Words of BIOS

There is no error code after I press the delete key.  The computer just hangs.

I may have made adjustments to the software at any given time, but is not yet back from the point that I can't on BIOS the computer crashes on the first screen.
Ideas on this would be welcome

If you're not beyond this point, you have a hardware problem. You need to take the computer to a repairman who knows what she's doing.

Tags: Windows

Similar Questions

  • Laptop HP 15-r062tu: words of Bios

    HII... Sir/Mam

    Before a month m using Windows 7, 64 bit, now I want to install xp window 2, I hv CD window that after a while my laptop screen showing this blue screen problem, I hv already checked bios setting n I hv tried so in many ways, but I find no sollution then please, help me, m try before 2 days but m nt still find sollution... Answer please I vil wait your ANSWER...

    Was a problem and windows has shut down to prevent damage to the computer.

    If it's time to frist that you have seen this stop error screen, restart your computer. If this screen appears again follow these steps:

    The BIOs in this system is not fully ACPI compliant please contact your system if you can't get a com updated a BIOS updated your seller not the ACPI compliant, BI the latest version of BIOS provided by mode implemented. You can turn off the text mode was to do this, press the key when you are prompted to your storage drivers not notify you button disable ACPI and you can continue installation. Technical information:

    www STOP;     oxooooooA5 (oxoooooo11, oxooooooos, oxF6FDEooo, o xooo4 ooooo)

    Hey @ARVIND6,.

    Let me welcome in the HP support community where you can ask questions, find solutions, and get help with problems you encounter.

    Downgrade from Windows 7 to Windows XP can be difficult. There are no pilot available for any operating system older than Windows 7 for this laptop of HP 15-r062tu and which may be difficult when the driver updates are needed to solve the problems.

    I provided you with the drivers to show you what is available for you and your laptop apart from Windows XP as Windows XP is no longer supported and drivers are not available.

    Here is a document for your Microsoft on Windows XP.

    Thank you for being a part of the community of HP. Please let me know if that answers your question on decommissioning by marking this message as "accept as a Solution.

    If you need more assistance let me know and I will gladly do whatever I can to help.

    If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I hope this helps!

    Have a great day!

  • Password locked Portege Z30-A-10Z - necessary BIOS.

    Someone at - it backup the bios of your laptop Portege Z30-A-10Z.

    My laptop bios locked me by password and need to program a new bios with new bios chip.

    I can't prove ownership with Toshiba with the original receipt so that they will not help as I bought it on ebay a wile back and the seller is is most homologous :(

    This is very stupid situation now. If your laptop is locked by word password BIOS you have big problem now and nobody here can help you. BIOS password needs to be eliminated by the authorized service provider.
    BIOS password is a function of security very important for any problem with machine locked should be handled by ASP. There are several different methods for BIOS password removal and it has nothing to do with the backup BIOS or some sort of new BIOS Setup.

  • Re: Chinese words after update Bios on Satellite L100 119

    I updated my Bios from notebook Satellite L100 - 119 PSLA3E with version 3.20 wordwide and after that my Bios words become Chinese.

    Someone at - he first bios?

    Plese help me.

    It's strange
    Did you use the BIOS from the European driver Toshiba page?

    This book belongs to the European series of Toshiba and if you want to update the BIOS then you must use the BIOS from Europe!

    Anyway, the last BISO on page 3, 20-win and it's only the BIOS which is available
    If you need an earlier version, then you will need to contact the Toshiba ASP in your country for a maybe version older, they could help

    But check the BIOS again access the settings and set its default value
    Then save the changes and the new boot
    Maybe it helps

  • Remove the satellite 5200-902-word of past BIOS

    Just turn on the computer laptop Satellite 5200-902 Harman Kardon hangs on the Toshiba screen and asks me the password I never set.
    I can't boot from any external device. In the little LCD Panel under the touchpad, I see the prompt for the password after three incorrect attempts, turned off the laptop.

