WRT 1200AC speed Test does not

Similar Questions

• After BIOS update Intel speed step does not not on Satellite A500

  I upgraded my Satellite A500 PSAM3E model to the most recent BIOS 1.50, now the Intel speed step does not!

  My CPU is always 2 GHz +, I have chagned power Plan to balanced, but no change... with precedent the CPU was about 800 MHz.
  When I try to change the Windows 7 power management and set the maximum CPU at 50 or 80% performance, the system hangs.

  Hey Szaby59,

  What older BIOS version were you using before update to 1.50?

  I also use maximum CPU performance option for ecomode (50%), but it does not work properly.

  In addition, it would be interesting to know if use you your own Windows installation or factory settings. Normally, after using the Toshiba Recovery disk you don t have install Toshiba tools more. Everything is preinstalled on your laptop.

• Jdev - query Tester does not work

  Jdev Version: 11.1.1.7.1

  The query VO on my Jdev Tester does not work. More importantly on my your Expert mode, when I add a new column to SQL, the attributes do not automatically get added to the VO. Only clue I have is the bottom of the stack trace that is thrown when I click on "Query Builder" (other buttons as Test donot throw any error and no success message):

  java.lang.NullPointerException

  at oracle.javatools.db.jdbc.JdbcDDLDatabase.registerBuilders(JdbcDDLDatabase.java:453)

  to oracle.javatools.db.AbstractDatabase. < init > (AbstractDatabase.java:85)

  to oracle.javatools.db.ddl.DDLDatabase. < init > (DDLDatabase.java:50)

  to oracle.javatools.db.jdbc.JdbcDDLDatabase. < init > (JdbcDDLDatabase.java:74)

  at oracle.javatools.db.jdbc.JdbcDatabaseFactory.createDatabaseImpl(JdbcDatabaseFactory.java:35)

  at oracle.javatools.db.DatabaseFactory.createDatabaseImpl(DatabaseFactory.java:241)

  at oracle.javatools.db.DatabaseFactory.createStandaloneDatabase(DatabaseFactory.java:344)

  at oracle.javatools.db.DatabaseFactory.findOrCreateDatabase(DatabaseFactory.java:326)

  at oracle.jbo.dt.jdevx.ui.view.XVOQueryBuilder.createDatabase(XVOQueryBuilder.java:273)

  at oracle.jbo.dt.jdevx.ui.view.XVOQueryBuilder.invokeQueryBuilder(XVOQueryBuilder.java:56)

  at oracle.jbo.dt.jdevx.ui.JdxMenuManager.invokeQueryBuilder(JdxMenuManager.java:1615)

  at oracle.jbo.dt.ui.view.VOClausePanel.queryBuilderAction(VOClausePanel.java:2440)

  at oracle.jbo.dt.ui.view.VOClausePanel.actionPerformed(VOClausePanel.java:1390)

  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)

  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)

  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)

  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)

  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)

  at java.awt.Component.processMouseEvent(Component.java:6289)

  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)

  at java.awt.Component.processEvent(Component.java:6054)

  at java.awt.Container.processEvent(Container.java:2041)

  at java.awt.Component.dispatchEventImpl(Component.java:4652)

  at java.awt.Container.dispatchEventImpl(Container.java:2099)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)

  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)

  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)

  at java.awt.Container.dispatchEventImpl(Container.java:2085)

  at java.awt.Window.dispatchEventImpl(Window.java:2478)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:85)

  in java.awt.EventQueue$ 1.run(EventQueue.java:603)

  in java.awt.EventQueue$ 1.run(EventQueue.java:601)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)

  in java.awt.EventQueue$ 2.run(EventQueue.java:617)

  in java.awt.EventQueue$ 2.run(EventQueue.java:615)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)

  in java.awt.Dialog$ 1.run(Dialog.java:1046)

  in java.awt.Dialog$ 3.run(Dialog.java:1098)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.awt.Dialog.show(Dialog.java:1096)

  at java.awt.Component.show(Component.java:1585)

