Work with the Pages in the form of simple Pages temporarily

Similar Questions

• Hosting companies who work with the forms of the muse

  I'm looking for a good Web host to move my domain to. If you have success with your hosting as forms of the Muse are concerned, can you tell me what you use to host society?  I use NEWTEK, they are EXCELLENT but Muse forms will not work.  I tried FASTWEBHOST and forms worked, but their intermittent service was really terrible, as their support.  Thank you.

  Thank you jtkay!  It's good to know.  I check the video too.   BUT I did some research too, and I decided to go with Bluehost. Aprox same price that all the rest, USA located servers in Utah, and especially work forms the Muse!  YAY!  I can't believe how the forms are such a question... but they are valuable.   Thanks again for your response.  :-)

• working with the form offline

  Hello Forum, planning

  I would like to test the ' offline '.

  I did the following:

  adminstratoin - applicatoin properties-> set to True

  

  on the form as well

  

  and the function is always grey

  

  What else is missing?

  Thank you very much

  Messi

  Make sure you have the exe of planning for your version installed on your computer as offline. It can be downloaded from the workspace in the same section you have for other facilities.

  Once you have that let us know if you still have the issue.

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• G72 - B66: is this form that he could work with the HP G72 model

  Is this or is this screen may work with the HP G72 - B66 model

  Hello

  The screen above will not work on your device.

  G72 the product manual, check Page # 69

  http://h10032.www1.HP.com/CTG/manual/c02623152

  The G7-1000 product manual, check Page # 89

  http://h10032.www1.HP.com/CTG/manual/c02720306

• When we publish a Web site create in MUSE, the server must be linux? Please let me know because I have the problem with the form works... now the server that I use is the window...

  I am trying to publish in my domain on windows server, but I have a problem with the form...

  The server must be linux to work the form?

  Thanks in advance for your help...

  Thank you Brad... but how can I understand if a Linux server support? I try to do something in particular?

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• Anyone who works with the CAF (Caltech intermediate Format) files in LabVIEW?

  Hey everybody,

  Anyone who works with the CAF (Caltech intermediate Format) files? These are files that are generated by IC layout programs, such as TannerEDA L-Edit, that define the layers and arrangement of the masks used in VLSI (Photolithography) of processing semiconductor device.

  I would like to analyse these CIF files to generate a map of wafer of devices for use in the-plate test. Currently, a plan of shooting is made and then I manually switch and define coordinates of line and column for the edge of a plate and various places of drop-in. I would like to automate this process, and I don't know if it is possible by playback of these files from the CAF. However, I don't really know how to read them, and I can get as much information from the Wikipedia page and the original article.

  So I ask: anyone has an easier set of screws that make reading CIF file? Or someone working with them can help me with my problem? I can describe it in much better detail once someone comes...

  Here is one of my notebooks CIF of Mathematica (remove the .txt extension obviously).  I used it to create a new CIF file with four instances of the object in a file.

  You can load a file with the following text:

  symName = loadCIF;

  You can see the layers:

  CIFlayers [symName]

  You can view layers:

  Show [{viewCIFlayer [symName, #, color of layer]}]

  (if you wish, add multiple layers to the list)

  If you have a file of type CIF I can also test to see that it recognizes the objects you use, I am generally to polygons and boxes.

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• BlackBerry smartphones of the suggestions for a weather link that works with the storm

  Hi guys,.

  Suggestions for a weather link that works with the storm?

  I like this one:

  http://www.NOAA.gov/

  I put in my zip code, and then when he shot to the top of my local forecast I bookmarked this page in my Storm. It marks the latitude and longitude, so when I go there next time I have to weather day.

  Easy to read and not a bunch of gadgets ads cluttering it up.

• Is there a driver for Windows 7 available for this printer? One user in our office was able to make it work with the Vista driver.

  Is there a driver for Windows 7 available for this printer?  One user in our office was able to make it work with the Vista driver.

  According to the website of Epson here

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Epson%20fx-980&OS=32-bit

  the latest drivers are for Windows XP 32-Bit.

  This Epson Web page says drivers

  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=en-GB&kbid=324521

  are available via Windows Update.

  Microsoft Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=Epson%20FX-980%20Impact%20Printer&v=Epson&UID=C276001&l=en-us&pf=0&PI=0&s=Epson%20fx-980&OS=32-bit

  says it's not compatible.

  Clearly, there is an inconsistency in the tips above. I would try the road to Windows Update to see if his list - I would test it myself to see if its listed, but my connection to Windows Update seems to be suspended.

• Train with webutil works with the browser, but not with webstart JNLP 12 c

  Hello

  I set up forms and reports suite 12 c according to the instructions and I'm testing my forms updated since version 10 g.

  In some forms, I use webutil.

  I can run forms without webutil with the browser or java web start (everything works fine).

  I have problems with the forms use webutil tha, they work very well with the browser, but not with java web start.

  When I run forms with webutil and webstart I see all white and the "crash" application: I must leave because other forms without webutil also do not work.

  Here is my config in formsweb.cfg:

  [Appws] <-start java web

  form = nomeform

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  WebUtilTrustInternal = true

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  basejnlp = webutil.jnlp

  WebStart = on

  [appnows] <-no java web start

  shape = mercurio

  separateFrame = true

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  WebUtilTrustInternal = true

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  basejnlp = webutil.jnlp

  What could be the problem?

  Gianpaolo

  Remove Appws:

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  Add frmicons.jar and jacob.jar to $ORACLE_HOME/forms/java/extensions.jnlp.

  and try again.

