Password locked Portege Z30-A-10Z - necessary BIOS.

Similar Questions

• Portege Z30 - cannot access the bios Setup

  Hello

  I can't enter BIOS setup when starting. Pressing on F2 allows me to enter the master password and HDD/SDD (confirmed validation), but the screen freezes at the "Toshiba configuration utility' graphics without any progress.

  This problem began to appear quite suddenly, I enter the setup of BIOS several times before without any problem. The only change that's happened that I know is an event of disruption/recovery failed.

  My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that? Is it possible to force it to boot normal start time? I'm using Linux, so I can't use the Windows of Toshiba Utilities.

  > I'm using Linux, so I can't use the Windows of Toshiba Utilities.
  That s bad:(dans le Toshiba HW Setup vous trouveriez un paramètre pour modifier l'option vitesse de démarrage.)

  > My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that?
  Hmm in my opinion, if the start-up speed would be set to fast, you wouldn't be able to press F2 and enter the BIOS password.

  However, in other cases, if the startup mode is set to fast, you can enter the first INS key BIOS and press the F2 key

  Give it a try.

• BIOS of the computer 0xc004f063 Portege Z30-B-117 lack license required

  in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today, I discovered the information that is required to activate windows. The laptop has been pre-installed Win 7 Pro and media attached to Win 8 Pro. In notebook isn´t COA label. When you build the code and enter the Activator appears information - computer license lack required error 0xc004f063 bios. Microsoft, I was told that my product key is required to provide a computer manufacturer. Please help, I could turn on the system and work again. Thank you very much

  in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today, I discovered the information that is required to activate windows. The laptop has been pre-installed Win 7 Pro and media attached to Win 8 Pro. In notebook isn´t COA label. When you build the code and enter the Activator appears information - computer license lack required error 0xc004f063 bios. Microsoft, I was told that my product key is required to provide a computer manufacturer. Please help, I could turn on the system and work again. Thank you very much

• New Bios for Portege Z30 - has Changelog

  Hello
  If someone has tested the new bios (4.20 - WIN (ECB1.40)) for the Toshiba Portege Z30 - A or is it an official change log?
  Toshiba did not alter the fan behavior? The fan isn't fort/boring, but he could kick a little later.

  Concerning

  Someone has already installed the new bios?

• How downgrade the BIOS on Portege Z30 - B?

  Hi all

  I updated the BIOS on my laptop Z30-B-119, and it is much worse than the original BIOS, so I want to downgrade it.
  There is no way to save the original BIOS during the update and the previous BIOS is not available on the site.

  Someone has the original BIOS and knows how to extract?

  Maybe someone knows how to contact Toshiba technical team directly? (Don't see what they have implemented in new BIOS, I have no hope they read on this forum or user opinions).

  If you're wondering why I want to downgrade and what's wrong with him, see below for an explanation.

  I was convinced that the new BIOS might resolve the problem with the fan, which works well too early, but it turned out they made much worse! The fan will now light at 42 °. Seized 50 °, which was already a Toshiba engineers stupid choice, provided that the side of the CPU temperature is 105 °, so that they could keep the laptop quiet at least until 60 °, especially as many people's complaint of the fan in this model. Instead, Toshiba has done the opposite and lowered the temperature even more.

  How foolish choice their engineers do, I will never buy another Toshiba and will not recommend anyone buy their products. But since I have already made the mistake one bought a Toshiba laptop, I hope that I will be able to downgrade the BIOS or contact them to request an update.

  Let me know if you know how to do it.

  Toshiba Portege Z30-B-119 PT253E - 01100XPL
  This European model belongs to the PT253E series

  The Portege Z3x - B PT253U (same model) was released in the United States and it supports the same BIOS

  The BIOS for the PT253U is compatible withE -PT253 and can be downloaded here:
  http://support.Toshiba.com/support/v...tentId=4007631

• Re: Portege Z30 - A - Bios update 3, 80-WIN using Win 7 64 bit

  Hello

  I have a Toshiba Portege Z30 - A
  Maybe someone was able to perform the bios upgrade in windows 7 64 bit?

  @tomek_1

  May I ask if you get an error message trying to update the BIOS?
  The downloaded BIOS package contains the exe to 3, 80 - WIN_ECB1.40.
  It is also a zipped folder. You can unzip the file using WinRAR or WinZip software.