  at java.awt.Component.setVisible(Component.java:1537)

  at java.awt.Window.setVisible(Window.java:842)

  at java.awt.Dialog.setVisible(Dialog.java:986)

  at oracle.jbo.ui.main.JboDialog.setVisible(JboDialog.java:130)

  to oracle.jbo.ui.wizard.JboWizard$ MddWizardDialog.setVisible (JboWizard.java:2558)

  at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)

  at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)

  at oracle.jbo.ui.main.JboDialog.showDialog(JboDialog.java:108)

  to oracle.jbo.ui.wizard.JboWizard$ MddWizardDialog.showDialog (JboWizard.java:2494)

  at oracle.jbo.ui.wizard.JboWizard.createMddWizard(JboWizard.java:550)

  at oracle.jbo.ui.wizard.JboWizard.setVisible(JboWizard.java:353)

  at oracle.jbo.ui.wizard.JboWizard.showDialog(JboWizard.java:331)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.showEditSqlDialog(VoeSqlPage.java:625)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.invokeEditSqlDialog(VoeSqlPage.java:592)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.performAction(VoeSqlPage.java:935)

  at oracle.jbo.dt.ui.main.controls.DtcAction.actionPerformed(DtcAction.java:47)

  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)

  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)

  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)

  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)

  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)

  at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:273)

  at java.awt.Component.processMouseEvent(Component.java:6289)

  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)

  at java.awt.Component.processEvent(Component.java:6054)

  at java.awt.Container.processEvent(Container.java:2041)

  at java.awt.Component.dispatchEventImpl(Component.java:4652)

  at java.awt.Container.dispatchEventImpl(Container.java:2099)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)

  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)

  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)

  at java.awt.Container.dispatchEventImpl(Container.java:2085)

  at java.awt.Window.dispatchEventImpl(Window.java:2478)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:85)

  in java.awt.EventQueue$ 1.run(EventQueue.java:603)

  in java.awt.EventQueue$ 1.run(EventQueue.java:601)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)

  in java.awt.EventQueue$ 2.run(EventQueue.java:617)

  in java.awt.EventQueue$ 2.run(EventQueue.java:615)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  Any idea on what could be the problem?

  The question seems to be to the JDBC data source that we define in the configuration Module of the Application screen. We have a JNDI to data source, and somehow at design time, the your do not work with it. Currently, I change that to a local data source, the tester of VO, requeteur all work fine.

• cache 'dist-test' does not support direct optimization

  I noticed this message in the log of my proxy Extend JVM. It is registered at the INFO level.
  
  The cache dist-test does not support direct optimization for objects in internal format. If possible, consider using a different cache topology.
  
  The Extend JVM proxy runs as a disabled storage for the cluster node.
  
  Any ideas what is the cause?
  
  Dist-test is configured like this:

    <caching-scheme-mapping>
  
      <cache-mapping>
        <cache-name>dist-*</cache-name>
        <scheme-name>near-entitled-scheme</scheme-name>
      </cache-mapping>
  
    </caching-scheme-mapping>
  
    <caching-schemes>
  
      <near-scheme>
        <scheme-name>near-entitled-scheme</scheme-name>
        <front-scheme>
          <local-scheme>
            <eviction-policy>HYBRID</eviction-policy>
            <high-units>1000</high-units>
          </local-scheme>
        </front-scheme>
        <back-scheme>
          <distributed-scheme>
            <scheme-ref>dist-default</scheme-ref>
          </distributed-scheme>
        </back-scheme>
      </near-scheme>
  
      <distributed-scheme>
        <scheme-name>dist-default</scheme-name>
        <serializer>
          <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
        </serializer>
        <lease-granularity>member</lease-granularity>
        <backing-map-scheme>
          <local-scheme>
            <listener>
              <class-scheme>
                <class-name>{backing-map-listener-class-name com.oracle.coherence.common.backingmaplisteners.NullBackingMapListener}</class-name>
                <init-params>
                  <init-param>
                    <param-type>com.tangosol.net.BackingMapManagerContext</param-type>
                    <param-value>{manager-context}</param-value>
                  </init-param>
                </init-params>
              </class-scheme>
            </listener>
          </local-scheme>
        </backing-map-scheme>
        <autostart>true</autostart>
      </distributed-scheme>
  
    </caching-schemes>

  I presume it's something to do with the plan closely because I don't see the message if I have the card dist-* caches directly to the dist - default scheme
  
  See you soon,.
  JK.

  Hi Jonathan,.

  You've found the warning as a near cache implements cache objects. Given that the service proxy uses POF, it must deserialize the POF serialized value in order to put it in the cache close. You do not see the message when you cache directly plan dist by default because it is configured to use the BOOM, allowing the proxy service pass the POF serialized value directly through the distributed cache service.

  Thank you
  Tom

• Speed dial does not work with Firefox 5 under Windows 7; How can I down Firefox 4.1?

  Speed dial Extension does not work for Firefox 5 under Windows 7.

  How can I downgrade to Firefox 4.1 so that I can use this indispensable Extension?

  This link will be fix Fast Dial for Firefox 8.0.1

  http://DL-Web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-FX.xpi

• The playback speed feature does not work when playing TV recorded in Media Player.

  Problem of reading speed in WMP with WMC video...

  When I try to use the functionality of reading speed in Win MediaPlayer on a video I recorded with Win Media Center, it does not work.  How this feature can be disabled on a registered windows video?

  Thank you

  Hello

  • What is the format of the file you are trying to play?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-playback-speed-in-Windows-Media-Player

  You can also try to update the video card drivers and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• First to speedgrade, speed grade does not start and crashes

  SpeedGrade does not at all since the upgrade by 2014. Whenever I select the option to go to the speed in the first category, it blocks as well.

  I get this error from beginning to the top:

  process: sgmacosx [8364]

  Path: / Applications/Adobe SpeedGrade 2014/Adobe SpeedGrade CC 2014.app/Contents/MacOS/sgmacosx CC

  ID: adobe. SpeedGrade

  Version: 8.0.0 (8.0.0)

  Generation information: Adobe SpeedGrade CC 2014-0 ~ 141

  Code type: X 86-64 (Native)

  Parent process: launchd [182]

  Manager: sgmacosx [8364]

  User ID: 501

  Date/time: 12:10:18.910 2014-06-29 + 0200

  OS version: Mac OS X 10.9.3 (13 D 65)

  Report Version: 11

  Anonymous UUID: 7EDB0F71-7D77-BB75-6396-DC31671E417D

  Sleep/wake UUID: 59DB4A46-004E-43D6-8C66-4BCDFF4A1B54

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000020

  Hey all,.

  We have reproduced this crash on our end. most likely, it is related to the MBP / Imac integrated graphics Intel Iris. We are currently investigating this issue and try to provide a fix soon.

  Please, try the following as a workaround:

  -SpeedGrade open (without sending a PR project)

  -Create a new project

  -Open settings (S) and then "read".

  -Select 'Software only' under 'Mercury playback engine.

  -Close in SpeedGrade

  Engine Tuning of reading Mercury to the software should allow you to open a PR project without crashing.

  If this workaround solution does not help, please contact me via a PM

  I hope this helps.

  Thank you.

  Dennis

• InDesign CC test does not

  I have a trial of InDesign CC (2014), but I accidentally deleted my computer off InDesign files. I tried to use the cleaning tool, but InDesign does not appear on the list of apps to clean (no doubt because the files do not exist on my computer). I also tried uninstall and then reinstall the creative cloud desktop application. How to test this work again?

  
  

  
  

  Alexfillip for more information on how to reinstall Illustrator please see CC Office lists of applications as "updated" is not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

• HP TouchSmart 300-1020: buttons HP Support Assistant diagnostic Test does not

  I have HP Support Assistant version 7.7.34.34, which - I think - is the right version for my TouchSmart from HP with Windows 7 64-bit 300-1020.

