Write data for five seconds

Similar Questions

• How to use a PDF form as a source of data for the second form PDF

  Hello world

  I have the following scenario:

  We want that our sales staff to collect data of our clients through a PDF form.

  We do not like to combine with the PDF we print them or sending them by E-Mail.

  Therefore, there is a solution to fill a second PDF with data from the first.

  1. 1 PDF form with input fields

  2. 1 PDF form must be registered with the entry

  3. 2nd PDF form with a table filled with 1 form data

  4. 2nd PDF form displays the data under the graph with the abilty to edit these data to dynamically change table

  I don't want a hollow guide the whole scenario. I just first of all whether it is even possible to supply a PDF form with data in another form PDF.

  If it is possible please give me advice to know what to look for everything.

  If this isn't the case, I would like to read the recommendations for solutions easy possible to solve this task.

  We do not want to send our staff of sales with PDF solutions to our clients, their collection and their work through a big pile of measures to manage this scenario.

  Thank you and regards

  Christian

  You must understand that there is a big difference between the JS, you might be familiar with (the one used in web pages) and one used in PDF files.

  Although the basic syntax is the same most of the objects and methods are different, as PDF files are fundamentally different from web pages.

  You can find the reference to API JS Acrobat here: JavaScript for Acrobat | Adobe Developer Connection

  The form data can be copied by exporting it to a file FDF then import this file into the other PDF (assuming that the field names are the same), or it can be done using a script that uses global variables. The latter is more automatic, but may require adjustment of the parameters of the application or using a function of confidence (IE, a feature that is installed on the local computer instead of just in the file itself).

  The first is easier to implement and use, but requires the intervention of the user.

• I pressed shift key for 8 seconds - slowed reactions key - how to reverse this trend?

  I was reading an email and the above topic appeared - I tried and it is impossible to cancel...

  Help, please.
  Paul

  Hold down the SHIFT key for 8 seconds.

  Help

  The following table contains keyboard shortcuts that can help make your computer easier to use.

  Right SHIFT for eight seconds	Turn filter keys on and off
  ALT left + left SHIFT + PRINT SCREEN (or PRTSCRN)	Toggle high contrast
  ALT left + left SHIFT + NUM LOCK	Enable or disable MouseKeys
  SHIFT five times	Enable or disable sticky keys
  Digital LOCK for five seconds	Enable or disable the ToggleKeys
  U + Windows logo key	Open ease of access Center

• How to configure a web service primavera to return the data in the second database?

  Hello world

  
  

  We have P6 with WS first deployment on a single weblogic domain server. The first WS returns the first instance of database data.

  Then deployed to the WS second tip on a weblogic domain server separated with a different port. Set up the second WS with < WS2_INSTALL_HOME > / bin/dbconfig.sh, creating a new branch a configuration that specifies one second instance of the database. However, this configuration is ignored, and the second web services return data from the database.

  We have a single domain, including notably the following servers:

  Name / host / Port / deployments

  P6 / localhost / 0001 / P6 (v8.3), p6ws1 (v8.3)

  p6ws2 / localhost / 0002 / p6ws2 (v8.3)

  We have now two different files BREBootstrap.xml.

  P6 BREBootstrap.xml:

  < database >

  < URL > JDBC:Oracle:thin:@db1:1521:db1 < / URL >

  < user name > pubuser < / name >

  password <>anycriptopass1 < / password >

  oracle.jdbc.OracleDriver < driver > < / driver >

  < PublicGroupId > 1 < / PublicGroupId >

  < / data >

  < CfgVersion > 8.330 < / CfgVersion >

  <>configurations

  < name BRE = 'P6 Config_DB1"instances ="1"logDir ="anydir, P6EPPM, p6, PrimaveraLogs"/ >

  < / configuration >

  p6ws2 BREBootstrap.xml:

  < database >

  < URL > JDBC:Oracle:thin:@DB2:1521:DB2 < / URL >

  < user name > pubuser < / name >

  password <>anycriptopass2 < / password >

  oracle.jdbc.OracleDriver < driver > < / driver >

  < PublicGroupId > 1 < / PublicGroupId >

  < / data >

  < CfgVersion > 8.330 < / CfgVersion >

  <>configurations

  < name BRE = 'P6 Config_DB2"instances ="1"logDir ="anydir, P6EPPM, ws2, PrimaveraLogs"/ >

  < / configuration >

  "P6 Config_DB1" and "P6 Config_DB2" including the property database for the database 1 and 2 respectively.

