Satellite L300: FN F8 does not work to activate Bluetooth

Similar Questions

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Satellite L40 - 15G - WiFi does not work - cannot activate usign FN + F8

  Hello

  I have a toshiba satellite L40 - 15 G with windows 7 32 bit and my wireless is not working, the pilot is OK
  I do FN + F8 and I can't active wireless :(

  What should I do more?

  Hello

  The Fn + F8 isn't really essential to use the WiFi network. Generally, the WiFi network should be enabled by default.
  So even if the Fn + F8 does not work, the WiFi network must be enabled.
  You see the local network card in Device Manager? Is it correctly recognized?

  Where he is, follow these steps:
  Go to the control panel (switch to the large or small icon view)-> network & sharing Center-> left column manage wireless networks
  Add here new WLan and configure it by using the right SSID, encryption and password encryption.

• Satellite L300-1BD - output does not work VGA

  Hello.

  I have a Toshiba Satellite L300 1BD (model PSLB8E). I've been usinng the VGA output to connect to my LG tv. It worked fine until last week. All of a sudden the TV won't not reckognized by cell phone. TV says no external device is connected. I tried different things: commissioning with the TV connected and not connected via the VGA cable, by pressing the FN + F5, removing the battery and pressing on the powerbutton, verified to the last videodriver, deleted the driver existing and installed new... unfortunately without result. I also tried to plug the TV with a different VGA cable, but no result. It is not the TV because I tried to connect the laptop to a TFT monitor and it did not work as well. Tested the VGA cable with my friends laptop: it works perfectly.

  The strange thing is: if I crochet TV up the laptop, I can hear the phone makes the his "new hardware found" and turns black same laptopscreen for a second, then everything appears on the laptopscreen. If I check the graphic properties with the right click on my desktop, I see they are no set for 'clone device ". As if the laptop computer knows, something is connected, but just cannot transfer the image to the TV screen.

  The graphics card is a Mobile Intel 4 Series Express Chipset family.
  The OS is Vista Home Basic (32).

  It's a shame that the VGA output seems to be down because I watch tons of videos and movies through my laptop on the TV screen. I don't know if this could be a software or a hardware malfunction. If someone has an idea or an idea, please let me know. Thanks in advance!

  Marcin.

  Hello

  All that you have done to test the functionality of a VGA port is good, but I assume that there must be a hardware problem and I recommend you to contact the nearest Toshiba service provider.
  Of course, on this path virtual, we can only speculate what may be the problem, but it should be tested correctly. If you want to last and ultimate test Exchange HARD drive, install original OS, you got with the functionality of your laptop and test with the factory settings.

• Satellite L300-190 - Wireless does not work in Ubuntu 8.10

  Hello

  I recently bought this Toshiba Satellite L300-190 (PSLB8E-014008N5) of the machine.
  First of all, I tried to install Ubuntu 7.x, but which failed due to a problem of graphics card. So I try the new version of Ubuntu 8.10, everything works fine, except wireless. There is no detection wireless in there.

  I tried through the Ubuntu forum, but still no luck. Please help me if you can provide me with a good driver or can guide me as well.
  I await your response.
  Ali

  Great news. Thanks for the link.

• Hot satellite L300 - function key does not work

  After the superb help I got from Jimi, I hope I can solve my problem last, I changed my OS from Vista to Windows XP Home edition and I managed to get all the drivers working even if some on the site of Toshiba don t work like Wi - Fi, I managed to acquire other places. Alone, I can't get to work is the shortcut keys, it says TOSHIBA COMMON MODULE NOT FOUND! Everything else works OK after using Nlite (cracking bit of Kit)

  My laptop is Sat L300 - 1AQ model PSLB8E-OOKOO

  Thanks a lot for your help

  Then, visit the Toshiba download page and check for common Modules. There is version 1.00.05. Download and install it.

• Satellite L300-11V - Internet does not work after you remove software

  Hello

  Internet my brother no longer works. We believe that it is because he took off a bunch of software/programs to free up space.

  He said that the problem is
  ... "There are problems of hardware or driver with the network card"Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)"on this computer".

  Can someone please tell me how to solve this problem, or what to download?

  The laptop is a Toshiba Satellite L300D-11V

  Thank you

  Hey Buddy

  This error message is that you need to reinstall the driver for the network card. You can get this driver on Toshiba page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If you have installed the latest version of what the Internet should work again! :)

• Satellite L300 PSLBGE webcam does not work

  Just bought my first toshiba laptop. After you install the Chicony webcam driver I see more info - that the system requires to install CNF7051 device driver. And in my device manager, I see such a photo.

  [http://i014.radikal.ru/0910/54/00a1ca91bed7.jpg]

  Please help me how to solve this problem?

  Hello

  I don t know Russian and therefore, the screenshot is not really useful (because of the different letters)

  But you can use this provider PCI database to determine which device driver is necessary:
  http://www.PCIDatabase.com/

  Here you can search the Vendor ID and Device ID which you might find in device-> properties from the Device Manager

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• Satellite L300 - 1 9 does not start safe or normal mode

  Hello

  My computer does not load to the top of the security mode or normal mode.

  Although Macafee, my virus protection software provider believe their recent problems are to blame they have offered no solution and instead asked me to load windows with my "installation disk".

  I can't find it, where to do it? (p.s. my computer is the Satellite L300 - 9 1 series.

  Thanks in advance.

  Hello

  If you are not able to start Windows try first HARD drive recovery option:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  If this does not work, you need the recovery disc you can order here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

  Hello world

  Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

  I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

  I boot on my USB (made with RUFUS), but it works once for each five times.

  After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

  How to install Ubuntu?

  Hello

  This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

  The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

• Satellite A500 - 14Q - Microphone does not work

  I have the Toshiba satellite A500 - 14Q for about 3 years. I changed the hard drive, keyboard, frame of the monitor until now, and I'm sick and tired of this laptop does not properly. Now, I've discovered that my microphone does not work. There is no problem in device, or with the driver manager. I hear that crackling noise when I try to enter any other micro device.

  Can anyone help please?

  P. S. I have windows 7 (64-bit)

  How did you test the mic feature? With the help of tool tape recorder?
  > the monitor framework
  Perhaps you have made a mistake and mic is not connected correctly. Did you do it alone or it was done by the Toshiba authorized service provider?