    You kindly help me?

    BIOS password can be set only. If you don't set it maybe someone else did it for you make problems. BIOS password can be removed by Toshiba authorized personal only.
    You must also understand that BIOS password is very important security feature and how to remove it isn't for the public forum.

    I hope you agree with me.

  • Pavilion dm4 - 1063cl: Bios word password screen beep & not able to enter characters

    I boot to see the Bios password screen.
    The system seems continuous short beeps.
    I'm not able to enter the password or any character to go beyond the the Bios password screen.
    Sometimes a character, indicated by *, is entered in the password box but not matching does not to my favorites key.

    Hello

    Thanks for posting in the HP Support forum. Welcome!

    I'm sorry for the problems you have. I'm afraid that beeps usually indicate the sound of the motherboard and is not a good sign - usually some sort of hardware failure or problem.

    Please, read these two articles and try to find solutions for your problem/situation:

    > http://support.hp.com/gb-en/document/c03515402

    > http://support.hp.com/gb-en/document/c01732674

    If nothing helps, you must bring your computer (or ship it) to the service center of authorized HP Service Center where technicians can control on-site and fix. If your computer is still under warranty, or you do not know where such a Center, please contact HP support > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  • E 15 drive hard word frozen in the bios

    When I turn on my laptop and press F2 to enter the bios it says the password is clear, but the closure of the bios will not start, difficult of don't reviews not availible. When I reboot the acer logo appears and the screen goes black after several minutes, a blue page with two options to reboot or advanced options, I open the advanced options and access to the bios close UEFI and in security options it says that my HDD password is frozen. Other passwords are clear. I can't use recovery discs because the reader is frozen. Computer is Acer Aspire E15 with Windows 8.1 is installed and I can't START with a CD because it is not a cd player. Any help would be appreciated.

    try this get into BIOS, go to the last tab "save & exit" and choose "Load default settings", press F10 and click on save and exit.

    Enter the BIOS again and check on frozen password, if it is frozen, turn it off and press F10, save and exit. Check again.

    the best thing, he would do to clear the password, save and exit, remove the HDD, the BIOS boot, save and go out again, put the HARD drive and tries to start; but you must fully open your laptop back cover but...

    If you are under warranty, it is not a good thing to do.

    so, if you are under warranty and you can not disable the password, please contact Acer support.

  • the cursor backup when you post a question for misspelled words

    When your question in the search the slider box interrupts back or skip spaces, so the issue is full of misspelled words

    The problem is whenever I used Thunderbird. A friend suggested
    I could be in contact with the touchpad without realizing it. That's exactly what
    I did lately. So I disabled the touchpad and it works
    all right now. Had to go to BIOS to do as the function in the manual keys did not.

    Thank you. May soon return once again, but I hope not.

  • Napa-GL8E Motherboard BIOS update problems

    Hi, I have a Pavilion Elite m927a and Sunday, this update of the Napa-GL8E motherboard BIOS wanted to install. I did, and then all the computer froze. I was like, oops. so I forced it closed (power button which took place) and rebooted, and the same update arrived. I though maybe if I get rid of the process would lead, it does not freeze? so I forced it shut again, and the entire computer is dead. Would not boot the computer and emitted a beep code in groups of two, given that the BIOS was not happy (couldn't get the MESSAGE). So, I would have reset the BIOS myself, ' cept that I just bought a month ago, and I didn't kill my warranty, so I called HP and got a technician of po as a side note, it took over an hour for a person pick up, and I've been waiting very unfortunately. Anyway, the Grinch came to a fixed rate (I don't know what he did I wasn't there), but it doesn't have me talk about the update, and now, she wants to always be updated the update even that caused all the trouble.

    My question is this; What should I do about it? I'm too scared to run it again in fear of having to w8 for a technician again.

    Ty! ^^

    Do not install it.

    Word to the wise, do not install an update of the BIOS, unless you have a problem or you need something like a new game or software.

