Workflow with several collaborators

Similar Questions

• region dynamic ADF + workflow with several jsff

  I have a simple page with two buttons welcome.jspx (button A and button B called taskflowA and taskflowB respectively) and a dynamic region
  This shows the appropriate taskflow.
  TaskflowA has two fragments: A1 and A2 and an exit action leading from A1 to A2.
  TaskflowB has also two fragments: B1 and B2 and an exit action leading from B1 to B2.
  Appropriate for the two actions that I created the control flow.
  When the page is loaded for the first time, it shows taskflowA A1 and I can navigate between A1 and A2.
  However, when I push the button B to the taskflowB, it shows the page B1 but I can't navigate to B2. Instead, it shows the Ataskflow (the default taskflow in the regionBean).
  
  Dynamic regions work correctly with taskflows who a jsff?
  
  Any ideas what I did wrong?
  
  Thanks in advance.

  Hello

  the usecase you describe is supposed to work. The bean managed you have linked to the region, it is in the scope of the request? If so, try and set it to for example pageFlowScope or sessionScope (for a trial) to see if it changes something. If it is then worn is your problem

  Frank

• Dynamic region with several task page fragment flow isn't refreshing VO

  JDeveloper version is 12.1.3 and Weblogic Server is 12.1.3.

  We have a dynamic region with several task page fragment flow.  We have created a menu that will open on the workflow task in the dynamic region. Before defining the workflow id in the bean, we execute query on the original Version after setting the bind variable. When we click on the menu is open the flow of relevant tasks in the region and showing the Original data table.

  But when we open the same request again to a different browser session, it shows all the data in the original Version when the user clicks on the relevant menu item...

  I have attached the code used to navigate to the different workflow tasks written in the bean from the back of the home page.

  We have no idea why anyone what happens, if it's a server problem or a code issue. Because unless and until we open the target application in a new browser it works fine.

  We tried and deployed on a remote server as well, but it gives the same question...

  Would be really grateful for the help...

  The user, the code you posted has some serious problems. Never, I repeat never store a reference to an application module in a static variable in a bean. That is why you see only data once. After that, the second session reuses the application module from the first to the configuration data, but to display data it uses a module different application.

  The way you try to configuration data is too bad. You must pass the parameters to the workflow and init data in the default action of the workflow instead of doing before installing the new workflow id. A workflow is a unit of work that is kind of a black box. You may not assume that the stuff you do outside of this black box can be seen inside the box. This is only true if the workflow share the same control of data as it's parent (share of data control).

  I suggest you read some documents on the workflow and how they work. A good start is to look at this video https://www.youtube.com/watch?v=A3CmDhWHaG0

  or work through this tutorial 12 c (12.1.3) Oracle JDeveloper tutorials - working with bounded task flows, regions and routers

  Timo

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• Problem of size of form with several Digital Signatures

  I created a form (liveCycle 8) with several digital signatures.  When each user signs the form, this section of the form is locked using collections.  The form is workflow by email after each user connects it.  Whenever the user signs and submits the form, the size of the form becomes too great.

  How to optimize the form to compress whenever a user signs the form?

  Thank you

  Lori

  Steve,

  After your request to publish the form, I wanted to remove some elements of society, such as the Logo.  Once I removed the Logo, I found that the biggest problem was a Logo image size which was the large file.  Once I reduced the size of the image, added only 46 KB signatures at each level of signature.

  Thank you for your help,

  Lori

• Workflow with the wizard

  I have a question about workflow, with a wizard to help me select the images to be used for a show.  Here's my current workflow.

  (1) mounting base and adjustment of images.  Reform of the obvious losers.

  (2) export images so that my assistant can rate/slaughter them.

  (3) import on sides of my assistant and use it to help determine what are the images to use.

  (4) show to create images.

  I am strugling with the best way to manage 2-3.  My assistant does not use the same computer that I do so using the same LR catalog and note using the LR library module does not work.  I would like to be able to publish in a shared directory, my assistant a tool allows to note the images here and then import it those transparent rear side in LR.  I think the API to publish has a facility to import * of * data - it can download the comments of photo sharing sites.  Can he do this?  This feature is already implemented?  Y at - it a plugin that does this?

  Does anyone have an idea of how improve this workflow?

  Thank you!

  David

  I have a LR catalog and 1000's of photos, but I have two computers that I want to work with them, so my workflow is to host the catalog and photos on a USB key drive permanently, I save on my drive internal, so I always have a copy backup of all that in the case where I drop the USB.  There is no export and import several times, just open the catalog on two different computers.  I have the USB key mapped as the same drive letter on both computers, so I don't have to mess with the remapping of the records.

  USB 3.0 portable drives are fast enough.  If it is a Mac environment I believe that there is a FireWire interface reasonably fast, too.

  ==

  However, if you want to work with pictures on the local disk, what is the problem with giving the wizard a copy of all of the LR catalog (which is relatively low compared to the size of the photos, in any case) and the range of photos via a share on their computer, allowing them to rate the photos, then simply copying the catalog back share?  Make sure the path to the pictures (and to avoid confusion, the catalog) are the same on both computers and it should work ok.  The two computers could access photos via a local drive letter, not a network share.  Just copy is made through the share.  You probably do not want to overwrite your catalog with their copy immediately in case they changed something inadvertently, but eventually you can serve additional copies on your side as serve you the backups that accumulate over time.

  If there's no privacy with what you have in your large catalog, they would not have previews or photos so would not be able to see things, just read the key words.  If it is not quite private, just segment your catalog in addition to one and put the photos that the wizard is allowed to see in a catalog that do you the above process with and let your photos more private in another catalog.

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Background with several pictures

  How can I create a wallpaper for my iPad, iPhone, MacBook Air with multiple photos?

  (El Capitan, iOS 9.2.1 Photos)

  To create a collage of photos, you can create a photo book project and select a template page with several photos. Fill it with photos of your choice and print the page in PDF format.

  The themes of the book are different according to the terms of the photos and the number of photos per page.

  It's the theme travel plans:

  

  If you have installed iWork apps try Keynote to create a slide with many photos, arranged freely.

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• Interfacing with several unknown USB devices; all producing NMEA strings

  Hi all

  Question about the peripheral USB interface and their associated drivers.

  I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

  Is it possible to produce one driver who will accept any USB device strings?

  Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

  I had a trawl of the forums, but I've not found anything that specific.

  Thanks, I really appreciate the help.

  About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

  I am not expecting an all-in-one solution but asked the question in case it was possible.

  What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

  LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

  I appreciate any help and I think I got the answer I was looking for! Thank you very much

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• Slide with several digital poster Down filter event Bug button?

  A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

  A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

  A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

  It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

  A vi and a printscreen are attached.

  The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

  Or someone has a better solution and explanation?