Workstation cannot find the VMDK file, but it exists.

Similar Questions

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• Audio beats cannot find the .startup file

  Whenever I try to use the Panel Audio Beats on my Pavillion DV6-6102AX it comes up with the error "cannot find the .startup file! I use Windows 7 64 bit and I also tried to reinstall the audio driver IDT, but that did not solve my problem.

  Hello

  Try the following.

  Open Windows Control Panel, open programs and feature, do a right click the entry for IDT Audio and choose uninstall.  Once this process is complete, restart the laptop.

  When windows has completely recharged, download (unless you already have this file) and install the latest driver IDT at the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  Yet once, once the installation is complete, reboot the laptop.

  Kind regards

  DP - K

• An installation support file could not be installed. The system cannot find the specified file

  I'm trying to get rid of some programs on my Windows xp, but the following alert continue to flock to the top: an installation support file could not be installed. The system cannot find the specified file

  Hello

  • What programs you try to uninstall?

  You can check this link:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• Cannot install Nero 10 Multimedia Suite Platinum HD because it cannot find the following files: VC Redist 2005 KB973544 (x 86)

  Original title: getting specific files

  I try to install Nero 10 Multimedia Suite Platinum HD, but it will not be installed because it cannot find the following files: VC Redist 2005 KB973544 (x 86)

  VC Redist 2008 SP1 (x 86) Direct 3D 9 Extensions 9.19.949.46 9.19.949.1104 9.24.950.2656 9.27.952.3001 Direct 3D 9.27.952.3022 HLSL compiler

  Reboot Validator

  My system is XP SP3 2 Gig of ram and all updates are underway.

  Hi DJ Wilfred.
   
  Download the stand-alone package of these updates and install it manually and check to see if it helps to fix the problem:
  Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update
  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
   
  In addition, refer to this article:
  Description of the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package: July 28, 2009

• System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe"on Windows 8.1

  I've updated my OS to Windows 7 64-bit edition of Windows 8.1 pro 64-bit, and when you try to reinstall the software and the driver for my printer HP Officejet J4580 all-in-one I get all sorts of errors. It worked perfectly on Windows 7.

  I get the most common error is: System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe', as well as the facility is abandoned.

  I tried a lot of solutions from the HP Web site and these forums, but my problem is still there.

  I already tried the long solution presented here:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/install-error-quot-the-system-cannot-f...

  and

  http://support.HP.com/us-en/document/c04206080

  I even found the directory where installation has been decompressed and copied to the desktop, but the error persists.

  I need the complete software because I need to use my printer Officejet scanner, so I can't just simply print drivers.

  I need desperate help on getting this new work.

  Specifications of the computer:

  CPU: Intel Core i7 - 4820 K Quad-Core 3.70 GHz 10 MB Intel Smart Cache LGA2011

  : DDR3 memory / 1866 MHz Quad Channel 16GB (4GBx4)

  Printer: HP Officejet J4580 all-in-one; connected via USB

  OS: 8.1 Pro 64 bit Windows

  GPU: AMD Radeon R9 200 series

  I finally solved it by myself after many hours of pain.

  I clean any installation of HP from my computer using the HP Officejet software and driver removal utility:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110151-1&cc=us&DLC=en&LC=en&OS=4158&product=3645100&sw_lang=

  After the computer restarts, I moved on the desktop, the installation directory unpacked that HP printer install wizard for Windows had previously downloaded and launched.

  I deleted all files in the directory %Temp%.

  I disabled McAfee antivirus real time and Windows Deffender analysis.

  I ran the setup.exe in the installation directory in my office.

  The installation is smoothly and completed. I have already tested the printer and all features function normally.

  I hope these steps help someone with similar problems to get the software installed.

• The following error occurred while importing IMG_ #. JPG: The system cannot find the specified file.

  It really starts to annoy me. For some reason, Windows does not allow me to import my photos with Windows more, I was able to import pictures all the time, but all of a sudden it stopped. I tried the import with the program auto-importation of Windows and then I tried to use the import software called Windows Live Gallery. Both gave me the same error message "the following error occurred while importing IMG_ #.» JPG: The system cannot find the specified file. "I tried looking up this error on many sites and have not led to what. I tried to re-formating my memory card but it did not work. Please help me, I can not import all the images and is running out of memory cards, I don't want to delete the images I took because I can not import to my computer.

  Thank you.

  Hello
   
  1. you try to import these images on the camera?
  2. have you checked if the image files are present on the device?
   
  First cross check if the photos are present on the device and if you are importing from the right location. Try to copy the files manually and paste it on the desktop and see if it works.
   
