region dynamic ADF + workflow with several jsff

Similar Questions

• Workflow with several collaborators

  Workflow have version control using increment of the version that you are making changes.  Is there something analogous to the branches of the function in the VCO world?  The possibility to merge the changes in?

  If we have several people working on a workflow, im, trying to figure out the best way to present the new changes without replace directly the workflow with the new print (which could break him other tasks dependent on the id)

  I worked on vCO for 8 years, including very large projects and there was very little chance that I had to merge the workflow. Most of the time that could have been avoided by each server in developer of vCO synchronization to a repository Server central vCO.

  And when I needed to do this, the Magnifier tool included in the synchronization of workflow was good enough for me to manage change. Maybe it will work for you as well (right click / Synchronize).

• Dynamic region with several task page fragment flow isn't refreshing VO

  JDeveloper version is 12.1.3 and Weblogic Server is 12.1.3.

  We have a dynamic region with several task page fragment flow.  We have created a menu that will open on the workflow task in the dynamic region. Before defining the workflow id in the bean, we execute query on the original Version after setting the bind variable. When we click on the menu is open the flow of relevant tasks in the region and showing the Original data table.

  But when we open the same request again to a different browser session, it shows all the data in the original Version when the user clicks on the relevant menu item...

  I have attached the code used to navigate to the different workflow tasks written in the bean from the back of the home page.

  We have no idea why anyone what happens, if it's a server problem or a code issue. Because unless and until we open the target application in a new browser it works fine.

  We tried and deployed on a remote server as well, but it gives the same question...

  Would be really grateful for the help...

  The user, the code you posted has some serious problems. Never, I repeat never store a reference to an application module in a static variable in a bean. That is why you see only data once. After that, the second session reuses the application module from the first to the configuration data, but to display data it uses a module different application.

  The way you try to configuration data is too bad. You must pass the parameters to the workflow and init data in the default action of the workflow instead of doing before installing the new workflow id. A workflow is a unit of work that is kind of a black box. You may not assume that the stuff you do outside of this black box can be seen inside the box. This is only true if the workflow share the same control of data as it's parent (share of data control).

  I suggest you read some documents on the workflow and how they work. A good start is to look at this video https://www.youtube.com/watch?v=A3CmDhWHaG0

  or work through this tutorial 12 c (12.1.3) Oracle JDeveloper tutorials - working with bounded task flows, regions and routers

  Timo

• Dynamic with several Conditions when action

  APEX 4.2 on XE

  Hi all, I'm trying to create a dynamic Action based on several when conditions... The docs seem to indicate you can do, but I can't seem to trigger.

  Basically I have a DA

  Event: change

  Selection type: item (s)

  Article (s): P42_NEW_REC, P42_STATUS_ID

  Condition: equality

  Value N, 43

  Individually, these trigger very well, but does not fire? Is it possible to have several times conditions? If so, what is the problem with the above.

  Alternatively, if not, if someone could give better advice to achieve the same thing, Id be grateful...

  Rgds

  Richard

  Hello

  Use the condition list

  Kind regards

  Jari

• Passing the parameter of workflow with shows the http 404 error pages

  Hello

  I have a parent workflow with fragments of page deleted as a region on a page. The fragment of a page in the parent workflow displays the read-only table employees. The service Id of the table appears as a link. When you click this link, the following is provided:

  • action listener is called which calls the managed bean that retrieves this Department Id and defines in the pageFlowScope.
  • Pass this value as an input to the child workflow parameter. Child workflow contains its display type is inline-popup page.

  The problem is that when there is no parameter passed to the child workflow the popup is fine. But if the parameter is passed it gives the following error:

  ADF_FACES - 60105:HTTP error state Code: 401.

  Parameters passed from parent to child, such as:

  #{pageFlowScope.DepartmentIdBean.value}

  (DepartmentIdBean is the bean class that gets and sets the Id selected Department)

  Parameter received in the child as workflows:

  #{pageFlowScope.pdeptId}

  Can someone please help me solve this problem? Is that the path parameter is spent creating problem? The same scenario works very well if the child workflow is invoked with fragments of page and like exterior window. I use JDev 12 c.

  I looked at the code and modify it to make it work. There were a few errors. the way main reason you got the error was that you tried to read the non-existing parameter values.

  Download the app from work OTNempDeptTaskFlow.zip | JDev & amp; Goodies ADF

  After downloading the doc you rename to zip and can then decompress.