  How to set up a second web service to return the data to the second database?

  
  

  Thanks in advance!

  
  

  Kind regards

  Dmitry

  So, answer oracle support:

  Looks like it is in the documentation, Web Services cannot be configured in this way as the other modules. See the following topics:

  BUG 19516437 - Is it POSSIBLE TO hardcode a DEPLOYMENT of SERVICES WEB P6 to an INSTANCE of DATABASE? (ask if this is possible)

  BUG 19579735 - FOR BEING ABLE to hardcode A P6 WEB SERVICES DEPLOYMENT to A DATABASE INSTANCE (corresponding improvement because it can be done).

  The problem has been resolved by the following:

  1 create the WebLogic domain.

  2 P6 and p6ws deployed on managed servers.

  3 configuration P6 uses the second instance of database and P6 has not begun.

  4 result: the p6ws (from additional domain WebLogic) returns data for the second instance of the database.

  Kind regards

  Dmitry

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• Duplicate option data address for the second plaintiff with a checkbox

  I have been in charge of research and trying things out for hours, without success.

  I don't know if it's about PDF forms or if I should post on the forum of Java, but here it is:

  I have a PDF form with several fields to send the address (address, city, province) data. The application also has a box on another page of the form to a second applicant. The second applicant is a playground of their mailing address too.

  I would like to create a box for the second plaintiff who says 'Even that first applicant', so that if the address data is checked all three fields automatically fill the same information that were completed for the first applicant in these areas.

  I guess it could be something that required some custom JavaScript, but I know very little about how to write code. I've tinkered with a few think that I found online, but nothing seems to work. Any information that could help me would be very appreciated.

  A little more complicated, but not by much. So basically, you can use this script as the box MouseUp action (notice, I used here generic domain names, you can replace them with real numbers in your file):

  if (event.target.value=="Off") { // the box is NOT ticked
      this.getField("Target1").value = "";
      this.getField("Target2").value = "";
      this.getField("Target3").value = "";
      this.getField("Target4").value = "";
      this.getField("Target1").readonly = false;
      this.getField("Target2").readonly = false;
      this.getField("Target3").readonly = false;
      this.getField("Target4").readonly = false;
  } else { // the box IS ticked
      this.getField("Target1").value = this.getField("Source1").valueAsString;
      this.getField("Target2").value = this.getField("Source2").valueAsString;
      this.getField("Target3").value = this.getField("Source3").valueAsString;
      this.getField("Target4").value = this.getField("Source4").valueAsString;
      this.getField("Target1").readonly = true;
      this.getField("Target2").readonly = true;
      this.getField("Target3").readonly = true;
      this.getField("Target4").readonly = true;
  }
  

• YouTube load black screen for the first five seconds

  As of the beginning of January 2013 in Firefox, videos YouTube are responsible as empty black screens for the first five seconds. 0:06 mark, video begin to play normally. This isn't a problem in Chrome or IE. Tested with all plug-ins and Add-ons disabled (except Flash player). Plug-ins/add-ons custom updated. Tried to reinstall Firefox without solution. Help? Thank you!

  You can check the problems caused by the recent updates of Flash and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• Oscilloscope for the acquisition of data from the usb-6009 or - example of temporal division for 5 seconds, 10 seconds

  Hey Hey everyone

  I was looking for an example for two-channel oscilloscope virtual using e/s all-in-one of the 14 bits of NI DAQ USB 6009. I tried to research for example BOF time division or s/div for 1 second, 5 seconds, 10 seconds.  but was shocked to find that there is no reference for it. The range of oscilloscoper virtual

  Minimum - 10 micro s / div maximum -10milli second div but there is no example for 1 second / div or 5 seconds / div...  If anyone can guide me. I'm new to labview environment.

