Questions on the retention period of Audit SACLS log (FS7600-FluidFSv4)

Similar Questions

• Maintaining the ADDM snapshots beyond the retention period

  Hello
  
  I have a dozen instant ADDM I want to keep for further inspection and not the eliminated after the retention period, I put currently.
  Does anyone know how to do this? I don't really want to be specified as baselines

  Hi Jim

  You can create the basis for this particular period and maintain baseline indefinitely. Until the base line is deleted with CASCADE-online set to TRUE, the snapshots will be kept.

  Begin
    dbms_workload_repository.create_baseline (start_snap_id => 2345, end_snap_id   => 2467,baseline_name => 'retain_forever_baseline');
  End;
  /
  

  After you are finished, you can remove the base line.

  Exec dbms_workload_repository.drop_baseline (baseline_name-online 'retain_forever_baseline', cascade-online true);

  If you want to remove the base line BUT always keep snapshots, you can use cascade-online fake

• Licenses - Question about the grace period of 14 days.

  How the grace period is managed if an ESX host is turned off for a period of time, like a month, then power turn it back on and unable to reach the license server?  The grace period of 14 days begins when it is on, or ESX believes only started at the last moment that he was able to contact the server?

  I have a scenario where some hosts will be part of a mobile and potential system could not stay powered off during long periods of time.  I would like to put the license server in a virtual machine in order to avoid the additional equipment is necessary, but I won't be able to power on this virtual machine if the host was off more than 14 days and the grace period expires.  Someone at - it experience with this?

  Hi Jay,.

  I inadvertently tested earlier (turning off an ESX host with a virtual top license server and turning back on 18 days later after that I came back from vacation). The answer is as you put it to the point: you're in trouble since the host ESX cannot find a license server, therefore refusing to power on all virtual machines running (including the license server). In a mobile scenario, you should consider using licenses of the host instead of a license server (which runs on VI3 and vSphere 4).

  Best regards

  Tim

• How to work the optimization backup and the backup retention period?

  I'm a little confused on how these 2 features will work together.
  
  Incase I enabled optimization backup and have retention backup value someday. Then I have this tablespace 'users', which is read-only. Please let me know if my understanding is correct.
  
  Date................ Action................................ Backup
  -----
  Monday... Full backup... 'users' saved
  Tuesday... Full backup... 'users' unsaved
  Wednesday... Delete Obselete... backup 'users' deleted
  Thursday... Restore database...?
  
  I was wondering if at Thursday I'm still able to restore the database if tablespace 'users' are deleted?

  Hello;

  Someday - the retention value, it is much too low. You may lose more than your example of demand. Set the highest. (Start with 2 or 3 and test, test, test)

  How backup works of optimization in what concerns the retention policy?

  RMAN only works with files during the retention period.

  For example, consider a backup optimization with a retention period of 5 days.

  RMAN will only compare the data file with backup within the period of 5 days games - even if the data file it as backup has not changed in this 5 days.

  So be very careful. Given your political retention is so low, I would not use optimization.

  I was wondering if at Thursday I'm still able to restore the database if tablespace 'users' are deleted? Very good luck, you will lose data.

  Test your period of detention inside and outside before look you at optimization.

  Best regards

  mseberg

• Question on the Distributor AW at the IPCC 7.0

  Hi all

  I have a question about the AW. When I restart the service AW, but I has not restarted the router of appeal and recorder service, I want to know if the recorder data will be synchronized in the AW DB when AW service is OK.

  All effort will be appreciated.

  Thank you & best regards

  CAI Yi

  Hello

  Data of AW databases are synchronized when th distributor returns once again.

  Configuration data are filled with the latest data in the configuration database of recorder, and all registers in the historical data in the paper are sent to the HDS, if you have configured a HDS instead of Distributor.

  You must take into account the retention period in Data Logger and the HDS, for historical data, so if you have problems in the AW, for example for 5 days and your retention period in the historical tables of the recorder is 4 days, when the AW synchronizes with the recorder you will have lost the historical data of these four days.

  Hope this helps,

  Juan Luis

• Considerations to keep the retention of RMAN backup for 1 year

  Dear all,

  We use 10 g 2 2-node CCR on Windows Server. We use Netbackup Symentec 7.5 for the backup of Oracle databases. We want to change the retention period of the RMAN backups for 1 year. Another change that the window recovery from RMAN backup at 365, what are the other considerations (any other configuration change, another point etc.), we should be aware of?

  Best regards

  Riaz

  Your controlfile would spend unusually large.  It can result in CF-queue waiting for when the generation of the archivelogs and performing backups.

  Hemant K Collette

• I just bought Adobe audition on creative cloud, and it does not work. Said that the trial period is over

  I just bought Adobe audition on creative cloud, and it does not work. Said that the trial period is over

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  [moved from the download, installation, commissioning of Adobe Creative Cloud]

• A few questions regarding the audit

  Hi all
  
  
  
  Greetings. I have a few questions regarding the audit.
  
  
  1. how to enable auditing for create table and truncate table by a user?
  
  

  SQL> audit table by schema_name;
  
  Audit succeeded.

  Fact the knowledge of the above: http://psoug.org/reference/auditing.html
  
  This succeeded. But when I actually created a table, it does not reflect in the dba_audit_trail;
  
  
  Do I have to use the number of action by and then combine it with another table to populate the create table/truncate table?
  
  
  2. How can I check what all auditing has been activated so far?
  
  
  Please suggest me. I am unable to follow the audit to create and truncate.
  
  
  Concerning
  KK

  In the above article that I mentioned earlier it said check the dba_audit_trail table.

  COLUMN username FORMAT A10
  COLUMN owner    FORMAT A10
  COLUMN obj_name FORMAT A10
  COLUMN extended_timestamp FORMAT A35
  
  SELECT username,
         extended_timestamp,
         owner,
         obj_name,
         action_name
  FROM   dba_audit_trail
  WHERE  owner = 'AUDIT_TEST'
  ORDER BY timestamp;
  
  USERNAME   EXTENDED_TIMESTAMP                  OWNER      OBJ_NAME   ACTION_NAME
  ---------- ----------------------------------- ---------- ---------- ----------------------------
  AUDIT_TEST 16-FEB-2006 14:16:55.435000 +00:00  AUDIT_TEST TEST_TAB   CREATE TABLE
  AUDIT_TEST 16-FEB-2006 14:16:55.514000 +00:00  AUDIT_TEST TEST_TAB   INSERT
  AUDIT_TEST 16-FEB-2006 14:16:55.545000 +00:00  AUDIT_TEST TEST_TAB   UPDATE
  AUDIT_TEST 16-FEB-2006 14:16:55.592000 +00:00  AUDIT_TEST TEST_TAB   SELECT
  AUDIT_TEST 16-FEB-2006 14:16:55.670000 +00:00  AUDIT_TEST TEST_TAB   DELETE
  AUDIT_TEST 16-FEB-2006 14:17:00.045000 +00:00  AUDIT_TEST TEST_TAB   DROP TABLE
  
  6 rows selected.
  
  SQL>
  

  Have you reviewed this table?

  Alternatively, you can consult the table of dba_stmt_audit_opts.
  DBA_STMT_AUDIT_OPTS

  Published by: Kerri_Robberts on July 15, 2011 15:11

• Basic question on redundancy as the retention policy enforcement

  DB version: 11 g
  
  I intend to implement a differential incremental backup of my database. My strategy is
  

  Sunday -->     Level 0 backup
  Monday -->     Level 1 backup
  Tuesday-->     Level 1 backup
  Wednesday-->     Level 1 backup
  Thursday-->     Level 1 backup
  Friday-->     Level 1 backup
  Saturday-->      Level 1 backup
  
  Again, the new weekly backup cycle starts
  Sunday -->     Level 0 backup
  Monday -->     Level 1 backup
  .
  .

  Set on the Recovery window retention policy
  ==========================
  
  I understand that recovery window retention policy: If I set up

  'CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;' 

  This means only these backups that are older than 7 days will be reported as obsolete when executing the command "remove obsolete.
  
  Retention set on redundancy policy
  =============================
  
  But I'm a little confused about the retention set to redundancy policy:
  
  Does

  CONFIGURE RETENTION POLICY TO REDUNDANCY 3;

  say that you keep 3 copies of backups on different locations on disk? How does this fit with my above mentioned incremental backup strategy?

  REDUNDANCY is 'Keep' copies

  The BACKUP is 'Create' copies of

  Copies which exceed the requirement of REDUNDANCY become OBSOLETE.

  Hemant K Collette

• Question about the reports and data of rollups

  We followed in place that I need to create monthly reports. There is a custom agent that collects two key all measures that can be used to define a percentage of system availability. They check essentially two types of errors that may occur together or individually. I have not really used reports in Foglight but has spent a good amount of time to play with them today. The main problem/issue I have at this point is how to deal with the accumulation of data. Our retention policy performs three stacks of separate data in a month, how can you effectively report on these data rolled upward?

