This Bohemian Macbook 13 inch sleeve suitable for my new Macbook?

Similar Questions

• How can change the bookmarks system wide for each new user?

  I wish that every new user who creates a count in a Debian linux system to achieve a specific set of bookmarks. I can't find where to put my custom bookmarks.html file to do this.

  Create a folder/defaults/profile in the Firefox installation folder and place a bookmarks.html file in this folder.
  
  This is the same folder of models for the new profiles that used in previous versions of Firefox, but all files that were there, then are now in archive omni.jar and the profiles folder in are no longer present.

• Apple Care suitable for iMac (21.5 inch, end 2013) India?

  Apple Care suitable for iMac (21.5 inch, end 2013) India?

  It will work Amazon India

  Only if your Mac still has 1 year warranty (standard) otherwise you do not qualify with your model 2013.

  Read here:

  The AppleCare Protection Plan can be purchased as long as your Mac is still covered by the limited warranty of one year. Purchase of this program is not required to purchase the covered product. See AppleCare Protection Plan program terms and Conditions for complete product Details.

• I get an error message after you migrate my Adobe apps for my new MacBook Pro.  It reads "Adobe Creative Cloud is necessary to solve this problem.  However, it is missing or damaged. "I tried to download and reinstall a new copy but error

  I get an error message after you migrate my Adobe apps for my new MacBook Pro.  It reads "Adobe Creative Cloud is necessary to solve this problem.  However, it is missing or damaged. "I tried to download and reinstall a new copy, but the error message still appears.  Help, please.

  do not migrate the adobe programs.

  All uninstall adobe that you migrated.

  clean by, http://www.adobe.com/support/contact/cscleanertool.html

  and then properly install your adobe programs using the cc from here, download Adobe Creative Cloud apps desktop application | CC free trial Adobe

• Another post "this set of operation will be OK for CS5.5?

  This again is another question "is the computer I want to be good enough for CS5.5." Before I ask you to please forgive my ignorance and the length of this post. I am new to having to worry about hardware. In the past any decent PC meets my needs, but I find that this is the case I now need to edit video.

  So I'll start with my special needs. I need portability. I am a student and directing a summer camp. In my role at the camp, I identified the need to improve our hardware promotional camp, and that's where video editing comes into play. I will be filming and editing of several short promotional films and a couple of short documentary style using DSLR footage and perhaps a small camcorder or two. After much research and play with some free trial software, I have it set on CS5.5, but there is that one problem, my computer is not up to the task. Conveniently enough, my current computer has seen better days, and it's time to spend anyway, so I was searching and shopping around trying to find a suitable computer. That portability is a must and I can't afford a decent desktop and a laptop (and even if I could it would be boring data transfer back), I've been looking at laptops. It seems that any mobile off - the shelf that is well suited to run adobe isn't really all that portable. Of course, you can carry it much easier that a computer desk, but you can't expect to get a full day in the life of the battery out of it, are not a reasonable weight to carry around the creation (my point is that a computer 17 "laptop is out). I did some digging, and after reading a lot of posts on this forum and a lot of information from other sources, I think I came up with a solution. I am looking for admission in any people of enthusiasts see potential problems with my idea, and for dell sales representatives are not tech savvy, so I thought it was a good place to discover how well adobe would go on my set - up proposed (I'm not a pro and won't be of feature films (, edition, so I don't think that I need the same performance that your desktop wearing I have just need to perform well with as few hold ups as possible).

  Here's what I came with:

  Dell XPS 14z:

  • Intel core i-7 2640 M (2.8 GHz, with "turbo boost" up to 3.50 GHz)
  • 8 GB Dual Channel DDR3 SDRAM
  • 750 GB SATA, HDD 7200 RPM
  • NVIDIA Geforce 520 M 1 GB graphics card
  • The only information about the screen resolution I could find on the site web of Dell were "true 720 p HD display" after reading a few reviews, I found the specs are lower that the minimum recommended by Adobe, I forget exactly what they are.

  If this computer is no longer that I never needed for my needs no video editing. On paper, it's a nice small laptop, a little expensive ($1300!), but they can be had at a very reasonable price ($700 - $800) refurbished Dell online workshop. None-the-less, I see several problems with this configuration.

  First is the screen: it is not enough. Which is easily solved using an external monitor, and you can get a pretty decent screen off tiger direct for less than $200. I can tolerate a video editing at a desk, I need portability to other applications.

  Second is the hard drive. Reading this forum, I understand that editing with a single hard disk can slow things down a bit. I was wondering how big a deal it really is for the occasional Editor? There are adapters that allow you to place a second hard drive, where the optical drive is in this laptop. If necessary, I intend to put a second 750 GB 7200 rpm HARD drive where is the optical drive. Problem solved, right? Did anyone see any problem with this idea? My next question on the subject of the hard drive is: how would a third hard drive really benefit me? And data transfer using a with a USB 3.0 external HARD drive connection be fast enough to be a viable option for a third drive? Anyway I could take an appropriate hard drive and caddy for a little less than $175 and $100 for a USB 3.0 external HARD drive to be used as a third drive if necessary.

  The third potential problem is the RAM. It seems there are a lot of opinions out there about how much is enough. 8 GB is enough? According to the website of intel, this particular processor is compatible with up to 16 GB of RAM, and after searching the forums I found a few cases of people expand their RAM on this computer to 16 GB with no problems. I understand that I can replace the 2 x 4 GB current implemented with 1x4Go + 1X8GB or 2x8GB to give a total of 12 or 16 GB of RAM. Is it necessary or even beneficial?  8 GB would be more than enough for anything else I do, and since I have some experience with video editing I thought I would ask those who know. Need an upgrade of RAM? By using this configuration, I could update the RAM 12 GB for about $100 and 16 GB for about $200.

  Finally, the graphics card that is provided with this computer is not on the list of cards recommended by Adobe. I understand that this is because it only supports CUDA, how much of an issue is it? I'll be able to edit video without recommended card effectively?

  The point of all numbers is as follows: 800 + 200 + 175 + 100 = 1, 275. $ 1275ish seems to me that I could get a very reasonable video editing set up which is always portable. It is less than the price of the tile on these laptops and much less than a Mac book pro, which is the world's first recommendation when I mention that I want to use the computer for video editing. This looks like a very reasonable price for a laptop with a processor intel 2.8 GHz i7, two 750 GB 7200 rpm HDD, 12 GB of RAM, and an external monitor when I want to sit and change. Am I delusional thinking it would go well with CS5.5?

  So I guess the point is the following. Life is any compromise, since I need portability and I am not a professional (just an anal consumer with high standards :), I am willing to trade a little performance for improved portability of video editing. I want the opinion of those who have experience using CS5.5 with different layouts, my proposed set-up seems like a reasonable compromise? Improvements are still needed? They would be sufficient to provide a reasonable editing experience? All the other tips (not to mention than buying a desktop computer or a computer wicked expensive 17 "laptop which weighs two to three times more expensive and chews through the battery life)?

  Thank you for sticking with it and give me any comments. We appreciate it!

  Benson,

  Trying to stick with your original objectives and I think I can see where you're going, I have some tips and suggestions...

  -Since the SLR CAMERAS and camcorders (I guess as ACHDV) are very difficult codecs; I suggest that you consider only Intel QM 32nm processors (i.e. i7 2670QM w / 4 carrots + hyperthreading); Having twice the nuclei is HUGE for CS5/5.5

  -Suggest that go with a 14 "display 1600 x 900 for a good compromise between size, weight and cost

  -A video installation of nVidia level "gamers" will allow the massively useful EMT be put on (carrots GPU cuda)

  -8 GB of RAM will work; of course the 16 GB would allow for faster burns to DVD, but I don't feel that to be a need

  -Supports for the conversion of optical Bay NewModeUS are asesome to add a 2.5 "2nd if you need to change on the fly, but since you said you don't need this capability I suggest you get the external drive USB3.0 to 7200 RPM bigger, more formidable, you can plug in when you change. Of course a RAID 0 (disk 2) peripheral USB 3.0 would be even more ideal, but it can also break your budget.

  -Dell Alienware M14x meets all of these criteria; Yes, it will be a little heavier. Yes, it will be more expensive. But, more important still, it will get the job done. Any laptop ' thin, light and smooth "and which includes the current more little line of Macbook Pro won't be so IMHO.

  Kind regards

  Jim

• RT: Remote desktop says "cannot find a device suitable for C drive.

  Hello

  There is a french position on exactly the same topic, but I can't apply the solution given here.

  My problem is this: I have a remote, ready to work as a target RT Office. It has been verified for compatibility, the hard drive has been formatted to FAT32, it was found by my host and received a static ip address. I installed the software, I need (LabView RT 9.0) using MAX. Now, when I try to boot with the option 'start using software installed on your hard drive', all I get is the message

  "Cannot find a device suitable for C drive.

  I have reset the BIOS, tried to format the drive hard in the other format, uninstalled and reinstalled the software, tried to start the pc target without the USB, but nothing seems to work.

  You have ideas on what goes wrong?

  Thank you

  Samuel

  Have you tried changing the settings of the BIOS for the hard disk controller?

  There could be different modes available.

  Refer to the hard drive of this document: http://zone.ni.com/devzone/cda/tut/p/id/8239?OpenDocument

• Impossible to install the software to receive error message like "16-bit MS-DOS subsystem config.nt msiexec.exe file system not suitable for running MS-DOS and Microsoft Applications."

  Hello

  Original title: problem installing the software
   
  When my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box.
  "the 16-bit MS-DOS subsystem
  The msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »
  Grateful for any ideas on how to fix this problem!

  Hello

  1. what 16-bit or software program you try to run? Should I use the CD Rom drive?

  2 - is the question also appear during the installation of Windows updates?

  3. have you made changes on the computer before this problem?

  Follow the methods and check them out below:

  Method 1: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Hope the above information is helpful.

• My Lenovo G570 suitable for Windows 8?

  Lenovo G570 is SUITABLE FOR WINDOWS 8
  
  

  HELLO I JUST BOUGHT A LENOVO G570 COULD SOMEONE PLEASE ME SAY IF IT IS SUITABLE FOR 8 WINDOW

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Hello

  Most of Windows 7 systems can be upgraded to Windows 8.

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems. There may be BIOS, chipset and on-board staff
  device driver updates available or needed.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ===================

  See the Compatibility Center.

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Download and run the upgrade wizard.

  How to download and run the "Windows 8 Upgrade Wizard"
  http://www.eightforums.com/tutorials/11885-Windows-8-Upgrade-Assistant-download-run.html

  ===============================

  -Excellent how-to articles by MVP Andre Da Costa

  TechingItEasy - part 1 how to upgrade the Windows 8 Upgrade Wizard
  http://techingiteasy.WordPress.com/2012/11/06/part-1-how-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

  TechingItEasy - part 2 How to upgrade the Windows 8 Upgrade Wizard
  http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Serial number does not work after the transfer of OSX and apps for the new Macbook Pro

  My serial number does not work after the transfer of applications and OS X for my new Mac.  Although the Adobe specifications say it is compatible with the older OS X, it does not seem to have no compatibility issues because

  -My old Macbook Pro has Yosemite and was fully running CS5 Web premium without a problem.

  -My new computer has the same * exact * OS X transferred in which the suite was fully functional with the trial.

  A support of top-level, software engineer, or someone who takes care of the soap operas could

  -Please provide a number of test series to test with?

  - And/or activate my series?

  - Or show how to disable the publication series on the old disk hard if I can't use the old computer?  So that I can use with the new computer?

  I chatted with technical support that keeps saying that it's a compatibility problem, to install with old OS X or buy a newer version. But I know that CS5 works with Yosemite (as I use it myself), and the only question I had is that serial # says invalid, which is separate from the functionality of the program.

  I'd rather not spend hundreds more to get a new suite, when I spent a lot for CS5 already and know is fully functional on Yosemite.  I have also not return to an older operating system and break things.

  Moreover, I used to be a general technical Support and I am a coder of web applications, so I understand that this isn't just some sort of "reboot" of the question

  No info to solve this, or a means to achieve at the highest level Tech support, would be greatly appreciated!

  Thank you!

  Transferred apps will certainly question of activation, because licenses files creation is completely dependent on machine, it willl created according to the particular Machine ID, if you transfer the application from one computer to another, there is incompatibility.

  Therefore, it is very necessary that you are using the original installation media.

  Download the CS5 products

  If you do not agree with the process of removing and reinstalling, try wiping the contents of SLCache and rename the SLStore folder.

  
  

  WARNING: Do not forget once erase you the contents of this folder, all Adobe applications will ask the new license or re-enter the serial number.

  Location: /Library/Application Support / Adobe.

  It is strictly recommended to install Adobe applications using the original installation media.

• I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help

  I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help

  You are 100% sure that you are clicking to download the Mac version and not the version of Windows?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html
  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• VDR is suitable for small and medium enterprises?

  Hello friends,

  I was told that data recovery VMware vSphere suite is suitable for businesses that received less than 100 guest virtual machines. is this true? We cannot adapt to large companies with more than 500 guest computers? Thank you very much waiting for the answer.

  VDR is a very simple and minimalistic solution. If your company has 500 + VMs you should definitely Advanced 3rd party solution to backup, Veeam Backup, vRanger connection or esxPress.

  I use Veeam.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Error when burning DVDs in pre 8.0 "target error device - the device is not suitable for use.

  I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:

  "device target error - the device is not suitable for use.

  I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .

  System configration:

  Win vista 32 bit.

  Processor: Amd athlon 64 dual core 2.60 GHz.

  RAM: 3 GB

  Graphics card: nvidia geforce 6150 is.

  Model number of camcorder: JVC gz-hm320.

  Format: .mts

  Image size: 1920/1080

  Frame rate: 29.97.

  

  Please look at this problem.

  Concerning

  Manoj Khati

  Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Problem burning DVDs. "Error in device - device target is not suitable for use.

  Hi all

  Initially, I had many problems with PE8. However, the update of nVidia Driver resolved most of them.

  Just thought it was important to note the success, but also failure!

  However, one problem remains. I get the following error at the level of the mark of 96% when burning. "Error in device - device target is not suitable for use. It is always the mark of 96% and the program is "[something] compilation" when this happens.

  After searching this site I noticed that the user rgferg posted a similar problem 13 days ago has been redirected to repost in a different place, but never did.

  I tried to burn a clip 1 hour 4 times and each time I chose the slowest burning speed (8 MB/s), as suggested. It seems that the lower support is a culprit, so I bought some Verbatim DVD media - R [quality] try in my optical drive SATA Phillips. I'm skeptical it will work, but nevertheless open-minded. I'll give it a whirl when my computer has stopped capturing VHS, I train.

  Whenever combustion not not the disc was ejected automatically and the burn process actually started and progresses maybe about 40% or more.

  That tells me it's a question of sharing, rather than issue a support. Somewhere on this forum, he suggested that I go through a process of 20 stages and remove/disable each piece of software that can compete with the first, among other things. IF I do this what do I burn through the outside of Adobe? What I need imgburn or whatever it was called? What happens if I like Nero? Nero 6 has worked very well for me for 3 years.

  So I am ready to uninstall my old optical drive burning software, who out there can recommend commercial software which, for them, creates a painless Adobe burning experience without errors or conflicts? Perhaps there is another solution that I've not seen on this forum?

  I am running Windows XP SP3. I have the latest nVidia drivers for my cards SLI GeForce 7600 GS. I have 3 monitors. RAID 0 SATA, 2 GB RAM, Athlon X 2 5400.

  Justin.

  Since you are apparently able to burn to a folder on your hard drive, but not directly on a DVD, the problem is most likely that another program (Nero, for example) is interfering with communications between Premiere Elements and your DVD burner. This is very common.

  Rather than fight with it, the easiest solution is simply to burn your files on your hard drive and then use Nero (or whatever your burner program) to burn the VIDEO_TS folder to a playable disc. This process takes no more time and offers a number of advantages, including the fact that he make several copies of your DVDs very easy.

• Suitable for large enterprise applications?

  Hello
  
  I am in favour of Apex in the Gayshop Oracle Forms, but he has received the following statement: "I'm afraid that because of its architecture of 2 level (treatment of all takes place in the comic book), it is not suitable for large enterprise applications.
  
  Please help me to answer that.
  Not to say yes, "it is" or "no, that is not, the person is just", but saying why it is or isn't.
  References would be nice too.
  
  Thanks a lot in advance.
  
  Gabor

  Hello Gabor,

  Here, a few links:
  [http://www.oracle.com/store]
  [Oracle Application Express reference | http://htmldb.oracle.com/pls/otn/f?p=26380:1]
  [Pinnacle of Paetc | http://www.pinnsoft.com/]

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• When I click on + for a new tab, 9 pages appear on the screen, how can I get rid of this?

  When I run Firefox, it opens normally, but when I click on + for a new page, the new page has 9 small windows on the screen. I searched for help and tried to delete the history. Now the 9 pages are still there but empty.

  This is a new feature. It is expected that when you open a new page rather than it is empty it has miniature pictures that you can use as links to open the pages that you use frequently. The content of the page can be customized.

  It is easy to turn the feature on or off, click on the small grid gray icon top right.

  More permanently, the feature can be disabled if you prefer. Also note if you use the private browsing mode pages can read is not put in a new tab as a thumbnail.

  • See customize the page new tab
  • Private Browsing - use Firefox without saving history