Wouldn't Satellite A200 completely dead, no AC adapter / CC tested and work lights

Hello

A few days ago, that my screen went, ordered an lcd inverter and using an external monitor in the meantime.
But now the whole machine is dead. When I plug in AC adapter / CC have not even lights to show power.
I tested the AC adapter and works very well.

Can someone please tell me what could be wrong, maybe what part do I replace to make it work again.

Hi Grega200,

Have you ever tried this FAQ document?
[What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

If it doesn t work I think you need professional help from a service provider allowed. Maybe your motherboard needs to be replaced or else because it looks like a hardware problem.

On the Toshiba site, you can find a list of ASP.

Good luck! ;)

Tags: Toshiba

Similar Questions

  • My I Pad has gone completely dead. It is a model and just completely dead tw vertion. Anyone has an explanation please

    My I Pad has gone completely dead. It is a version2model and just completely dead. Anyone has an explanation please! I turned on and off and the top (or at least gone through the process) charged no sign of life at all. ???

    How long have you leave the charge for the iPad? It will take at least 30 minutes on the charger before an iPad with a completely dead battery react. Be sure to use the charger supplied with the iPad, or its equivalent. Do not recharge an iPad by connecting it to a USB port on the computer. After 30 minutes on the charger to reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

    If the unit still doesn't start not to make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

  • Satellite A200 completely stop working

    Hello!

    I have a big problem: I have this 2 years computer laptop satellite A200 myself and last month, he began to stop working when I run an application, he simply spend some time and I can't move the pointer of the same mouse the keyboard and the current application were all stop working for almost an hour.

    So what I did is to hold the button walk / stop and after a few seconds, I did it again. Last week several same problem and same thing, I did, but now he began to black from the LCD screen and sometimes all could start. Thinking that the problem is on the BONE I changed from VISTA to XP, but then the same problem occurs.

    Please help a lot me... thanks and Goodbless.

    You will not fix anything using the "Memtest86 but this tool would test your RAM modules."
    If something would be wrong with a RAM then this utility detects an error and it would mean that a RAM replacement is necessary.

  • Satellite A200 - 1 M 8: the monitor shuts off and cannot back up to Vista

    Hello

    I have the Satellite A200 - 1 M 8 with original Vista. Sometimes, I have some problems with the display (I have the latest drivers).
    The monitor turns off (not as usual but it is gray instead of black) applications flow normally (I hear the music of film, this) but I can't get back into windows.

    When I push button hibernation and I try to go back to windows, I see the blue screen then the computer resets.

    It happens very often and is really frustrating because my internet disconnects and downloads.

    I don't think that the temperature is too high because I think it's cool. How to fix this?
    Maybe some graphics settings or new BIOS?

    Please help me. I can't stand it!

    null

    Hello

    Your laptop is preinstalled with recovery delivered image, or if you have installed your own operating system?

    I have the Satellite A200-1CR preinstalled with original Toshiba Recovery DVD. I use the laptop quite intensively all day, but I never noticed anything like that. Since when did you notice this strange behavior?

  • Satellite A200-1s 5 charger (AC adapter) is defective

    Hello

    Several days ago my cell phone charger started broadcasting a few strange sounds like an ACE with a variable harmonic frequency. And at the same time that he stopped to load laptop.
    It's my favorite laptop and I'm really happy with it except this incident with charger.

    Laptop:
    Model name: SATELLITE A200-1 s 5
    PSAE6E-07903DRU model number
    Serial number. can be sent on request

    Adapter AC/DC (charger):
    Model: PA3290E-3AC3
    RN193 V85
    Output: 19V 6.32 A (6, 32a)

    Please let know us where I can buy the same charger or what model of charger can replace it? It's really unique and I can't find it on Amazon or Ebay.

    Hello

    You have posted a reference number for this adapter.
    Google just for this part number and I m sure you will get offers online.
    If you can get one from a Toshiba authorized service provider in your country.

    Welcome them

  • Satellite A200 hangs only with AC adapter

    Hello

    My toshiba satellite A200 I have owned for about 3 years has had a problem for a while or when I plug the power adapter into the laptop fails.
    I bought a new power adapter, I have re-installed windows several times and a few other things all to nothing does not.
    Her dosent computer seem to be blocked in safe mode for a reason even if I'm sure that it's a hardware problem.
    Any help would be appreciated, thanks.

    Hello

    Since the new OS installation didn't help, I think that could be a problem with a motherboard.
    The point why the OS goes not down running in safe mode is simply;
    Safe mode is a diagnostic of a computer OS mode. A few basic drivers would be responsible and safe mode will have managed to reduce the functionality and many non-core components are disabled.

