Would a 12-core 2.7GHz outperform a 3.5 GHz 6-core or 8-core 3.0GHz?

Similar Questions

• Just bought h8xt HPE and want to know if they would hold: H70 Core, GeForce GTX 460 and X 650 Gold

  Just buy h8xt HPE (http://www.costco.com/Browse/Product.aspx?Prodid=11771214&search=hpe&Mo=5&cm_re=1_en-_-Top_Left_Nav-...)

  and I was wondering if these components will fit and if they can recommend something similar.

  http://www.Newegg.com/product/product.aspx?item=N82E16814130653

  http://www.Newegg.com/product/product.aspx?item=N82E16817139027

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&DEPA=0&order=BESTMATCH&N=100006662&isNodeI...

  Thank you.

  Hello

  Yes, he has the HD4000 because it's an Intel i7-3770.  Excellent processor.  It could be the next choice for me.

• Mac Pro keeps stopping, lightweight CPU a / b overtemp on

  I bought a used Apple Mac Pro 2.1 in December.  I use it mainly for editing my photos on Adobe PS, using filter of camera RAW.  The unit never gave me any problems, until early last week.  Here are the specs:

  | 8-CORE 3.0Ghz (2 x Quad-Core)

  | 32 GB OF RAM

  | 250 GB SSD

  | V RAM OF 4 GB GTX-680

  | Double BONE - El Capitan (primary) and Yosemite on two separate boot disks.

  All started early last week, with an error screen when I open an CR2 on Adobe PS file.  I got this message...

  "Camera Raw has temporarily disabled acceleration graphics processor because of the error." Update your graphics card driver may solve the problem. "Choose the option 'Use the graphics processor' in the dialog box Camera Raw prefer to re - enable GPU support.

  In 5 minutes, I when preferences and choose 'use the graphics processor', then continued my work.  Subsequently, the Mac suddenly stops without any warning whatsoever! No message, no noise from the tower itself, the power light remained.  I then turned off the power.  I waited for a minute and he went back on.  The password screen, it would be closed again.

  I then let the rest of the machine for 30-45 minutes, removed any buildup of dust inside using compressed air and turned on the unit return to perform minor troubleshooting. as well as other "light work" to avoid an overload of the system... He will stop in 35 minutes to turn on the machine.

  Still, I unplugged everything (including the power cord) to reinstall the two riser cards. I powered the Mac with the access panel open, to keep an eye on something unusual.  All fans are smooth running, no sign of problems.  Until I updated the driver (Nvidia Cuda) GPU, the machine will stop again in 10 minutes!  Frustrated, I opened the side panel to only discover, both red lights (CPU A / B) on the section of the overheating of the logic board.  After the recharge time, I restarted the MAC and ran a tempature monitor I have installed.  I noticed the radiator of the Northbridge turned very quickly when I was running Adobe PS, please refer to the picture I have attached.

  

  I have no idea what to do next.  I'm not sure if I need a replacement PSU, or something else entirely.  Pointers, help and/or advice.  I greatly appreciate it!

  Matt

  Run Apple Hardware test

  Using Apple Hardware Test - Apple Support

  If you do not have the original installation disc with AHT you can download it here and make a bootable USB or optical disc

  https://github.com/upekkha/AppleHardwareTest

  https://gist.github.com/drewreece/2e5eed7dbfbd5dd7e929

  Note that you need to download the specific to your model of Mac AHT.

• Upgrade processor HP Omni 100-5200z

  I want to know I can upgrade my Omni 100-5200z PC. I do a lot of video editing and have tons of problems. I currently have n AMD Athlon II 170u processor 2.0 ghz, but I need a dual-core or multi core. Can I switch, if so with what and is something med I can do myself thank you

  Storm99,

  Daniel has formulated a hypothesis unfortunately all wrong.

  There are only 3 CPU for this computer, all the 25W. See your system specs here:

  http://support.HP.com/us-en/document/c02822223

  The max would be the Athlon II 270u (Regor) (25W) 2.0 GHz

  PS > you power supply is only of 90W.

• G7-1202er HP: Hp Pavilion G7-1202er processor update

  I have an amd a4 - 3300 m apu with radeon hd graphics card and I need to know which processors I can update

  The best would be this one:

  AMD A8 - 3500M 2.40 GHz processor (1.5 GHz FSB, 4, 0 - MB L2 cache, quad core, 35 W)

  G7 manual repair

  Please let us know if you need more information.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• AMD Phenom II N660 vs AMD Phenom II N970

  Hi all, I was wondering that one would be better for the use of things like the CC of Adobe Illustrator and Photoshop and Sony vegas Pro. The N660 is a dual core 3.0Ghz and the N970 is a 2.2 Ghz Quad. I'm not going to be game on it and that these programs it will be used for the internet. I just need what is better for overall performance and programs. Thank you!

  Standard.

  http://www.CPU-world.com/compare/892/AMD_Phenom_II_Dual-Core_Mobile_N660_vs_AMD_Phenom_II_Quad-Core_Mobile_N970.html

  REO

• Why won't this processor?

  I thought it would be good to replace my current processor 2.0 ghz... so I bought an AMD Phenom II x 4 965 processor Quad core (Black edition).

  So makes it a plug as indicated on the site to upgrade hp for my model of pc and made sure it was socket3...

  Then during the installation of this new processor, a message came on the screen saying it is NOT supported, and my PC is going to be shit down.

  Any help regarding, why is that happen and a difficulty as possible?

  I thought about it... it comes to 125w processor... my system can only top to 95w * facepalms *.

  Now to try to get an Exchange... lol

• HPC 2008R2 job template

  I'm running an HPC cluster. The cluster consists of 3 compute nodes, each with 16 cores and 128 GB of RAM.
  Normally when a user submits a job to the cluster, it assigns all the carrots of the node compute 1 (CN1). I would like to create a template so that when a job is submitted, he spread the carrots horizontally across all compute nodes. So, if a user submits a job that will use 12 cores, it would use 4 cores on each CN instead of the 12 hearts of the CN even. Is this possible? If so, how to configure it as a model?

  Hello

  After the question in this forum and check:

  http://social.technet.Microsoft.com/forums/en/categories/

  Let us know.

• Half-bridge scalable processor? HP dv7-4070us

  Hi all, so, recently, I cleaned up my laptop (HP dv7-4070us) of the dust because I kept getting high time even idle. And during the process, I learned that the processor was not soldered on the motherboard, but was rather in a socket! That made me want to ask if it was theoretically possible to move from my current i5 - 350 M to something like processor i5 - 560 M. I know that I can not use the core i7 quad (although I really wish it) because it is quad core not the dual core that is currently in the system. Then it would be possible to upgrade or downgrade my processor. (in addition to the image and unlike bicoeur, I also understand that energy consumption would also limit me, so I think at this point, the highest upgrade would probably be the intel i5 - 580 M 2.66 GHZ?) Here are some of the information confirmed by the maintenance and repair for the computer guide laptop dv7. My apologies if this question may have been asked before and also for my noobness

  For use only with the HP Pavilion dv7 Notebook PC 40xx computer models:
  Intel Quad Core i7-840QM 1.86 GHz processor, SC turbo up to 3.06 GHz, 45W 612260-001
  Intel Quad Core i7-820QM 1.73 GHz processor, SC turbo up to 3.06 GHz, 45W 583053-001
  Turbo Intel Quad Core i7-740QM 1.73 GHz, SC processor up to 3.06 GHz, 45W 612259-001
  Turbo Intel Dual Core i7-720QM 1.60 GHz, SC processor up to 2.80 GHz, 45W 586170-001
  Intel Dual Core i5 - 580 M 2.66 GHz processor, SC turbo up to 3.33 GHz, 35W 625825-001
  Turbo Intel Dual Core i5 - 560 M 2.66 GHz, SC processor up to 3.20 GHz, 35W 625824-001
  Turbo 2.53 GHz Intel Dual Core i5 - 540 M, SC processor up to 3.06 GHz, 35W 594188-002
  Processor 2.40 GHz Intel Dual Core i5 - 520 M, SC turbo up to 2.93 GHz, 35W 594187-002
  Turbo Intel Dual Core i5 - 480 M 2.66 GHz, SC processor up to 3.20 GHz, 35W 634693-001
  Turbo Intel Dual Core i5 - 460 M 2.53 GHz, SC processor up to 3.20 GHz, 35W 626039-001
  Processor Intel Dual Core i5 - 450 M 2.40 GHz, SC turbo up to 2.53 GHz, 35W 613585-001
  Intel Dual Core i5 - 430 M 2.26 GHz processor, SC turbo up to 2.53 GHz, 35W 597624-001

  Hello:

  Noob?  You sound like a pro.  You already know that you need a different motherboard to install a quad core.

  You are right. You can install up to the i5 - 580 M. Plug-and-play.

  I don't know why you would want to downgrade your current processor, but you can if you wish.

  Make sure just do you a good job with the application of a new thermal pads or points of thermal paste on all contacts of heat sink so you don't overheat the poor laptop.

  Paul

• video tearing watching the HD video

  Video problem

  I have a hp compaq dc7600 SFF with intel GMA 950, pentium 4 HT dual core 3.0GHZ and 2 GB ram and I'm pretty sure that this GPU is capable of up to 720 p videos, but even on lower quality videos video flies over and half top video is always a little ahead of the bottom in modes full screen

  first of all, I would reinstall the software driver and video film from the place of origin.  There may be a version update available with a fix.

  Secondly, I would then adjust the system by a check disk and Defrag.

  Thirdly, I temporarily disable all startups and services non-microsoft via a clean boot and also disconnect from the internet during playback of the video.

  If all goes well, trying all the above him video playback will be stable.   If Yes, then you can begin to try to understand of the above did the trick on your system.

  If this isn't the case, then you will probably get graphics performance improved via the pci of high-end graphics card.

• HP pavilion a450n: upgrade

  What is the biggest cpu I can put in everything that I have in now 3.00 ghz intel pent 4 with hyper threading Tech im going more of ram 2 gb ithink is everything I can run it on here.i want best hd it is assumed have160gb 7200rpmultra dmn hard drive. but I did not. I have barely 40 GB. so, if you can help with a bigger. and a bigger power supply that would be wonderful thanks

  • Approved maximum processor: 3,40 GHz Pentium 4 HT processor

  This thing is 11 years old. My best advice is to stop putting money into it. The difference between what you have and a p4 HT 3.4 will be not useful to open the side panel to install it. 2 GB of RAM is not enough for the internet and today's software.

  Even if you can go to a flea market and find an old Core 2 Duo machine and swap in your drive hard and other things you would be at least in a machine, you can use.

• HP Pavilion P6-2170 - support for virtualization?

  I bought a HP Pavilion P6-2170 today and wanted to turn to virtualization Hyper-V (I run Windows 8 Enterprise).

  The CPU would support it (Core i7), but I'm not sure about the motherboard (it's a 2AC2 of PEGATRON CORPORATION 2.00).  There is no option in the BIOS, so my question is this computer supports virtualization?

  Hello

  Should be safe in the BIOS as shown:

  http://h30434.www3.HP.com/T5/desktop-hardware/hardware-virtualization-enabled-but-not-working-in-HP-Pavilion/TD-p/1397175

  Kind regards.

• PIX 515E failover

  I have a pair of PIX 515E (6.3) running in failover mode. They are currently connected to a single chassis base. We are upgrading our network with the heart, dual 6500's. Is there a way to connect each PIX to a separate kernel (1 PIX - Core1, PIX 2 - Core2) to allow a failure of the base?

  Core 1 and Core 2 will have a L2 link between them. If the current active PIX is connected to Core1 and Core 1 dies, this would not lead to support PIX failover. All LAN traffic would go through Core 2, but since he does not have an active path to the active PIX 1, traffic would drop. My reasoning is correct?

  Is there a way to connect the PIX to two cores running V6.3?

  Hello

  If you use the cable-based failover, you can change the basis of LAN failover.

  Read http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/failover.html#wp1024836

  I hope this helps.

  Best regards.

  Massimiliano.

• Adobe Premiere using 99% of memory and freezing computer

  Hey all,.

  I encountered a problem with Adobe Premiere use almost all of my computers from active memory. I use first very well for about two months and was in the middle of editing a video of 5 minutes. Usually, when I'm editing, in the Task Manager, he said I use about 4 k Mo of memory. Now all of the sudden opening of this project, I use 12 k Mo of memory. The project is delayed, stops responding and hangs my computer. I don't know what caused it. I have a laptop ASUS game that is more than capable of dealing with this software and it worked perfectly. Something to note is that all this happened last Friday, after that I updated the first. Any help finding this would be really appreciated!

  Processor	2.6 GHz Core i7 6700HQ
  RAM	16 GB DDR4 SDRAM MEMORY
  Speed of memory	2133 MHz
  Hard drive	Drive HARD 1 TB + NVMe
  Graphics coprocessor	GTX970M 3GB GDDR5 NVIDIA

  Jim Simon mentioned in another thread as a known problem. No matter who he knows in OS X, or is this windows-only so far?

• Rendering and export failed with an unknown error because of the color of Lumetri?

  I am rendering & export failures with an 'unknown error' code within Premiere Pro and Media Encoder.  I think that the problem is related to the Lumetri color filter that is widely used in all of the timeline.  There are hundreds of clips and each clip has 2-4 color filters Lumetri applied.  Each clip also has the red giant Cosmo and filter FilmConvert Pro 2.36.1 coming to overlap (visually underneath by order of effects filters Panel) all filters from Lumetri.  The reason why I believe that the problem is related to the Lumetri color filter is that it is the first time that I use.  Previously, I used the filter red giant Colorista III coloring, but last week decided to try using the Lumetri color for the same effect.

  Please let me know if anyone has had similar experiences, what were their solutions, or if someone has some ideas on how to solve this problem.  I would really appreciate the help!

  System details:

  Windows Pro 64-bit 10

  Intel i7 5960 X 8-core 3.0GHz (cooled water and too quick to 4.2 GHz)

  64GB 2133 MHz DRAM (non-ECC)

  2 x Nvidia GTX 980 4 GB GPUs (not in SLI)

  Intel 750 PCIe 400 GB SSD (for BONES)

  SSD Pro 1 TB Samsung 840 (for Adobe Cache)

  SSD Pro 1 TB Samsung 840 (for export)

  Matrix RAID 5 of 48 TB (eight 6 TB HDs with MegaRAID, LSI 9361-8i card) (for media)

  Information on the timeline:

  1920 x 1080 (original video files are MP4 UHD scaled down by 50% in the timeline)

  23.976 fps

  CUDA Mercury Render Engine

  Length of the sequence: 14:30

  I have discovered a workaround of sorts.  I noticed that when rendered in PP he would make progress before a failure (the green line that precedes the timeline would get a little longer).  If I saved this progress and rebooted the system, then tried to make it again, it would make a little further.  I've done this dozens of times for 4 hours make completely a 14:30 long sequence.

  I noticed doing this routine that my CPU was maxxed on all rendered.  Resource monitor reported the use of CPU to 143% continuous (all other indicators RAM, disk speed, etc. were well under their maximums).  This brings me to suspect that maybe there is a problem with overheating of the CPU.  But who would be closed for the entire system, correct?

  Once the entire sequence has been made (all the green lines above clips) I tried export by using the "Use preview files" option enabled.  Failure again.  I tried export uncompressed AVI, Quicktimes and PNG sequences.  All have failed.  I tried to export to PP as well as TEA.  The two have not.  I tried to export with option 'To make maximum quality' is enabled.  Surprisingly, this product the longest time encoding managed (32 minutes before failure).  As by chance, using the option of MRQ kept my CPU loads sawtoothing between 100% and 75%, then maybe there's something to the CPU overheating theory?

  In an ultimate attempt desperate to save my video project (looming deadlines!) I divided the sequence of Assembly in five servings (I cut on the melted white or fade-to-black transitions) and exported to each of them.  This copy export times within 20 minutes.  It worked.

  I noticed this another Adobe Forums thread that seems to speak of the similar difficulties with effects of Lumetri in Creative Cloud 2015.  Perhaps the Lumetri effects are not ready for prime time?

  https://forums.Adobe.com/thread/1236018?start=0 & tstart = 0

  Please let me know if anyone has any ideas on this.  In the meantime, I'll wind up this project and never use Lumetri effects again.

  Hello Kevin,

  Thank you for offering help to solve this problem.

  I was able to export the majority of the sequence with all the Lumetri effects, red giant and FilmConvert mixed in clips.  After the sequence using the tedious method described above I segmented the sequence in the quarterfinals; all exported except one.  I divided it into two; Another exported doesn't have.  I cut half too, once again only half exported without failure.  I finally reduced the embarrassing part until a second sequence clips 35; an interview with green screen with superimposed titles and superposition of b-roll clips.

  I removed all the effects of the Lumetri of these clips and replaced by Red Giant Colorista III effects, which are very similar to the effect of Lumetri in the GUI and application.  The sequence made completely without "unknown error."  Then it was exported successfully (and used about 70% when compared to more CPU activity 110% with the Lumetri to export).

  The difference would be that the effect of color of Lumetri has this YUV icon next to it in the effect controls panel?  Which means that YUV?

  The problem is perhaps not totally related to the color of Lumetri effect (as I said, I was able to export the majority of the 14:30 sequences use, although gradually by segmentation of the sequence into smaller portions), but if the move is a solution then I'll use it.

  I lost a day to fix this.  If this thread is useful to someone else, then it was worthwhile.