  For more information on troubleshooting camera connection problems, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems
   
  Post back with the results, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ < LANG_NAME > \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The MCSTRM service failed to start due to the following error: the system cannot find the specified file

  My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

  What can I do?  I have Vista SP2 64-bit.

  I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

  Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

  Thank you

  Candy C:\Users\David> net helpmsg 2

  The system cannot find the specified file.

  Is that error on this post code, IE something deleted, probably your antivirus or you.

  For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll

  
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   
  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
   
  You will need to disconnect then.
   
   

  New entry missing folder

   

  If the above does not help.

   

  Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.

   

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
    

• Error "the system cannot find the specified file. (0 x 8007002)"when you try to bacup on external hard drive.

  original title: the backup help.  I can't run a backup.  Windows Vista 64-bit.  Get the error "the system cannot find the specified file. (0 x 8007002) ideas?

  My last successful backup has been 12/12/2010!    I am backup on an external hard drive.  I installed the KB947821 hotfix successfully, but the backup still does not work.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/0e0af440-1da6-4fe4-8B44-872078ec4911

  I'll go through this link try others did for the resolution measures

• "An error has occurred applying security information to:...". The system cannot find the specified file. »

  So, this is what happened:

  I accidentally threw my wife laptop screen and I bought her a new. The laptop seems to be OK, but I couldn't see anything because of the broken screen.
  I bought a pen, took out the old HDD (Vista) and connect it to the speaker.
  Now I'm going through old files from my wife from the old HDD (Vista) on his new laptop (Win 7), but I can't access it.
  So I did a little web browsing and tried the following.
  Logged as administrator, open properties, Security tab, advanced, button tab owner, edit, changed ownership to myself (my wife) and verified replace the owner in the box of submarines.
  And then find a lot of mistakes. Everyone says ' an error has occurred applying security information to:
  Among these errors, half of 'em had "the system cannot find the file specified" and the other half had "access denied."
  In the end, there is a separate error that says: "unable to set new owner (folder). The system cannot find the specified file. »
  I would really appreciate the help.

  Hello

  Did you change your computer?

  I suggest that you first take ownership of the drive once you connect to the computer and check if it works.

  To take ownership of a folder

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and then click the owner tab.

  (c) click on edit. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) click on the name of the person you want to give to the property.

  (e) If you want that person to be the owner of the files and subfolders in this folder, select the check box replace the owner of sub containers and objects .

  (f) click OK.

  I suggest you follow the links and check out them.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Error message when you change the security settings for a folder that contains a child object for which you have no access authorization: 'access denied '.

  http://support.Microsoft.com/kb/975702

• When you connect on Vista, get message of the system cannot find the specified file

  the above is displayed. whenever I connect. I can do everything works, that's when I hit print, save appears and the file has been converted to a tiff file.  None of the office products will be printed.  I have the office 7 wiuth Vista 32 OS.  I went throgh HP, but there seems to be a problem in office

  * original title - MOM.implementation, Version = 2.0.3182.4658, Culture = neutral, publickeytoken = 90ba9c70f84672e' or one of its depenencies.  The system cannot find the specified file *.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Ho can solve the error, "the system cannot find the specified file. (0 x 80070002) » ?

  There can someone offer advice, IN PLAIN ENGLISH, SPEAK NO TECHsolve the error "the system cannot find the specified file. (0 x 80070002) "I get when I try to back up my computer using an external hard drive. I tried to update the software of the external hard drive, cleaning the registry, send emails to tech support and the curse / gnashing of teeth. Windows is supposed to make it easy to save with a single click, but it seems to be impossible! I looked for solutions on the net, but if I knew what the heck was a hex code, I wouldn't need to ask this question. Help please!

  Hello

  This is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file. I use ipconfig /renew6.

  Hi all

  I use version 2.1 of WINPE. It works with ipv4 network services.

  I have a "Windows2008R2" machine in my network. In this server I am running a DHCPv6 server in my network. This server is the allocation of IPv6 addresses to all computers that have the OS Vista and Win7, etc (for vista and above).

  But I'm not able to receive the ipv6 address for winpe2.1 pc which is my test pc.

  What are the basic things I should do to receive the IPv6 ip address.

  If you please suggest me that how I can solve this problem.

  I tried to have run the command as "ipconfig /renew6" but he throwed an error

  An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file.

  It is very urgent for me. I ask if anyone knows the steps so that the WINPE2.1 system get IPV6 will be appreciated.

  Thank you very much.

  Andy

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  They will help you in the community of Windows Server above with your questions.

  See you soon.

  Mick Murphy - Microsoft partner

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian