HIDData.exe has stopped working in Windows Vista SP2

Similar Questions

• At the opening of the various programs I get the error message 'extended attributes are incompatible' and "Consent UI has stopped working" in windows vista.

  Original title: extended attributes

  I started getting the following errors with various programs "extended attributes are incompatible" and "Consent UI has stopped working". I tried to do a system restore but get error inconsistent attributes for 'rstrui.exe '. I also had the message to ShellExecuteEX.exe when you try to install an application and even trying to download the Windows 7 Upgrade advisor. Just to check, I tried to run msconfig from the start and even gives me the message attributes. I am running Vista Home Premium with Service Pack 2 installed. Advice please. Thank you, Roger P

  Hi Roger P.

  ·         When the issue started?

  ·         Remember to make any hardware or software comes to the computer before this problem?

  ·         What antivirus application is installed on your computer?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I suggest you to follow these steps and check if that helps.

  Methoad 2: try to run the windows recovery option system restore.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It could be useful!

• SE error windows host process (Rundll32) has stopped working on Windows Vista

  Original title: (Rundll32)

  Need help fixing this problem microsoft windows popup message, process host windows (Rundll32) has stopped working.

  Hello

   
  1. When you get this error message?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
  
  Step 1: safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
   http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts
  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
  
  Hope this information helps.

• Windows live mail has stopped working on Windows Vista

  I try and open my windows live mail for my mail but it is said that it has stopped working and needs to close. What can I do to solve this problem.

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• EHP.exe has stopped working under windows. custody arise and asks him to close the program.

  Microsoft Windows

  EHP.exe stopped working.a problem caused the blocking of the programme of work correctly.windows closes the program.

  How to solve this.

  Thank you

  It seems to me be Malware or a left during the start-up stilll input there.

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If after scanning, you still have problems with it, use the program below to remove the boot:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Whenever I restart my computer, I get the following message: PrinterSelect.exe has stopped working. Windows can check online for a solution to the problem.

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: printerselect.exe
  Signature of the problem 02: 1.0.2453.22313
  Signature of the problem 03: 450fe152
  Signature of the problem 04: mscorlib
  Signature of the problem 05: 2.0.0.0
  Signature of the 06 problem: 4a7cd8f7
  Signature of the problem 07: e4
  Signature of the 08:10 problem
  Signature of the problem 09: System.Security.Security
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  To install a new all-in-one, I'm afraid that I will continue to have problems and the same error message.  Any help would be appreciated.

  Hi dtwes,

  try to stop the program from running at startup:

  Tutorial: http://www.vista4beginners.com/System-Configuration-Utility
  deselect 'printerselect.exe '.

  I hope this helps.

• Service using SRVANY. EXE has stopped working on Windows Server 2008 R2

  I have a Windows Server 2008 R2 (64-bit) server that runs as a service for several years a virtual machine VMware Player.  I used the SRVANY old Resource Kit tool. EXE to configure the Windows 8.1 virtual machine to load and run in the background.  This config worked without problem for years and through at least an upgrade of the virtual machine operating system.

  02/06/16, I upgraded VMware Player to version 12 and later upgraded the virtual machine OS Windows 8.1 to Windows 10.  After that, the service that I created using INSTSRV and SRVANY is more years launches the VM.  The service seems to start with success (no errors), but the virtual machine does not start.  I don't see a new instance of the vmplayer.exe process when I start or restart the service.

  Other changes on the Windows Server 2008 R2 server since the last SRVANY config worked were last month security patches.  I have a hard time to believe that upgrading the guest OS could have no relevance here.

  To troubleshoot, I tried vmplayer.exe followed of the file name of the VMX virtual machine from a launch command line.  This works.  However, if I try to run the same exact command from a CMD, launches of VMware Player interface file, but I get a "file not found" dialog box, and the virtual machine does not start.

  I also tried reinstalling VMware Player 12 and temporarily return to VMware Player 6.  None worked.

  Ideas?