    This hp article should help you remove the element of updates (especially the last two sections):

    http://support.HP.com/us-en/document/c01124811

  • Satellite R830: How do the BIOS settings password protected?

    Hi all

    I installed a software protection against theft in my Satellite R830, but he suggested that I adjust the settings in the BIOS so that it will start only from the hard drive, and to make sure that no one else can modify it (if it is stolen), the BIOS settings are protected by Word.

    Can someone tell me how to access the BIOS at startup settings upward?

    Hello

    You can set the BIOS settings by setting the BIOS password.
    If someone would like to change the BIOS settings, the password of the BIOS would be necessary.

  • Tecra M11 - BIOS password recovery

    Hello
    I have Toshiba Tecra model:
    Toshiba Tecra M11 - 15W
    Framework/model n °: PTME0E-03J02SEP

    Problem is that I did not use this laptop for quite awhile and I forgot I put a Bios password. Now I need to re - install windows (corrupt), but I can't get my notebook to boot from USB or DVD. To access this menu, I need my Bios password.
    Is there a way I can flash or reset or something like that? I've tried everything, I even wanted to get inside my laptop to find the Bios battery and remove it, but I'm afraid I'm going to break something...
    I can remove the HARD drive and install windows on another PC and continue the installation on the laptop, but I still need this password reset...
    Thanks in advance!

    A few days ago someone asked the same question on this forum. Almanna probably know passeord BIOS is very important security feature and it can be retrieved or cancelled by an authorized personnel only. With other words as close to Toshiba service provider can do for you.

  • HP Envy 750-124: cannot get into the Bios of the normal on the envy of 750-124

    I speak not normal Bios and UEFI. I've recently updated to Win 10 anniversary

    Given my http://support.hp.com/my-en/drivers/selfservice/hp-envy-750-100-desktop-pc-series/8499646/model/8819... Bios Update

    who was A0.16 Rev.A.

    Installed and it reset my settings. I need to come back here to turn back on my virtual technology. Otherwise, I can create only 32-bit VM VirtualBox

    https://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/how-to-access-BIOS-to-enable-th...

    Cannot return to normal Bios. I tried Tap the ESC which worked before, screen freezes and I hit enter and the HP logo comes up, tried to hit and also hit F10. As much as I turn power. I have a wireless Logitech K800 keyboard that worked before. I tried a usb keyboard standard ensuring they were on a USB 2.0 port. F2 to display a cold start UEFI bios.

    Them win 10 things don't me settings there, recovery, advanced. Tried all

    I was hoping that HP had fixed the enter the Bios thing with updated Bios if installed. This thing was a pain like that otherwise I'd be a camper happy with this PC, how is it you can not solve this HP?

    Because of disconnect hard drive it hangs just below ground

    The solution is

    I had installed a better Nvidia GTX-950 video card. By hitting the ESC, it hangs and nothing happens. Black screen, although you can see slightly change the colors

    Fortunately both the edge video card and the new Nvidia both using a HDMI cable. So I just plug my integrated video card. Started while typing ESC and the Legacy Bios screen selection came where I choose F10 to enter the Bios of the legacy

    When you perform an update of the HP Bios seems to put everything back by default, in other words on board, by selecting the video edge. Although you can see by selecting HDMI port at startup if you think it's ok.

    I have worked with Dell PC for 15 years to work, it does not matter what card I put in them. At the start, I hit F2 and Bios loads so that bit me. Now I know

    Hope this helps someone else.

  • Satellite A80 - Microsoft Word / Powerpoint / Frontpage get suddenly closed

    Hello

    I've just updated Microsoft Office in my Toshiba Satellite A80, MS Office 97 to MS Office XP, and it is not working properly.

    The problem is that MS Word, Powerpoint, and Frontpage get suddenly closed as soon as I type anything. Excel and Access are working perfectly. I Don t understand that is the problem.

