Work with Wifi available/not available

Similar Questions

• Apple TV Airplay works with a MBP, not others

  I have two McBook Pro. Both perform exactly the same version of OS X: 10.8.5.

  The difference is, my ATV 3 appears in the menu bar of one of my Mbps, the mid-2012 and does not appear in the menu bar of my other (Late 2008).

  In 2008 there is one, in System Preferences, under 'The front', a checkbox (checked) that says "see mirroring options in the menu bar when it is available."

  But there is no familiar black triangle in the menu bar.

  However, on my MBP for 2012, in the same place, above the box I have the option "Airplay mirroring" and a drop down menu for, without doubt, regardless of the Apple TV, I want to use. The black triangle is in the menu bar.

  My Apple TV works with this computer, not the other. All three are on the same network. As far as I know, all the preferences on both computers are identical.

  I've seen many threads frustrated on this problem, which many have not been solved, but I have the advantage of having two computers that run the same systems to test.

  Now... What's going on here? I notice the silence of Apple on this issue has been deafening. Fortunately, cela solve for me would be convenient, not essential, because it seems to be with several disgruntled users.

  This document says that MacBook Pros (Early 2011 or later) support AirPlay. The 2008 is just too old.

• RALink RT5390r 801,1 1 b/g/n 1 x 1 wifi adapter in a Pavilion dv6 notebook works with WiFi on 5 GHz?

  The card Ralink RT5390r 801,1 1 b/g/n 1 x 1 wifi in a Pavilion dv6 notebook wireless adapter works with WiFi on 5 GHz? I need to change the network card?

  Hello:

  Any card with a bgn suffix is a single 2.4 GHz single band card.

  A card with agn or abgn is a dual band.

  I doubt you will find a dual band compatible to your laptop wireless card.

  The BIOS has a whitelist which hangs in the cards wireless not supported to be installed.

  The service manual may indicate a card dual band for your model, but the part number will be probably wrong.

• HO OfficeJet Pro 8600: how to remove a static ip address on my HP 8600, using mac 10.7.5 work with wifi

  I have trouble printing through my wifi network. How to remove a static ip address on my HP 8600, using mac 10.7.5 to work with wifi?

  With the help of my NetGear N900 / CG4500BD modem/router with DHCP, there are different IP addresses of the printer, if the printer is connected is 192.168.0.13, when the printer use wifi IP is 192.168.0.20, and on the printer, it shows 192.168.1.142 I think is a static IP address, because it can cause the confussion.

  I appreciate your help, thank you, the Job Dr.

  Hello

  Please go to system-> Network Preferences. Select the airport on the left, and then click Advanced in the bottom right. Switch to TCP/IP and select "using dhcp". Click ok, and then click on apply. After a few seconds, you should get an IP address from the router.

• OCR has worked with xp but not windows 7

  With the help of HP C3180 all-in-One printer and Windows 7, 64-bit.

  OCR has worked with XP but not with 7.  Am I missing something?

  Hello belcanguy

  If scanning with I.R.I.S. only shows the scan to image that says Solution Center? Try I scan a document using the Solution Center and see if you can choose an OCR pdf or RTF document.

• FlvPlayer works with FireFox but not with IE

  Hello
  
  I created an FLV Player to play remote. FLV movie. It works with Firefox but not with Internet Explorer 6 or 7. In fact, when I test locally on my desktop with local (on my desktop). File FLV movie player works in Internet Explorer. The problem seems to be my Web site, when reading remotely. FLV file, it only works with Firefox.
  
  Try my Web site with Firefox and IE 6-7 and you will see only works with Firefox. Movie player (right section) to this remote file access: http://www.wikiguitarist.com/wikiguitarist/images/9/9a/CanonFuntwo.flv .
  
  Since it is a Wikimedia site HTML code is generated from a PHP file. Here is the code that generates the HTML code.
  
  Of Internet Explorer browser only interpret the tag: < embed >?
  Why IE has problem to play remotely. File FLV and not Firefox?
  
  Any idea, suggest code, suggest HTLML, action script...?
  
  Thank you
  Alain
  
  
  
  

  Hi guys,.

  Thank you very much, Jeckyl, you were right, it seems that only FLASVARS is allowed. Nevertheless, I will try to test if I can pass more than one variable/value less a statement of FLASVARS. For the moment, leaving only a statement of FLASVARS the video works fine with IE and Firefox. I'll do a little cleanup, it is true that my generated HTML code is a bit messy.

  Thanks to WindShadow75 for your answer, now you see it works because I removed the additional declaration of FLASVARS.

  Several guys from tanks, it is appreciated!

  WikiGuitarist

• BlackBerry Smartphones can not play youtube video with the 3G network, but works with WiFi, why? Help, please!

  Hello

  I tried several times to read the youtube videos with network wifi and it works fine, but when I use the 3G or GPRS nework to play the video, it first to ask "Switch to WAP for streaming media? (with wifi that he won't ask) so I press ok and it uptempt to load and an error message "content not available. Server is blocked or unresponsive. ", it goes with all the videos I click on that. Help, please.

  Thank you

  Let me share my personal experience on the subject. When they are facing the same problem, I asked my provider and they tried to pull a fast explaining that viewing videos on the 3G network is dependent on the device and that it is not possible to videos on my BB "BOLD" due to speed issues. They even suggested that I buy an iPhone 3G given that subscribers who do not seem to display YouTube videos problems. A load of rubbish! After only a brief workshop organized by RIM and my career, I was "unofficially" informed by a member of staff that it was a TCP/APN issue. I take advice, made the necessary adjustments, and was able to view Youtube videos on the 3 G network without problem. However, my Bill the next month floored me. Even if I'm on a package data unlimited, I was charged an extra $ 70 on top of what I usually pay. Learn more with my carrier, they were kind enough to inform me that I have to access the Internet via their APN address, which translates into a lower speed of AFN, orI will have to pay for accessible data on the other addresses of the AFN. I supported with my questions and my carrier eventually admitted that they were actually limiting the speed on AFN as allowing only some mobile devices to access data at 3G speed. Then you tell me!

• BlackBerry Smartphones BBM, Facebook, etc does not work with WIFI Curve 9300

  TBay such/Rogers provider

  Impossible to use BBM or Facebook with WIFI but another work of apps.  What can be the problem.  The phone says my name of the router at the top.

  I also pay for the data plan.

  Hello

  Start with a more complete explanation - use the following as a guide

  Please provide the following information

  Blackberry model

  The provider name

  Do you have a data Plan?

  Geographical situation

  Operating system Version Menu > Options > about - looks like v5.0.0.681

  Any error or code statement

  Exactly the nature of the problem - the more information the better

  BB is damaged

  Has it been exposed to dirt and moisture - details please.

  When this started and he began just after an update or new App download and what App or download

• Internet constantly stops working, says "WiFi is not a valid ip configuration" and then working again shortly.

  The problem
  I continue to have this problem where my internet no longer works, I always run a diagnosis "fail" (or whatever it is called in English) and he told me that wifi is not a valid ip address configuration and then the internet works again. This can happen several times daily. I think this could be a problem between this PC and the router because the other PC in this Chamber works very well on the internet. My PC works great too when I am connected to other internet connections.
  Solutions
  I tried the fix: open commandprom, type netsh winsock reset catalog, and then type netsh int ip reset reset.log hit.
  I tried the fix: open commandpromt, type ipconfig / renew.
  Info
  PC is a MSI GE60 (i5, GTX 660 m)
  Intel Wireless Driver

  They are models of multiple GE60, each model is supplied with 2 different wireless drivers and I can't know that you have your computer

  AzureWave: http://www.msi.com/service/download/nbdriver-21557.html
  Intel: http://www.msi.com/service/download/nbdriver-21013.html
  You can try both of them, will not bad cause install one incorrect

• cannot use the wheel to scroll with Google Calendar. Works with IE, so not a problem of Google.

  The wheel on my mouse does not work with Google Calendar. It works everywhere else. It also works with Google calendar on IE. That's why I think it's a Firefox issue.

  
  

• Ipencil does not work with the app notes

  Works with paper 53 but not notes or messages.

  Notes seems to have updated and displays now the tilde symbol while pencil works. Mail still does not work.

• The Ralink RT5390 in a Pavilion dm1z wireless card works with WiFi on 5 GHz?

  I have a Pavailion dm1z, which uses the Ralink RT5390 wireless card. I have a router dual band with WiFi networks on 2.4 GHZ and 5 GHz. The dm1z is unable to pick up the SSID in the 5 GHz range, it can for the 2.4 GHz band. Is the Ralink RT5390 card dual wireless broadband? Can it captures my 5 GHz wireless network? If this isn't the case, allow new drivers for it? Or the dm1z can be updated to capture the WiFi in the 5 GHz range? What other options I have to do the 5 GHz WiFi?

  (5 or 2.4 GHz) USB adapter should work well on the laptop.

• SimplePass only works with IE and not other browsers

  SimplePass v5.20.205a should work with other browsers like Chrome or Firefox?

  On my dv7-4295us w / Win7 - 64 bit, SimplePass only works with IE8/9. Use IE, suddenly me in connects to the listed sites. With Chrome or Firefox, suddenly won't open the password manager. After scrolling to and by selecting the entry with the correct connection info, an instance of IE opens and connects me.

  If Firefox is set as the default browser, one touch opens the password manager. You select the Web site, a warning message (Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program.)

  If Chrome is the browser default, one touch opens the password manager. The selection of the correct entry, results in a new instance of Chrome to open to my home page.

  BTW - the link for help does not (never) bar of tasks or SimplePass inside.

  Cognizer,

  Welcome to the Forum!

  Firefox will work with your version of SimplePass, called Digital Persona.

  The limitation is that you must use a PREVIOUS Firefox version: ~ 3.6 28

  Download of Firefox 3.6.x

  If you're ready to do this (use the old version), then you can use all the sites to your connections and also use the HP connection to access your account on your computer when it starts.  This old version of Firefox also works very well with IE8/9.

  You can update Firefox to the bosom of the version 3.6.x, when they ask... just don't get excited and upgrade to the latest Firefox or Simplepass balk.  Tip: You can keep a copy of your download 3.6.x autour just in case you lose the installation or something else happens and you need to reinstall Firefox later.

  IE8 is quite Rocky.  If you have no choice, be it, immediately update IE9.

  I don't know about Chrome.  Couldn't get anything to work with it.

  ----------------------------------------------------------------------------------------------------------------------------------------------------

  I hope this helps!

  We work hard to help!

  Whenever you see a useful Post - click on the Star Bravo on the left as a thank you!

  Doesn't have this Post solved your problem?  Mark "accept as Solution!

  Note: You can find the box "Accept as Solution" on threads started by you.

  2012 the year of the Dragon!

  Dragon tips:

  SimplePass flavoers Digital Persona and HP SimplePass 2011 / 2012 are MATERIAL dependent.  This means that your computer hardware dictates what kind of software SimplePass, you should run on your computer.  If you run Digital Persona SimplePass style, you must continue to run such - at least for now.  The software code is different, and are the two types are not interchangeable.

• Logitech USB Headset comfort micro works with XP, but not with Windows 7

  Hello.  I recently got a new computer with Windows 7.  I also have one with XP Pro.  My Logitech Comfort USB headset works great with my XP computer, but the microphone on my headset does not work with my computer of W7.  The headphones work fine, I can hear loud and clear.  There is no problems appearing in Device Manager.  Windows installed all the drivers when I plugged it in, it recognizes my helmet and said that it works correctly.  I ran the function of problem solving and it's supposed to be working very well.  Plug into my XP computer and it works fine.

  I tried several 'solutions' Troubleshooting over the few days without result, including the verification of all the sound levels (all 100%), ensuring that drivers is common (they are), to tweak the settings sound in various ways, (possibly reset to defaults), making sure Windows is up to date, blah blah blah.  The Compatibility Center Windows says that my helmet is compatible with W7.

  I looked everywhere and, with the exception of when someone has their Mute microphone or set low volumes, there doesn't seem to be a response to this problem, but there are a lot of people who have this and not only with Logitech headsets.

  Logitech forums say that it is a Microsoft problem, W7 has a compatibility problem.  I don't know what else to do to get my microphone to work.

  I would really appreciate any suggestions beyond the ones I've tried.   Thanks in advance.

  Moki

  Hi Moki-mo,

  The headphones came with the installation software? If so, install the software on the Windows 7 computer. If this does not resolve the problem, visit the Windows 7 Compatibility Center to make sure that the headset is compatible with Windows 7.

• VMware Guest works with IPv4 and not IPv6 - ideas everything?

  Well, have a little patience with me. I have a very complicated setup which works perfectly with IPv4, but does not work with IPv6. I hope that one of you superstars can help me to understand how to enable IPv6. Here are the basic configuration:

  
  

  Mac mini:
  

  • Mac mini (end 2012) Mavericks 10.9.5 and VMware Fusion 7.1.0 Server
    • A KDLINKS up one1 account USB 3.0 to Gigabit Ethernet adapter is installed. It is functionally identical to all other brands of USB3/Gigabit Ethernet, which is based on the 6 AX88179 chipset adapter; which is the latest version.
    • (I have another identical USB 3.0 to Gigabit Ethernet adapter, still in the box, do not set, in case this might help the solution.)
  • The most recent 6 Mac driver is installed in the Mac mini, downloaded from ASIX. (The driver on the driver of the KDLINKS Web site is a little older).

  Internet connection:

  • Our Internet connection is a regular cable modem. The cable modem is a simple bridge, Ethernet cable. He gets a public (Internet) IP address on the ISP using DHCP Ethernet interface, as you can imagine.

  VMware Fusion Guest - a firewall device:

  • The VMware Fusion guest is a firewall device. Here's its network configuration:
    • The internal interface is bridged to the Mac mini integrated Ethernet adapter. It has a private IP (10-net). It serves as a one-stop shop for all of your home LAN.
    • The external interface is bridged to the USB/Ethernet adapter. The device of host firewalls Gets the address public Internet IP from the ISP via DHCP.

  Mini Mac Network Configuration:

  • Network Configuration Mac mini (OS X System Preferences network 10.9.5,):
    • The Mac mini integrated Ethernet is configured with a fixed IP on the LAN private address and is configured to use the private IP address of the firewall device of comments as the gateway and DNS server.
    • Adapter USB/Ethernet of the Mac mini is defined as:
      • Configure IPv4: Off
      • Advanced... Configure IPv6: Link-local only
      • The goal is to ensure that the Mac mini can be reached or attacked from the Internet. All Internet traffic should be a device of host firewalls.

  Totally works with IPv4.

  Surprisingly, this all works with IPv4 without any problem whatsoever.

  
  

  IPv6 taken in charge by the provider of Internet services and tested with Time Capsule:
  

  There is no problems with IPv6 when I use an Apple Time Capsule as the firewall / router between the home network and the Internet, using the same cable modem. It is easy to configure, and IPv6 works inside the LAN House and all as well go to the servers on the Internet that support IPv6. Tested, working, as expected.

  I'd do it want to use this device to host VMware Fusion as our firewall router firewalls House for IPv4 and IPv6, the time Capsule not.

  THE PROBLEM:

  The device of host firewalls cannot acquire an IPv6 address of the ISP. He obtains an IPv4 address, but not an IPv6 address.

  THE QUESTION:

  What can I do to make the apparatus of host firewalls acquires an address IPv6, the same way as did the Time Capsule?

  • The Mac mini (host) does not expose its interfaces directly to the Internet.
  • The Mac mini (host) would carry its IPv6 Internet traffic via the comments, the same as its IPv4 Internet traffic firewall application.

  Any suggestions would be greatly appreciated.

  I solved my problem. It was a setting of configuration of the firewall of comments and had nothing to do with VMware Fusion. Here are the details, in case others have the same problem:

  Comments firewall device has been configured as a gateway IPv4, but not as an IPv6 gateway. As a result, the firewall received a single IPv6 address of the ISP. It was a 128, of course.

  Once I enabled the 'IPv6 Default Gateway' setting for the interface external unit of firewall of comments (which translates as the USB3/Ethernet interface to the cable modem) and rebooted the modem cable and firewall, the firewall has asked an IPv6 network block instead (a 64 network). After that, everything worked as expected.

  I know that nobody has answered this detailed query, but I know that a lot of people read it. Thanks for taking a peek. I hope this solution helps others.