Workstation suitable?

This configuration would be not good for a Canon T2i HD video editing?

-Phenom ii x 6 1090 t.

-L'asus Crosshair iv Formula

-G.skill Ripjaw series 4 GB (updated 8GB in the future once I can afford...)

-WD Veliciraptor 150 GB 10000 rpm for the operating system and applications

-2 x WD 320 GB in RAID 0 and everything else (I think, this RAID stuff is very confusing, once I've finished writing this, I intend to do more research on the RAID, but any advice is welcome :))

-GeForce 9800 GTX + 512 MB

-750w psu

It will be able to run programs of CS5 Production Premium smooth? It doesn't have to be blazing fast, good video editing now is really just a hobby since I was still in high school, but I intend to pursue a career in the film industry in my future. Also, I have a budget of about $1,700, I try to not spend more and more all the remains (blu - ray, os, monitor, case, etc.) comes to $1833 more transport ($1785 without) but any suggestions are welcome. In addition, one last question, the GPU will be enough? On the requirements page, he has this (very small) list of compatible GPUS and it is not very clear at all, but I think I saw where someone said that even a $30 GPU will be OK...

Today was my first contact with the results of a system of hexacore dual Opteron (total 12 cores) and IMHO results were disappointing. Of course, there are several differences in discs and the video card configuration, but in comparison with an i7 - 9xx system, it was really disappointing side MPE and the rest was also significantly slower than i7 systems. In about two weeks, you can see these results when PPBM CS5 can appear.

What I mean is that AMD is not the processor of choice.

You can never have enough memory. According to the mobo, 6 or 8 GB is about less convenient, but there is a significant profit to move to 12 or 16 GB. The old rule that just use a $30 card, is no longer true with CS5. MPE provides gains enormous, but at a price.

If you go to the 'Panorama' tab at the top of the page, a drop-down list appears with the items that may be worth reading, one of them on the rules of storage and another on Raids. Take a look.

Tags: Premiere

Similar Questions

  • "Radeon HD 6850" suitable for HP xw4600 workstation?

    Hello

    I need to upgrade graphics card for my old HP xw4600 workstation

    Currently, I have a GIGABYTE Geforce GTS 250 installed. I plan to go to GIGABYTE Radeon HD 6850 1 GB GDDR5 PCI - E

    question:
    My motherboard will support this card?

    I can except a radical change? is - it right for this machine run the eficiently?

    Info sys:

    Processor: Intel (r) Core (TM) 2 Duo CPU E8400 @ 3 .00GHz (2 CPUs), ~3.0GHz
    Memory: RAM 8192MB

    pauzak wrote:

    Hello

    I need to upgrade graphics card for my old HP xw4600 workstation

    Currently, I have a GIGABYTE Geforce GTS 250 installed. I plan to go to GIGABYTE Radeon HD 6850 1 GB GDDR5 PCI - E

    question:
    My motherboard will support this card? Yes

    I can except a radical change? is - it right for this machine run the eficiently? The problem you will encounter is your current diet or not has a 6-pin PCI-Express video card connectors. Two PCI-e power connectors 6 pins are required for this video card. 

    Sometimes I have this card in this desktop PC. Large map. It runs any current game on the market.

    Info sys:

    Processor: Intel (r) Core (TM) 2 Duo CPU E8400 @ 3 .00GHz (2 CPUs), ~3.0GHz
    Memory: RAM 8192MB

  • HP Z600 workstation: HDD WORK HP Z600 workstation

    Hello

    This will probably sound funny to you guys, but please help.

    1. can I add a HDD ATA to the HP Z600 workstation?

    2 If this is not the case, can the HARD SATA 3 drive, or should it be less?

    Thank you

    You cannot add an ATA hard drive (aka PATA EIDE) directly as the z600 has no port EIDE. PATA is dead and has been for many years, and you certainly don't want to use a hard drive EIDE both old and slow, which now is probably very close to the end of its useful life as a hard drive permanently in the z600.

    However, if it is just to copy through the data of the old EIDE disk on a storage medium more recent then there are ways to do. We need to connect the old hard drive via an EIDE to SATA adapter to one of the internal SATA ports. However, a less cumbersome alternative is an external PATA-USB adapter or a hard drive enclosure external PATA with USB port, which can be found pretty cheap these days.

    As for SATA3 (aka SATA 6 GB/s), the z600 SATA ports are limited to SATA2 (aka SATA 3Gbps), however SATA3 is backward compatible, so you can use a disk/SSD SATA3 in the z600, but obviously performance will be limited to SATA2 (i.e. of speeds<300MBps). if="" you="" want="" full="" sata3="" performance="" (i.e.="" for="" an="" ssd)="" then="" get="" a="" suitable="" disk="" controller="" (i="" use="" an="" adaptec="" 6805="" raid="" controller="" with="" samsung="" ssds="" in="" ours;="" another="" alternative="" is="" the="" lsi="" megaraid="">

    I hope this helps!

  • VMware Workstation 12.1.1 Pro is unable to install the network grows on CentOS 6.8 host

    Just upgraded my 6.7 CentOS Server (where the VMware Workstation 12.1.1 worked fine) to 6.8.

    After a reboot, VMware has done, it is usual thing where she wanted to reinstall its readers. He doesn't have to install the network component. Here are my logs:

    2016-05-28T18:21:09.477-07:00| vthread-4| I125: Log for VMware Workstation pid=27658 version=12.1.1 build=build-3770994 option=Release
2016-05-28T18:21:09.477-07:00| vthread-4| I125: The process is 64-bit.
2016-05-28T18:21:09.477-07:00| vthread-4| I125: Host codepage=UTF-8 encoding=UTF-8
2016-05-28T18:21:09.477-07:00| vthread-4| I125: Host is Linux 2.6.32-642.el6.x86_64 CentOS release 6.8 (Final)
2016-05-28T18:21:09.476-07:00| vthread-4| I125: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2016-05-28T18:21:09.476-07:00| vthread-4| I125: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2016-05-28T18:21:09.476-07:00| vthread-4| I125: DictionaryLoad: Cannot open file "/home/sa_schewee/.vmware/config": No such file or directory.
2016-05-28T18:21:09.476-07:00| vthread-4| I125: PREF Optional preferences file not found at /home/sa_schewee/.vmware/config. Using default values.
2016-05-28T18:21:09.501-07:00| vthread-4| W115: Logging to /tmp/vmware-root/vmware-27658.log
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Obtaining info using the running kernel.
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Created new pathsHash.
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.511-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.518-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.518-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.587-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
2016-05-28T18:21:09.587-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Read 12201 symbol versions
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmmon module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmnet module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmblock module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmci module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vsock module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Setting vsock to depend on vmci.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Invoking modinfo on "vmmon".
2016-05-28T18:21:09.600-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
2016-05-28T18:21:09.600-07:00| vthread-4| I125: Invoking modinfo on "vmnet".
2016-05-28T18:21:09.601-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 256.
2016-05-28T18:21:09.601-07:00| vthread-4| I125: Invoking modinfo on "vmblock".
2016-05-28T18:21:09.603-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
2016-05-28T18:21:09.603-07:00| vthread-4| I125: Invoking modinfo on "vmci".
2016-05-28T18:21:09.605-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
2016-05-28T18:21:09.605-07:00| vthread-4| I125: Invoking modinfo on "vsock".
2016-05-28T18:21:09.607-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
2016-05-28T18:21:09.618-07:00| vthread-4| I125: to be installed: vmnet status: 0
2016-05-28T18:21:09.624-07:00| vthread-4| I125: Obtaining info using the running kernel.
2016-05-28T18:21:09.624-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
2016-05-28T18:21:09.624-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.624-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.624-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.632-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.632-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.701-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
2016-05-28T18:21:09.702-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Read 12201 symbol versions
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Kernel header path retrieved from FileEntry: /lib/modules/2.6.32-642.el6.x86_64/build/include
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Update kernel header path to /lib/modules/2.6.32-642.el6.x86_64/build/include
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.711-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.719-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.719-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.720-07:00| vthread-4| I125: Found compiler at "/usr/bin/gcc"
2016-05-28T18:21:09.724-07:00| vthread-4| I125: Got gcc version "4.4.7".
2016-05-28T18:21:09.724-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
2016-05-28T18:21:09.724-07:00| vthread-4| I125: Using user supplied compiler "/usr/bin/gcc".
2016-05-28T18:21:09.727-07:00| vthread-4| I125: Got gcc version "4.4.7".
2016-05-28T18:21:09.727-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
2016-05-28T18:21:09.729-07:00| vthread-4| I125: Trying to find a suitable PBM set for kernel "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.729-07:00| vthread-4| I125: No matching PBM set was found for kernel "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.729-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
2016-05-28T18:21:09.729-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.729-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.729-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.737-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.737-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.738-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
2016-05-28T18:21:09.738-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.738-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.738-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.746-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.746-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.746-07:00| vthread-4| I125: Using temp dir "/tmp".
2016-05-28T18:21:09.747-07:00| vthread-4| I125: Obtaining info using the running kernel.
2016-05-28T18:21:09.747-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
2016-05-28T18:21:09.747-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.747-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.747-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.755-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.755-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.825-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
2016-05-28T18:21:09.825-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
2016-05-28T18:21:09.834-07:00| vthread-4| I125: Read 12201 symbol versions
2016-05-28T18:21:09.834-07:00| vthread-4| I125: Invoking modinfo on "vmnet".
2016-05-28T18:21:09.836-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 256.
2016-05-28T18:21:10.081-07:00| vthread-4| I125: Setting destination path for vmnet to "/lib/modules/2.6.32-642.el6.x86_64/misc/vmnet.ko".
2016-05-28T18:21:10.081-07:00| vthread-4| I125: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2016-05-28T18:21:10.087-07:00| vthread-4| I125: Successfully extracted the vmnet source.
2016-05-28T18:21:10.087-07:00| vthread-4| I125: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-tH7bci/vmnet-only auto-build HEADER_DIR=/lib/modules/2.6.32-642.el6.x86_64/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2016-05-28T18:21:11.063-07:00| vthread-4| W115: Failed to build vmnet.  Failed to execute the build command.

    Hi, I faced the same problem, and now I have corrected this issue.

    He was vmnet.ko, at least for me.

    Here's how to solve,

    You can find the latest vmnet.ko of /lib/modules/~previous_kernel_version~/misc/vmnet.ko

    Copy vmnet.ko into your current/lib/modules/your_current_version/misc folder.

    And then run vmware, if you fail at the first, please run again.

    If so, you can run vmwre!

    I hope this will help you.

    Good day.

  • Ubuntu 14.04LTS Server / VMWare Workstation 10

    Ubuntu server v. 14.04 appears only to be published in a 64-bit version. Previous versions have been released in a 32-bit version, which are installable Desktop 10. I have the latest version of workstation 10, but it will not install the 64-bit version of ubuntu server 14.04, give a message that says "this kernel requires an x 86-64 processor, but only detected an i686 CPU." Failed to start. Please use a kernel suitable for your CPU. I'm under workstation on Win7 with a processor Core I7. Anyone can point me to a solution the installation procedure or workaround, or will I have to wait for Ubuntu or VMWare provide updates? Thank you.

    Ubuntu server v. 14.04 only seems to be released in a 64-bit version

    This is not true, as it is available in 32-bit and 64-bit versions.

    http://releases.Ubuntu.com/14.04/Ubuntu-14.04-server-i386.ISO

    http://releases.Ubuntu.com/14.04/Ubuntu-14.04-server-amd64.ISO

  • VMware Workstation 8.0.3 and 16 Fedora (linux x86_64 3.3.6)

    All,

    Have a moment difficult installation of VMware wkstn 8.0.3 on my 64-bit kernel to run Fedora16 3.3.6. It seems only vmnet fails however, as all other versions seem to complete successfully:

    2012-05-25 T 08: 08:48.717 - 06:00 | vthread-3 | I120: Building module vmnet.
    2012-05-25 T 08: 08:48.717 - 06:00 | vthread-3 | I120: Extract the module vmnet sources.
    2012-05-25 T 08: 08:48.733 - 06:00 | vthread-3 | I120: Module construction with the command: / usr/bin/make-j - C/tmp/vmware-root/modules/vmnet-only self-build SUPPORT_SMP = 1 HEADER_DIR=/lib/modules/3.3.6-3.fc16.x86_64/build/include CC = / usr/bin/gcc = GREP / usr/bin/make IS_GCC_3 = no VMCCVER = 4.6.3
    2012-05-25 T 08: 08:50.344 - 06:00 | vthread-3 | I120: Unable to compile the module vmnet
    !
    2012-05-25 T 08: 08:50.351 - 06:00 | vthread-3 | I120: Try to find a PBM suitable for 3.3.6 - 3.fc16.x86_64 kernel.
    2012-05-25 T 08: 08:50.351 - 06:00 | vthread-3 | I120: Validation of path /lib/modules/3.3.6-3.fc16.x86_64/build/include for 3.3.6 - kernel version 3.fc16.x86_64
    2012-05-25 T 08: 08:50.355 - 06:00 | vthread-3 | I120: Your GCC version: 4.6
    2012-05-25 T 08: 08:50.369 - 06:00 | vthread-3 | I120: Your GCC version: 4.6
    2012-05-25 T 08: 08:50.399 - 06:00 | vthread-3 | I120: Header path /lib/modules/3.3.6-3.fc16.x86_64/build/include for 3.3.6 - 3.fc16.x86_64 kernel version is valid.
    and
    make: entering directory ' / tmp/vmware-root/modules/vmnet-only»
    do /lib/modules/3.3.6-3.fc16.x86_64/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD.
    . \
    MODULEBUILDDIR = modules
    make [1]: Entering directory ' / usr/src/kernels/3.3.6-3.fc16.x86_64'
    CC [M] /tmp/vmware-root/modules/vmnet-only/userif.o
    CC [M] /tmp/vmware-root/modules/vmnet-only/netif.o
    CC [M] /tmp/vmware-root/modules/vmnet-only/filter.o
    /tmp/vmware-root/modules/vmnet-only/filter.c:60:16: error: 'THIS_MODULE' undeclared here (not in operation)
    make [2]: * [/ tmp/vmware-root/modules/vmnet-only/filter.o] error 1
    make [2]: * waiting unfinished...
    /tmp/vmware-root/modules/vmnet-only/userif.c: in function 'VNetCsumCopyDatagram ':
    /tmp/vmware-root/modules/vmnet-only/userif.c:520:3: error: incompatible type for argument 1 of 'kmap ".
    include/Linux/highmem.h:48:21: Note: expected ' struct page *' but argument is of type '< anonymous > const struct.
    /tmp/vmware-root/modules/vmnet-only/userif.c:523:3: error: incompatible type for argument 1 of «kunmap»
    include/Linux/highmem.h:54:20: Note: expected ' struct page *' but argument is of type '< anonymous > const struct.
    /tmp/vmware-root/modules/vmnet-only/Netif.c: in function 'VNetNetIfSetup ':
    /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: error: unknown field "ndo_set_multicast_list" specified in the initializer
    /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: warning: initialization of the [default] incompatible pointer type
    /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: WARNING: (near initialization for 'vnetNetifOps.ndo_validate_addr') [default]
    make [2]: * [/ tmp/vmware-root/modules/vmnet-only/userif.o] error 1
    make [2]: * [/ tmp/vmware-root/modules/vmnet-only/netif.o] error 1
    make [1]: * 2 error [_module_/tmp/vmware-root/modules/vmnet-only]
    make [1]: leaving directory ' / usr/src/kernels/3.3.6-3.fc16.x86_64'
    make: * [vmnet.ko] error 2
    make: leaving directory ' / tmp/vmware-root/modules/vmnet-only.
    Everyone knows the same thing and know how it could be improved? Thanks in advance!

    http://darusintegration.blogspot.ca/2012/05/workstation-803-on-Linux.html

    This has been reported on several occasions, but this is my blog on the subject...  (I used Kubuntu 12.04 x 64)

    C

  • How to configure the server Esxi 3.5 on Vmware workstation 7

    Hello

    I m new technology Vmware Esxi. I will join the formation of VCP5 next month. But before participating in this training, I would take it somewhere on the same experience. So, for this, I install Vmware workstation 7 on my home PC. I have install Esxi 3.5 server on one machine virtual workstation.

