION - once you see a checkbox indicating "authentication enable 802. 1 x for this computer"- UNCHECK this box. You will be able to connect to the wireless network.

Then, my next problem and the reason for this post was that my network is connected, but I could not display web pages. This solution is buried in the manual on the CD itself. To resolve this issue, you must go into the DEVICE MANAGER to view the Linksys WMP110 under network adapters. Click on in the driver, then go to the ADVANCED tab. Here, you will see a list. You will need to click on the NETWORK TYPE. You should see two types of networks that you can select. The default value for mine was INFRASTRUCTURE. I had deselect this and select AD-HOC instead. My web pages now appear quickly, and I can browse the internet with wireless only!

My setup is a N D - Link DIR-615 wireless router. I run Windows XP Home Edition on a Dell system. My type of security is WEP.

Hope this info may help others.

Tags: Linksys Adapters

Similar Questions

  • Cannot access Internet. It says I'm connected but will not display web pages.

    Original title: web no

    Unable to connect to the web says I'm connected but does not display pages

    Hello

    I suggest that refer you to the articles below that explain some troubleshooting steps basic to perform when you receive Internet connection problems.

    Why can't I connect to the internet?

    http://Windows.Microsoft.com/en-GB/Windows/cant-connect-Internet

    Why can't connect me to a network?

    http://Windows.Microsoft.com/en-GB/Windows/cant-connect-to-network

    If the advice above do not work, try to run a startup mode in minimum mode which must start Windows with only a minimal set of services and programs.

    How to do a clean boot mode

    http://support.Microsoft.com/kb/929135

    Note: After you perform a clean boot, be sure to check the "How to reset the computer to start normally after a boot minimum troubleshooting" section on the article above to start Windows normally.

    Thank you

    Legaede

  • Firefox reset done worse; is slow, it crashes, will not open web pages, what should I do?

    I had Windows 8/1 on my desktop Dell XPS 8500 with 24 GB of memory; a fast machine. I have a strong internet connection through my phone company Qwest; still works perfectly. Firefox worked fine. Then, last week or so I downloaded the upgrade of Windows 10 and since then, I continue to have problems. Firefox has slowed to a crawl, when it works. It often breaks down, web pages, I'll often does not open.
    I tried to re - set my modem; no improvement.
    I "asked" Mozilla how to fix and the answer I got online didn't make any sense. My Firefox - which is the last - had none of the places the answer told me to go.
    Line 4 icon does not open as the answer say in 'options '.
    Obviously, I'm not an expert, but I'm not a fool. I can follow the signs except the indications that I received was irrelevant to everything I could find on my Firefox to my display screen.
    When I re - configure Firefox I lost too much of what I had saved. I won't do that again.
    Is there a problem with Windows 10 and Firefox? Like I said, on 8.1 everything was exceptional.
    Is there a conflict with software I use?
    Where should I look to find answers?
    Also, I could NOT access the Firefox health report. Directions to find it, I received are not
    correspond to anything on my Firefox or my Options page.
    I don't know what to do. Please, I hope you can help me.

    If you have submitted incident reports then please post the ID of one or crash over recent reports that begin with "bp -":

    • BP-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

    You can find the ID of the status of recent reports of error on the page "help > troubleshooting information" (topic: support).

    • Click on the "All incident reports" button on this page to open the Subject: hangs page and see all incident reports.

    You can also open about: crashes via the address bar.

    See also:

  • Links will not open Web pages in Firefox (they will be in other browsers).

    I have re downloaded Firefox and reinstalled. But in vain. Won't open links in web pages. Can do in Safari. Download Chrome. But if I can't solve this problem, I'll have to give up Firefox.

    You can try Mode without failure of Firefox to see if the problem goes away? You can restart Firefox Safe mode either by:

    • By clicking on the menu button

      click Help

      and selecting restart with disabled modules, or;

    • Now the button option key when starting Firefox.

    If the problem is not present in Mode without failure of Firefox your problem is probably caused by an extension, theme or hardware acceleration.

    Let us know how you go.

  • Safari and Google Chrome does not open Web pages

    I have a macbook Air, about 1 year ago. On safari and chrome are the only sites that will open: apple (like this forum) Web sites, netflix, youtube and gmail. I can look for other sites, but when I click on the link, the following message appears like this-(for example on weather.com):

    Www.weather.com page does not work

    www.Weather.com has not sent any data.

    ERR_EMPTY_RESPONSE

    So, the Web site of cnn, another example, looks like this:

    Does not the www.cnn.com page

    www.CNN.com has not sent any data.