  After that, you will get 16 files. I found the AutoExec file that seems to be the file that starts the BIOS update procedure.

• Portege P3440 asking for a BIOS password

  I have a Portege P3440 which I have not used for about 8 months. When I turn it on now it comes up with a screen asking for a password, and unfortunately I don't remember the password.

  Looks like a net bios password but I'm not sure. There Win NT installed. Please help as it becomes quite urgent.

  Sorry Brigitte, but if the BIOS password is not known to me it should be deleted. This is possible by only authorized service. :(

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Portege Z30 Module problem - A - 13 L 3 G

  I had a problem with a new Portege Z30 - A - 13 L.

  Module 3 G / 4G do not work. As a first step, the Air software map Watcher on the first Installation of Windows 7 detects the sim card and showed a signal, but it Air card Watcher Software still not said no reception (in German: Kein receipt).

  I also put the right apn in the profile.
  I had this problem with 2 different operators sim cards.

  Cause I wanted to use Windows 8.1 anyway I installed it with the original recovery disks.
  The original Windows 8.1 don t comes with Air card Watcher, so you must do with the instruments of the Board of Directors of Windows 8. Windows 8.1, I had a same problem. It detects the SIM, but it says no network (in German: Kein Netz). I put t found the possibility of changing the apn in 8.1 of Windows until you have a mobile connection.

  Initially the Device Manager displays the Module of Sierra Wireless EM 7305 as a network card.
  Then, I uninstalled the driver of Sierra Wireless and installed the Toshiba page.

  After that the Sierra Wireless Module presents itself as a Com device in Device Manager. The cause so much of this networker of Sierra Wireless adapter isn t it, the mobile broadband connection don t even shows charms Windows 8.1 bar upward.

  After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  Then I uninstalled and installed the driver manually again.
  He appears again as com device in Device Manager.

  So I think that the module has been a hardware failure. What do you think?

  > After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  > I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  On the page of the Toshiba UE driver, you can find and download the [Sierra Wireless Driver LTE 4 G driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17549 & STAS hortMod = null & language = 13 & selOS = 46 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 90092 & OS ID = 46 & driverLanguage = 42]
  This Wireless Broadband Mobile driver is used to transfer data at higher rates and greater capacity.
  Install it!

  Also 3G must be activated before you try to establish a 3 G connection.
  Please check if the 3G module has been activated correctly!

  Recommend checking this information page of Microsoft Mobile Broadband end-to-end
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  You will find different troubleshooting tips.

  In the case where you have a signal but you can't connect the possible reasons could be:
  You don t have a valid data subscription.
  The name of the access point (APN), user name or password used for the connection is not valid.
  You're roaming and the selected network operator doesn't allow data services or you don t have roaming enabled for data services.

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• Portege Z30 poster ipv4 and ipv6 - only pxe boot is

  Hi all

  Toshiba Portege Z30

  We do all our installs via PXE, when you press F12 I get now two network options where normally I would just get a.

  F12 gives the following options:

  HDD/SSD: SAMSUNG SSD SERIES
  LAN1: IPv6
  LAN2: IPv4

  When I select the option I get what follows read (IP addresses were not included, but are correctly pointing to the right servers):

  ------------------------------------------------------------------------
  > On IPv4 PXE boot.
  IP address of the station is *. ***. ***. ***
  IP address of the server is *. ***. ***. ***
  NBP filename is SMSBoot\x86\wdsnbp.com
  The NBP file size is 30832 bytes
  Download the NBP...

  Succeed to download the NBP file.

  Download the NBP...

  Succeed to download the NBP file.
  Press a key to continue...
  ------------------------------------------------------------------------

  I tried searching through the BIOS settings but can't find nothing obvious

  Can any advise if there is anything I can try to get this laptop to perform a PXE boot please

  Let me know if you need additional information

  Kind regards
  Steve

  Looks like your server isn't aware UEFI.
  Try changing the the CSM UEFI Boot Mode in the BIOS under the Advanced tab, under System Configuration. You may have to disable Secure Boot first.

• Portege Z30 - A - PXE Media test failure, check cable of

  Hello everyone,
  Here's my problem: two days ago my Toshiba Portege Z30 - A turns off suddenly, and when it has reactivated the instead of displaying the usual Windows Home page at he showed a black screen with these lines written:

  'Intel(r) Boot Agent GE v1.5.43
  Copyright (C) Intel Corporation 1997-2013

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready... »

  And every time I turn it on it displays this screen again.
  Why is it like that? What should I do?