  Subscribed to the thread and ping relevant resources.  Good luck

• "messagecheck.exe has stopped working" message any time when I started my windows 7

  Following is the display window:

  ----------------------------------------------------------------------------------------------------------
  MessageCheck.exe has stopped working
  Windows can check online for a solution to the problem.
  --> Online and are looking for a solution and close the program
  -->, Close the program
  ----------------------------------------------------------------------------------------------------------
  I did the two one after another, still no help to stop it. He is always arise every time when I start Windows 7 and continues to POP up at any time when I use Windows 7. Looking for a solution to stop it.

  Hi abdou,.

  Is your machine a HP?

  If so, please take a look at the link below with a possible solution:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software/MessageCheck-exe-after-uninstalling-HP-PhotoCreations/TD-p/1496147

  I hope this helps!

• Error: "Setup.exe has stopped working".

  Trying to open a downloaded file that updates a driver Lexmark (Z600), the process ends quickly with the dialog box stating that "Setup.exe has stopped working. Windows Explorer needs to close".

  You can try a right-click on the setup.exe > run as admin.

  Or repost in the following Forum:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question Driver Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• p3dpythonw.exe has stopped working

  Thank you for your time. While you connecting to his game (pirates of the Caribbean), my daughter can choose a character to play, but when she chooses 'play' 53% of loading game she gets a message 'p3dpythonw.exe' has stopped working. Windows will search for a solution, etc. then game returns to the main menu for the game. This does not happen on other PCs of in the House, so I guess it's a problem with her laptop and not game. She is using windows 7 on an HP laptop. I tried to go to a restore point but there is no for before this problem started. again, thank you for your time.

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://piratesforums.com/threads/

  It will be useful.

• Windows Vista. Setup.exe has stopped working and I can't get the program to load.

  I have a Gateway laptop with Windows Vista.  I put Norton anti-virus on it last year.  Now I am trying to run the new disk of Norton and the computer tells me that setup.exe has stopped working and I can't run the program. Norton 2008 has been removed.

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download/run their abovelink Norton Uninstall tool to ensure that all "Norton" is deleted.

  Then, right-click on the setup.exe Norton > run as admin.

  If the above does not help:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  Contact the Norton Support for problems with their software.

  See you soon. Mick Murphy - Microsoft partner

• Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

  Hello

  I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

  After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

  I tried to uninstall the manually, but I got the same message.

  These programs are;
  Setup driver Atheros
  Toshiba hardware configuration
  Toshiba supervisor password
  Realtek High Definition Audio Driver

  So I can't go ahead with the upgrade.

  Anyone know what could be the problem?

  Thanks in advance,

  Pouvez - TR
  .

  Hello

  Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

  Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

  If you did a recovery facility before the upgrade?

  Welcome them

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• Convert.exe has stopped working Vista

  I'm running a program that converts any type of movie file extension, when it works normally... but at the moment it happens with convert.exe has stopped working... and it does the same thing with Divx Converter

  Tests-

  Go to the DivX icon or shortcut
  Right click and select Properties
  Select the Compatibility tab
  Check run in compatibility mode and select Windows Vista Service Pack 2 (even if you are on Win 7) check her disable visual themes
  Run as administrator

  Back up the registry before you do the following:

  http://maketecheasier.com/backup-registry-in-Windows-7/2009/12/15

  Start > type Regedit

  Make sure this key:

  HKEY_CURRENT_USER\Software\DivX\Settings\StreamEngine\DfxAutoEnable

  Make sure its value is 1

  Reboot and close registry

  Need more help, try DivX support: http://www.divx.com/en/support

• In Vista, error "FINDFAST. EXE has stopped working and needs to close. "

  I get continually comes a msg as FINDFAST. EXE has stopped working and needs to close. What is this reference to? Liu

  Hi LaurieHead,
   
  -When exactly you receive this error message? It is to start the computer or when starting any application?
   
  We will put the computer in a clean boot state to identify the application at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.