    I just edit the machine configuration file virtual vmware [C:\Documents and Settings\a48923\My Documents\My Machines\Esxi virtual-01] as shown below which is marked in "BOLD" letter.

    scsi0. Present = 'TRUE '.
    scsi0.virtualDev = "free".
    memsize = "1024".
    scsi0:0. Present = 'TRUE '.
    scsi0:0. FileName = 'Esxi - 01.vmdk.
    IDE1:0. Present = 'TRUE '.
    IDE1:0. AutoDetect = 'TRUE '.
    IDE1:0. DeviceType = "cdrom-raw"
    floppy0.startConnected = "FALSE".
    floppy0. FileName = "".
    floppy0. AutoDetect = 'TRUE '.
    ethernet0. Present = 'TRUE '.

    ethernet0.virtualDev = "vlance.
    ethernet0. ConnectionType = "bridge".

    monitor_control.restrict_backdoor = TRUE
    monitor_control.vt32 = TRUE
    Monitor.virtual_exec = "automatic".

    ethernet0.wakeOnPcktRcv = "FALSE".
    ethernet0. AddressType = 'generated '.
    roamingVM.exitBehavior = 'go '.
    displayName = "Esxi-01.
    guestOS = "redhat".
    NVRAM = "Esxi - 01.nvram.
    virtualHW.productCompatibility = "esx".
    extendedConfigFile = 'Esxi - 01.vmxf.
    ethernet0.generatedAddress = "00: 0C: 29:32:f8:b3.
    UUID. Location = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
    UUID. BIOS = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
    cleanShutdown = 'TRUE '.
    Replay.Supported = 'TRUE '.
    Replay.FileName = «»
    scsi0:0. Redo = «»
    vmotion.checkpointFBSize = "16777216.
    ethernet0.generatedAddressOffset = '0 '.
    tools.remindInstall = 'TRUE '.
    ethernet0.linkStatePropagation.enable = "FALSE".
    tools.syncTime = "FALSE".
    ethernet0.VNET = "VMnet8.

    After you change the configuration file. I started the Esxi server. But when booting, it shows lmdriver failed to load. When I tried to configure the Exsi network, the back always prompt to reset the default settings of the network. Then I searched the internet, I found this machine NIC not to support Esxi. Is there a way to configure the Microsoft loop back adopter or any virtual adopter for esxi? So that I can install several esxi server on a single machine on vmware workstation and can be communicate with each other.

    With VMware Workstation 7 you should not need to manually configure the .vmx file. Create a new custom virtual machine and select ESX as the guest operating system. This will configure the virtual material suitable as an E1000 network adapter...

    André

  • You can move THAT VM created in workstation to ESXi

    Is it possible to move the virtual machine created in the workstation product the product free ESXi?

    You can use VMware vCenter Converter Standalone to convert the virtual machine, so it is suitable for ESXi.

  • Installing TB31.3.0 on a W8.1 workstation; I want to delete the messages on the user agent of TB, but prevent deletion on the server. Where is the switch? When to install

    Hello!

    I have already installed a TB user agent on my workstation 'primary': I can create, read, and DELETE messages ON the workstation and the server.
    I want now to install a user of TB on a "secondary" workstation agent, where I can create, read and DELETE messages on the workstation. But I don't want the secondary workstation to delete messages on the server. (In short: I want that the function "delete" ONLY allowed to my primary workstation).
    Is this possible? Where is the switch ON / OFF? (For example, this feature is available on the agent on my WindowsPhone).
    When I install it?

    Thanks for your support!
    Rgds
    Flamboyant

    Using Thunderbird on your second workstation - the only option would be to create a Pop email account
    so before you download anything, you must configure the account settings to "leave a copy on the server.

    Tools > account settings > account for Pop mail server settings.
    or
    Menu icon > Options > account settings > server settings

    • Letter: look for the e-news at startup
    • Letter: arrival of new messages every xx minutes
    • Select: automatically download new messages
    • Letter: Leave messages on the server '
    • Click OK

    E-mail POP accounts can only download the mail from the Inbox server.
    This will allow you to remove off the coast of the secondary workstation and leave it on the server.
    However, Pop cannot see or download other folders on the server: IMAP only can see other folders these are read remotely. But in IMAP because records are a same as server, removing in TB will remove also off server.