    Please find below some information on my laptop:

    -Model: Satellite A80-135 MS
    -OS: Windows XP Home Edition 5.1.2600 Service Pack 2
    -Bios: v1.50
    -CPU: Processor Intel Pentium M 1.6 Ghz
    -Memory: 504 MB of Ram

    Could someone help me with this?

    Thank you very much
    Oscar

    Post edited by: danhielo

    This isn't a laptop problem, but certainly something wrong with your Microsoft software.
    In addition the Toshiba laptops are not delivered with Microsoft Office software.

    I think you should contact Microsoft technical support for more details.

    A hint; I recommend reinstall the MS Office XP again. Do not update from Office 97 to Office XP, but perform a new installation.

    After the new installation, refer to the MS Update site and install all belonging to Office XP updates

  • Keys satellite C850 - Bluetooth and shortcut of Microsoft Word questions

    Hello.
    I had one laptop C850D-107 Satellite as a gift, but I discovered that there is no driver bluetooth inside.
    When I checked the drivers from this site for my brand, I saw two options; battery filter Bluetooth and bluetooth.

    Who am I supposed to download.
    Secondly, I am used to use the F keys in Microsoft word and using shortcut General but my laptop has additional on the F - keys command as the F4 is for LCD and so on, thus, making it difficult to use the original commands. Is there a way I can turn it off?

    Looking forward to your prompt response.
    Thank you.

    > I had a portable C850D-107 Satellite as a gift, but I discovered that there is no driver bluetooth inside.

    No all laptops are equipped with a BT module or feature and the C850D-107 Satellite can't internal BT

    > Secondly, I'm used to use the F keys in Microsoft word and using shortcut General but my laptop has additional on the F - keys command as the F4 is for LCD and so on, thus, making it difficult to use the original commands. Is there a way I can turn it off?

    You can use the special function key mode which allows you to use the function keys without pressing the FN key. This can be changed _in BIOS_ (F2->-> Advanced tab-> System Configuration-> special function mode key in BIOS)

  • Satellite M40X-112: password of HDD in Bios

    Hello

    I have a laptop M40X-112. I activated the password for HARD drive in the BIOS. How safe is it? The HARD disk can be read in another PC? -What are the data encrypted on the HARD drive? Regardless of the method is used?

    This text has been translated by Google, I hope it's okay...

    Sincerely
    Holger

    Hello

    HARD drive password is stored in the drive itself.
    Thus, even the HARD drive unit is deleted from a computer and attached to the other, the HARD drive password is needed to access.

    _Here are some details: _

    + What is A HARD Word DRIVE? +
    http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm

    Summary of TOSHIBA HARD drive password
    http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm

    Note: you will not be able to access the HARD disk if you have forgotten the password! So be careful with it!

Maybe you are looking for

  • HP G62: keyboard

    Hello I have a laptop G62. Some keys on my keyboard in the right corner no longer works when I push on them. As the buttom (House, dollar sign, key F10,...). The other keys always work on my keyboard. I think it all started when there was water on my

  • iPod Nano 7th Gen will not be running

    I was listening to just music and disable bluetooth speaker that I was listening to music on. So when I go to see my iPod, I notice it lights. I've tried everything. Now all buttons at the same time, hold the "home" button and lock button and still n

  • How can I remove Google Update Service?

    I uninstalled Google Chrome and cards and now don't have any Google product on my Windows 7 pc. I see nothing in programs and features; but in Task Manager - Services, I noticed that Google updated twice. I stopped them. When I look in the modules IE

  • Text missing when exporting pdf to word doc

    I'm trying to export a pdf file to word in Acrobat DC, but despite all my efforts on 2/3 of the text disappears. The headers appear, but the text body is unrecognizable because of so many missing characters.  I tried to print the PDF to the PDF print

  • Can we change port HTTPS configuration manager 12345 please?

    Hi guys,.There is a review of security, and we need to change the HTTPS port number of configuration manager 12345 by default, can we and how please?Thank youKatherine