    According to me, the laptop computer mother should be checked and if necessary should be replaced.

  • Re: My Satellite A200 - 28 p has stopped reading all DVD and CD

    Hello

    My Satellite a200 - 28 p used to read CDs and DVDs, but all of a sudden does not recognize cd or recordable cd brand he does not even recognize the recovery disc came with my laptop.

    I only got November laptop of Dixon's so ask why I'm having this problem when it is relatively new. It is a hardware problem software? All patches, easy?

    When I insert the disk and go to my computer it does not there be a disc in the drive of dvd - rw at all. When I double click on the dvd - rw drive, the Player automatically opens and I am asked to insert a disk, even if there is already in the drive.

    Help! : o).

    Hello!

    I agree with Akuma. Try removing the upper and lower filters that is also described in this paper to Toshiba:
    http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

    If it doesn't work try to boot from a bootable CD or DVD. So you can make sure if it s a software or hardware problem.

    Good bye

  • Re: Satellite A200 - 1 M 4: output TV is black and white

    Hi all

    Thanks for the wonderful forum. I think this is the right place to ask.

    I own a Toshiba Satellite A200 - 1 M 4 model, and the problem is with the TV available. When I connect the s-video cable to the TV, the TV shows a signal black and white instead of color. I've tried the settings PAL and NTSC on the TV but nothing worked.

    Went to the market to look for if there is a fault of cable but changed 4 or 5 wires and the problem is the same.

    I guess one of the store people said that there is a software to convert black and white to color.
    I googled to find out more but ended up with nothing

    Can anyone recommend what should I do to get the color of the TV option.

    Thank you

    I assume that your TV settings are wrong.
    I have the same problem. I've connected the laptop to the TV of the parents and the captain was black and white. But the captain was fine on my TV.

    I activated the option s-video on the other TV and I got the color ;)

    I think you should check the settings too.

  • Re: Satellite A200 - 1ZF Win XP & Toshiba control buttons do not work

    Hello

    I have a Satellite A200-1ZF with Vista installed initially.
    I removed Vista and install XP. Then installed all the drivers and almost everything works but these keys (power, www, mediaplayer, play, stop, back then) on the upper part of the phone do not work. :/

    Only be able to work properly... sometimes www and mediaplayer, but rest n, t work at all.
    I have Windows Media Player 9 series. I don't know if this is the problem with my version of drivers or windows media or something else...

    Help, please...

    Hello

    Satellite A200-1ZF belongs to the PSAE6E series.
    Choose the Toshiba driver download form European series.

    You will find an XP BIOS. If you are using Win XP on this laptop you will need to update the BIOS to version XP!
    In addition, you will need to install the Toshiba c. 2.48.2.2C controls.

    This tool is necessary to get the Toshiba Media buttons works!

    Good bye

  • Satellite A200 - problems with the AC adapter / CC

    Hello

    The problem concerns a Satellite A200 (PSAF6A-02H01N).

    Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
    But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

    The problem got worse now and the laptop will not load Vista end without crashing.
    We have now reduced the computer down to have only a problem when the power adapter is connected.
    The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

    The problem persists with the AC adapter is plugged in and the battery removed.
    The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
    The laptop will not work under the battery power for 30 minutes max.
    I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

    Is this only a problem of AC adapter or the problem with the laptop?

    Thanks in advance...

    The Canada Gazette

    I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

  • Satellite A200-1AX (PSAE6E) - S-Video picture black, white and rolling

    I purhcased my A200 Satellite on my last trip abroad when I was away from the USA.

    Recently I tried to play a movie via s-video on my Sony TV purchased USA. The image is black and white and hilly. I have updated, updated and done everything possible for computers and readers. I tried an another Toshiba identical to mine, but was bought in the USA. It worked fine and all colors.

    Any help is appreciated.

    Hanks

    Hello

    I had the same problem a few months ago, and the reason was an S-video cable defective. As far as I know it was a very good cable too and I went to the store of the computer purchased a high-quality S-video cable. It was a little more expensive, but it works perfectly!
    Check it!

    In addition, you should check the output signal from the S-video port and the input on your TV mode. If you use NTSC, you have to set this mode, otherwise use the PAL mode.

    Good bye

  • Re: Satellite A200 - problem with generic AC adapter

    I own an A200 running Windows 7; I got it for a few years and the battery had deteriorated to the point where it concluded that a small amount of current, so I ran on aware of virtually all the time. However the CAP at the end of the cord (where it connects to the computer) became gradually more flexible and more flexible to the point where I had to twist and turn and argue it so in order to get the power flowing into the computer. the other day it stopped working completely.