    ERR_EMPTY_RESPONSE

    Of course, I don't know what happened, any help greatly appreciated.

    You can follow the article: If Safari does not load a page or Web page elements are missing - Apple Support

  • Re: Satellite A200-1DN: do not open Web pages

    For some reason any my A200-1DN notebook Vista ceased to open certain web pages. These tend to be those who like Paypal, ebay etc. When I opened the Caravan Club homepage for example, it opens fine but when I try to log in it just on this page for ages and never opens. I have deleted the history of IE etc. and spin without Add ons. My m/c XP works fine. Any ideas? PS is there a problem with the Toshiba drivers pages. I can't just links to the drivers to open on any pc?

    Thanks Daveymo

    For the moment, I do installation of Vista ultimate on my Satellite A200-CR and download all the drivers. Everything works fine and I have no problems with Toshiba support page.
    Download works as usual - slow but without problems.

  • Connected, but can not visit Web sites

    Hello everyone

    I have a problem that started last night and I don't know what to do, and I'd be happy if someone here could help me on what to do, because I'm not very good at that sort of thing

    So basically, the problem is that I have internet and im using it via Wi - Fi to my router, but for some reason any I can visit only Google, Facebook, Youtube, and other sites, I can't even open. I tried on my iPhone and it is the same problem after my whole family is having the same problem with their laptops and the fact... I tried a few guides I found but nothing seems to work. The problem with my router or I have a virus. If some can give me some advice, how can I fix it, I'll be very grateful.

    Thank you

    Try restarting your router.

  • I can connect but can not open emails?

    I thought it was my desktop computer, given that I was able to open e-mail from other computers, but now I can't even open my emails from other computers. Again, I can connect to hotmail, but it won't allow me to open the emails?

    Hello

    When you go to your email address,
    you are ALSO automatically entered in another microsoft service?

  • WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

    I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

    Firewalls are disabled on remote computers?

  • Cisco vpn client to connect but can not access to the internal network

    Hi all

    I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

    Any help would be much appreciated.

    Hi Samir,

    I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

    (The link above includes split tunneling, but this is just an option.

    Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

    Let me know if this can help,

    See you soon,.

    Christian V

  • Cannot open Web pages well that connected to internet

    I just bought a laptop from Samsung with Windows 7 and I can connect to internet but cannot open Web pages (occasionally) - of ideas?

    You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

    I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

    I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  • I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. 'Microsoft Exchange Server' reported an error (0 x 80040115)

    prospects for bt infinity

    I recently changed my home to infinity of BT broadband.  Now I can't access my email works through outlook over a VPN.  The signin VPN works ok, I can see my network co., but can not use outlook.   I get the following error at startup of outlook.

    Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable.  Outlook must be online or connected to complete this action. »

    Anyone have any ideas?

    Allan M

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

    Ramata Thakur

  • My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

    My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

    original title: status: network address acquisition
    Hi BKlap,
     
    Try these methods in the order.
     
    Method 1: Repair the network connection to solve the problem.
    For more information, see:
     
    Note: The information in the article applies to Windows XP Home Edition as well.
     
    Method 2: Follow the steps listed in this article to resolve the problem:
  • Why my HPLaserJet P1102w not print Web pages, but it will print the pages of the notebook, etc. ?

    My HPLaserJet P1102w (with Windows 7, Firefox) does not print Web pages.  I can see the pages I want to print in the queue of the printer, but they never proceed with printing.  I see a blue light sometimes flashes on the computer.  Looks like he's trying to find a wireless connection, even if it is attached to my computer through a USB port under the guidance of the option given in the directive.

    When I copy and paste text into My Notebook application, it prints on my printer - but when I click on "print" on a Web page, it will not display the page.

    I think I can remove the question.  I discovered that Firefox is trying to use a printer I own is no longer.  I think I can understand it from here.  Obviously, choose my new HP printer for printing from Firefox.

  • Creative cloud runs in the background, but does not open

    I have many many problems with this terrible software.  No two days the same thing.  Today, that it does not open. It shows as running in the Task Manager. but does not open. I have deleted using the Task Manager and tried again, but it still fails to open. I am close to deletion and return to the stand-alone version. This is ridiculous. Anyone can help?

    Hi Andy,.

    We apologize for the inconvenience caused to you. Please end task associated Adobe all the processes that are creative Cloud, CoreSync, CCLibrary, CCXProcess, Adobe CEF Helper, Office of Adobe, Adobe IPC broker, Adobe Crash demon from the Task Manager. Then, start Creative Cloud Desktop Application and then connect you.

    It could be useful!

    Kind regards

    Shelly

Maybe you are looking for