  Thank you very much
  Stefano

  It seems that the system does not recognize your ssd more. Usually, the hard/SSD is the first bootdevice and whether it is empty or does not exist, it will jump to usb or networkboot. PXE = networkboot

  Try to start with a live-stick and the check if you can access your SSD. Also see, if the bios/efi does not recognize the drive.

  Worse: all your data is lost... (I hope you have a backup)
  the positive: this question must be covered by the guarantee! If you are still in the first year and registered for the guarantee of reliability, you get your laptop repaired and all your money. xD

• Fingerprints on the Portege Z30-A-12 q utility does not work

  Hello

  I need help with this issue:

  I have installed fresh windows 8.1, the same version as before, but this time I chose UEFI on BIOS. When I used the BIOS the fingerprint sensor was working fine, but now it says "unable to connect to the probe.

  I use Toshiba Portege Z30-A-12 q i5-4200 256 GB SSD, or PT243E model. I've searched the forums and found a similar problem with another Toshiba R product that was resolved by adding an exception to the firewall.

  Utility of fingerprinting with the exception of firewall, even disabled firewall all the way, but always the same problem, I added. In Device Manager, I have biometric sensors (WBF) (PID = 0010) validity under devices.

  I also checked in the BIOS to see if it it turned on and it is.
  The only thing I changed in the BIOS are Secureboot (is on) and has chosen CSM (UEFI), but I think that these settings are not relevant to the problem because they are used for starting.

  I tried to uninstall and reinstall the driver 3 times.

  Please help me with this problem.
  Thank you very much
  Andrei Colombi

  UEFI / start MSC mode has no influence on the fingerprint sensor.

  You said you did a clean install of 8.1 to win.
  I guess that the problem is related to the driver missing or utility.
  I guess you do not have all the essential software available on the Toshiba UE driver page.

  System driver Toshiba to win 8.1 must be installed. It is very important driver package.

  But also try to register fingerprints first in the Windows settings.
  Go to the control panel? Audio equipment &? Biometric devices
  To the left, click Change biometric parameters
  Now, you will see two options: WE (marked) biometrics and biometric OFF (unmarked)
  Now, go to biometric OFF and save changes
  Now go back and click on settings again biometric change
  Now return to the biometrics IT and save the changes.

  Now, you have to click on use your fingerprints with Windows and register fingerprints.

  I think it might be useful to get the utility of fingerprinting works again.

• Portege Z30 - B - Toshiba picture after change for Linux installation

  Hello.

  I just bought Portege Z30 - b.

  I want to replace windows with linux (fedora I think), I did the windows image by using Recovery Media creator on USB.

  So if now I will install linux I delete all the files on the SSD.
  Maybe futture I want to reuse windows, can I return to original state by using this USB?

  If I install this linux, what happens with toshiba tools accessed through the BIOS/UEFI?

  Where can I get windows CDkey?

  Thanks for the help!

  BTW: great laptop!

  can I go back to original state using this USB?

  Yes, recovery would fix the laptop back to factory settings.

  If I install this Linux, what happens with Toshiba tools accessed through the BIOS/UEFI?

  I'm afraid that I'm not sure what you mean exactly with Toshiba tools accessed through the BIOS...

  Toshiba tools do not support Linux... you can install Linux but Toshiba software wouldn't. But you can still access the F2 BIOS support and turn the device

• Portege Z30 - Has is not awaken from its slumber

  One of our employees is using a Toshiba Portege Z30 - A connected to a DisplayLink Targus docking station. By default, our SOE configures power settings to do nothing when the lid closes. We have configured the laptop of this person to go to sleep when the lid closes if the notebook is on battery, and keep the default setting to do nothing if the lid closes when the supply network. About 6 weeks, the laptop has stopped waking up from his sleep.

  I don't know if the implementation of standby or try to wake up from its sleep occurred when it is connected to the sector or on battery only. What are some troubleshooting steps that we can take to help diagnose the problem? BTW, the key entry nothing on this forum site, using IE10/Windows7.

  The laptop does not wake up from sleep, open the lid or also by pressing the power button?

  What BIOS status?
  Is it already knows?