Working on the Satellite 5100-201 remote control?

Similar Questions

• A few multimedia buttons don't work on the Satellite A100-201

  I noticed recently that my play/pause, next track and previous multimedia the track buttons do not work, but made the stop button. I read somewhere that the relocation of the common modules could solve the problem, but on the support page for my model of laptop I don't have a download for the common Module.

  Any ideas what's happening?

  Thank you

  What application is running when you try to use these media buttons?

• Lack of BIOS on the Satellite 5100 201

  HY there. I have a laptop Toshiba S5100-201 with MODEL NO.:PS510E - 01CZ5-G3.

  The bios is missed, but try to boot from a hard disk. I don't have bios fing in the toshiba homepage. If please send me by e-mail, or paste herer a link.

  Thenks very much.

  Hello

  AFAIK BIOS cannot be simply downloaded to update the BIOS. In my opinion you need professional help and you should contact the closest partner in your country.

• Satellite 5100-201: five keys: ' 9-O - L-.-Del "do not work

  Hello!
  I am owner of a Toshiba Satellite 5100 201. The five keys 9-O - L-.-led on the keyboard do not work. Is it a software or a defect of the keyboard control problem or a problem of contact on the map? Does anyone have experience with this problem? Can it be a BIOS problem? I have Bios 1.90.
  Can someone help me?

  Best regards
  Ulrich

  Hello

  in most cases, the problem is that there is some dirt on the contacts of the keys.
  You must remove and clean and check the connector of the keyboard.
  If this help not the keyboard probably is defective and must be replaced.

  Good bye

• Differences between Satellite 5100-201 & 5100 603

  Hello

  The user guide is not clarify the differences between the models S5100-201 and S5100-603.
  I can work on them are different speeds, memory and hard drive, but what about the internal bits?

  I have a model 603 broke with a power control fault. Does anyone know if a model-201 motherboard will enter unity of 603?

  Thank you
  Pete

  Hello

  I am not a technician, but I found the info that these units have a different graphics card and the two can't handle with RAM max.

  Satellite 5100-201:
  -nVidia GeForce4 440Go 32 MB
  -can handle with max 512 MB RAM

  Satellite 5100 603:
  -nVidia GeForce4 440Go 64 MB
  -can handle with max 1024 MB of RAM

  I'm not 100% sure, but if you swap the Mo together with all hardware, I think that other devices should work, but I put t know how it will work with the BIOS. Maybe the DMI should be rewritten.

  There are little guys having very good knowledge on this forum, and I hope that some of them will be post here and say more about it.

• Satellite 5100-201-size Limitation of HARD drive

  Hello

  I have a Satellite 5100-201 P4 - M 1.6 Ghz with 30 GB IDE HDD and 1024 MB of RAM. I use my 'old' Satellite only for music (the largest sound found on laptops!) but my HARD drive got a little weak.

  So my question is if there is no limit on the size of HARD drive for this laptop. I would buy an IDE 120 GB or 160 GB HDD at 5400 RPM and 8 MB Cache. If this is not possible, I can also take the 80 GB of HDD (another puts it on say works), but liked better!

  Thanks for your help!

  Greetings,
  Fab

  Hey Buddy,

  I think that the maximum capacity of the HARD drive would be 120 GB because the laptop has a limitation of LBA 28 bits. This means that only the hard disks up to 128 GB usable 120 GB would be the maximum. 5400 RPM and 8 MB cache are ok.

  By the way: it of Nice to read that you are always so pleased with old Satellite 5200 :)

• Satellite 5100-201 a LG GSA 5120D external (Firewire) - DVD burner

  Material:
  Satellite 5100-201
  LG GSA5120D-connected via Firewire external DVD burner

  Software
  Windows XP SP2

  Problem:
  Windows is instability, often blue screen:
  IRQ_NOT_LESS_OR_Equal or other

  by stop Windows always shut down (Halt)

  Help me.

  Hi Victor,

  on the utility Cd & Toshiba tools is a program called «Register of IRQ routing V1.0»

  Maybe a reinstall might fix the problem!

  To bye chris

• Speakers have stopped working on the Satellite a series

  I have a laptop satellite - not sure what mono - speakers have stopped working and are unable to turn back.

  Have tried checking volumen and none controls mute buttons are slected. tested and it says ther no problem but still no sound. have uninstalled the driver and reinstalled - what else can I try?

  > have a portable satellite - not sure that we
  Roll on Notepad and check the label at the bottom of the unit. You will find the name of the laptop!

  > Speakers have stopped working on the Satellite a series
  Open the Device Manager and check if no yellow exclamation point appears. If you can see this yellow sigh perhaps the sound card driver is not installed correctly.

  In addition, please plug the headphones to your laptop and check if you can hear anything through the headphones.

• Windows Media Center learned remote control cable, cannot recognize the Windows Media Center remote control

  Running Vista Home Premium 64-bit.  I rent a cable box so I can get some programs at the 3-digit level.  When I've set up my Windows Media Center (WMC), WMC learn successfully the cable box remote 1 - channel upward.  My problem is the next step and change the channel using the Windows Media Center remote control or keyboard.  My keyboard or the WMC remote will change the channel.

  I got Windows Media Center to re - learn the cable box remote control twice, which is always successful, but again once, when the time comes to use the Windows Media Center remote control or my keyboard to change the channel, the channel does not change.

  Could someone please help me with this?  Thank you in advance.

  Hey kansascitykid,

  If you receive your TV signal through a set-top box and Media Center is unable to change the channel, or it changes channels incorrectly, check the following:

  ·        The infrared diffuser is connected to your remote control receiver. If the infrared diffuser is not connected, Media Center cannot send a signal to the set-top box to change a channel.

  ·        The infrared diffuser is well positioned at the front of the set - top box. If you are having trouble placing the IR blaster on the set - top box correctly, try to use a flashlight to locate the signal on the set - top box receiver.

  ·        IR control codes are configured correctly. If constantly changing channels, control IR codes may not have been configured correctly during the installation of TV signal. To reconfigure your TV signal, on the Windows Media Center start screen, highlight toTasks, clickSettings, click on TV, then clickSet up the TV Signal.

  • Center cannot send a signal to the set-top box to change a channel.

  More information here: problems with watching TV on your computer

   

  Also have a look if you find useful suggestions in this thread.

   

  Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite 5100/201: problem with the video card or overheating?

  HY,

  I have problems with video on a 5100/201 Satellite. It seems that when I press the left side above the graphics card or press a key on the keyboard on this side, the screen begins to be scrambled and vertical lines appear. To end Windows XP resets giving a critical error on the device and the video goes to 640 x 480. Same thing happens when you run Linux Suse 9.0.

  My question is what is the cause: map graphic damaged or overheating due to the fan not as effective as originally (my laptop is nearly two years old. Do you have someone be able to find the cause and solved the problem, also with the assistance of Toshiba?
  Any help welcome.

  Hello

  I think the problem on your laptop depends on the fan.

  A colleague on mine has a 5100-603 and had similar problems.

  The Station changed the fan.

  Good bye

• Control buttons do not work on the Satellite a series

  For some reason any my av controls stopped working and I tried to reinstall my control however that does nothing!
  I ' ts so frustrating!
  My drive internet and media who work just stop the play/pause and buttons next/previous donation work and I can't understand why! Help, please!

  Hello

  Because you are new to this forum, I will be patient with you but please don t forget to display your name cell phone text time.

  To get the job of control buttons you must first reinstall the common module of sand, then controls Toshiba Toshiba page!

  Good luck

• Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

  Hello

  My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

  Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

  If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

  Thanks for any help or ideas
  Steve

  After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
  But I can't give you a reason why it causes an error.

  I found this similar thread in the forum
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

• Satellite 5100-201: overheating after several times

  I have a 5100-201 Satellite.
  Recently, a screen problem surfaced: first described images are blurred, then scratches appear, usually the screen collapses provisional modus. I noticed that the laptop gets really hot, and I thought it must be a problem of overheating.

  I cleaned empty the notebook, I even opened and checked that the fan rotates properly. Subsequently, the laptop worked once, the fan run constantly and the laptop does not get heated.

  The next day, the redone problem surface again and this time I had still a black screen. Now, the laptop starts normally when I turn it on, but I know that after a while it will heat again.

  Ah, I also updated the driver for the graphics card, but it did not help. Does anyone have a suggestion?

  Thank you

  To protect against overheating of the CPU has to a n internal temperature sensor. If the temperature of computer s reaches a certain level, the cooling fan is turned on or processing speed is lowered. Use the cooling method of the base configuration item in the Toshiba power saver.

  In addition, it is very important that you use Notepad in the right position. The area near the gates of cooling module must be free because the fan needs to catch his breath.
  It is important for the circulation of fresh air.

• I never received an order for the Satellite A100-207 remote

  Satellite A100-207 is supposed to have the remote or do I have to buy it separately?

  If anyone knows it please.

  I think that this model of laptop should be delivered without the remote control.
  In my opinion, the remote control is an optional part as a modular cable and it depends on the laptop model.

  If the remote control has not been delivered so I guess that laptop doesn t support this device

• Replacement of motherboard on the Satellite 5100-603 - BIOS update is required?

  Hello
  I just replaced a dead card main satellite 5100 603 with a new main Board which I could get on ebay (Toshiba card system FNZSY2 - A5A000160010 P000341750-Ref.). If I boot with an installation of XP DVD it starts but hangs with the message "unexpected error (536674392) on line 1768 in D:\xpspi\base\boot\set-up\arcdisp.c".

  I realized that there are versions of different bios for various models 5100 satellite. I think I flashed the bios of 5100-603 last for this problem.
  Is this correct? (start with BART-PE from CD or HDD BART-PE raises the same error msg text in another look)

  Hello

  to get your motherboard to work you must write about the UUID (Universal Unique Identifier).
  As far as I know, you can get the UUID to a Toshiba service partner writing tool.

  Good bye