Workspace settings not retained after restarting.

Similar Questions

• personal settings not retained after restarting Windows XP

  After that my professional trustworthy repaired my system and reinstalled Windows XP Pro (SP3), it was OK until I started to reload security applications (such as the ZoneAlarm firewall, blockers of spies, etc.)
  Now, whenever the system reboots, all personal settings are lost (even though Windows says ' save settings' then stop).  Keyboard settings, folder view settings, icon placement, etc. - all is lost.
  I searched the Knowledge Base and Forums, with no obviously related results.

  Help?

  Try disabling TeaTimer first. It will certainly impact the registry change. If this does not work, uninstall.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

  I work in the field environment.
  Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
  but it runs on the Windows XP computer.
  For example:-Inventory.exe (work), Sales.exe (does not work)
  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• The mouse settings not saved after reboot/restart

  I'm changing the speed at which my mouse pointer moves on the screen.  I'm doing a 'demand' the change, and then click on 'ok '.   The point of the mouse moves faster in the game.  Then after reboot/restart the computer, the mouse setting is default slower movement speed.   The changes are not saved after reboot.   What keeps the change of speed of movement of the mouse to be saved?

  Mr. Brian,

  Please, try the following steps.  This should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  1. click on the Start ORB, type msconfig in the Search box and hit Enter
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
    2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to them (there may only be a)
  4. click OK and restart your computer
  5. after reboot, change the speed of your mouse pointer and restart

  This should solve your problem.  Please let us know.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Paired Remote App not recording not peel after restart of Apple TV 4

  Paired Remote App not recording not peel after that Apple TV 4 is restarted.

  I have paired a remote with Apple TV 4, but that pairing is not saved after I power cycle the Apple TV 4. I checked with an Apple TV 2 and it stores the remote pairing when it is the power to bike.

  Y at - it a setting or something I missed? Or is this a problem with the current software on the Apple TV 4?

  Thank you

  -Jeremy

  Oh, it's working now. It was a problem with the device I have matching and not the Apple TV 4. Disregard this message.

• Pavilion: the mouse settings not saved upon restart

  Just bought a brand new HP Pavilion with windows 10 for £400. I'm about to return to the store unless someone can help me solve the reason for which the mouse for the touchpad settings will not save after reboot. Help, please.

  @C17

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Webapp workspace does not upward after upgrade to EPM11.1.2.2

  Hi all, after the EPM11.1.2.1 update to 11.1.2.2 workspace does not open upward on IE8/9. Note that HSS works very well.

  I get the below error:

  URL: http://Foundation-Server.company.com:28080/workspace/index.jsp

  Web page:

  < html xmlns: v lang = 'en-IN' dir = "ltr" >
  < head >
  < title > Oracle EPM System 11 < /title >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF - 8 ">
  < meta http-equiv = "MsThemeCompatible" content = "yes" >
  < meta http-equiv = "ImageToolBar" content = "no" >
  < link rel = "shortcut icon" href = "bpmstatic/favicon.ico" type = "image/x-icon" > "
  < link rel = "icon" href = "bpmstatic/favicon.ico" type = "image/x-icon" > "
  "< link type =" text/css"rel ="StyleSheet"href="bpmstatic/thirdparty/bindows/html/css/bimain.css ">
  "< script type =" text/javascript"src="bpmstatic/thirdparty/bindows/html/js/application.js "> < / script >

  < / head >

  < body >

  The system is unavailable due to initialization error. & #10; & #10; There was an error initializing the system registry: workspace product node has several logical webapps.  Check the contents of the registry...

  < / body >
  < / html >

  I executed the script of register - cleanup.sh but it does not detect any problems with the workspace of the nodes.

  Everyone was faced with a similar problem?

  Thank you

  Kent

  Solution: I've worked with Oracle's Support team, and they were able to identify the node that should be removed from the register. Workspace then started and I am able to connect using the connection shared in SmartView... But there seems to be a problem with the rendering of web application in the browser (I still see JS errors); don't know if this is a related question...

• Could Calendar services not available after restarting LDAP problem?

  I followed the installation guide:
  
  https://wikis.Oracle.com/display/CommSuite7U2/communications+suite+on+a+single+host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
  
  I have correctly installed and configured the Server Update 2 Oracle UCS Sun7. Calendar works (if I don't reboot the server).
  
  
  However, when I reboot the server, calendar service is not available.
  
  
  Important information for when I installed Oracle UCS Dim 7 update 2 by following the installation guide:
  
  I noticed when browsing through files, there is already a folder "dsee6" for the Linux Oracle I started from. After the installation of the example for the Oracle Linux 5 with GlassFish install, I had to download a new directory server. By following the instructions on page 7 of the listed installation guide above, I did another folder "dsee7". I wonder if I would have never downloaded this new directory server by following the instructions on page 6 "obtain software". In fact, the installation guide does not mention where to find the directory server, so I went to the site of delivery and figured it out myself. in any case, in the section 'Installing and configuring directory server', #3, I was instructed to "mv dsee7/opt/sun/directory. In this folder, / opt/sun/directory/bin, there is '. '. "/ dsadmin" utility that can be run. This serves to do many things with the directory server, including start-up. This is how I started it:
  
  CD/opt/sun/directory/bin
  . / create/var/opt/sun/directory/dsins1 dsadm
  . / dsconf create suffix '0 = isp.
  
  Also, I downloaded the delivery directory server - Oracle Directory Server Enterprise Edition 11 GR 1 material Patch Set 1 for Linux x 86-64
  
  Then, I found myself running to implement:
  
  . / dsccsetup ads - create
  . / dsccsetup war-file-create
  $. / dsccsetup cocoa-reg
  . / dsccsetup State
  
  Then, it seemed that dcss agent is registered in the cocoa.
  
  So, if we pass to come to page 9 of the installation, "Preparation of the directory" guide, I ran this and prepared the directory. After installation is finished, I could restart the server directory without any problems, as long as I do not restart the machine. I would like to restart the server directory as follows:
  
  CD/opt/sun/directory/bin
  . / dsadmin stop-domain domain1
  . / dsadmin start-domain domain1
  
  However, if I rebooted the machine, I could always start and stop the server directory as shown. But the calendar Services were not available.
  
  The only reason I question this LDAP server that can be the cause of this is because at one point, I had configured the services to run at startup. I followed these instructions:
  
  https://wikis.Oracle.com/display/CommSuite7U2/start+and+stop+scripts+for+communications+suite+%28Linux%29
  
  I use a VMSphere client to host this set upwards. So, given that this point the configuration of services at startup, I rode hanging at the rear so that services are more fixed upward to run at startup. But when they were, and I restarted the machine, I could see 389 ldap errors in all directions. So, which drive me to roll my snapshot in effort to try to correct the ldap errors. I no longer get LDAP errors as I drove my instant return. But, as I said, I have no more services, including LDAP, to start Protocol started as shown in the above link that tells us how.
  
  After restarting, I run these commands to get the server up and running:
  
  Start the GlassFish server:
  CD/opt/sun/SUNWappserver/bin
  . / startserv
  
  Web start (mail server I think):
  CD/opt/sun/comms/messaging64/bin
  . / Start-msg
  
  Start LDAP (directory server)
  CD/opt/sun/directory/bin
  . / dsadm start/var/opt/sun/directory/dsins1
  
  Start Mysql
  CD/etc/init.d
  . / mysqld start
  
  All these commands complete without problem. I can connect on the web of convergence, I can hit the Managing Director, I can connect to the GlassFish administration console, and I can see my calendar folder when I hit him in the web (http://myServer.com/davserver/dav/home/userName/calendar/).
  
  So, in summary, I was wondering if anyone knows if it assumed that second directory server is causing problems since I started with Oracle Linux 5 and Oracle Linux 5 seems to have the dsee6 file already installed with it. Would be - why my calendar services do not start after reboot, but work before the reboot?
  
  
  (Also, all my messages to keep deleted.) Can someone please send me an email if someone Oracle is deleting my messages and tell me why they are removed? )
  
  Published by: ntfytim16 on March 5, 2012 07:41
  
  Some of my steps were unserviceable. Cleaned them is easier to understand.

  You stop/start the GlassFish server container:

  https://wikis.Oracle.com/display/CommSuite/Calendar+Server+7+Administration+Guide#CalendarServer7AdministrationGuide-StoppingandStartingCalendarServer

  Joe

• My custom workspace does not randomly.  Restart the application sometimes fix it.

  Y at - it a fix for the problem of my custom workspace does not not every time?  I was hoping that it was just a problem with CC2014.  I'm under CC2015 now.

  Quit Illustrator

  Run disk utility and set your permissions.

  Finder (hold down the Option key) > select Library > obtained in this folder

  / Library/Application Support/Adobe/Adobe Illustrator 19.

  Adobe Illustrator 19 and rename old Adobe Illustrator 19

  Start Illustrator

  I would upgrade to El Capitan.

• eHome receiver sometimes does not work after restarting

  Sometimes my Receiver USB ehome stops working after a reboot, and it has the most recent drivers from Microsoft that is the only driver for the device. I use it with Windows Media Center, and sometimes it doesn't work after reboot, or after the release of sleep. I tried to disable USB suspend but which did not work.

  Hello

  Thanks for posting your question on the Microsoft Community.

  It should be the following information so that we can help you further:

  What happens to the eHome USB receiver when the system restarts or wake mode 'sleep'? It gives you an error message, or simply, it does not?

  Verify that all devices are connected to the USB.

  Try to uninstall and reinstall eHome receiver and check if this solves

  Remove the pilot of transmitter/receiver infrared (IR) of the Windows Device Manager to force Windows to reinstall the driver. You don't have to restart the computer when you perform this procedure. To remove the pilot of transmitter/receiver infrared in the Windows Device Manager, follow these steps:

  1. Click Start, right-click my computer, and then click Properties.
  2. In the hardware tab, click Device Manager.
  3. Expand Human Interface devices.
  4. Double-click Microsoft eHome infrared transceiver.
  5. On the tab driver , click Uninstall, and then click OK
  6. Disconnect the IR receiver to the computer.
  7. Wait 30 seconds, and then reconnect the IR receiver. Windows the receiver automatically detects and installs the appropriate driver.

  In addition, update the last chipset and drivers USB of the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-isn ' t-work correctly

  Check in the BIOS if no energy saving option is enabled for the USB ports:

  1. Restart the computer.
  2. When the manufacturer logo to enter the BIOS settings, press "F2" . (The exact key may vary and is usually displayed on the screen for the system to start).
  3. Go to the "Integrated Peripherals" menu using the arrow keys. If your BIOS does not have a menu on-board devices, select "Advanced BIOS Features".
  4. Select "USB controller" using the arrow keys and press 'Enter' to change the setting of "disabled" to "Enabled". Once disabled, the computer does not recognize USB devices when connected.
  5. Press "F10" to save the settings and exit the BIOS.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps. Please get back with the results.

• the proxy settings not detected after automatic update

  Following automatic updates on Thursday, I can access is the web.  About Network Diagnostics for Windows, the message error is 'Windows could not automatically detect the network proxy settings '.  I don't see that I have all the proxy settings...  I have a HP Desktop PC HP P6-2260, and I use Windows 7.  It works OK if I do a system restore - but I don't want to have to do one of these whenever I go on the computer.  Any suggsestions?

  Thanks Jaco.  I had a good overview of the updates that have been the cause of the problem.  Many of them related to security, so I checked my security software, and after execution of updates it y it has solved the problem - microsoft updates must have been clashing with updates of security in a way.

• mute dv4 1225dx windows 7 button does not work after restarting

  Hello world. I will try windows 7 on my pavilion laptop and everything works perfectly except the button mute who does not work (do not put on mute or turn red). I installed the driver sp45073 which is supposed to be the one to W7 64-bit. the curious thing is that it works perfectly once the computer restarts after the installation, but if I restart again, it stops working. If someone could help me that would be great. Thanks in advance,

  Well, I ended up reinstalling windows 7 64 and it works now. It seems that the problem was the installation of the drivers via windows update. I just installed those appearing on the hp Web page and there is no problem so far.

• NotificationGlobalSettings modeChanged signal does not work after restarting

  Hello

  I test this on the OS SDK 10.2.1.1927 for my Alpha of Dev C. My application is headless without long-term stop. The signal and slot work perfectly upon deployment of app on device. My slot is called as soon as there are changes to the Notification Mode of the phone.

  But once the restart of the device, for some reason any. Housing starts running headless, the signal and slot is CONNECTED, because I use the bool to check if the connection is successful. And yes it returned true for the connection.

  But in fact, my slot is not called at all. All changes may not be received. Someone at - it get the same question?

  OK, get it fixed. I don't know if BlackBerry will fix this in the operating system or not, but in case you need, then the another work-around is to delay the connection.

  Delaying the call connect to connect this signal modeChanged (bb:latform::NotificationMode:Type) to your site that handles things when the overall Notification Mode is changed.

  In my case, I tested with a delay of 3 seconds and it does not work properly. After the device restarts, it still works properly.

• Can turn on virtual memory, but it is not retained after reboot

  I'm unable to set up virtual memory.  Advanced settings screen appears when the computer is strarted, but entries changes do not take effect when the computer is restarted.

  I don't think it's possible to run that Windows 7 unless it uses virtual memory.  I guess that you're having trouble seting the paging files, is that correct?  If so, you want to do this via the Control Panel System applet.  When you're there, click Advanced settings.  Then under the Performance section click on settings and advanced options.  Under virtual memory, click on change.  From there, the best thing to do is check the box that says automatically manage file size of exchange for all readers.  Until you return to the desktop, and then click OK.

  Good luck.