Workspace of HP: HP workspace includes a storage offer?

Similar Questions

• JSF Validation challenges - workspace included using schema HR

  Hi all
  
  With the help of JDev 11.1.2.1.0
  
  I have two validation issues that give me absolute fits and I hope that someone can get an idea. I created an example workspace that uses the HR schema to show my two challenges. It can be downloaded here: http://www.williverstravels.com/JDev/Forums/Threads/2336768/JSFValidationChallenge.zip
  
  Be sure to change the connection of the workspace to the HR schema with your username and password! I changed my default.
  
  
  (* 1) challenge #1 * (ModelValidationChallenge.jspx)
  
  -To see the problem, run ModelValidationChallenge.jspx and select an item in the drop-down list.
  -Country entity has a RegionId field. This field in CountryImpl setter method defines the scope of the Population to read ' a band! However, until the Set accessor method can be called, a red outline of validation is lifted due to the field of the Population being required.
  -In my main use case, I have a list of customers that what load default values selected in areas such as ConditionsPaiement, address, Commission, etc. through the entity is CustomerId setter method.
  
  (* 2) challenge #2 * (RowValidationChallenge.jspx)
  
  -To see the problem, run RowValidationChallege.jspx, insert a line in the detail view, and then select a value from inputLOV of the DepartmentId. Validation is triggered for fields that should be checked when sending.
  -Note that I use my own LOV binding as defined in the file PageDef.
  -In my main use case, I have an order / view of the master OrderRows / detail. When a customer adds an OrderRow, they have the option of selection of an element of an LOV. However, after the LOV selection in the popup, validation is triggered for the field. I don't want to set a default Qty 1. The user must enter a quantity, otherwise, the client could not forget to put the correct amount
  
  
  Any help at all would be appreciated. I have spent a lot of time to myself, but my knowledge of JSF Validation is sorely lacking. If there is anything else I can provide, please let me know.
  
  Thank you
  Will be

  Hey Wil,

  For your first case (IE. Defy :)) you must not do any ppr in the value change listener or immediately = "true" given that the value of 'Population' is put in the model, the same which will appear in view
  automatically. So just remove your only partialTrigger in jspx...
  Of more immediate = "true" must be used in double sure because it passes all validation of JSF and display the value to the model.

  Bug u set for the second it is not relevant to your case that is shaped layout and his shot jspx mandatory message level. your case is message mandatory level model...

  For your second case (IE. Defy :)) you must remove mandatory at the level of the entities, IE. end date and entity level required JobId is given just delete that only...
  Open your entity choose end date mandatory uncheck under details tab do the same JobId also...
  Keep required = "true" in compulsory level jspx will not shot choice departmentId LOV and only fire on submit.

  Hope this helps and solve your problems of two...

  Kind regards
  Suganth.G

• Assignment of additional storage in the workspace

  Hello
  
  There should be a simple answer to this question, but as I can't find it, I would be happy to help :)
  
  How can I request additional storage to a workspace as additional storage for admin/assign workspace as an admin of apex in v. 3.1?
  
  The manual (request Express User Guide Release 3.1) seems to refer to version 3 or earlier?
  
  Thank you!

  Hello

  You can approve the limits of the workspace through:

  http://localhost: 8080/apex/apex_admin

  You can request changes to workspace through the limits

  Home > Administration > service management

  Then click on storage request.

  Concerning
  Adam

• How do I remove/delete a workspace and all it's files?

  As a new user of the CVI, I created a number of workspaces (?) in the same folder. How can I determine what files are associated with the workspace who? Is there a way to remove all files associated with a workspace including the workspace?

  It doesn't have a way in CVI to delete Workspaces and all their associated files. You can see what files are associated with a workspace by opening the workspace in CVI or a text editor and looking at the files contained in this text file.

  For you help, I created a codebase uncommented in LabVIEW that will pass through all the files in your workspace of cws file and will invite then delete all files in the workspace.

  There are two things to note about this quick program. ((1) it does not remove the current workspace file (which is not a very hard to add addition) and 2) dependies of working space with long paths are split into several lines in the cws file. It DOES NOT combine these lines and will probably result in an error. Concatinating these lines (if you need it) is a task left to you but should be fairly trivial.

  This program was made in LabVIEW but it is no reason for a python script, or even a few well-designed grep orders could not achieve the same functionality.

  Kind regards

  Steven Zittrower

  Technical sales engineer

  National Instruments

  http://www.NI.com/support

• FDK - add custom modeless dialog box in the workspace

  (transferred to framedev and coaches, have no chance to get a response)

  Hello

  Someone at - it their own dialog box successfully added to a workspace, then got to

  appear when this workspace is selected or reset? The FDK doc implies that this

  can be done, but I can't understand it. I opened my save dialog box the

  workspace, but it does not come at the time when I reset the workspace.

  In fact, I didn't it works, because there must be some other crochet

  where I responded by running the appropriate code to open the box. FM couldn't know

  What would this code. But I can't understand how to use notifications.

  In particular, I can't understand FA_Note_Dialog_Create at all.

  Thank you

  Russ

  Well, I finally thought to it with greater experimentation. I think the answer is in the FDK docs, but it was difficult for me and my first experience has failed for some reason any. Pasted below is some info that I sent to Maxwell Hoffman at Adobe, in which case it would be interesting to their team of technical publications:

  RE: Adding a dialog box customized to a workspace

  It took me a long time to understand this because I think the FDK documentation lacks some details. Here's what he says now:

  "Because FrameMaker supports workspaces, modeless dialogs of the customer can become a part of a workspace. To do this, the customer must manage the notification FA_Note_Dialog_Create, who is sent to the client when the workspace must launch the modeless dialog box for a particular customer. »

  I guess the answer is there, but it wasn't enough clarify for me to understand at the beginning. I have finally understood that when you save a workspace when the dialog box is open, the notification and then is done automatically once you select or reset this workspace in the future. There is also the fact that "sparm" is set to the name of the dialog box, you need to test in order to know how to react. So, I would recommend adding some verbiage that is similar to the following:

  When a workspace is saved with a custom open modeless dialog, name and positioning of this dialog box are stored with the workspace. Then, when the user selects or resets the workspace, FrameMaker sends the FA_Note_Dialog_Create to the respective customer with sparm set to the name of the dialog box. It is then the responsibility of the customer to manage the notification and run the code needed to open the new dialog box. Once the dialog box is open and the client code stops, the workspace setup routine will continue and position automatically dialog as stored in the workspace.

  Note the following points:

  -FA_Note_Dialog_Create is sent when the workspace includes a custom dialog which was opened after you save the workspace. If several custom dialog boxes have been opened, individual notifications are sent for each.

  -Customer notification code must reopen the dialog box itself (F_ApiOpenResource(), etc.), then it will position the workspace.

  - As all notifications, you must enable FA_Note_Dialog_Create with F_ApiNotification().

• Invitation message included in the mail but does not display a new lines

  When he invites to join a workspace of Beehiveonline I use the Message of Invitation to guide new users through new content. This is necessary, because new users don't even see the workspace unless they go and change all my work spaces, as well as to point the finger the in the right place in the workspace. However, the text becomes a single blob, no newline / carriage returns:
  
  Target group: Welcome to the workspace process accelerators! Once you go to https://beehiveonline.oracle.com/teamcollab/ with your account *, please make sure that access you the contents of process accelerators under workspaces, all of my workspaces. Please access the content in the space the document library, where you will find the documentation and installation and discover the different Forums in the workspace, including Installation (related to the installation of the tips & tricks or questions), accelerators of the future and other Discussions. The PDF "Guide for Oracle PA Content" under the Library - Documents can help you navigate the content of the site. We suggest that you run the UPKs for the not interested (see end of this email). We look forward to your comments. Please keep in mind that the information provided through Forums are shared with all participants of the workspace. Please also check PA content published under OTN to: http://www.oracle.com/technetwork/middleware/bpm/learnmore/processaccelerators-1609559.html Best looks, The Oracle accelerators process team Twitter: @OProcessAccel YouTube channel: http://www.youtube.com/user/OProcessAccel

  Cesare,

  The formatting should be fixed now - the text has been added to a form HTML as such, became text packed - I see that this can be a problem if a large message formatting is used and changed the code to make it HTML itself and it will retain the formatting.

  Your comment "new users do not see even the workspace unless they go and change all my workspaces!" is not quite correct, because they will all have been sent a welcome to the enamel of the workspace and if they click on the name of workspace in the email, they will be taken directly to the overview page of the workspace.

  Phil

• How much storage SSD drive iMac molten?

  Hi all

  I am considering buying an iMac to replace my old MacBook Pro, and I was planning on getting to the fuser unit.  However, I discovered that in October 2015, Apple has downgraded the SSD in the 1 TB Fusion road for 128 GB to 24 GB iMac.

  So my question is twofold:

  (1) is the Fusion Drive 1 TB iMac has always only 24 GB of storage in the SSD?

  (2) what is the SSD in the Fusion Drive 2 TB iMac?

  I tried Googling for any new information, but what I find is October 2015, and Apple just says that people who buy the iMac 1 TB or 2 TB drive of Fusion can upgrade their SSDS up to 256 GB, without saying what is included by default.

  Thank you very much!

  Rachel

  See quote below. (This is from the link "how much storage is right for you?" in the section of storage on the following page: http://www.apple.com/shop/buy-mac/imac?product=MK142LL/A & step = config )

  Merge to disk 1 pairs of a hard disk of 1 TB with 24 GB of quick flash - enough to store files of OS X and applications in order to ensure a quick start, near wake instant sleep and quick application launch, with room remains for the most frequently used files and important applications. 2 to and 3 to pair of Fusion results in a hard drive more than 128GB of quick flash storage, offering even more space for your most frequently from the files used. For best performance, systems iMac with 32 GB of memory must be configured with a 2 to big merger or any flash storage.

• Need controller for Vista for my Satellite P200 mass storage

  Hi all

  I did just install Vista 32 bit OS.
  Because I didn't have the chance to use the recovery CD I had to use the new Vista installation.
  In the end, I found all the drivers on the support except for one page.

  * Mass storage controller *.
  * Vista 32 OS *.
  * Computer laptop Satellite P200 *.
  * Model PSPB6E *.

  Could someone show me the way where appropriate driver?
  TNX for all the advice
  Sandi

  Hello Sandi

  All the drivers for your laptop, you can find on the download page of Toshiba

  You can find it on this path:
  Type of Products > portable
  Family > Satellite
  Product series > Satellite P Series
  Model > Satellite P200 (PSPB6)
  Model short-term > PSPB6E
  Operating system > Windows Vista 32-bit
  Driver type > all

  All drivers Vista will be there including the Storage Manager.
  The first document to download, you will see instructions for Installations. Please install all the drivers, tools and utilities following this order of installations. It is very important to install everything in the order of good facilities.

  If you have any other questions let us know.

  Good luck!

• The cheapest "Creative cloud photography Plan" includes it Bridge and Camera Raw?

  Hi people, I have used creative cloud four years now, only to use Photoshop for my work. I pay £17.58 per month (UK), but it seems to me that I could actually pay half, AND get included Lightroom (I'm on a subscription "an application" from now)... the problem is, I can't seem to find all the information about knowing if Bridge and Camera Raw would be included in the "Plan of photography" - they are essential for my work , so can not risk changing room for this plan, unless I know for sure. If anyone has the answer, it would be great. And if this is the case, can I also get 4 years of repayments, as I feel a little like I'm torn right now!

  Hi monkdave,

  There is a special plan designed for photographers, called "photography Plan" that includes Adobe Photoshop CC 2015, Lightroom CC 2015, CC 2015 and Camera Raw bridge.

  I think that the plan that you have right now is called "Only one App membership only for Photoshop" and this plan includes cloud storage space more (20 GB) relatively in terms of photography.

  Reference: Lightroom and Photoshop | Plan of creative photography of cloud of Adobe

  Kind regards

  Mohit

• SAN with VMware Fault Tolerance storage redundancy

  We built a new data center, with the idea in mind to use VMware Fault Tolerance to create a virtual environment without service interruption between two data centers.  The goal is to have the VMs to continue to operate even with the loss of access to an entire datacenter, including SAN storage units.

  I'm looking for a way for a vSphere 4 virtual infrastructure to be able to write to storage replicated in two different datacenters (with low latency of connections between data centers).  We can do with the networks and host servers, but I found nothing in the documentation of tolerance to failures to mention something else 'shared storage' we have experienced a failure of the individual units of SAN storage (including total loss of hundreds of virtual machines) and hope that we can eliminate the unit of storage as a single point of failure.

  Someone did he do it, or how it could be done?

  Hello

  In order to clarify what idle-jam talks about, you can watch this video of HP and VMware on YouTube.

  -hth

  Kind regards.

• Storage vMotion with advanced vsphere license

  I have the vSphere advanced license that doesn't include a Storage vMotion.

  This does mean that I won't be able to do manually storage vmotion with this license, or is what is not included in the new vSphere GUI?

  You will not be able to make Storage VMotion.

  But many people say Storage VMotion, even when cold migration is performed. Thus, you will not be able to move VMS on another store data seamlessly, without power off VM.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Deploy all TestSequence

  Hi, I have developed a sequence of TS4.2.1 Test on my development PC. Now, I have to deploy on the client machine. The target computer has only the TS runtime installed, but it has all the software package already installed (llb, screws, ini, dll files, etc.) because on this machine is already running another test sequence.

  The customer asked me to install my test in the following sequence:

  1. Don't change any folder o path on the target computer.
  2. Don't overwrite the already installed code module.

  I should install only my Test sequence! I never did like this installation. Usually, I create a workspace including all.

  Do you know if it's possible?

  Thank you very much for your support.

  Hi, maybe I have not very well explained my problem, for sure it was not really clear, not even me. In my mind the target machine was a virgin machine with none OR sw installed. I thought to run the installer of the test sequence and nothing more (it also install LV runtime). This solution work (and I use it) If you put in the al Installer the software module as the code use test. It creates all the internal links and create a support folder where all the sw modules are installed. But this isn't what I was looking for because I didn't have to change the environment of sw.

  The solution is much easier. I installed on the target machine the development of the TS and the BT. I set up TS to work with runtime LV and I left the evaluation license has expired. In this case the sequence didn't need be re-issued to all modules of sw. In this case, I can change a VI or the TestSequence without changing anything else.

  Thank you all.

• The TS engine insists that my VI prorotype changed after deployment

  But I don't see how, or when, and where.

  I hope I'm just something wrong. My situation is:

  System dev has Dev Suite, using TS 4.2 and LV 8.6.1

  Target system has 4.2 TS, LV 8.6.1 TIME std Base deployment engine

  @ Dev system (TS Seq Ed)

  • TS workspace
  • Outside the program is screw, the workspace includes 3 screws loaded dynamically and the executable file generated from the interface chart single of TS in LV
  • Configure-> adapter-> LV Dev system 8.6.1
  • Tool-> update VI calls
  • (Note that no prototypes have been updated)
  • Tools-> TS unfold
  • Load the deployment configuration file
  • The different ha from the default deployment configuration:

  "Deploy the TS file files" checked

  In "Options of LV' of files distributed:
  'Check for screws broken when parsing' checked

  "Check for broken screw after the Build" checked

  "Remove Unused Components VI" checked

  A program element for the executable of the user interface

  'Create an Installer' checked with the specified directories

  No drivers or selected engines

  • BUILD
  • Tell it to erase the old build directory
  • Generation seems OK - 1 caution regarding the name not renamed/moved (Blasted HP8341 driver)

  Copy the directory Vol 1 tree that results in my flash drive.

  @ The target system (even once, at TS 4.2 base deployment, LV 8.6.1 std RTE)

  • Plug a flash drive
  • Navigate to the installation directory
  • Run "setup.exe".
  • Click on Installer
  • See install go
  • Launch the executable file of the user interface
  • Press 'OK' to the admin, no passwd login
  • Point it @ my SuperDuperSpiffyCoolTS.seq file
  • "Single Pass".
  • BOOM

  "Error loading step"xxxxx"in sequence 'MainSequence' in the file 'SuperDuperSpiffyCoolTS.seq'.

  The prototype of the VI '' has changed.

  The prototype must be updated before you run the VI.

  To update the protytpe, open the dialog box specify Module

  Could not load the related module of a mandatory step. [Error code:-17600]

  • The stage on which it fails is the first step of the 'action' with a LV module in the sequence.

  I can fix by running the sequence 'programmatic_reload.seq' TS OR on the SuperDuperSpiffyCoolTS.seq installed on the target machince and everything works as expected after that.

  So where are my prototypes VI being changed? As part of the deployment step?

  Thanks for any idea/thoughts/help

  Tom McManus

  Hi Tom,

  In my opinion, that you see this behavior because you have the option to "Delete unused components VI" checked in the dialog box Options of LabVIEW VI. If you uncheck this option, your deployment will build properly and you will not see this error on your target computer.

  I tested your attached files with the 'delete unused components VI' option checked and reproduced the error but was unable to reproduce the error with the option unchecked.

  Please test this workaround solution to see if it behaves correctly your side also. Thanks for that bring to our attention! We will work to fix this in a future version of TestStand.

• Wrong turn.

  Sorry to have so many questions.  Perhaps my keyboard is weird or something.

  In any case, as you can see the form, images, that the training film told me, it's when I edition-> processing-> rotation, I should get the image to rotate.  However, when I do, what I get is the frame surrounding the rotating image.  Any thoughts?

  Thank you.

  Kenneth

  Can you give us a screenshot of your Photoshop workspace, including the layers panel?

  Here's how: FAQ: how to capture and after a video screen or blow?

• APEX migration associated with tables, etc. to a new database

  I'm trying to migrate from the APEX linked tables, (for example, users, etc.) but it doesn't look like an easy thing.

  I can easily use the Data Pump to move any existing scheme, but when I do that the schema of the APEX, every thing will be mixed and won't.

  What is really the best way to get the schema of the APEX, has anyone done this?

  Mehr

  Export workspace (from pages of the Admin of the APEX) allows you to export your workspace including all users.

  Export demand (from the APEX application Builder) allows you to export your applications - metadata of the APEX.

  DataPump allows you to export your data schemas.

  Simple and fast - I just did the same thing tonight to move applications from one server to another.