  Example: one of the agents simply return a 0 if the system is ok and 1 if it finds the error. In the end, we just need to know how many times that 1 has been returned in a month. How would one accomplish? If the sum is for example, 40 for a total of 4 hours is that it means that he met the 40 times error? The frequency of the agent is set to 60 seconds, so that would mean 40 minutes of time error...?

  The other control agent returns specific error codes and not a simple binary value. If the above example or the question is trivial I still don't know how to deal with this one...

  Most likely, you can use the value of the sum for the metric, just as you might have guessed.  Because the value is 0 or 1, the amount will be the total of the values for the time period.  There are also a number of samples, which should / could be higher because there might be 0.

• Equium L20-264: Question on the actual battery life

  Hi Forum: I know that I need PA3420U-1BRS battery as a replacement for my laptop. Can someone tell me what the real battery life is that I can't find any information on this.

  Thank you.

  Hello

  It is not easy to say, and that it is not generally answer on this question.
  The life expectancy of the batteries depends on the use of portable computers. The use of programs and applications heavy and high performance decreases battery life.

  However, you can charge the battery about 500 times. After this period, the battery performance decreases.

• What is the grace period for Software Assurance renewal after the expiry

  What is the grace period for Software Assurance renewal after expiry?

  What is the grace period for Software Assurance renewal after expiry?

  Hello

  We cannot help with this question.

  You must contact the dealer who sold you the subscription.

  More information is at the following link.

  Microsoft - Microsoft Software Assurance Volume Licensing:
  http://www.Microsoft.com/licensing/software-assurance/default.aspx

  Concerning

• Windows 2008 - what happens if it does not activate in the grace period?

  Hello

  I know it is a forum for Vista but everything on the web seems to tell me that way...

  In our Organization, we plan on using KMS for activation of our Windows 2008 servers (we have only 2 of them at the moment). However what I read you need at least 5 physical servers Windows 2008 (not the Virtual Machines) before they will start to activate.

  My question is: what will happen to the Windows 2008 servers if they do not activate the grace period?

  From what I can tell they should keep normal operation (reduced functionality Mode has apparently been removed from Windows 2008) but will be many notifications to activate me now whenever you log on to the server.

  Thanks for your help.

  http://www.Microsoft.com/windowsserver2008/en/us/product-activation.aspx

  Read the MS link above. Mick Murphy

• Need help on "flushdns" script and 'freeing the INVESTIGATION period' under ipconfig

  Hello, I am fairly new to scripting.  I was wondering if there is a way to create a script in shutdown.exe to clear the dns cache, and then release the INVESTIGATION period, when I stopped the machine.  If anyone can help me with the syntax on how to create it, I would appreciate it.  This is for XP, but I guess it works even under Vista as well

  ~

  Also how can I disable the pop-up window step boring, stupid when I submit a new question or discussion in the forum?  It covers a part of the message body and whenever I click on the ground, it reappears again.

  I don't see any option in the Shutdown.exe to perform one of these tasks, however, I see no reason why you could not create a batch file that is running "Ipconfig/flushdns" to clear the DNS cache, followed by "Ipconfig/Release" to broadcast the DHCP address and finish first by "stop s" to shut down the computer

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Windows Backup & restore leaves gaps in the backup period date ranges

  I noticed that backup & restore leaves gaps in the date ranges displayed on the screen of backup periods under the function to manage the space.  This means that files change during the interval periods have not been saved?  For example, the screen shows currently backups and the following periods:

  Jan 26: 12-18 Mar, 12 GB 10.40

  Apr 04, 12-13 Apr, 12 GB 19.62

  27 April, 12-27 Apr, 12 GB 05.16

  May 06,12 - May 06,12 02.41 GB

  May 27.12 - 17 Jun, 12 GB 03.41

  What is the importance of gaps?

  How can I tell that B & R is fully backup all files that changed since the last backup run?

  How can I varify the 1st backup is a backup full?

  How can I varify that the system image backup is up-to-date?

  I save approximately once a week to a USB external hard drive. I use options "Include a system image" and "Let me choose" to select the files and have selected the option 'keep only the last frame system & minimize the space used '.

  Hello

  Backups are created in sets called backup periods. To maximize your disk space, Windows backup backup all folders selected, the first time it's run and then it only backs up files that are new or have been modified since the last backup was made. Periodically, Windows creates a new, full backup. Each full backup is called in a backup. When you view your backups of files, you can see all the backup periods with date ranges. If you decide to delete backups of files, you should always keep the most recent backup of the file.

  Reference:

  Should what backup settings I use to maximize my disk space? http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore