Workstation 8. Could not open the file "C:\VMs\ < vmname >-< vmname > - 0000001.vmdk ': the system cannot find the specified file.

Similar Questions

• TrueSuite Fingerprint error "error: could not open the specified database.

  Hello

  I bought new Toshiba Satellite P300-PSPCCA two weeks back and fingerprints worked very well. Suddnlly stoped working. I was getting connection to fingerprint for the unavailable error message when I start my laptop. I try uninstalling and reintalling software Truesuite and dirvers but no luck. I downloaded the latest version of the software from toshiba Web site but still no luck.
  I was looking for a solution and I have read on several forums that must back the driver, if who does not then the only solution would be the factory default setting.

  I try to roll back the drivers, but still, it does not solve the problem. Finally, I put my laptop to factory default and still having the same error message...
  I also tried to delete all fingerprints via the Truesuite software but I get "error: failed to remove fingerprints...

  It has no option in the bios to wipe the fingerprints of memory... because I saw in IBM there is option in the bios to remove the fingerprint via bios... but not at toshiba...

  I really need help with my problem... Please... someone help me...

  Kind regards
  Jay

  Hello

  These questions are not easy to solve. Many people have noticed problems with this software and everything what you have done is OK, but one thing is strange to me.
  After the new installation of the operating system using the Toshiba recovery image everything should work perfectly. After doing this you have the same situation as after the purchase and start. Then I don't understand how you can have this problem again. The fact is that the stored data will be removed by cleaning the drive HARD or OS recovery to factory default state.

  On this forum, you will find many similar topics. Please put impossible to open the database specified as search terms in the advanced search option and check the listed topics. You may find the final answer.

  Good luck!

• ORA-00210: could not open the specified control file

  ORA-00202: control file: ' / u01/app/oracle/oradata/DB11G/STANDDB/control01.ctl'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  ORA - 205 marked during: ALTER DATABASE MOUNT...

  Did you check the alerts log.. ?

  have you checked the control file is available in this mount point... ?

  When you have this error... ? I mean what you're trying to do... ?

• Portege R600 of fingerprint problem: error: could not open the specified database

  Hello

  I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
  I tried also on windows XP and Vista.

  Has anyone with the same problem or anyone suggesting a solution?

  I uninstalled the truesuite Access Manager but still the same problem.

  See you soon.

  Hello

  I noticed a new update for software fingerprinting for protected R600.
  Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
  Then reboot again.

  Download the fingerprint on the page of the European driver Toshiba Software and install again.

  Check it out!

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• Could not open the file sml nokia

  Could not open the file sml nokia

  Hello

  The operating system that you are running on your computer?

  You must identify a program to open the file. Associate the fily type with a program, and check if it helps.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Could not open the file on the computers hard drive Windows

  Let's first if I'm in the wrong place, I'm sorry if I'm not at the speed that the rest of you try a point of view, I'm not an expert in computers, in any case, my problem is that Google will not launch task bar or in the browser. I ran chkdsk a couple of times and still nothing, but in my action center it says "Windows could not open a file on your hard drive of computers 3 times, last on 17/08/2014 16:58 go online to the troubleshooting steps" when I view the message details he said that the solution can not be downloaded. Most likely causes: the problem report for this solution has been deleted or changed on this computer and the East is no longer available any help would be greatly appreciated

  I just did a clean boot and it seemed to fix my problem with the launch of chrome, so if someone has the same problem and then perform a clean boot

• Signature keys: could not open the file of the LSB

  Hi all BB Dev´s!

  I m new BB10 Webworks development. My first steps in the development of the BB Apps I did with MDS Studio a few years ago... But that's another story ;-)

  Now, I developed a small application via Webworks and want to test on my Z10. So I just got my two SJC files and tried to set up my Mac (Mountain Lion) to sign the BB apps as described on this page:

  http://developer.BlackBerry.com/HTML5/documentation/signing_setup_bb10_apps_2008396_11.html

  In step 3, after the order of blackberry - sign, I get the following error:

  Error: Could not open the file CSJ: /Path/to/my/csjfiles/client-RDK-1976876.csj

  Someone at - it a tip for me to get this running order? Or is there a any error a fact?

  Would be happy to comment :-)

  Thank you very much

  Best regards

  Lars.

  Have you copied the file .csj in the following directory:

  C:\Program search in Motion\BlackBerry 10 SDK WebWorks 1.0.4.11\dependencies\tools\bin

  ??

• XmlDataModel could not open the file

  Hello

  I can't seem to understand how to fix this (attention: XmlDataModel could not open the file "... /..") /.. (' / data / model.xml ').

  what I have is the following,

  generate an XML file using the QXmlStreamWriter and after you have created the file (confirmed that the file exist) create a new XmlDataModel

  // modelfile is define in the h file like QFile *modelfile;
  
  modelfile = new QFile("data/model.xml");
  
  QXmlStreamWriter* xmlWriter = new QXmlStreamWriter();
  xmlWriter->setDevice(modelfile);
  
  // do the xml write stuff
  
  modelfile->flush();
  modelfile->close();
  
  XmlDataModel *dataModel = new XmlDataModel();dataModel->setSource(QUrl("../../../data/model.xml"));//dataModel->setSource(QUrl("modelx.xml")); << file in the asset folder to check if this works ( and this works )listview->setDataModel(dataModel);
  

  THX,

  Xtravanta

  Found the solution:

  dataModel-> setSource (QUrl::fromLocalFile(QDir::homePath() + "model.xml"));

• JavaLoader error: could not open the file

  I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed.  the javaloader that I use is the one in the eclipse installation folder:

  C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin

  I use this version because I used to develop the small JRE 4.2.1 application in eclipse.

  and the command is: javaloader.exe u load myapp.cod

  I get just the error: error: could not open the file and nothing is copied to the device.

  The connection is good because I am able to see the device help info: javaloader-u deviceinfo

  I have just the knowledge base on the development for BB and it's my first show stopper...

  Thanks in advance for your help

  This is the solution... I managed to install the application without delay!

  Thank you very much

  Jesus

• Where can I get help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly d

  Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.

  Hi brionp43071032,

  Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files

  Let us know if you still experience the problem.

  Kind regards

  Meenakshi

• [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  I run the lesson 2 TemperatureSensor project

  I can detect the BMP180

  PI@raspberrypi ~/javame81ea/bin $ sudo i2cdetect y 1

  0 1 2 3 4 5 6 7 8 9 a b c d e f

  00:          -- -- -- -- -- -- -- -- -- -- -- -- --

  10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --

  40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  70: -- -- -- -- -- -- -- 77

  I can retrieve the info from I2CDeviceConfig

  
  

  Name of the controller: null

  Controller number: 1

  Address: 0 x 77

  Size: 7

  Clock frequency: 3400000

  My API permissions are

  jdk.dio.DeviceMgmtPermission "*: *" 'open '.

  JDK. DIO.i2cbus.I2CPermission "*: *".

  But when I try

  myDevice = DeviceManager.open (config);

  I get

  [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  Any suggestions?

  Ah.

  You run usertest.sh as root?

  sudo./usertest.sh

  Needs me root access to the devices.

  Tom