Logitech webcam C250 with windows vista sp2

Similar Questions

• Lightroom 4 runs on a pc with Windows Vista SP2, Intel Core 2 Duo T8100 - 2.10 GHz-4 GB RAM - NVIDIA GeForce 8400 M GT with 256 MB of memory? THX

  Lightroom 4 runs on a pc with Windows Vista SP2, Intel Core 2 Duo T8100 - 2.10 GHz-4 GB RAM - NVIDIA GeForce 8400 M GT with 256 MB of memory? THX

  Vista is spec'd for Lightroom 4.  Check the requirements of the system through the following page:

  System requirements | Lightroom

• Works with Windows Vista SP2, constant freezing, jumped through all the hoops and now it seems to be corrupted files after that I ran the sfc.scannow.

  Computer stops responding especially if I have more than 1 page open. Cursor problems, Outlook 2007 running super slow and not very responsive, ran the repair for this tool. Ran Ccleaner, checking virus, Malware, Spybot, clean disk, defragmentation, do a startup repair, chkdsk, and then the tool of sfc.  32-bit Windows system, Dell Inspiron running Windows Vista SP2 with an AMD Athlon X 2 processor.

  2009-12-27 17:39:41, Info CSI 000000 d 1 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:40, Info CSI 000000 d 3 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  ' 2009-12-27 17:40, CSI Info 000000 d 4 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
  2009-12-27 17:40, Info CSI 000000 d 7 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted
  2009-12-27 17:56:34, Info CSI 00000196 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:56:34, Info CSI 00000198 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:56:34, Info CSI 00000199 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
  2009-12-27 17:56:34, CSI Info 0000019 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ------------------------------------------------------------

  Part of the problem is probably SpyBot which can greatly affect the peformance IE and Vista/Windows 7.

  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  Double-click Service SBSD and change it to MANUAL and STOP

  Then run SpyBot and in settings uncheck TeaTimer - close and restart.

  Now you can run SpyBot as a scanner at the request.

  ------------------------------------------------------------

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  =================================

  If you still have performance problems:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Logitech Setpoint incompatible with Windows Vista Home Premium?

  I have Windows Vista Home Premium. I did a reinstall on a HP Pavilion a1600n desktop. At the same time, I bought the logitech mk700 keyboard and mouse combo. Immediately, I started having problems with the new mouse and the old mouse wired logitech that I used previously. The main problem is that the mouse will not click on the home screen where I have a choice of 3 desktops. I have to use the tab and arrow keys on the keyboard to select my desktop and logon. In addition, the mouse intermittently will not click on IE8 or Firefox 3.6 or the Windows desktop. It will highlight, but not to select the different boxes and necessary navigation buttons. I tried various steps including trying to update the drivers to the set point 6.1 (could not because cannot uninstall the setpoint 4.8 software) uninstall and reinstall and update drivers by using Device Manager and nothing works. Any help/suggestions will be much appreciated.

  Thanks for the reply. The problem turns out to be with Logitech hardware. It was a faulty mouse. Logitech sent me a new mouse and by using the set-point 6.1 or the 4.8 it works very well.

  BTW, I just did a clean install and have no junk, etc on the computer, but I ran different cleaning utilities just to check. See the thread above routine that I just finished.

• Problems in the use of headset logitech A-00009, with windows vista

  When you insert A-00009 logitech headphones, unknown device message is fired upward. No driver is found. How can I solve this problem?

  Hello

  When you use Windows Vista, you can see when you first start your computer you will need to activate the automatic updates get the latest USB drivers. This is because the factory install Vista do not have the series after the launch of USB drivers updated. It is a sign of this if your computer asks a driver disc after you connect a Logitech USB Audio product.

  Refer to: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/2193/related/1

  To turn on automatic updates to Vista, please refer to http://windows.microsoft.com/en-US/windows-vista/Turn-automatic-updating-on-or-off

• What type of microphone is compatible with windows Vista?

  Like Dan (above) I use a unit but Logitech appearing incompatlble with Windows Vista.

  What kind of microphone will allow me to record an audiobook?

  Sally O

  What is the model No. your current Logitech microphone?

