Workstation for the production
Hi all
You could erase me a question?
Can I use my Server 2008 virtual Workstation and use this server as my production in real time?
Thank you
Yes, this is certainly possible, and it's one of the reasons why VMware Workstation provides the option shared Virtual Machines (see VMware KB: running VMware Workstation as a server with shared virtual machines).
André
Tags: VMware
Similar Questions
-
activation key for the product during the victory 8.1 update
I use HP ENVY m6 recently the hard drive had crashed. so I ordered for a recovery of hp and I put it and win8 installed. When I switch to 8.1 it ask for the product key. It shows that "this product key isn't not work.you might need to contact the store or company, that you have purchased from windows or you can buy a new key from microsoft"
Hi @kalyanCN ,
Welcome to the HP Forums!
It is a wonderful place to find answers and ideas!
You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more
I understand that your hard drive has crashed and you have ordered a recovery kit. You did the recovery of Windows 8 and have now updated for Windows 8.1 but have a problem with activation. Here is a link to Activate Product Windows 8 to help you solve this problem.
If you still encounter a problem with the activation, I suggest that you contact HP support for help.
Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.
Good luck!
-
I get a pop up saying error 1706 that valid no source is not found for the product my hub. Windows install cannot continue. Also "the feature you are trying to use is on a nework resourse which is not available."
Can someone tell me what to do and what is the problem
Thank you
Hi Traceyjane,
(1) when exactly it happens?
(2) do you use the computer as an administrator?
(3) what is the number of brand and model of your terminal?
If you try to install the software for your hub, make sure that you install the correct package for your computer.
Step 1: Try to install the program as administrator right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.
Just check the items below that addresses a similar issue
The feature you are trying to use is on an unavailable network resource
http://support.Microsoft.com/kb/828376You receive an "error 1706. Valid any source not found for the product
http://support.Microsoft.com/kb/253768
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product. Do the thing anytime upgrade and after a wait I am informed upgrade failed, what should I do?
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
walking from Vista to 7 system keeps asking for the product key
Related topics
-
I bought my program and I have the code for the product. Where I have to write this code?
Exactly, what program... and the version?
You have a number or a redemption code?
You enter a serial number when asked during the installation process
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-
new fake serial for the product key in order to activate the non-visible product
The starting point, it's that I want to install Acrobat 7.0 Standard (which, so far, works well in Win7 XP box) on my new Win10-Sytem.
Installing from the CD worked - and (surprise) it is works on Win 10!
But: I can not activate it with the original serial number.
So: earlier I had this discussion (which is now closed...):
I want to inform that the key to this series is for Acrobat 7 and Adobe no longer support this product so in order to help you I provided a link so please click on this link:Download Adobe Acrobat 7 and Adobe Creative Suite 2 products
Then sign in to your Adobe account, then you must select your product form there and also you will find the new dummy series for the product key in order to activate the product, please, do not use your product serial key
Well: the download of the installation file has worked, but I can't find the new dummy series for the product key in order to activate the product in my account. Again there is the OLD and no keys work.
So, please: where can I find the fake serial key?
You are welcome
-
I paid for the product, but it is still a demo! And I've paid twice!
I paid for the product, but it is still a demo! And I've paid twice!
[moderate]
-
My creative cloud subscription ran out. I've updated my contact information. Adobe is deducted from the money, but I can't find the serial number in my account for the product so can't get all running programs. I have the small card, but there are letters and numbers. Adobe doesn't let me put those in the fields of serial number. Is it possible I can get Adobe to help me because I'm paying for something that I can't use.
Hello
Please check the help below document:
Quickly find your serial number
In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts
Kind regards
Sheena
-
I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10. I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium. What should I do to get loaded and enabled on my computer?
That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.
Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html
-
I downloaded Lightroom 6 thanks to Amazon and never received an email from Adobe with the serial number, I need to finish my license/registration for the product...where/how can I get the serial number?
Hello dakineny,
Please refer to the link given to find your serial number: quickly find your serial number
It will be useful.
Concerning
Bianka Attre
-
Canonical URL for the product?
What is the best way to manage the canonical URL for the products?
The easiest way would be to use a template to be applied to these pages, but what module/tags should I use for a template that renders the URL?
Thank you!
Lynda
Wait, as BC is working on the feature and hopefully coming out soon.
If you can't wait then use custom field and the canonical tag in the presentation of the great product and manually paste the url in the url you want as primary.
-
I paid for the product, but I don't have a serial number
I paid for the product, but I don't have a serial number. What should I do?
Hi Lynnslf38,
Please see the help document following on "how to find the serial number of product purchased Adobe."
http://helpx.Adobe.com/x-productkb/global/find-serial-number.html
I hope this helps.