    I went out and bought a third party adapter ("Lite-On"); I'm in a foreign country, but the adapter has had the same type of plug and the same (same input range, same output voltage) characteristics of power like the broken adapter that came with the computer. When I plug in, all the power lights comes on and it seems to work perfectly. When I start the computer, however, sometimes I will get a screen that says "Windows could not start... possibly as a result of a loss of power ' despite all the LEDs remain solidly lit during startup." This happens only occasionally. What is happening at each time is that in a minute or if all the lights go out and the computer turns off instantly; the LED will light up and then back up again instantly. Sometimes this occurs during the boot process, and sometimes I am able to go as far as opening a session on Windows before his stop.

    Is someone can you please tell me what the problem might me?

    After reading your ad, I also believe that this issue has nothing to with AC power supply.
    There must be another reason for the off switch.

    In most cases, this behavior is typical of overheating. In short period of time material reach the level of critical and portable temperature simply shut down without any warning.
    You can do a little test: start your laptop computer and enter the BIOS settings. Leave it for a while and see if the same thing will happen again.

    As already wrote Akuma, try cleaning the cold air and the cooling rack.
    Problem is that block cooling grill and portable dust cannot be properly cooled.

  • Satellite A200 - 1 MB-Question on upgrade of RAM and installing XP

    Recently bought a PC laptop toshiba a200 - 1 MB.
    It came with a 1 GB of ram (512 + 512 DDR2, 667 Mhz).

    I want to move the ram to 2 GB, is it possible to add RAM by keeping the originals in place?

    In addition, I want to replace Vista with XP, it is possible to do. The product recovery cd came with preinstalled in vista. Can I install the drivers from the recovery cd and install xp separately.

    Thank you

    The two locations are already occupied.
    If you want to upgrade the RAM you have to remove a module.

    You can upgrade the RAM up to max 4 GB (2 x 2 GB)

    You can use the DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM

    > Also, I want to replace Vista with XP, it is possible to do. The product recovery cd came with preinstalled in vista. Can I install the drivers from the recovery cd and install xp separately.

    This is possible. You need to install the XP from your original CD of Microsoft. XP drivers can be found on the Toshiba page

    Best regards

  • Satellite A200 - 1 M 4: Flash Cards are dark and not transparent after update v1.1.7

    Hello

    You know Flash Cards is transparent and moving flashy when pressing the FN key.
    After that I downloaded & installed PVAT 1.1.7.see card Flash became a dark, not transparent and does not move when you press FN plus (watch suddenly when pressing FN).

    What's wrong?

    PS. I have A200 - 1 M 4

    Thank you

    Nothing is fake. It is simply a new version. Toshiba has offered this setting day and fixed a big problem. Using the latest version of Flash cards were very slow and it was very awkward. Toshiba has designed the new tool and transparency is no longer available.

    I hope that you know very well that these settings are in need of more resources and laptop runs slower. But in the end I wonder: is it so important to you?

  • Satellite A200-1 to 9 has begun to FADE and problems, turn on

    Hello

    I have a toshiba A200 1 to 9 for about 16 months, in the last two months he has started to randomly turn off and had problems to turn on at all.
    It is now does not turn on at all - I guess it's a hardware problem? The warranty is expired.

    Any suggestion as to what I could do? Someone at - it had comparable problems?

    Thank you

    Hello

    For me, it looks like an overheating problem.
    This could happen if the cooling module is blocked and that fans cannot turn with the best performance.

    I recommend using a jet of compressed air to get rid of dust and debris.
    I do from time to time too, and generally this should help in getting the laptop works properly.

    See you soon

Maybe you are looking for

  • Safari freeze of faucets virus

    My safari froze, a blue screen come saying lve has been infected with the fitting, what I do?

  • How can I specify a delay generates a pulse meter?

    Hi all I have a question on the use of the meter to generate the pulse train. I did not how to program but I try the test panel in MAX and I see that it generates pulse train to certain rates and with a pulse duration. I think if it is possible to ge

  • I don't see my external hard drive in my computer

    hard drive problem Hello! I have a little problem with my drive hard seagate newly purchased. "When I plugged in my computer, it says"the device is installed successfully"and another pop-up saying" your unit is now ready for use. but when I open my c

  • Windows updates not working error 80070424

    original title: I get a error code 0 x 80070424 and that the mistake is not found... What can I do? I am on Windows XP and I had a techie above.  I was busy in another room, so I have NO idea what he was doing.  I had mentioned that the last time I d

  • FAT is corrupted

    By turning on my sansa player, I get the message "the FAT is corrupted. ' Connect to a computer and ', and then he refuses to work. The problem appeared after synchronization of mp3 files on the attached external memory card. I've done this before wi