Workers with different retention periods?

Similar Questions

• How to work the optimization backup and the backup retention period?

  I'm a little confused on how these 2 features will work together.
  
  Incase I enabled optimization backup and have retention backup value someday. Then I have this tablespace 'users', which is read-only. Please let me know if my understanding is correct.
  
  Date................ Action................................ Backup
  -----
  Monday... Full backup... 'users' saved
  Tuesday... Full backup... 'users' unsaved
  Wednesday... Delete Obselete... backup 'users' deleted
  Thursday... Restore database...?
  
  I was wondering if at Thursday I'm still able to restore the database if tablespace 'users' are deleted?

  Hello;

  Someday - the retention value, it is much too low. You may lose more than your example of demand. Set the highest. (Start with 2 or 3 and test, test, test)

  How backup works of optimization in what concerns the retention policy?

  RMAN only works with files during the retention period.

  For example, consider a backup optimization with a retention period of 5 days.

  RMAN will only compare the data file with backup within the period of 5 days games - even if the data file it as backup has not changed in this 5 days.

  So be very careful. Given your political retention is so low, I would not use optimization.

  I was wondering if at Thursday I'm still able to restore the database if tablespace 'users' are deleted? Very good luck, you will lose data.

  Test your period of detention inside and outside before look you at optimization.

  Best regards

  mseberg

• NATting even address public ip with two periods of internal investigation with different ports

  Hi people,

  Can I use the same public IP for two internal investigation periods different with different ports and I can even user public IP for two periods of different internal investigation with the same ports

  static (inside, outside) tcp 115.248.153.252 192.168.22.19 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.19 http netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.20 http netmask 255.255.255.255

  static (inside, outside) 115.248.153.252 tcp https 192.168.22.20 https netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 192.168.22.21 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.22 http netmask 255.255.255.255

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

  No, you cannot use the same public ip address NAT on two internal IP address different using the same port.

  static (inside, outside) tcp 115.248.153.252 192.168.22.19 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 192.168.22.21 6303 6303 netmask 255.255.255.255

  For the static PAT 2 above for example, when traffic is coming to 115.248.153.252 IDE oucederomsurlesecondport 6303, ASA would not know if NAT it back to 192.168.22.19 or 192.168.22.21, because both use the same port.

• ASM diskgroup with different disc size

  Hello
  
  DB: 10.2.0.4
  Operating system: AIX 5.3 64-bit L
  
  I have installation on 10g RAC ASM with node 2. It has the only Eve on ASM.
  
  Total DB size is 250 GB.
  Total size of FRA is 700 GB.
  
  My FRA diskgroup to archivelog (also holds multiplex controlfile) each size of 50 GB drive. Even if I set the retention period for 1 day, backup to disk, rman getting failed, due to space issues. So I manually delete obsolete data report and rerun backup.
  
  I want to add the workspace to FRA diskgroup regarding adding disks to FRA diskgroup. But, I have 100 GB drives available , it's not the same waist size of current existing FRA disc (50 GB).
  
  Here's my question
  
  (1) that I can Add the size different to the same diskgroup disc ?. If I add, are there performance problems?
  My all data files are out of FRA diskgroup and there are someother diskgroup.
  
  (2) if FRA diskgroup 50 GB and 100 GB of disks, and then how the archivelog and backup data will be erased?
  Will the data stored up to 50 GB in all disks in FRA, even * 100 GB * disc is?.
  
  (3) while doing recovery with different size of disk at diskgroup, what kind of problems can I face in performance wise?
  
  (4) can I remove any diskgroup 50 GB disks and add the 100 GB drive, so that I can increase the size of the disk in the same diskgroup?. I'll remove it and add at the same time.
  
  (5) add disks redundant external diskgroup , I'm ok with the following query?
  
  ALTER DISKGROUP FRA add DRIVE ' </dev/rhdsk1 >', </dev/rhdsk2 > ', </dev/rhdsk3 > ';
  
  
  Please help me on my doubts above.
  
  Thank you and best regards,
  Therese

  Hi Sunand,

  (1) can I add different diskgroup disc even size?. If I add, are there performance problems?
  My all data files are out of FRA diskgroup and there are someother diskgroup.

  A minimum of four (Oracle ASM disks) LUNS of equal size and performance is recommended for each disk group

  (2) if FRA diskgroup 50 GB and 100 GB of disks, and then how the archivelog and backup data will be erased?
  Data are saved up to 50 GB in all disks of FRA, same 100 GB drive is it?

  Oracle ASM data distribution policy is based on the ability. Ensure that the Oracle ASM disks in a disk group have the same ability to maintain balance.

  (3) while doing recovery with different size of disk at diskgroup, what kind of problems can I face in performance wise?