Please let me know if you have any other questions.
Kind regards
Sumit Singh
-
Help with settings in the capture of a 1968 for the Production of DVD movie
I have a problem with the Premier Pro and need help.
I'm on a date limit to change a feature film (01:27 long). It's a job home with, unfortunately, not a lot of knowledge on Premiere Pro. It must be sent in MPEG2-DVD (which I don't know how to do). My problem in the import of DV cassettes. I know how capture of the Sharp VL - AX1 I use to read the tapes. He appeared in Premiere Pro, etc.
My problem is with the settings. I set up the Premiere Pro with Standard DV NTSC 48 kHz, and then click capture. While the small screen on the Sharp VL - AX1 shows scenes with just a small black band (1/2 inch?) on the top and the bottom of the actual scene, the import/capture on the PC screen appears on a screen wide once he starts the capture and everything is elongated horizontally. I tried variations for the last month, but I'm stuck right here. The film was shot in 1968 and is wider; wide screen just not. When I try the implementation of big screen, the capture on the PC screen is just as broad if not broader.The film has been digitized from the original 35mm copy by a professional company in Texas. I'm just trying to correct some color problems and send it to them for the production of DVD. They use Avid, so they cannot make the same color of correction, etc., work I want to do.
I would like to import from DV tapes in the best possible quality, tweak it a bit and then export it to a (probably mpeg2-DVD) format, which they can use to make the additional editing (DVD menus, etc.) for the production.
Here is a picture of what appears on the screen of the Sharp VL - AX1
Here is a picture of what appears on the screen Capture in Premiere Pro (CS5)
For any help or suggestion will be appreciated. I have this project done Friday.George
The telecine like a 4:3 letterbox wasdone: that's why you see black bars in the capture window. However, the transfer to the band (or perhaps the capture of original sequences by the transfer device) has reported that 16:9; First recognizes that flag, and that is why the video is stretched in the capture window. Since it's DV, it is not really important. Just capture it as - is and then right click on the AVI file captured, select Modify > interpret footage and all the pixels to Conform to D1/DV NTSC format (. 9091). He will perform the 4:3 images, and the aspect ratio is correct. There will be bars from mailbox to mailbox, but those who are already in the images. You can get rid of them, but you'd have to blow up the images and lose resolution, then I'd say just leave as is.
Once you have done so, just drop it into a sequence of NTSC DV (not widescreen) and change there. From there, you can export some way that you see fit. MPEG-2 DVD is fine as long as the other company is just doing the DVD authoring, but if they do no editing more far, you probably want to just export to tape to maintain the highest quality.
-
Satellite L300 - Microsoft Office ask again me for the product key
Hi I have a Satellite L300 and there Windows Vista. When I use Office at home thing he always asking me for a product key.
I put it in but he falis to recognize? Why? He says that I don't have 18 going to the left. I can no longer access the processor then? If its pre-installed but why it ask me the number?
In any case it took me forever to get herre to write this. Why cantToshiba have just a simple e-mail response to the queries of customers service! I bought it in August last year and this is the first time that I need help, but you would have thought that they would have made it easier to the needs of customers!
Thank you.
Hello
> Home Office thing
Nice description ;)In any case, I think you mean the version of Microsoft Office that is preinstalled on your laptop. As far as I know that s only a trial version of it and that means you need to buy a version of office if you want to continue using it.
If you n t buy a version of desktop, you can t more use it.
Finally, and especially if you have several problems, you should contact a Toshiba instead authorized service provider directly.
Maybe you are looking for
-
This was happening on Windows 8.1, just until I upgraded. There are so many updates happening that I don't know what could have triggered this. I think I had just updated Flash and I see some comments on this. I tried the beta version of Firefox with
-
You can add other emoticons to those found in the IOS 9.2 emoji keyboard
I would like to add emoticons to brighten up my calendar and others. While the emoji on iOS 9.2 keyboard has a lot of emoticons, I can't find some like the rod of Asclepius for medical appointments, not an image of a tooth for the dentist or a grocer
-
Laptop HP Pavillion 15-n003T: WiFi adapter does not
My wifi has suddenly been turned off and now it does not. When I troubleshoot it shows an error "there could be a problem with the driver for the wireless adapter. Windows could not automatically bind the Protocol IP on the network card stack. »Help,
-
I can't disable the touchpad mouse. I uncheck 'enable' and click on 'apply' tab UltraNav. The touchpad still works, even after a reboot, and I see that the touchpad mouse shows active. What can I do? Thank you Philippe
-
Can I replace the broken legs?
I have a microsoft 1 keyboard. 0 and one of the flip legs is broken. Can I get a replacement?