work is ' t Bluetooth

Similar Questions

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• SHIFT key does not work on the bluetooth keyboard connected to the Air ipad on ios 10

  the ipad reboots when we use the uppercase key on the air of the iPad. And in some cases, it shows the changing language selection when the SHIFT key is pressed. The keyboard is perfectly fine and works with ipads o

  I also have the same problem.

  I use 2 keyboards, Bluetooth,

  A wireless Apple keyboard - I mean Magic Keyboard

  The other is universal foldable keyboard from Microsoft

  After updating iOS 10.0.1, Caps Lock does not work, but change language or restart the iPad or it's like restarting the application (kick out of the home screen),

  I thought it happened to MS only the product, but when I connected my Apple Magic Keyboard, the same thing happens!

  Difficulty please, Apple!

• Satellite L300: FN F8 does not work to activate Bluetooth

  Thanks for your reply and sorry if I speak very well English.
  I bought 3 Toshiba L300 PSLBGE and after installing Vista, I tried to install the battery blueetoth.
  After a few minutes, the installation program ask for me to plug in the unit (it is built) and to do this I press Fn + F8 but it doesn't work.
  I'm sure that there is a built-in bluetooth device because it has the logo on the box (and also on the bottom of notebook).
  What can I do? Thank you.

  Hello

  Make another function of FN keys?
  Have you installed all necessary drivers that would allow the FN button functionality?
  Installation of battery BT over properly?

  Why you do not use the Toshiba preinsatlled OS?

• My Acer Iconia W/700 external keyboard does not work. My bluetooth seems ok.

  My external keyboard does not work. I can't type on the screen and my bluetooth seems ok.

  Here is the link with the steps to connect your Bluetooth keyboard

  http://Acer.custhelp.com/app/answers/detail/A_ID/27798/kW/W700

• NC helmet will work on this bluetooth headset?

  SBH54 Bluetooth® stereo headset

  Noice cancelling and the functions of these headphones:

  High resolution headphone Audio MDR-NC750

  work with the headset?

  I'm afraid that you won't get with MDR-NC750 noise if you connect them to SBH54. They need to be connected to the phone or other device with a 5 pin socket and that supports noise.

  To get similar noise with bluetooth, you need a bluetooth headset that has this feature. I have not tested it myself because they are not a Sony Mobile product but this headset has noise: http://www.sony.com/electronics/headband-headphones/mdr-zx770bn

• Windows 7 no longer work with my Bluetooth Mices

  I have the mouse following BT who used to work with my Lenovo X 200/Win 7 Pro.

  -Microsoft Bluetooth Notebook Mouse 5000

  -Logitech V470

  -Kensington PilotMouse Mini Bluetooth

  Recently, after that I restored the operating system to a previous state, my BT mouse not working. I tried without success to the following:

  (1 removed i) Microsoft Bluetooth Enumerator, ii
  ) ThinkPad Bluetooth 2.1 with data rate raised and ran Scan for the hardware changes

  2 remove all devices under Device Interface and reboot.

  Under control panel > hardware and sound > devices and printers, I found my Logitech V470 mice and other mouse compatible HID. However, there is no option of devices to remove in the right click menu.

  I'm sure it's a matter of Win 7. Anyone know what I reinstall to do my BT mouse working again? Thank you.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Updated to work with Jaybird Bluetooth Wireless headset Bluetooth driver

  I tried to have my Jaybird Bluetooth Wireless headset work with my desktop HP (model. s5688d number).

  The Office does not come with built-in bluetooth and bought an external generic bluetooth 2.0 dongle. My computer can find my Jaybird headset but keeps his return the following errors:

  https://Jaybird.Zendesk.com/attachments/token/cQ5wdKXTsWHJl0OqsOmK2FC97/?name=image.PNG

  https://Jaybird.Zendesk.com/attachments/token/ov98qXEEHjLlIYbVGvDChPpKs/?name=image.PNG

  https://Jaybird.Zendesk.com/attachments/token/nOXlNL0g7kLYQBpwibfbRiXdk/?name=image.PNG

  Where can I find the correct driver, or if not, how I have to troubleshoot?

  Thank you very much.

  Hello neon

  Thanks for the reply - I didn't hear back for a while and wasn't already waiting to!

  Bluetooth dongle did not come with a driver (it was one of these "plug and parts"), but after several trials and errors, I managed to make it work with this driver download: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=cp-102236-1

  See you soon!

• Get a PhotoSmart C5580 to work with a Bluetooth connection in Windows 8

  I have a PhotoSmart C5580 for several years.  It was working fine with my old laptop running Windows 7 with USB and Bluetooth.  My new laptop has 8 64-bit Windows and the USB connection works fine, but I can't get the Bluetooth connection to work for the life of me.  The old laptop needed a USB Bluetooth adapter, but the new laptop has Bluetooth built in.

  I'm pretty tech savvy and searched through various online and tried the HP Installation Wizard help documents, but they speak mainly on USB and wireless and not on Bluetooth technology.  The Panel has USB and BT printers installed.  BT is currently marked as default printer.  The BT menu on the printer is marked to be visible, and BT options on the computer seem far too, because the computer totally see the BT printer.  The list of Windows 8 devices (two BT and otherwise) lists currently both the USB printer, which according to her, is cause of disconnected the USB cable is disconnected in fact and not the BT printer, he's talking about.

  Whenever I have remove the BT printer and add it again, the HP software/driver installs again and says it's successful (even if the driver for the USB connection and the software are already installed and work very well).

  The only problem is that the HP Solution Center indicates that the BT printer is disconnected.  It really tells me nothing more than that.  It's the same message that my old laptop would give me if I didn't have the USB Bluetooth adapter plugged in, but here the BT is built, and the computer says it is on and working very well.  So I'm a little confused at this point.  Any help anyone can offer would be greatly appreciated.  Thank you!

  I am delighted to hear that, and I'll pass that along our engineers so that they do not worry. I didn't even really think, but if you leave the USB cord is plugged it will disable the BT adapter in the machine - which could cause prints of BT to fail but not USB prints.

  Have a wonderful day!

• Laptop HP 15-r022tx - Wifi Button doesn't work is not (Bluetooth too)

  Hello team,

  HP 15 - r022tx Notebook PC button wifi of this model does not work. so I can't connect to internet via wifi.

  Is there any particular wifi driver to install?

  My Version of the OS: Win 7 32 bit

  Note: The Wifi button continues to blink with orange led light. So am confused if the wifi is on or not. I installed most of the drivers of hp.

  Please update this question.

  See if this driver Intel graphics works rather... old version...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23714&lang=eng&ProdId=3719

  If the Intel driver works, you should then be able to install the nvidia driver.

  Try an earlier version of the driver ralink wireless card...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Bluetooth not working not not on HP envy m6 1178sa

  Hello

  Bluetooth does not work on my laptop HP envy m6 1178sa running WIndows 8. The option does not appear in the wireless settings screen.

  All the troubleshooting it says ' USB - if xHCI host USB controller has a driver problem "and tried to reinstall the system, but not solved the problem."

  Help, please.

  Concerning

  Reni

  Hi ReniV, welcome to the Forums of HP. If the USB - if xHCI USB host controller port has a driver problem which could not be repaired automatically, try first to restore the Chipset from Intel using this method: use of the Recovery Manager to restore the software and drivers (Windows 8)
  
  That corrects the error, test your Bluetooth again. If it doesn't work, restore your Bluetooth drivers using the same method.
  
  Let me know how that turns out.

• iOS 9.3 do bluetooth hands-free connection to my Audi stuttering. Using google maps with instructions of the Tower burn on bluetooth still works very well. It's an iPhone 6. Another 6s to 9.2 iOS iPhone works very well with the hands-free bluetooth.

  iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.

  Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.

  Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.

  It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.

  Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.

  I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.

  Anyone alse experinceing this?

  And tip on how to fix it?

  I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.

• Satellite C660-1TE - bluetooth driver missing/no works

  Hello

  Model: C660-1TE.
  OS: Windows 7 32 bit.

  All of this work. Only bluetooth and touch pad has lack drivers or does not not perfectly.

  Bluetooth: well I've worked to get bluetooth works for a long time and I have to do without success.

  I found some drivers but these seem to be wrong or does not work. The problem is that for this model there is no bluetooth driver or what operating system I use. I found these drivers looking for the model series to see if I can find some drivers of the company that makes this bluetooth but again unsuccessfully.

  So im required to get my bluetooth works and I need assistance to do so.

  Then press the key. It works fine but I have no scrolling or other functions that should be for this model (looking at the box where was the laptop inside.) Yet once, I was looking around to see drivers or the appropriate drivers for Tablet touchscreen but ended once again without success.

  This isn't a big deal, but at least I wand scroll, because its annoying if you have long site and you can't scroll down.

  Thanks if I get some answers!

  Hello

  > The problem is that for this model there is no Bluetooth driver or for this OS, I use

  Your laptop is equipped with an Atheros WLan / BT combo card.
  The software is available defitnialy
  You have to install is:
  (1) package of filter Atheros Bluetooth (available on the European driver Toshiba page)
  (2) Toshiba BT stack (available here http://aps2.toshiba-tro.de/bluetooth/)

  After installation, activate BT using Fn + F8

  > Then press the key. It works fine but I have no scrolling or other functions that should be for this model (looking at the box where was the laptop inside.) Yet once, I was looking around to see drivers or the appropriate drivers for Tablet touchscreen but ended once again without success.

  Drivers (also the touchpad) are on the page of the European driver Toshiba
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  You must choose the Satellite C660 PSC1NE.

  You can check the touchpad settings in Control Panel-> mouse-> tab advanced-> button Advanced settings

• IPad 2 bluetooth does not work with bluetooth speakers?

  iPad 2 bluetooth does not work with my bluetooth speaker? What should do?

  to connect a bluetooth headset or a speakerphone with a device, it has not been used with before the bluetooth headset/speaker should be placed in the pairing / discovery mode, how do we do everything therefore in the manual of the bluetooth headset / speaker

• Portege R500 - Nokia PC suite does not work with Bluetooth

  Hello

  Toshiba bluetooth + nokia pc suite works DO NOT!

  I have problem with Portege R500. Toshiba Bluetooth stack 6.40 (from the download page) is not compatible with the new Nokia PC suite 7.1.
  PC Suite only works with Toshiba Bluetooth stack, driver version 5.10.12. PC Suite indicates that bluetooth can not be found.

  * See the system requirements for PC suite

  http://Europe.Nokia.com/get-support-and-software/download-software/Nokia-Ovi-Suite/system-requirements

  Where can this 5.10.12 version be downloaded for 64-bit operating system? I just need for the trial which would even work.

  Help, please!

  Hello

  I'm not very well if you want to get an older version of battery BT m.
  On this Toshiba Bluetooth portal, you can get the new version 6.40.00 BT
  http://APS2.toshiba-tro.de/Bluetooth/

  But I don t understand why it should not work with c. 6.40
  I think that Nokia system requirements were created before the release of version 6.40...

  However, if newest PC suite 7.1 is not compatible with the BT 6.4 then I recommend that you test the battery Microsoft Bluetooth...