Writeback error

Similar Questions

• OBIEE 11 g writeback error

  
  Hello

  I created writback report long back. Recently, I added the condition for the model of writing deferred and also re-arranged columns. Now, the report is to give

  The system failed to generate appropriate SQL. Please contact your system administrator.

  SQL and XML in the generated error window works as expected.

  Someone please help me out here.

  Thank you

  prassu

  I added a column in the XML model where the clause that is hidden in the report, so that it cause error and writeback does not work. So I have to UN-hide the column and now it's working fine now.

  Thank you

  prassu

• Error "Writeback" Equium CD/DVD

  I have a strange problem with my laptop that I discovered when creating backups of the system.

  If you have a couple of commercial programs "partition of Eve", which appeared on the CD magazine and they work very well, even when that means writing several DVD. However, the partition of all of the backup system isn't ideal!

  If I try to use the standard (for the designated etc. Folders Backup) backup program, everything goes OK until a few hundred MB have been recorded, and then the process fails with an error "writeback". I tried seveal programs, all with the same result.

  I looked for references of this error - but they all seem to refer to hard disks. Has anyone encountered this writing on CD or DVD?

  The system uses a carpet * a UJ-820 s by car.

  Thanks in advance,

  Phil

  Hi Phil,

  I have experienced this error so that my system backup on an external hard drive USB connected. The error is the same, I use Norton Ghost or Acronis True Image.

  I finally took it down to a bad USB connection on my external caddy causing intermittent contact when the external hard drive was running (vibrations, I think).

  The fact that you tried different applications with the same result would indicate a physical problem rather than a software problem.

  I presume that your carpet * a car is equipped internally in which case I suggest to check that it is securely installed, and then check that it is trying to write data at high speed for the media type you are using.

  If you have Nero installed, you can also try to set the write speed for your DVD player to a setting below using Nero Divespeed.

  Kind regards

• Writeback OBIEE Sax parser error expected with ampersand gt/lt entity name

  Hello
  I activated OBIEE 10.1.3.3.2 on Suse Linux 9.x writeback successfully for an OBIEE report, however if one of the fields contains XML special characters such as the ampersand, lower to higher symbols etc. When I save I get error:
  An error occurred writing to the server. Please check that you have entered the proper values. If the problem persists, contact your system administrator.
  SAX parser returned an exception. Message: Name of entity expected to reference, entity publicId:, systemId entity:, line number: 1, number of column: 795
  Error details
  Error codes: UH6MBRBC:E6MUPJPH
  XML parsed: writeBack model = "entry" > < record action = "Refresh" > < value columnID 'c10' = > C < / value > < value columnID = "c2" > Jun-08 < / value > < value columnID = "c5" > 0001 < / value > < value columnID 'c1' = > NET INCOME < / value > < value columnID 'c7' = > T000 < / value > < value columnID 'c3' = > Total X & X < / value >...
  
  I really don't want to have to use the function replace on all fields in the report to remove special characters + train users not to go into the editable field.
  
  Anyone got any ideas how to get around this problem?
  
  Thank you
  Gareth

  10.3.3.4 solves half of this... I don't recal exactly...

  but they added in the writeback.js file, replace a function for two reserved signs ('&' and '<' ).="" they="" didn't="" add="" '="">' and subsequently one - forget that is...)

  If you don't want to upgrade - I would just change the code as they did in 10.3.3.4 - it's easy...

• I get an error of writeback failed after receiving updates or get new files yellow exclamation point in the icon 'son to the right of the screen.

  I must also click DELETE to restart the computer to retrieve the screen and the screen will show also 8-10 writing failure before going to the browser

  What update, the exclamation yellow on which icon, any error message.

  error message in Event Viewer can help.
  http://help.artaro.EU/index.php/Windows-XP/essential-administration-XP/Event-Viewer-XP.html

• Error writeback in a text field

  If I use this for a no text on the ground it works!...
  Update <>UPDATE D_EXEC_METRIC SET 'EXEC_METRIC_ICON_WID' = @{c3} WHERE ' SECTOR_WID"=@{c0} AND" EXEC_METRIC_WID"=@{c2} < / update >»»
  
  If I use this for a text field
  {{{< update > UPDATE D_EXEC_METRIC SET EXEC_METRIC_COMMENT='@{C7}' WHERE the SECTOR_WID=@{c0} AND EXEC_METRIC_WID=@{c2} < / update >
  
  Get this error message
  Write back error the system could not generate appropriate SQL. Please contact your system administrator.
  Error details
  {{{Model: ' UPDATE D_EXEC_METRIC SET EXEC_METRIC_COMMENT='@{C7}' WHERE SECTOR_WID=@{c0} AND EXEC_METRIC_WID=@{c2}'
  
  Record: "< record action ="Refresh"> < value columnID = 'c0' > 6 < / value > < value columnID ="c5"> VAN TL < / value > < value columnID 'c6' = > RECIPES/TRUCK/DAY < / value > < value columnID ="c2"> 1 < / value > < value columnID = 'c3' > 4 < / value > < value columnID 'c7' = > test < / value > < / record > '"
  
  If anyone can HELP please!... Thanks in advance
  
  Published by: user649011 on September 18, 2009 10:15

  Attention with the capital letter in the identifier column. {C7} must be {c7}.

  Try using this:

  UPDATE D_EXEC_METRIC SET EXEC_METRIC_COMMENT='@{c7}' WHERE SECTOR_WID=@{c0} AND EXEC_METRIC_WID=@{c2}
  

  See you soon
  Nico

• Print the error message when you try to print from a Vista network printer

  I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.

  What should I do to fix this?

  Thanks in advance,

  Hi Hydnah45,

  ·         When exactly do you get this error?

  ·         You have windows XP INSTALLED on your computer?

  Try these steps if you have windows XP INSTALLED on your computer.

  Step 1

  To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.

  To disableActivate the disk write cache, follow these steps:

  1. click onStartand then click my computer.

  2. right click on the hard drive, and then clickProperties.

  3. click on thehardware tab.

  4. Click to select the hard drive, and then clickProperties.

  5. click on thepolicies tab.

  6 clear the boxenable the disk write cache , and then click OK.

  7. clickOK to close the disk Local (c) properties dialog box.

  8. Repeat steps 3 through 5 for each hard disk that is installed on your computer

  Step 2

  Make changes in the registry

  1. start the registry editor.

  2. Locate and then click theenablesecuritysignature under the following key value in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters

  3. on theEdit menu, click modify.

  4. in thedata value: box, type 0, and then click OK.

  5. exit the registry editor.

  6. stop and restart the service server,or restart the computer

  Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you have windows 7 installed on your computer try running printer utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I hope this works.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• system cannot read the model of writeback

  Hi all

  I have tables A and B. I have activated the writeback table A.

  My requirement is when I enter the value in the table A new value will be updated in table B.

  <? XML version = "1.0" encoding = "utf-8"? >

  < WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1" >

  < WebMessageTable = lang "" en - us "system ="WriteBack"table = 'Messages' >"

  < name informed = "writeback" >

  < XML >

  < writeBack connectionPool = "Connection pool" >

  < Insert > < / insert >

  Update <>UPDATE XX_TEST SET amount=@3 WHERE PERIOD='@2' AND AMOUNT_TYPE = 'PG' < / update >

  < / writeback >

  < / XML >

  < / Informed >

  < / WebMessageTable >

  < / WebMessageTables >

  while trying to update the values, I get the following error

  "The system is unable to read the writback"writeback"model. Contact your system administrator.

  Please guide me.

  Thank you

  I placed the writeback.xml in the following way.

  C:\obiee11g\Oracle_BI1\bifoundation\web\msgdb\customMessages

  
  

  Thank you
  

• Error in Write Back functionality in OBIEE 10 g

  Hello
  
  
  I get following error when I tried to implement the function write back...
  
  
  
  An error occurred writing to the server. Please check that you have entered the proper values. If the problem persists, contact your system administrator.
  ODBC driver returned an error (SQLExecDirectW).
  
  Error details:
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 27024] The EXECUTE PHYSICAL statement must specify a physical SQL statement to execute. (HY000)
  SQL issued: PERFORM PHYSICAL CONNECTION POOL CP COMMIT
  
  
  My xml model is
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1" >
  < WebMessageTable = lang "" en - us "system ="WriteBack"table = 'Messages' >"
  < name informed = "WRITEBACK" >
  < XML >
  < writeBack connectionPool = "Connection pool" >
  {< Insert > UPDATE WRITE_BACK_TEST SET EXPLAINATION='@{c1}' WHERE the SQ_NUM=@{c0} < / insert >
  {< Updated > updated the VALUE WRITE_BACK_TEST EXPLAINATION='@{c1}' WHERE the SQ_NUM=@{c0} < / update >
  < postUpdate > COMMIT < / postUpdate >
  < / writeback >
  < / XML >
  < / Informed >
  < / WebMessageTable >
  < / WebMessageTables >
  
  
  
  I even changed the instance configuration file by adding a real entry < LightWriteback > < / LightWriteback >
  
  
  
  
  Let me know where I did wrong
  
  
  
  Thank you
  
  Published by: 991740 on March 25, 2013 14:20

  Try these
  1. remove the VALIDATION of the SQL statement.
  2. let the empty insert with a space, for example:.
  

  Reference: http://docs.oracle.com/cd/E12103_01/books/AnyWebAdm/AnyWebAdm_Dashboard17.html

  If brand aid

  Published by: Srini VIEREN on March 25, 2013 16:13

• HOWTO disable writeback = flashcacheMode

  Hello
  
  I am trying to turn off the flash new write cache feature that came with the last patch Exadata on our neighborhood CARS X 2 - 2
  The procedure that I follow is described below:
  
  1 CellCLI > change the cell flashcache all RAS
  
  2 CellCLI > drop flashcache
  
  3 CellCLI > change the cell stop services cellsrv
  
  4 CellCLI > change the flashCacheMode = Writethrough cell
  
  5 CellCLI > change the startup services cellsrv cell
  
  My problem is that when I'm running 1. I get a syntax error.
  The doc only I could find that describes how to get back the writeback mode is
  
  http://www.unitask.com/oracledaily/2012/10/01/Exadata-X3-11-2-3-2-and-Oracle-Platinum-Services-2/

  968901 wrote:
  Hello

  I am trying to turn off the flash new write cache feature that came with the last patch Exadata on our neighborhood CARS X 2 - 2
  The procedure that I follow is described below:

  1 CellCLI > change cell flashcache all RAS

  2 CellCLI > drop flashcache

  3 CellCLI > change cell stop services cellsrv

  4 CellCLI > change the flashCacheMode = Writethrough cell

  5 CellCLI > change cell starting services cellsrv

  My problem is that when I'm running 1. I get a syntax error.
  The doc only I could find that describes how to get back the writeback mode is

  http://www.unitask.com/oracledaily/2012/10/01/Exadata-X3-11-2-3-2-and-Oracle-Platinum-Services-2/

  ALTER FLASHCACHE ALL RAS

• Writeback REG OBIEE

  Hello
  
  
  I learn OBIEE 10 g.
  I'm working on the writeback option.
  
  I got the error
  
  The system is unable to read write back model "wb". Please contact your system administrator.
  
  I created the BM model as
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < WebMessageTables xmlns:sawnm="com.siebel.analytics.web/message/v1" >
  < WebMessageTable = lang "" en - us "system ="WriteBack"table = 'Messages' >"
  < name informed = "wb" >
  < XML >
  < WriteBack connectionPool = "con_pol" >
  < Insert > < / Insert >
  {< updated > updated CHANNELS RULES CHANNEL_CLASS_ID={@c1} WHERE CHANNEL_ID={@c0} < / update >
  < postUpdate > COMMIT < / postUpdate >
  < / writeback >
  < / XML >
  < / Informed >
  < / WebMessageTable >
  < / WebMessageTables >
  
  I placed him in this path 'D:\OracleBI\web\msgdb\customMessages '.
  
  Granted privileges WRITE BACK to the DATABASE, MANAGE writeback to the user in the RESPONSES.
  Created the TABLE view with CHANNEL_ID, CHANNEL_CLASS_ID in the ANSWERS.
  Writeback enabled
  with the model wb
  define the interaction of value type = writeback with the field size = 16.
  
  Any solution please.
  
  Thank you.

  Check that the table has a column constraint not null.

  After that, 1 try more :)

  Put this,

  
  
  

  
  
  
  
  {{UPDATE of CHANNELS SET CHANNEL_CLASS_ID=@{c1} WHERE CHANNEL_ID=@{c0}
       ENGAGE     
  
  
  

  
  

  If not, then once see the steps as in this URL and the Coachman.

  http://download.Oracle.com/docs/CD/E12096_01/books/AnyWebAdm/AnyWebAdm_Dashboard14.html#wp1018234

  Published by: 855532 on May 19, 2011 01:34

• OBIEE 10 g rewrite error when inserting

  Hello
  
  
  Im getting an error when trying to write a column in the oracle database.
  
  Error details
  
  An error occurred writing to the server. Please check that you have entered the proper values. If the problem persists, contact your system administrator.
  ODBC driver returned an error (SQLExecDirectW).
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 27024] The EXECUTE PHYSICAL statement must specify a physical SQL statement to execute. (HY000)
  Publ. SQL: RUN the POOL of CONNECTIONS PHYSICAL orcl
  
  
  
  XML has published
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1" >
  < WebMessageTable = lang "" en - us "system ="WriteBack"table = 'Messages' >"
  < name informed = "WriteBack" >
  < XML >
  < writeBack connectionPool = "orcl" >
  Of < insert > INSERT INTO writebackasim (name) values (@{c1}) < / insert >
  < updated > < / update >
  < / writeback >
  < / XML >
  < / Informed >
  < / WebMessageTable >
  < / WebMessageTables >
  
  
  
  Help me please...

  Aswin,

  Remove him postcommit and try again. I think that's the problem
  You DB supports automatic validation if you have to add it.

  Concerning
  Adil

• Write back error

  Hello
  
  I update the table using OBIEE rewrite Option...
  
  I am facing this error,
  An error occurred writing to the server. Please check that you have entered the proper values. If the problem persists, contact your system administrator.
  ODBC driver returned an error (SQLExecDirectW).
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43093] An error occurred when processing the statement EXECUTE PHYSICS. [nQSError: 17001] Oracle error code: 911, message: ORA-00911: invalid character in the OIC call OCIStmtExecute: update reports. UTL_BU the value UTL_BU.Complete = 'A', UTL_BU. BU = 'Non-compulsory' where UTL_BU. BU_ID = 20;. [nQSError: 17011] Execution of the SQL statement failed. (HY000)
  Publ. SQL: RUN the POOL of CONNECTIONS PHYSICAL 'Pool of connections' update reports. UTL_BU the value UTL_BU.Complete = 'A', UTL_BU. BU = 'Non-compulsory' where UTL_BU. BU_ID = 20;
  
  Please, let me know what should I do to make this suucessful of writeback.
  
  Thanks for your help.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43093] An error occurred when processing the statement EXECUTE PHYSICS. [nQSError: 17001] Oracle error code: 911, message: ORA-00911: invalid character in the OIC call OCIStmtExecute: update reports. UTL_BU the value UTL_BU.Complete = 'A', UTL_BU. BU = 'Non-compulsory' where UTL_BU. BU_ID = 20;. [nQSError: 17011] Execution of the SQL statement failed. (HY000)

  Can yo remove the colon semi at the end of the Update statement and check once. Remove the semi colon to the model itself, and restart services.

  Kind regards
  Sandeep

• Lines of writeback updated miltiple

  Hi all
  I am currently implemented only writeback update. Update does not work well, I am able to edit the existing values for single record/line.
  
  When I try to change values for multiple records and submit the return entry button I get an error, I know - is this possible/allowed to update multiple Records updates?
  
  I would like to be more specific about the error here:
  When I try to change an existing value for a line, say Value1 to Value2 col1, it works. But when the column is NULL and when I try to update with value I get the error I posted.
  
  
  Thank you
  Yar.
  
  Published by: Yar on November 16, 2009 09:33

  Fill
  
  with the same update statement.

• Error writing back then that he was trying to update the data

  It's my writeback.xml file*.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1" >
  < WebMessageTable = lang "" en - us "system ="WriteBack"table = 'Messages' >"
  < informed name = "UpdateBA" >
  < XML >
  < writeBack connectionPool = 'Pool of Oracle Data Warehouse connections' >
  < Insert > < / insert >
  < Update > update the VALUE XXAUD_W_BUD_QTA_F BUDGET_AMT=@{c19},attribute2='@{c15}'
  {where INTEGRATION_ID='@{c6}' < / update >
  < / writeback >
  < / XML >
  < / Informed >
  < informed name = "UpdateQA" >
  < XML >
  < writeBack connectionPool = 'Pool of Oracle Data Warehouse connections' >
  < Insert > < / insert >
  < Update > update the VALUE XXAUD_W_BUD_QTA_F QUOTA_AMT=@{c21},ATTRIBUTE3='@{c18}'
  {where INTEGRATION_ID='@{c6}' < / update >
  < / writeback >
  < / XML >
  < / Informed >
  < informed name = "UpdateFA" >
  < XML >
  < writeBack connectionPool = 'Pool of Oracle Data Warehouse connections' >
  < Insert > < / insert >
  < Update > update the VALUE XXAUD_W_FORECAST_F FORECAST_AMT=@{c19},attribute1='@{c22}'
  {where INTEGRATION_ID='@{c15}' < / update >
  < / writeback >
  < / XML >
  < / Informed >
  < name informed = "UpdatePO" >
  < XML >
  < writeBack connectionPool = 'Pool of Oracle Data Warehouse connections' >
  < Insert > < / insert >
  {< Updated > updated the VALUE XXAUD_W_SALESLOGIN_DTL ACTIVE_FLG='@{c2}' WHERE the RESOURCE_ID=@{c1} < / update >
  < / writeback >
  < / XML >
  < / Informed >
  
  < informed name = "UpdateRET" >
  < XML >
  < writeBack connectionPool = 'Pool of Oracle Data Warehouse connections' >
  < Insert > < / insert >
  < Updated > UPDATE XXAUD_W_RET_TARGET_F SET JUL_RET_TAR=@{c3},AUG_RET_TAR=@{c4},SEP_RET_TAR=@{c5},
  OCT_RET_TAR=@{C6},NOV_RET_TAR=@{C7},DEC_RET_TAR=@{C8},JAN_RET_TAR=@{C9},FEB_RET_TAR=@{C10},
  MAR_RET_TAR=@{C11},APR_RET_TAR=@{C12},MAY_RET_TAR=@{C13},JUN_RET_TAR=@{C14}
  {WHERE INTEGRATION_ID='@{c0}' < / update >
  < / writeback >
  < / XML >
  
  
  obtaining put up-to-date at any given time, but when I tried to update after a while I get the error message
  
  can you please tell me the reason for this?
  
  
  
  
  
  * An error occurred writing to the server. Please check that you have entered the proper values. If the problem persists, contact your system administrator.
  SAX parser returned an exception. Message: Name of entity expected to reference, entity publicId:, systemId entity:, line number: 1, number of column: 344 *.
  
  Error details
  Error codes: UH6MBRBC:E6MUPJPH
  Analyzed: < XML model writeBack = "UpdateQA" > < record action = "Refresh" > < value columnID 'c6' = > ICS_US ~ 1721 ~ 15041 ~ 1 ~ 2009 ~ 135 < / value > < value columnID = "c7" > 2009 < / value > < value columnID = "c13" > 2009 / 01 < / value > < value columnID = "17" > specialty < / value > < value columnID = "c15" > Carroll , Patrick < / value > < value columnID = "16" > SALES_PERSON < / value > < value columnID = 'c12' > 1st Auto & Casualty Insurance < / value > < value columnID = "c11" > ICS_US < / value > < value columnID = "c21" > 3334 < / value > < value columnID = 'c18' > as < / value > < / record > < record action "Refresh" = > < value columnID 'c6' = > ICS_CAN ~ 1438 ~ 15454 ~ 1 ~ 2009 ~ 135 < / value > < value columnID = "c7" > 2009 < / value > < value columnID = "c13" > 2009 / 01 < / value > < value columnID = "17" > specialty < / value > < value columnID = "c15" > Barrette, Denis (Denis) < / value > < columnID = 'c16' value > SALES_PERSON < / value > < value columnID = 'c12' > AXA Insurance < / value > < value columnID = "c11" > ICS_CAN < / value > < value columnID = "c21" > 147 < / value > < value columnID = 'c18 '. > fg < / value > < / record > < / writeback >

  Hi Varanasi,

  I also hit problem of special characters. New message for this here:
  Writeback OBIEE Sax parser error expected with ampersand gt/lt entity name

  Kind regards
  Gareth