  Ensure that all Oracle ASM disks in a disk group have similar performance characteristics and the availability of storage. In configurations of storage with dimmers of mixed speed, for example, 10 K and 15 K rpm, i/o performance is limited by the slow speed control.

  (4) can I remove any diskgroup 50 GB disks and add the 100 GB drive, so that I can increase the size of the disk in the same diskgroup?. I'll remove it and add at the same time.

  Yes. First, you add the 100 GB drive and then remove the drives from 50 GB.

  (5) to add disks to external redundancy diskgroup, I'm ok with the following query?
  ALTER DISKGROUP FRA ADD DRIVE ",", ";

  Redundancy is controlled by the diskgroup. Then simply add the disks.

  e.g ALTER DISKGROUP FRA ADD DISK '/dev/rhdsk1', '/dev/rhdsk2', '/dev/rhdsk3';
  

  See doc below... Here are all your anwser.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14231/storeman.htm#i1014729

  Kind regards
  Levi Pereira
  http://levipereira.WordPress.com

• Questions on the retention period of Audit SACLS log (FS7600-FluidFSv4)

  Hello

  To save the audit log SACL for a year.

  However, I couldn't find the setting of shelf life.

  I have two questions.

  1.) is it possible to change the retention period?

  (2.) what is the default value of the retention period?

  Please me advice.

  Config #SACL # #.

  Node0:supportShell > cliUtil management

  CLI > NAS - volumes change advanced settings - - SACLAuditPolicy< success&failure="" failure="" success ="" none="">

  CLI > display NAS-volumes

  CLI > list audit events

  #####

  Better subject.

  Kensuke Maeda

  Kensuke-san,

  My apologies for the late reply.  The journal of the SACL allows to store up to 100 000 events before flipping and overwrite older events.   There is no way to change this value.

  With respect,

  Don Williams

• backup with the retention policy to recovery of N days window

  Hello

  I did command to create an incremental backup of database with the configuration:

  run

  {

  Configure retention policy to recovery of 14 days window;

  backup incremental level 1 cumulative

  tag daily_incr_14_days

  database

  more archivelog delete all input;

  }

  All parameters are set to their default values, and backups of data goes to FRA. I've got catalog recovery connected and all the views RC_ at my disposal.

  (1) is it possible to know which window of recovery has been used for any command in the rman backup or query view RC_ or local database (control file information)?

  (2) if I use other settings of window of recovery with command configures which would overlap or report rman commands do?

  BR

  Sandrine.

  TenakaKhan wrote:

  Mahir,

  Thanks for the reply - in other words, this window of recovery should be used mainly for maintenance purposes (overlap, remove obsolete, report need backup etc.) and he was not associated with the actual with backup items as retention period "keep until the" safeguard clause... command database (this information are saved with the backup as I could verify according to rc_backup_set of the recovery catalog)?

  Yes.

  Maintaining backups RMAN and repository & nbsp; Reviews

  keepOption

  backup retention policy

  A policy defined by the user to determine how long the backups and archived logs must be kept for the media recovery. You can define a retention policy in terms of redundancy backup or a recovery window.

  RMAN keeps backups of data files that are required to meet the current retention policy, and all logs archived redo necessary to a complete recovery of data files.

  Recovery window

  A recovery window is a type of RMAN backup retention policy, in which the ADMINISTRATOR specifies a period of time and RMAN ensures the retention of backups and Archives redo logs required for recovery to point-in-time at any time during the recovery window.

  The interval always ends at the present time and is extended in time for the number of days specified by the user. For example, if the retention policy is set for a window of recovery of seven days and the current time is 11:00 Tuesday

  RMAN maintains the necessary backups to recover point-in-time at 11:00 the previous Tuesday.

  Concerning

  Mr. Mahir Quluzade

• Maintaining the ADDM snapshots beyond the retention period

  Hello
  
  I have a dozen instant ADDM I want to keep for further inspection and not the eliminated after the retention period, I put currently.
  Does anyone know how to do this? I don't really want to be specified as baselines

  Hi Jim

  You can create the basis for this particular period and maintain baseline indefinitely. Until the base line is deleted with CASCADE-online set to TRUE, the snapshots will be kept.

  Begin
    dbms_workload_repository.create_baseline (start_snap_id => 2345, end_snap_id   => 2467,baseline_name => 'retain_forever_baseline');
  End;
  /
  

  After you are finished, you can remove the base line.

  Exec dbms_workload_repository.drop_baseline (baseline_name-online 'retain_forever_baseline', cascade-online true);

  If you want to remove the base line BUT always keep snapshots, you can use cascade-online fake

• Yosemite: Why 'Shares and Permissions' displays 2 all users with different privileges?