  Concerning

• Challenges, working with the Blues in vco vcac plugin

  Hello

  Work with the latest plugin VCAC release VCO (5.2 and 5.5 respectively), I intending me to put a simple set of wrapper script element before the workflow 'Configure a virtual machine for an action plan', such that (to start) entries and group plan Director supply could be sent in the form of simple name strings, rather than expecting to complex objects (as expected) to allow for easier consumption REST API (not through the layer of presentation btw, who used the inventory tree to search for and provide said interactive input objects).  I couldn't find any provided action let me do the recoveries of simple object by name and decided to start by entering a complete picture of the objects and don't string correspondent against her...

  This proved be simple enough for the provision of groups and works very well - namely due to the provided method "host.findAllChildProvisioningGroups ()", you were using it directly or through the action "getAvailableProvisioningGroups".

  Blue are becoming another story.  I found the 'getBlueprints' action, which appears to be operated by the presentation layer when the workflow is run interactively, holding an object provisioningGroup in entry (which I had already recovered above).  It did not work when used in a script element, however.  After reviewing the support action, I found that it relied on a property of the object group configuration, rather than a method (it is not a useful method available).  Adding that debugging confirmed that the table was never fill when referenced (group.virtualMachineTemplates).  I don't know if it's broken or if I should wait only it works through presentation, or if I was just incorrect use - but I started looking for alternatives.

  I have looked around in the browser of the API and other samples, including the set of extensibility and reviewed all the activities planned, but they always seem to wait for the entry of VCAC:Blueprint type.  I found getBlueprintsForProperty and it is close to what I need, if it is running too slow when you pull a list of close-up (nearly one second per object).  I don't know linqpad can empty all the plans into VCAC (via ODATA) much faster.

  In the end, I'm looking for a way to get easily all plans for a commissioning Group (or even a host if it is fast enough), returned in an array of type VCAC:Blueprint can I browse - or even more simply, to retrieve the object model directly based on a property displayName known and gets my object.  I am aware of the VCAC entity the full mechanism added in the last plugin, but concerned that I'll be back will not match the input type... It seems that some properties do not match the type VCO and others do not part of an entity to plan at all.  Frankly I was hoping to not who become familiar with the innards of the existing API VCAC and wouldn't not rather recreate a plan object of its parts of the requested Party.

  If you're still with me, thank you! - and, ideas?  I'd like to hear missing me something simple here...

  -Milson

  OK spent more time on it with begins to implement a piece of javascript to directly get an object in the inventory of its entity vCAC. Instead of an iteration all objects of the same type, it is the object directly by ID.

  var entityKeyProperties = entity.entityKey;
  var entityIdKey = entityKeyProperties.keys[0];
  var entityIdValue = entityKeyProperties.get(entityIdKey);
  System.log("Found key " + entityIdKey + " : " + entityIdValue);
  
  switch(entity.entitySetName) {
  
      case "VirtualMachines" :
          inventoryObject = Server.findForType("vCAC:VirtualMachine", entity.hostId + "/" + entityIdValue);
          break;
  
      case "VirtualMachineTemplates" :
          inventoryObject = Server.findForType("vCAC:BluePrint", entity.hostId + "/" + entityIdValue);
          break;
  
      default : throw "No inventory object for entity type " + entity.entitySetName;
  }  
  

  I worked with the old version of the plug-in and then decided to test with the last version of the plugin (5.2) and made a great discovery.

  Engineering simplified our life with the implementation of entity.getInventoryObject ();

  So basically:

  var entity = vCACinventoryObject.getEntity(); // convert an inventory object to an entity
  inventoryObject = entity.getInventoryObject(); // convert an entity to an inventory object
  

  So in your case the code to quickly find a blueprint by name would be:

  if (vcacHost == null) return null;
  var model = "ManagementModelEntities.svc";
  var entitySetName = "VirtualMachineTemplates";
  
  var property = new Properties();
  property.put("VirtualMachineTemplateName",name);
  
  var entities = vCACEntityManager.readModelEntitiesByCustomFilter(vcacHost.id, model, entitySetName, property, null);
  
  var blueprints = new Array();
  for each (var entity in entities) {
      blueprints.push(entity.getInventoryObject());
  }
  
  return blueprints;
  

• I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Anyway is to align the document even if it requires me to crop or lose

  I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Is there anyway to align the document even if it requires me to crop or lose some on the edges?

  Hi brad.

  Yes. You can use the analysis tools to straighten and crop your document. Here is a link to a new tutorial. The key to activate the sliding options recovery is to choose the option of the camera Image in the drop to Enhance, and gives you tools to set the correct page for smoothing areas.

  fundamental https://helpx.adobe.com/Acrobat/How-to/scan-Paper-documents-Searchable-PDF.html?Set=Acroba--principes t - create a pdf file

  Donna.

• Need Adobe XI. DC does not work with the plugins I use.

  I'm on a Mac and I need Acrobat XI as DC does not work with the plugins that I use at work. We have a subscription to the CC. I downloaded the software XI from here: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html but it asks for a serial number. I followed the steps on this page about what to do if you have a subscription, but this brings me to a page that asks you a redemption code to activate my subscription. My subscription is already activated. Is there a way to install XI without needing a series/redemption code?

  Update: I spent 2 days looking how to get this resolved. Of course, 5 minutes after I ask this question, it happens to me on this: https://helpx.adobe.com/content/help/en/creative-cloud/kb/acrobat-dc-uninstalls-acrobat-11 .html , that solved my problem and my installation began through the application of CC desktop, rather than a separately downloaded .dmg file as before. Note: After clicking on the button 'Download Adobe Pro XI', next steps called "Adobe DC", but the end result is an installation Pro XI.