  This is the oscilloscope two sample obtained from google search. is there material limitations. ?

  I'm working on continuous 4-channel data acquisition data acquisition using niusb 6009

  The sampling frequency is sufficient for any desired s/div. The sample rate is 12 ksamples / s per channel, so if that meets the Nyquist criteria for the input signal, you can capture it. The number of samples has no effect on that with the exception of the amount of the signal you acquire. Your chart is not stable, if you do not trigger the acquisition. Even as real significance, therefore your emulation seems actually successful.

• DASYLab how to write data to a file every 15 minutes

  Hi all

  I use dasylab and datashuttle/3000 to record data. What I want to do is to write data to a file every 15 minutes. I use the milti-file, which can write data to the file diffenret, but how do I control the timing, as the journal data every 15 minutes automatically.

  The other problem is that I use FFT analysis of the frequency spectrum. How can I determine the value of frequency where the peaks that happens.

  Thank you

  Write less data in the file that you have collected requires the reduction of certain data.

  There are three techniques to consider.

  With an average or an average of block - both reduce the data by using a function of averaging, defined in the module. To accomplish the reduction of data, choose block or RHM mode in the dialog box properties, and then enter the number of samples/data values that you want to reach on average.

  Average - when you reduce the data, you also should reblock data using the block length of the change in the output parameter. For example if you enjoy at 100 samples/second with a block size of 64, the average module configured on average, more than 10 samples will take 10 times longer to fill a block. The initial block represent 0.64 seconds, the output block represent 6.4 seconds at a sampling rate of 10 samples/second. If you change the size of output in one block, the program remains sensitive.

  Average block - average values in a block against each subsequent block, where the average is based position. The first samples are averaged, all second samples are average... etc. The output is a block of data, where each position has been averaged over the previous blocks. This is how you will be an average data FFT or histogram, for example, because the x-axis has been transformed in Hz or bins.

  Second technique - separate module. This allows to reduce the data and the effective sampling rate jumping blocks or samples. For example, to reduce the data in 1000 samples / second to 100 samples per second, configure the module to keep a sample, jumping 9, keep one, jumping 9, etc. If you configure to skip blocks, you will not reduce the sampling frequency, but will reduce the overall amount of data in a single block 9, for example. It is appropriate for the FFT data or histogram, for example, to have the context of the correct data.

  Finally, you can use a relay and a synchronization module module to control. For example, to reduce a sample data every 15 seconds, configure a generator module of TTL pulses for a cycle of 15 seconds of time. Connect it to a Combi trigger module and configure it to trigger on rising and stop the outbreak directly, with a trigger value after 1. The trigger output connects to the X of the relay command input.

  In addition to these techniques, you can change the third technique to allow a variable duration using a combination of other modules.

  Many of these techniques are covered in the help-tutorial-Quickstart, as the data reduction is one of the most frequently asked questions.

  In regards to the FFT... use the module of statistical values in order to obtain the Maximum and the Max Position. The Position of Max will be the value of the frequency associated with the Maximum value. The output of the statistics module is a single sample per block. Look at the different FFT sample installed in the worksheet calculation/examples folder.

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.
  

• I need my Vi to save only one point of data every 30 seconds

  Hello

  I have trouble getting my VI to make only one point of data every 30 seconds. I collect a couple and the temperature. If you take a look at the queue of lvm, you will see that I have two data points every 30 seconds. I want only the VI to take one. I can do this by going to the DAQ assistant and change the mode of acquisition of N samples 1-sample (on request), but if I do this I am not able to see my couple of graph in real time.  In addition the VI takes data about every 30 seconds. Is there a way I can strengthen this also?

  1. change your graph of couple to be a graph.  A graph has a history associated with him, so he keeps old values in a circular buffer for you.  A chart shows just the last thing written in it.

  2. change your sample of Compression to be 64.  It is currently set at 30, which means that you will end up with 2 samples in your data.  That's why you write 2 samples when write you it.

• How constantly write data in a txt file

  Hello
  first of all, sorry for the bad English, but I have a problem to write data continuously to the txt file... I have a chart 2D with values based 2 sliders (sliders values) and some functions I want to interpolate the value by using the bilinear method... and after that the value of the sliders, interpolated value and the value of the closest points, I want to write to a file txt... for every 2-3 seconds perhaps, it would be ideal to be formatted as ::
  x y f f1 f2 f3 f4
  ..   ..  .. . .. .   ..   ...  . ..
  ... ...  ..    ...   ...   ...   ...

  but... first of all I have a problem with writing data, because every time he deletes old data and simply write a new and it is not horizontal... I am very very new to this (it's obvious) and any help will be very grateful 
  Thank you

  

  Diane beat me to it, I made a few changes to your code, so I'll post it anyway.

  

  As proposed, please go through the tutorials.

  I added an entry to the worksheet at the end node just to show it can be done at the end so. Table of building on a while loop is not very efficient memory, but it's just to show you what can be done. If you plan to go this route, initialize an array and use the subset to the table replace.

  All the best.

• event data for the asynchronous timer

  My application uses an asynchronous timer to read analog and digital signals that are then loaded in a thread safe queue. The main part of the application unloads the queue, displays values and updates the locations of graph and also writes data to a file on disk.

  Asynchronous timer runs every 40 millisecs, show various updates run 5 times per second and the data is written to a file every second.

  Among the data elements is an entry SSI of lifting height, which, at this data rate should be increased to 25mm per second, or 1 mm each scan. I get a lot of variations in this reading, ranging from 0.3 mm to 1.7 mm and these variations seem to occur during updates of the display or the data file is written. I thought that using the async timer I would be safe from Windows Update problems, it runs in a separate thread.

  An earlier version used a timer Panel in which I was able to use the event data to show that timer interruptions were indeed affected by the activity of the screen. The async timer event data seem to zeros, whereas the event data of timer Panel that held a version of the hour and the time elapsed since the last interruption of the timer. How can I check that the async timer is interrupted at the right time?

  Reminder timer Asyncronus has the same exact structure of the timers UIR one, except for the first parameter, an integer that in the reminder timer UIR, holds the handle of the Panel the timer while it is reserved in the callback of the asynchronous timer. This means that the eventData parameter holds the information on the time elapsed in th eprogram, passed as pointers to values double. To read this information, you must operate this way:

  totalTime double, timeFromLastTimer;

  totalTime = *(double *) eventData1;      Time to start the program

  timeFromLastTimer = *(double *) eventData2;     The last reminder of timer time

• First Flash Player in FireFox after start total Casuses freeze except excessive action HD for 5 seconds

  Especially anytime I boot vista and use firefox to load the first page of interest of any Flash Player on this page, the Computer freezes.

  My mouse to tail (on the screen) will have multiple pointers, showing that the action of the mouse on the screen's show and then suddenly stops leaving the mouse pointers of 4-5 spread on the screen.

  When I say freeze, I want to say keyboard does not work, no option to see taskmanager, possible extra mouse no movement, no keys work.

  Then, it does nothing except totals action HD for several seconds (5) and then after that, everything is ok.

  I took the time that this has happened (looking clock screen) and returned with a search for the Explorer for the date and time to find all the files that had we created or modified during this time - nothing has changed - so the other question is how is it, nothing has changed when my HD was going ballistic (solid green light)?

  Since then I uninstalled FP in FF and removed my computer adobe.

  Thank you for your interest

  Upgrade to Firefox (26)

• I sent 2 SMS to the iPhone even from the same location 1 hour out. Why I was charged for the second message, but not the first?

  I sent 2 SMS on the phone even in the same place 1 hour apart. I was charged for the second message, but not the first. Why charge me? I was under the impression that the messages sent between iPhones are free?

  I was under the impression that the messages sent between iPhones are free?

  It's a little more complicated than that.

  If the message is sent as an iMessage (blue) uses the data that could be part of your cellular data allowance or WiFi depending on what you are connected to. If it is sent as SMS (green) it takes however your carrier charges you for SMS.

  For a message to be sent in an iMessage, both parties need to have a device capable of iMessage (e.g., iPhone, iPad, Mac), iMessages allowed to have (settings > Messages > iMessage > on) and be connected to the data (Wifi or cellular).