  • After the Server 5.1.5 upgrade network user cannot connect by most workstations

    Hi all

    Intro

    I upgraded one of my client of 10.6.8 Xserve server at El Capitan / app 5.1.5 server.

    The server is configured with the network homefolders and mobile homefolders. We also use PCS. The 10.6.8 configuration has worked perfectly and still doesn't work. But now it is time to move on.

    The upgrade process from was relatively smooth. I had to configure the interface network again, then check DNS (front / back) and I also had to re - install the SharePoint, including network sharepoint (via AFP) houses.

    Problem:

    Then, I started to test the connection as users of the network on client computers. I found that it was not possible to connect from most client computers.

    After entering the login credentials was refused immediately. As is the case when entering the incorrect credentials.

    On client computers, nothing has changed.

    Client computers running Yosemite 10.10.5 and some are running 10.6.8

    As soon as I reboot the Xserve 10.6.8 original that's all is back to normal.

    What does not work:

    Those who connect has worked well:

    • Mobile sync (on Unassigned Computers)

    • Log is as user network at home (on Unassigned Computers)

    • PCS worked fine. New settings have been made correctly. On all computers.

    • Automatically install some actions has worked well on all computers. It is a local administrator on the client computers. When connecting to the account, the network shares are mounted using PCS.

    • Resolution of the DNS of all client computers

    • DHCP works OK

    • Client computers running 10.6.8 seem to be not affected.

    At one point one of the workstations involved that did not work, started working.

    What I tried and not solve the problem:

    • Renew DHCP client

    • Removed liaison OD and put in place again

    • Trashed records managed preferences (these have been re-created correctly)

    Ideas on possible causes:

    The most logical causes of this behavior might be:

    (1) client computer cannot find the master OD.

    (2) the powers of negotiation fails.

    Since the Division of the OPPOSITION binding work, works PCS etc., the client computer is the master of the OD.

    The latter seems the cause more lickely. Ticketviewer does not show tickets. Ticketviewer by using the credentials of a user of OD manually requesting a TGT works very well.

    All advice is appreciated.

    Kind regards

    Nico

    Hi Nico,

    Maybe the problem is related to the AFP. Have you tried disabling AFP in Systempreferences and delete all shares. After this restart AFP and try to add shares again. Have a look at the access privileges. It is urgent to remove and re-add the userfolders on the server share.

    Good luck

    Peter.

  • This Bohemian Macbook 13 inch sleeve suitable for my new Macbook?

    This Bohemian Macbook 13 inch sleeve suitable for my new Macbook?

    She will be sure the sleeve quite rightly if I put in place with the adapter mouse and laptop computer?

    I've been successfully applied a particular code to order a $3.99 one:

    days of http://www.inateck.com/Flash-Deals/Mother.

    I am hesitant to buy this deal right now.

    If it were me, I would never buy a cover for my new Mac without trying in person in a store. You want to make sure that the vents on the Mac be covered so it won't overheat.

    If you can, go to an Apple Store and buy a he.

    Promos for a new Mac? You have reason to hesitate. Considering the cost of a new Mac, probably not a good idea.

  • Clocked at 20 degrees warmer since putting on 3.87 Rev A Bios Update on Z420 Workstation

    I have a question:

    Not too long ago I put the Bios Update on A Rev 3.87 was considered to be as critical an update on my workstation Z420 (running Windows 7 Pro 64-bit), and lately I've found that the CPU idling at about 20 degrees more hot than before.  I used to hear creaking noises coming from the computer I learned normally come circuits on the motherboard power delivery, but as long as I heard those CPU would be on average around 50 degrees C at idle.  I hear these noises and now the CPU is on average around 70-75 degrees C at idle.  Not sure what the connection is.  HP performance Advisor tells me I'm in the normal range, but I want to just make sure that with programs like Autodesk Maya there, she become too hot and stop the machine.   I don't know what the temp high-end is considered maximum security.  This change could have due to the update of the Bios?

    Thank you for your response and suggestions.  I check in my BIOS power management settings has been developed the extended mode, but the temperature has always hovered around 70-78 degrees at idle.  I checked Intel spec for this (E5 - 1650 6-core xeon) processor, clocked at 3.2 Ghz by heart, and although he said nothing on the TMax, he mentioned that the TCase (which he defined as the maximum temperature allowed integrated processor heat sink (IHS)) was 64 degrees Celsius.  Now my temperature of the case, according to my HP Performance Advisor version 1.7.7517.0 is only about 24 degrees C, but I put my fan a little higher CPU, about 2009 rpm speed.  This makes a little more noise, but my CPU temp has dropped to about 49 °.  "" Before the change of the fan speed has been slightly more than 1300 RPM while the Advisor I have always said that it is in the range "normal".  Is it good to get the speed of the CPU fan like that or do I have to go a little lower?

    James Holman

  • HP Z620: Z620 Workstation - Bios Rev 3.88 A Fn buttons does not!

    Hello

    I recently got a strange problem with the Bios on my workstation HP620.

    Keyboard is "Microsoft 4000 ergonomic keyboard".

    Although the F5 / F10 keys normally work in Windows 10, they no longer work in the system Bios.

    means I can't save the changes that I'm doing here. I can spend all the options, from disabled to enabled for example,.

    but as I need to hit F5 or F10 to make/save the changes, and not works keys Fn, I can't change anything in the Bios now.

    What could be?

    Reason may not be the Version of the Bios or the keyboard, as I already brought it changes a few months ago.

    Thanks for any help

    Chris

    Maybe for your interest, in case this appears on other systems:

    reboots, manually install the new drivers and reconnectings did not work, I've been just the mouse and keyboard, so

    Updated Windows drivers, this solves the problem, seems to be a problem of port driver.

  • install an SSD in Workstation Z600.

    Hello

    Description explains it, I thought to replace my current HARD drive to an SSD.

    I did a lot research on this myself, but thought I would check here just wrap there are any falls known issues/pit with a ssd in z600 workstation installation, I will look at adding a 1 TB ssd.

    1. installation of the material? the 3.5 inch z600 caddy would not accommodate a SSD, HP sells racks that will fit the z600?

    2. compatibility with the workstation? are there types of SSD that are best suited for z600 workstations?

    3. how to install and set up? is it as simple as connect via a cable SATA SSD and installing the OS? The Bios settings?

    Any information would be appreciated,

    Griff

    Installed a Samsung 500 GB SATA III Evo in my z600... and it works perfectly.

    Installed last week and have been installing programs and saw the general use of it without any problem. I wanted to test properly before posting a reply. It would be possible that I have problems with it later, but I would of thought that if she had problems I would be this topic now.

    My SSD reads to 282 MB/s and writes to 270 MB/s - write random shuffle (IOPS) (IOPS) 51612 47395.

    Being a SATA II gen workstation his don't reach only the full potential of the SSD to 540 / 520 MB/s writing but reading what I read, you won't notice the difference even its so fast... and I accept CC suite, mozilla, (did not install 3dsmax yet) all boot in seconds compared to the minutes on the old HARD drive.

    Just to note that does not use a HP recovery disk to reinstall the OS. I have used a .iso official windows 7 and booted from USB (although it has some things useful, I didn't HP bloatware) drivers installed perfectly smoothly. Windows serial on bottom of Tower

    1. installation of the material? the 3.5 inch z600 caddy would not accommodate a SSD, HP sells racks that will fit the z600?

    "Via Scott comments, look for the version of"needs-tool"in the post above, mine cost £8.50 and takes every 5 seconds to fit the ssd for the z600. I would not buy the version of the tool-less sugguest... unless you have no hands and a lot of money. »

    2. compatibility with the workstation? are there types of SSD that are best suited for z600 workstations?

    "Yes, they are HP approved detailed SSDs in, but the post above, I had no problem with the class of consumer SSDS, but you dice with what brand." The Samsung EVO 500 GB, no problem. You can use a SATA III ssd, but you can get questions as warned by HP as their firmware does not support certain types (so basically if it doesn't they don't help you) ".»

    3. how to install and set up? is it as simple as connect via a cable SATA SSD and installing the OS? The Bios settings?

