Workflow configuration issue

Similar Questions

• Bug in workflow configuration of e-mail.  reverse fromName and fromAddress.

  Oh VMware why laugh you at me then?  I found a bug that made me think that I was losing it.  The workflow configuration for default e-mail settings to reverse the fromName and fromAddress.  See my screen capture attached.  You will clearly see that the last two parameters in the call to ConnectionManager.save () are returned.  Do I need to submit a bug report via support or post here enough?

  Paul

  Hello

  A patch for the plugin from mail is provided containing the fixed workflow.

  Follow the link - version Technical preview of VMware Orchestrator plug-in for mail vRealize

• SCRM Workflow + sourcing issues approvals

  Hello
  
  I'm testing the workflow SCRM, implemented, and just to be clear on the following problem:
  
  When I need to add a user/group in the owner section, for example, the system allows me to put the author + another user.
  Assumed that 'author' would be the workflow creator (me), then how is I possible to set up another user = author as the owner of the workflow?
  
  In addition, what is the impact of the 'optional' field be checked? could you please give me some examples?
  
  Finally, when create a sourcing I would need to complete the vendor item field and the provider of the Pavilion signed spec.
  I guess that the provider element would be the number of suppliers of cross-reference in another system. Am I wrong?
  When should I check the spec supplier signed instead? When is it necessary? Could you please give me some examples to better understand the need for the provider to sign an agreement of supply?
  
  Thanks and greetings
  Daniele

  "When I need to add a user/group in the owner section, for example, the system allows me to put the author + another user.
  Assumed that 'author' would be the workflow creator (me), then how is I possible to set up another user = author as the owner of the workflow? »

  The 'Author' token represents the origin of the Sourcing or GSM approval specification. To configure other users as owners, you must add them to the grid of owners during the stage. The first stage and the terminal stage do not have the option grid owner. The user Administrator's Guide discusses this further on page 7-10

  "In addition, what is the impact of the 'optional' field be checked? would you please give me some examples? »

  You can do as an option for the user to select an owner, requestee recipient or notification is signed. This means the end user during the workflowing the object could choose to not choose an of these. If the selection was not marked as optional the user could be said that they have to choose something before continuing. For example, if you wanted all members of the labelling group to notify that you would as an optional choice for the specification or end user workflowing approval of sourcing. If you allow the end user to decide when and who should be notified that you do as the optional selection.

  "Finally, when create a sourcing I would need to complete the vendor item field and the provider of the Pavilion signed spec.".
  I guess that the provider element would be the number of suppliers of cross-reference in another system. Am I wrong? »

  It could be and you may manually fill the cross reference associated with this provider in the field of # article provider.
  This could also be a temporary number that you use for the equipment of the provider until it is approved/bought material with a cross reference assigned.

  "When should I check the spec supplier signed instead? When is it necessary? Please give me some example to better understand you the need for the provider to sign a certification of sourcing? »

  Signed provider Spec means that the provider has literally approved specification and accepts provider what dictates the specification. It allows you to say that they closed, what date they were signing on the specifications and all the other reviews which are necessary around this approval. There is another feature, that you can use to automate this sign off the coast. You can send the specification of a supplier, have them checked, then they can approve or reject supplied hardware like the precepts of the specification. This interaction is captured on the approval of sourcing. When they approve the specifications that the signed Provider box is checked, the date is captured and their observations are also recorded. You can learn more about this feature in a white paper with the product documentation. His 'provider approval of specifications Whitepaper' you can find in the section of the white paper of http://www.oracle.com/technetwork/documentation/agile-085940.html#plmprocess

• Doubt workflow configuration.

  Hello
  
  Someone please explain this.
  
  E-mail account outgoing (SMTP)
  Inbound account (IMAP) EMail: smtp.nsam.dresser.com.
  
  E-mail account incoming (IMAP)
  Server name: mail.ad.ge.com
  E2K/r00379522
  
  
  Address Reply-To: [email protected]
  
  
  What is the Reply-To address?
  
  
  could someone explain please

  Please see these documents.