  Timo

• How to pre-fill the ADF form with the data?

  Hi guys,.
  
  I was wondering how you go about the generation of a pre-filled form of ADF. Is this something that is done if the designer of the ADF and the business objects? or do you create database tables stay and bind in the ADF and the workflow. Specifically, I want that if a user is presented with a several drop-down lists when the human task of the initiator is executed.
  
  Thank you
  Ross

  Hi Ross
  1. Yes, in all first place in the database, we added all the data manually for all research. Its our own schema custom. We plan to provide a few simple administration screens in a different WebApps to maintain these values to search. Note that it is a different simple ADF application, with a layer of EJB and EJB layer calling this and get/update database values.

  2. in ADDITION, we have a few search values we get from system/application totally another as Oracle EBS Suite. To do this, we have created custom schema. In this custom scheme, we have a few stored procedures created by the developers of EBS database (they are more familiar with EBS). Now in our EJB layer, we use architecture JPA, call these stored procedures and get all values for the search and display in the TaskDetails page. These values are maintained in EBS itself, so we have not all custom within our SOA/BPM project admin screens.

  In conclusion, our SOA/BPM applications, we have 2 databases. First database is for components SOA where we run RCU comand and there all SOA_INFRA, MDS, diagrams ORABAM etc. The second database is for our custom schema specific to our application. Here, we have our own lookup tables, custom table and all cutom stored procedures than coonect to external EBS etc. Weblogic console, we have just to create a data source for this second database and use layer JPA (persistence.xml file). For the first database, you already know that in the creation of the field itself, it will create all sources of data also.

  Thank you
  Ravi Jegga

• Moving regions dynamically in Oracle APEX5

  Hello

  I need to move regions dynamically in my screen 5 APEX.

  For example: I have 3 regions in my screen. Now, I need to drag and change the position of the regions dynamically. Is this possible?

  IAM using Oracle Apex Version 5.0.2.00.07, universal Theme.

  Thanks in advance.

  Kind regards

  Nivetha

  Hi, Elise

  Yes it is possible with this plugin

  http://Apex-plugin.com/Oracle-Apex-plugins/dynamic-action-plugin/flexible-regions_200.html

  It lets your region be draggable, resizable. His new position is automatically recorded.

  Try to drag the region and refresh the region in its demo

  https://Apex.Oracle.com/pls/Apex/f?p=30904:1:10379579439468:

  I hope this meets your need

  Concerning

  Mahmoud

• ADF security with identification details & role of database table

  Dear experts,

  I have developed web applications by ADF with JDeveloper 12.1.3.0.0

  I want to apply the ADF security for authentication and authorization process.

  I mentioned several blogs that associated with example ADF security with the database table, but unfortunately I couldn't reach my task of them because all the blogs that make reference to the roles of username, passwords, and user to hardcode.

  In my web application, there are 3 database table (users, roles, User_Role).

  A user can have one or more roles.

  I was able to accomplish this task using spring-mvc + Hibernate + sprig security. Its code of even below.

  <>Authentication Manager

  <>authentication provider

  < jdbc-user-service data-source-ref = "dataSource".

  users by name of user-query =

  "username, password, enabled users to select where username =?"

  authorities-by-name of user-query =

  "" Select username, role of user_roles where username =? ". / >

  < / authentication provider >

  < / authentication manager >

  Pls guide me to solve this problem.

  Thank you

  Mauricette

  User, your question is not clear. You have implemented the safety with the spring? So, what's your question?

  The ADF security can be combined with a sql authentificator that reads users and roles of the DB tables. See Java / Oracle SOA blog: the use of tables of database as in WebLogic authentication provider and anything on the Fusion Middleware: Tables of database user to implement authentication in ADF and http://soadev.blogspot.de/2010/04/sqlauthenticator-simply-best.html.

  All of these solutions do not use users coded hard and rolls.

  Timo

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• ADF taskflow with not get every page refresh

  Experts,

  We have created a portal WebCenter ADF application.  The ADF taskflow with 3 pages on this subject.

  1. first page includes a data control that uses a session bean method that calls an external Web service.

  2. second page has a feature to view the details of a record that is selected on the first page.

  3. third page has a function to download a file.

  
  

  The user navigates and downloads a file, we redirecting them to the first page where the control data must display the list of issues.  The problem is that after adding a new record, and his return to the control of data page (which is a list of records), the newly added drive does not appear.  The only way to view seems at this point to ask the user to shut down and log in to the system and reactivate the workflow.

  
  

  We have a phase listener to clean the cache, in the hope that it could solve the problem.  But it does not.

  
  

  Any ideas or advice on how to automatically refresh the data in control when the user navigates to this page?

  
  

  Thanks in advance.

  Sam.
  

  In the links page, verify all conditions of discount on the data control.

  Read also the understanding of the lifecycle Page Fusion (in particular article 19.2.1) and using ADF data binding in an Application of Web Java EE model (especially the Section 2.3.4)

• The ADF workflow initializer is called before after the settings?

  My workflow has several parameters, some of which are optional.
  It is not clear in what order are called methods set for parameters, nor is it appears from the documentation that the initializer for a workflow is called before or after the set methods for parameters of the workflow are called.
  I want to call a method, once all parameters have been set. I can do this with the initializer?

  They must be defined at the same time that the initializer is called. Oracle guarantees not the order in which they are defined and customer should not count on that. If you are interested in looking under the hood some more watch this blog post:'t-fit-all.blogspot.com.au/2010/10/jdev-programmatically-capturing-task.html http://one-size-doesn

  If your end goal is to call a method once the parameters are defined, simply include a call to the method as a default activity in your workflow. It is usually my preference when I don't want to make the programmer next abreast of all treatments applicable to the main object of the workflow. The previous link is the exception, as it was written for purposes of logging, and my preference is not to clutter the workflow with logging code.

  CM.

• Problem of size of form with several Digital Signatures

  I created a form (liveCycle 8) with several digital signatures.  When each user signs the form, this section of the form is locked using collections.  The form is workflow by email after each user connects it.  Whenever the user signs and submits the form, the size of the form becomes too great.

  How to optimize the form to compress whenever a user signs the form?

  Thank you

  Lori

  Steve,

  After your request to publish the form, I wanted to remove some elements of society, such as the Logo.  Once I removed the Logo, I found that the biggest problem was a Logo image size which was the large file.  Once I reduced the size of the image, added only 46 KB signatures at each level of signature.

  Thank you for your help,

  Lori

• Workflow with the wizard

  I have a question about workflow, with a wizard to help me select the images to be used for a show.  Here's my current workflow.

  (1) mounting base and adjustment of images.  Reform of the obvious losers.

  (2) export images so that my assistant can rate/slaughter them.

  (3) import on sides of my assistant and use it to help determine what are the images to use.

  (4) show to create images.

  I am strugling with the best way to manage 2-3.  My assistant does not use the same computer that I do so using the same LR catalog and note using the LR library module does not work.  I would like to be able to publish in a shared directory, my assistant a tool allows to note the images here and then import it those transparent rear side in LR.  I think the API to publish has a facility to import * of * data - it can download the comments of photo sharing sites.  Can he do this?  This feature is already implemented?  Y at - it a plugin that does this?

  Does anyone have an idea of how improve this workflow?

  Thank you!

  David

  I have a LR catalog and 1000's of photos, but I have two computers that I want to work with them, so my workflow is to host the catalog and photos on a USB key drive permanently, I save on my drive internal, so I always have a copy backup of all that in the case where I drop the USB.  There is no export and import several times, just open the catalog on two different computers.  I have the USB key mapped as the same drive letter on both computers, so I don't have to mess with the remapping of the records.

  USB 3.0 portable drives are fast enough.  If it is a Mac environment I believe that there is a FireWire interface reasonably fast, too.

  ==

  However, if you want to work with pictures on the local disk, what is the problem with giving the wizard a copy of all of the LR catalog (which is relatively low compared to the size of the photos, in any case) and the range of photos via a share on their computer, allowing them to rate the photos, then simply copying the catalog back share?  Make sure the path to the pictures (and to avoid confusion, the catalog) are the same on both computers and it should work ok.  The two computers could access photos via a local drive letter, not a network share.  Just copy is made through the share.  You probably do not want to overwrite your catalog with their copy immediately in case they changed something inadvertently, but eventually you can serve additional copies on your side as serve you the backups that accumulate over time.

  If there's no privacy with what you have in your large catalog, they would not have previews or photos so would not be able to see things, just read the key words.  If it is not quite private, just segment your catalog in addition to one and put the photos that the wizard is allowed to see in a catalog that do you the above process with and let your photos more private in another catalog.

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.