    "Make sure that your BIOS is set to RAID + AHCI (mine was already setup like that)." I used the samsung Wizard tool after installation and it will say that your PC is not set to AHCI, but I just ignore it. As long as ORGANIC and firmware are up-to-date, you'll be fine. Use a blindmate card to install the ssd (see above messages). Make sure you get the latest firmware on a USB before installing SSD, it should be the first thing to check after the installation of the SSD. You don't need to change cables SATA from II to III that the cables are retro-compatible... anyway have a SATA III in a z600 will limited you to speeds of SATA II (which compared to a normal HARD disk are ridiculously fast). Just plug in and install OS. It can be interesting to read about boring SSD, the magician of samsung suggest some things to do, but not all are necessary, either its life expectancy more performance... defintely deserves to be read to the top, if it's your first SSD as it was for me. »

    Upgraded high hand the best I've done to my workstation and very simple to do. I'm glad that I waited for better support and cost down on the SSD before using.

    You want to say a big thank you to Scott Harrison for his help on this. I nagged him much but really appreciated his advice! Congratulations to Scott and anyone else who posted help.

    Enjoy your SSD, I'll do it.

    Griff

  • HP Z600 basic workstation: 3.1 in a workstation Z600 Usb Adapter

    I would like to know if the Z600 will support the 3.1 USB card and if so, do I need for installation?

    Okay... that card should work in a Z600, but it will operate at the speed of 10 Gbps USB 3.1 standard?     N °

    The HP Z600 workstation has no generation PCIe connectors 3.  It has 3 PCIe Gen2, 1 PCIe Gen1 slot slots and 2 PCI slots.  Here is a link to the page HP describing the slots of the Z600:

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01719695

    Here is a note of StarTech regarding the speed of the card, points out: "the maximum speed of this card is limited by the bus interface.  Flow max PCI Express Gen 1.0 is 2.5Gbps.   PCI Express Gen 2.0 flow max 5Gbps.  High-speed PCI Express Gen 3.0 max is 10 Gbit/s.  Available bandwidth (10 Gbps) is shared equally between the two ports. »

    These cards in PCIe USB 3.0/USB 3.1 generally need supplementation of power... the + 5V they need does not come to the top of the slot, but it's easy to find a device to SATA power adapter 4 son "molex" which can provide 5V power higher they need to meet potential power draw (compared to what needs USB 2.0).  All this information comes from research find how to add Texas Instruments base HP USB 3.0 card to our xw6600 workstations, that have 2 PCIe Gen2 slots (the others are Gen1).  Z620 gives you some Gen3 PCIe slots... Slot 2, 4 and 5.

    Here is the diagram of slots Z600:

Maybe you are looking for

  • HP officejet 7580 print cartridge error message

    I have a HP officejet printer 7580 all-in-one with the error message "the following ink cartridges appear to be missing or damaged. Magenta (M) "I followed the instructions on the HP site troubleshooting, first changing the magenta cartridge, clean t

  • can not get on the internet for download readers updated for vista

    I just received a computer laptop windows 7 and need to know how do to download windows vista HP driver updated on my W7 so that I can download on my vista desktop.  I can't online with my desktop vista because drivers must be updated.  Can anyone he

  • update of the bios under windows 8.1

    I am trying to install a new graphics card (gtx750ti) than ATI Radeon HD 4600 Series (Microsoft Corporation - WDDM v1.1) and have updated to 750w power supply. Turn on the pc and no video, the pc is running but nothing on the monitor. Map vid tested

  • How to clone a 32-bit Win 7 HDD on a new hard drive Win 7 64 bit and maintain the 64 bit OS?

    Running Win 7 Home Premium 32 bit, want to CLONE the data and programs for the new Win 7 Home Premium 64-bit computer. I'm "fears that the process would clone the 32-bit operating system, thereby losing the advantage of the 64-bit system."  Is there

  • Problem with BatchDriver API

    I am trying to download a txt file in the workspace of Hyperion.Follow steps below:1 has created a batch_driver.cf control file with sub contentfile data uploaded with BatchDriver name=sqr^path=/BatchDriver^file=D:\UnxUtils\sqr\sqr.txt^desc=Text ^ go