  If the microphone is analog and uses a standard plug, then drivers for the microphone should not be necessary. It's the drivers for your sound card in your computer that must be compatible with the version of Windows you are using. If you are using a microphone connected USB so it is possible that pilots are required for the microphone too.

  P.S. I don't know that "Dan" you're talking about.

• "Not enough space" error windows install during the installation of Windows vista SP2 software

  Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.

  Hi tbilal22

  
  Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-

  http://support.Microsoft.com/kb/942288

   

  It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.

  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• Problems with Atheros 5007 802. 11 b / g with Windows Vista

  I have a laptop with Windows Vista sp2, and I try to connect a Cisco, Lynksis router E2000 wireless.  It does not work and I had a chat session with someone from Cisco, and he says it's my Atheros 5007 802. 11 b / g WiFi adapt which is causing the problem, and I need to upgrade. Where this to do and how. I've looked everywhere and can't seem to understand.  When I go to my driver Atheros and doing an "update", it tells me that it is currently being updated.  As you can tell I'm not super savvy, computer so any any help will be appreciated.

  My recommendation is not to uninstall the driver first and then reinstall unit manufacrturer Web site.

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• Installation Windows Vista SP2 fails with 737D error code

  When you install Windows Vista SP2 via Windows Update program, I continually receive an 737D error Code.  This error code says "Windows cannot update services and important files while the system uses them.  Save any open files, and then restart the computer. »

  Has anyone encountered this problem and found a solution?

  Thank you

  Joe Kunkel
  

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• repeated problems with HP550 / Windows Vista SP2

  Hi all

  the following problems keep recurring and the help of windows update does not respond:

  (1) I get a reminder to register my new product - I already did.

  (2) Windows update - continues to not install updates correctly - whenever it starts

  I have tried many tips/tricks to solve installation problems - but does not

  Can anyone suggest a work around

  Thank you

  Hello

  For your #1 question:

  Start > programs > Accessories > system tools > Task Scheduler

  Look for the tasks listed on HP., if you see them you can delete them or distributes them to run once. Who should take care of the problem

  For your question #2:

  There are a few services that are needed for starting windows update to work correctly. (these are services that depend on it).

  Take a read of this thread (found on another forum). BlackViper.com, there a nice breakdown of the Windows Vista SP2 service configurations.

  Kind regards

  ERICO

  Published by erico on 2009-09-19 12:13

• Windows Vista SP2, is error (0 x 80070490)

  I bought this computer in 12/2007 and Windows Vista SP1 is already installed when I bought, but now the updates for Windows Vista SP2 and when I click on install request I accept the terms, but then I get a this: ERROR NO FOUND (0 x 80070490) and I got to help, but this error does not appear on the errors. What can I please I need help ASAP!

  friend of Bill w.,
  Go through this article , because it gives the steps to solve the problem you are experiencing.  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 80070490 error code when you try to install windows vista sp2

  OK JUST LISTEN UP GUYS I REALLY REALLY NEED HELP!

  OK to start with I have a 32-bit with sp1 operating system.
  I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.

  It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?
  I HAVE A DVD OF WINDOWS, SO IT WON'T WORK

  SOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ITS REALLY ANNOYING
  

  Hello

  1. who is the antivirus installed on the computer program?

  2. What are the steps you tried to solve the problem?

   
   
   
  Download and install the update the system analysis tool
  80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/976920
   

  Search for the error message in the event viewer.

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Item was not found, error: ERROR_NOT_FOUND (0 x 80070490) installation of Windows Vista SP2.

  Original title: "WindowsUpdate_00000490" "WindowsUpdate_dt000" Vista Service Pack 2 update

  I tried to install Vista service pack 2 (32-bit) and I get the following error "WindowsUpdate_00000490" "WindowsUpdate_dt000" I tried to install with my anti-virus disabled and uninstalled and still it will not be installed.  He always tells me item not found, error: ERROR_NOT_FOUND (0 x 80070490).  What should I do?
  

  Hello

  You can try the steps in the following article and try to install the stand-alone package for Windows Vista SP2.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  You can also consult the following articles and check.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Learn how to install Windows Vista Service Pack 2 (SP2)