  Configuration of the envelope of Notification based on Java Oracle Workflow 2.6 with Oracle Applications 11i [ID 231286.1]
  Best practices of Oracle Workflow release 12 and Release 11i [ID 453137.1]

  Thank you
  Hussein

• Workflow and issue composition

  I have images of 22 cameras, GoPro, mp4, I imported natively into AE (11,02, OS 10.8.3 Mac 2.66 mhz Quad tour 16 g of RAM) in 1 composition.  I intend to achieve the desired effect and exit then a codec production, prores 422 for inclusion in my first project timeline.  Is this a valid workflow?

  Following the issue of membership:

  Most of the 22 cameras (in a table) recorded two or more files of the 16 mintes of execution, (there are 6 a separated in that time).  Before, I wrote these film files (after aligning a slate and for each layer continuous playback) to neaten up upwards and make more compact my calendar of EI.

  The effect I'm trying to achieve is a time-Slice/Bullet Time where I can "cut" one camera to the other throughout the Bay, thus freezing the action, but having the 'camera' move topic - and then the last layer/camera continue to play.  Specific I want to freeze, I set the opacity of each layer 0 successively to preview it help "freeze point" However in my ram only the first layer plays images.  Without the transformation of opacity to each layer, I can make a rough version of what I'm trying to do this solo ' ing each individual layer and I can't understand why making it each opacity of layer 0 successively does not work.

  Also once I have finished all the transformations of the opacity, the lower layer must be visible 1 framework after the layer above it goes to the opacity of the O, but actually, it's BLACK!  What the devil?

  Should I drag each image layer 1 forward in reading an image so only 1 of each layer?  Once again "turn on and turn off" each layer with an opacity?  I found the answer to this question, at least for now.  Each successive clip gets cut to the desired picture, then slipped a picture in front of the upper layer (save the top layer, which is reduced to the image).  In this way the same frame plays again and again with each camera along the Bay.

  I made a mistake using the comps pre mixed with the film 1 - taking?  In other words, my main computer now includes preliminary comps of the 2 files produced by most devices, as well as the original footage from these cameras mp4 that has recorded only a single file for the action.

  And further; Once I have the visible images in the correct sequence would be I before dial again and apply a sfx as displacement of the pixels to interpolate between the difference/door frames due to the difference of the position of each camera?  Please suggest another stream of work or layout composition!

  I hope I was clear, I am here and ready to clarify if I omitted no details.

  I would be forever grateful for the answers to questions pending if someone has an entry for me.  The question now is: remapping time or timewarp (which one?) front Displacement of the pixels - and displacement of the pixels is better for image interpolation smooth all this?

  http://i1218.Photobucket.com/albums/dd402/jessedavidharris/ScreenShot2013-03-30at31603PM.p ng
  Thank you very much
  Jesse

  Let me comment on one thing here:

  Also once I have finished all the transformations of the opacity, the lower layer must be visible 1 framework after the layer above it goes to the opacity of the O, but actually, it's BLACK!  What the devil?

  Here's the deal. The CTI is at the beginning of a frame. This means that if you look at the value for this image, you will see the actual values for this image. If you set 0 then it is the value of the image, you are on, not the next image. If you have a top to the frame 105 layer opacity 0 value and the layer directly beneath it also set to 0 then the two frames are 0. It's logical.

  I think that you go about it the wrong way. You do a lot of work for yourself that you don't need to do. If you have all your synchronized layers and in the left right order to the right and you want to make a gel frame 200 then set the CTI to frame 200, divide all layers, then move all the new layers to the top of the comp and select them. This can be done with three keystrokes. [Ctrl/Cmnd + A to select all the layers, Ctrl / Cmnd + D to split all selected layers, Ctrl/Cmnd +] to move all layers to the top.

  Now, use Ctrl/Cmnd + right arrow to move an image to the right and repeat the procedure. An easy way to mark these executives cut for easy selection would be to define a color label group. Select all the layers above the initial allocation (your layers of the image and the upper layers) and choose Animation > keyframe Assistant > sequence layers. Now the first layer above the layers of single frame, snap the CTI to that layer by pressing on the I have key, put a chronological marker, select all the layers above the layers of the unique image and press Shift + Alt/Option + the home line up on the first image and then catch them and hold down the SHIFT key to align ICT while dragging.

  That's all. It takes about 10 seconds. Now you can compost before this lot all over and put in place any interpolation or the time-remapping that you want in the precomp.

• The workflow configuration and troubleshoot

  Cheap DBA
  
  Please provide me with documents such as how to configure the workflow and how to hurt to pull the workflow.
  
  Best regards
  SG

  SG,

  Please refer to these documents.

  Note: 396314.1 - Oracle Workflow Documentation Fund, exit 12
  Note: 453137.1 - Oracle Workflow recommended output version 11i and 12
  Note: 231286.1 - configure the workflow based on Java Notification Mailer with Oracle Applications 11i
  Note: 249957.1 - example of configuration Workflow Notification Mailer with the Oracle Applications 11.5.x Java
  Note: 564394.1 - how to troubleshoot problems when the Workflow Services go down
  Note: 463354.1 - how to solve errors "Validation failed" when you start mailer
  Note: 753845.1 - how to perform a significant SMTP Telnet Test to solve the problems of Java Mailer

  Applications releases 11i and 12
  http://www.Oracle.com/technology/documentation/applications.html

  Kind regards
  Hussein

• Portably SA60-652 - configuration issues

  On startup, I get a small "Windows Installer" window trying to configure the Office 2000 program and ask to insert a Microsoft Office 2000 - Rom2 CD, which was not included with the computer.
  How can I solve my problem? Thank you
  David

  Hello

  Can you please tell me when you get this message? At the start of the CE (operating system or Office 2000 program)?

• WRT310N configuration issue

  I am trying to set up a network at home via my WRT310N router N Wireless, but have a somewhat convoluted Setup, go home. More specifically, I have a Verizon Actiontec modem/router combo, G who is serving more than one PC Wired has provided, as well as some wireless clients. I would like to connect the WRT310N the ActionTec router and have a Wireless N dedicated va that can also access the internet, but also a handful of wireline customers. Two routers are connected wan wan port port.

  However, I don't know how to set up the "Internet IP" of the WRT310N so that both routers to communicate between them. If I put a static IP address which is identical to the IP of the router, I get a warning indicating that the internet IP and router IPS are on the same subnet and is not kosher (which I guess makes sense). Define the Internet IP to DHCP function results in no IP being pulled from the Actiontec router (presumably for the same reasons)

  Is anyway to configure the router behaves more like an access point?

  Worked like a charm. Thank you!

• GANYMEDE + with 3560 cisco switch configuration issue

  Hi Forum,

  Here's my setup GANYMEDE + on my cisco 3560 switch and my question is, how can I configure the switch, if I would not type enable after I put the user name and password? with configs below, users will need to type activate whenever they connect to the switch in order to enter the user exec mode. Please let me know if there is something missing in my configs to help me avoid typing 'enable '.

  Thanks in advance,

  MacBookAir: ~ MacBook$ ssh [email protected]/ * /.

  Password:

  Switch > en

  Switch #show run | include the aaa

  AAA new-model

  AAA server Ganymede group + mpcc

  AAA authentication login default group Ganymede + local

  activate the default AAA authentication no

  AAA authorization exec default group Ganymede + authenticated if

  AAA authorization commands 1 default group Ganymede + authenticated if

  AAA authorization commands 15 default group Ganymede + authenticated if

  start-stop radius group AAA accounting dot1x default

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  AAA server RADIUS Dynamics-author

  AAA - the id of the joint session

  Switch #.

  Hello

  Add the level of privilege 15 control VTY line configuration.

   line vty 0 4 [..] privilege level 15 ! 

  Concerning

• Cisco 867VAE configuration issues - does no routing between LAN & WAN

  Im trying to configure a 867VAE to use our ADSL line. I can do to connect to the ISP, get an IP on their part and can ping 8.8.8.8 (Server DNS Googles) since the CLI routers but the side LAN does not work.

  Im just trying to assign static addresses to the side in the 192.168.1.0 LAN range, but it does not seem to carry the traffic from one side to the other. Can it be related to not being able to assign an IP address to all four ports Fast Ethernet (switch)? I get IP addresses cannot be set up on L2 links so Ive vlan1 configuration instead, but that cannot link to any real interface

  Attached is the current running config

  Can as a question you please recommend a good book to learn how to do this sort of thing?

  Thank you

  Hi ports 800 series which are l2 may not take an ip address like you because they are pure switch ports, so if you your using several VLANS part SVI Layer 3 must be set to the router and the switchports to shared resources, if only using the vlan 1 should not no need to trunk or make changes to these default ports , they are in the vlan 1

  You have a switch involved or are your PC connection directly to these ports, you set the gateway default ip address vlan 1?

  The interface vlan 1 shows to the top and to the top when you run int ip see the brief

  VLAN 1 is related to these ports, so when you connect to a pc with a correct address in this range him vlan will come and you should be able to ping from the local pc to the internet

  You don't have to bother with books that all things CCNA are on youtube and much easier to learn videos and books as you can see it being configured

  https://www.YouTube.com/playlist?list=PLF991927DF086C27C

• BlackBerry Smartphones Blackberry Bold 9900 email configuration issues

  When I access the configuration application and e-mail accounts and select I get instructions to "activate your business account and enter the details provided by your system administrator." Looking at the information on the internet it seems I should get another option: "Internet mail account", but that option appears. I recently bought this phone and I have never set up a company account. Now I can't access my email via my phone. Any ideas?

  Before you get too deep into what, please call your operator and confirm that you have the blackberry internet service added to your account.  Without this service, you will not be able to email personal to be installed on this phone.  Don't know what else to say on they mention, but you must have BIS added to your account in order to setup email.  Even when a wifi connection.

• BlackBerry smartphone T-Mobile Pearl 8220 Email configuration issues

  Hello

  When I tried to configure my personal e-mail with my BB Pearl 8220 (T-Mobile), there is no option for a personal e-mail account, only a business account. Can someone help get the personal account option to introduce or know something about it?

  Thank you

  -Dan

  Do you have a data Plan BlackBerry enabled on your account with your carrier or mobile provider?

  You have to, to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.

  Then call your carrier and you learn about to have added to your account BlackBerry data Plan.

  Good luck.

• MLPPP configuration issues

  I seem to have a problem getting a 3xT1 stuck solution to work. I can get 2 out of the 3 T1s to come and pass traffic, but I can't the third party to be added to the solution.

  Material: No. 2851

  IOS: c2800nm-advipservicesk9 - mz.124 - 15.T8.bin

  Modules:

  NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on the Slot, SubSlot 0 0 ', DESCR:"VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1.

  PID: VWIC2-2MFT-T1/E1, VID: V01,.

  (It is the map that is currently running 2 T1s glued very well).

  NAME: "WAN Interface Card - CDU/CSU T1 fractional (V2) on the Slot 0 SubSlot 1 ', DESCR:" WAN Interface Card - DSU/CSU fractional T1 (V2).

  PID: WIC-1DSU-T1-V2, VID: 1.0,.

  (This is the card MLPPP single T1 will come which should be stuck with the other 2 with a configuration MLPPP)

  NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on the Slot 0 SubSlot 2 ', DESCR:"VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1.

  PID: VWIC2-2MFT-T1/E1, VID: V01,.

  (This map is taken 2 running.)

  Configuration:

  controller T1 0/0/0

  framing ESF

  linecode b8zs

  slots of channel-group 0 1 - 24

  !

  controller T1 0/0/1

  framing ESF

  linecode b8zs

  slots of channel-group 0 1 - 24

  !

  controller T1 0/1/0 (this command does not work)

  framing ESF

  linecode b8zs

  slots of channel-group 0 1 - 24

  !

  Multilink1 interface

  MLPPP connection description

  IP x.x.x.x where x.x.x.x

  bandwidth 4608

  no ip redirection

  no ip unreachable

  no road neighbor counterpart

  No cdp enable

  multilink PPP Panel

  Panel multilink PPP Group 1

  out of service-policy xxxxxxxx

  !

  interface Serial0/0/0:0

  Description

  no ip address

  encapsulation ppp

  no fair queue

  multilink PPP Panel

  Panel multilink PPP Group 1

  !

  interface Serial0/0/1:0

  Description

  no ip address

  encapsulation ppp

  no fair queue

  multilink PPP Panel

  Panel multilink PPP Group 1

  !

  interface Serial0/1/0

  Description

  no ip address

  encapsulation ppp

  no fair queue

  multilink PPP Panel

  Panel multilink PPP Group 1

  !

  As stated above the value S0/0/0:0 and S0/0/1:0 T1s servile work as designed and show both layer 1 is up and align the Protocol.

  S0/1/0 shows that up but line protocol down.

  Any ideas? Can I not use a WIC-1DSU-T1-V2 in a MLPPP configuration?

  Looks like a carrier problem, check with the carrier the correct/linecode framing are in use and the third circuit is smooth. Config seems good.

  Even if the Interface is up and down and will not join Multilink, another useful command is to see the ppp multilink gives you a quick look at what interfaces are attached to the multilink, just for future troubleshooting.

  --
  CCNP, CCIP, CHRC, CCNA: Security / Wireless
  Blog: http://ccie-or-null.net/

• sqlcl error java... getting started configuration issue

  Hi all

  Enjoy everything that goes into making better equipped sql * more the type of tool.  I tried to get the sqlcl to work today for the first time, and it seems like I'm hitting an immediate road block that seems to relate to my situation of java from windows.  Here is the error in question:

  C:\oracle\sqlcl\bin > sql - optl

  Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/dbtools/raptor/scriptrunner/cmdline/Sqlcli in (UN

  supported major.minor version 51.0)

  at java.lang.ClassLoader.defineClass0 (Native Method)

  at java.lang.ClassLoader.defineClass (unknown Source)

  at java.security.SecureClassLoader.defineClass (unknown Source)

  at java.net.URLClassLoader.defineClass (unknown Source)

  in java.net.URLClassLoader.access$ 100 (unknown Source)

  java.net.URLClassLoader to $1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClassInternal (unknown Source)

  C:\oracle\sqlcl\bin >

  You have any suggestions on how to fix this so that I can move forward?  I have to play with sql.bat to identify the java_home?  If so, do you have an example?

  Thanks in advance for any help provided.

  Tom

  Update:

  Was certainly the java version showing a very old 1.4.  The configuration error was in my windows PATH variable env, which contained a very old version of java related to a former Oracle BI installation I've had.

  The fix was to remove all references to this former location of java in the path variable.  Once this has happened, I was able to shoot to the top of sqlcl immediately without problem.

  Thanks a lot for the suggestions of Jeff.  No doubt the eureka moment I needed to sort.

  Now to start your fun with this new tool!

  Thank you

  Tom

• LDAP configuration issues

  Hello world

  Using APEX 4.2, RDBMS 11 GR 2.

  I tried to configure for APEX to authenticate users in Active Directory after a certain number of messages in the forum but do not have the bees with success. Grateful if someone can help. Here's my server details (I replaced my server/domain with example.com):

  Domain: example.com

  The distinguished name (DN): CN = name, OU = HQ, OU = accounts, DC = example, DC = com

  sAMAccountName: case flast

  I used the above DN string to authenticate by using the simple_bind_s function in the DMBS_LDAP package and works very well in the workshop of APEX SQL and SQL Developer.

  I tried in the APEX by specifying in the field DN with the following, but it doesn't work:

  CN = % LDAP_USER %, OR = HQ, OU = accounts, DC = example, DC = com

  Also tried in the APEX of what follows as well but still does not work (as suggested by some posts):

  example % LDAP_USER %, OR = HQ, UO is user accounts, DC = example, DC = com

  Example\%LDAP_USER%,ou=HQ,ou=User accounts, DC = example, DC = com

  Example/%LDAP_USER%,ou=HQ,ou=User accounts, DC = example, DC = com

  CN = example % LDAP_USER %, OR = HQ, OU = accounts, DC = example, DC = com

  .. and many more variations

  Also tried this

  http://www.grassroots-Oracle.com/2013/09/using-LDAP-to-authenticate-your-apex.html

  and this

  http://ruepprich.WordPress.com/2012/11/02/LDAP-authentication-with-Apex/

  Can someone tell what I should try?

  Thanks in advance

  Thanks for your reply. I think my 'short' (in this example) is "example". I also tried, but it does not work.

  This a mistake? Or show us to debug information.

  I was just wondering if you need to register the schema of the apex and apex public user in the ACL?

  You must add the schema of the apex to ACL.