  Some folders and files inside my user folder sharing and permissions like this:

  

  I can remove the user from "search...". "(a user who has been deleted and no longer exists) but I don't know what to do on both"all"users with different permissions. I can't delete the one with custom privileges. Help!

  Solved by Leroy Douglas. See What are these custom privileges?

• Photos with different apple id: s

  Any way to sort photos taken with various apple id: s in photos for mac? I have three different iPhones that has been moved from parents to children. Is there anyway to sort images with different apple id: s? I heard that there is way to sort different (smart folder) with the model of phone, but this is not enough cause phones were used earlier by the parents. And I want to use only a single library of pictures, so the different IDs: s for mac is not the solution. It would be nice to get this functionality.

  You can use smart albums with a combination of constraints: the model of the iPhone and the date rank when the iPhone has been used by a person in particular. If the iPhone has been in use you make in the years 2012 and 2013 creates a smart album that will check for the ipHone and the date range.  Then announces a keyword "Photo by Me" of all the photos in this album. Do the same for the other ranges of iPhones and date and assign the photographer as a key word.

  If you keep marking new imports with a keyword of photographer then you can create smart albums for every photographer.

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• HP12C Platinum: How to calculate the EMI with a grace period?

  I'm figuring the tranche of loan compared to a loan with a grace period.  This can be done easily using MS Excel, but I need to do the calculation using my HP12CP.

  Details of the loan:

  Main: 1 million

  Interest rates. : 12% p.a.

  Tenor: 36 months

  Period: 3 months

  Payment frequency: monthly

  Loan annuity calculated with Excel: Q1 - zero; 4th in the 36th month: 36 810 /-per month

  Hello MilanH

  Perhaps this allows, if you train in two steps:

  1)

  n = 3 grace period

  IR/a=12%

  PV = 1 million

  FMT = 0.00

  FV =-1030301.00 (-because you have to pay it back)

  2)

  n = 33

  IR/a = 12%

  PV = 1030301.00

  VF = 0.00

  FMT = 36810.01 (-because you have to pay)

  I have no 12 c, but if this kind of loan is not built in, you can manage this way.

• iCloud full - found two backups with different dates

  My 20g iCloud storage is full.  When I went to manage my data, there were 2 backups of my iPhone with different dates.  Can I remove 1 of them (the older one I guess) without affecting my current phone?  I guess that's when I upgraded my iPhone 4 to 5

  Of,.

  Yes, as long as you can identify with certainty the backup latest.

  

• The ipad pro supports multiple monitors with different content on each screen?

  I want to replace my laptop with an ipad pro.  Currently I drive three screens with my laptop, all with different content (VGA, HDMI, laptop screen) with no additional adapters.  The Ipad pro has a video card that will allow me to run multiple monitors (3 including the pro) with different content on each monitor?

  Given that the pro iPad running iOS and iOS do not supports multiple monitors, I would say no. I may be wrong, so feel free to correct me.

• I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I would get one that has 4700 comments already.

• How to structure the DMA buffer for SMU 6341 DAQ card for analog output with different frequencies on each channel

  I use the outgoing/incoming analog DDK with the DAQ 6341 SMU map.

  The examples, for example aoex5, show a single timer (method outTimerHelper::loadUI), but the example shows the DMA loaded with same size of vector data.

  There is a comment in the outTimerHelper:call rogramUpdateCount, which implies that memory sizes different pad per channel can be used.

  (the comment is: switching between the sizes of the various buffers is not used)

  Nobody knows what should be the format the DMA buffer for data from multiple channels with different frequencies?

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  Hello Kenstern,

  Data are always intertwined since each card has only a single timing for each subsystem engine.

  To AO, you must specify the number of samples that will be released to the AO. You also specify the number of channels. Because he didn't is that a single engine timing for AO, each AO will be channel will be updated at the same time to update clock tick. Data will be interlaced exactly as shown in the example because each channel AO needs output at each tick of the clock to update. The data itself can change depending on the frequency you want to copy.

  kenstern wrote:

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  In your example, you must come with an update rate that works for the two waveforms (sine waves of 1 and 1.5 KHz). To get a good representation of a sine wave, you need to update more than 10 x faster than your fastest frequency... I would recommend x 100 if possible.

  Update frequency: 150 KHz

  Channels: 2

  Then create you stamps that include complete cycles of each wave you want to produce based on the frequency of update. These buffers must also be of the same size.

  Buffer 1: Contains data for the sine wave of 1 KHz, 300 points 2 cycles of sine wave

  Buffer 2: Contains data for the sine wave of 1.5 KHz, 300 points, 3 cycles of sine wave

  You can Interleave them as before. When the data are performed through the ADC, they are out different sine waves, even if the AO channels are updated at the same speed.