  When I try to run a diagnostic test (optical drive, USB key, sound card test, test test the printer, hard drive, keyboard, map chart, microphone, mouse), the button snaps (with mouse) for diagnosis, tests do not work.

  Basically... I click on the button for the desired... diagnostic test and nothing happens!

  Troubleshooting apparently buttons function very well... click on one and a convenience store starts.

  What can I do to "solve" the problem of Diagnostics button?  Thank you!

  You are welcome.

  Since your computer is 6 years old, I suggest that perform you a System Recovery.  I do this at least once a year because I like a computer that works like new without any problems.

• How to trigger a MouseEvent to TLF, my test does not work

  Hello

  I met a problem when using the earphone of TLF,

  Inside the TextFlow, I have several paragraphs.

  What I want to accomplish is to raise an event, such as ROLL_OVER, ROLL_OUT event mouse, when my mouse is on one of the paragraphs.

  I used to experiment some time, but never seem to work, just the examples below

  _textFlow.addEventListener (FlowElementMouseEvent.ROLL_OUT, onMouseHandler);

  _textFlow.addEventListener (FlowElementMouseEvent.ROLL_OVER, onMouseHandler);

  that does not work.         I need the answer of the event, so I can handle the paragraph

  onMouseHandler(e:FlowElementMouseEvent):void private function

  {

  trace ("onMouseHandler" + e.type);

  var para: ParagraphElement = e.flowElement.getParagraph ();

  trace (para.textLength);

  }

  Thanks in advance!

  You will need to call getEventMirror on each child of the element ParagraphElement and I have the returned EventDisplatcher adds a MOUSE_OVER listener.  getEventMirror is currently in the namespace tlf_internal.

  Hope that helps,

  Richard

• Test hardware-&gt; Chipset test: does not apply?

  What it means? And how do I take the test?

  (Center Solution Lenovo ThinkPad 8)

  @hemanth_lenovo - I do not think that there is something wrong here, besides the fact that Lenovo solution center software is not the chipset Intel Atom found in the ThinkPad tablets.

  I get the same message 'not applicable' when I run the LSC on my TPT2. See http://1drv.ms/1tMx8KF

  Perhaps Lenovo should update LSC to treat the Atom chips, or clearly in the help text which, despite the warning icon display, there is nothing to worry about...

• XPS15 (L521x). 840evo SSD running at speed SATA2, does NOT speed SATA3.

  I bought a L521x was fitted with a 512 MB SSD, which was a 830 SSD from Samsung manufactured for Dell as equipment of OEM for which software Wizard did not work (IE I never checked before HD speed).

  Recently, I upgraded the original SSD with the Samsung SSD 1 TB 840evo and I started to manage the new SSD with magician. Now the bad news discovered is that, although I was expecting a performance gain:

  (1) the Windows index on the HD has not changed: always 7.7;

  (2) Wizard reports the speed SATA2 instead of the expected to the SATA channel SATA3.

  I know that the intel HM77 chipset supports the SATA3 specification.

  The OS is Windows 7 Ultimate x 64. The boot is via the BIOS (not UEFI). The partition table is the MBR (not GPT). The system is updated with the latest version of the BIOS and latest drivers. Of course replace the HD, I used the original connectors provided by Dell with Notepad.

  What wrong with my setup? In other words: why the SSD running at speed instead of SATA3 SATA2?

  Thanks in advance.

  Antonio

  Reference Dell Germany replied:
  http://www.maxrev.de/was-haltet-IHR-vom-Dell-XPS-15-l521x-t286801, start, 120.htm

  I found information that A16 has developed because there are poblems to the disks that were connected through SATA3 and this is the reason why they wer strangled to SATA2.

  I asked my supervisor... no new version comes out. You can stay with the A14.

  A15 should be fine or any lower version should be fine. Download it from the Dell site. The software allows a drop in ratings.

• External scan test does not pass---(E-disque DUR-004)

  After testing my hard drive, I got this message: "external scan test not past-(E - disk HARD-004) =

  = If you please run Check Disk to recover the sector hurt-(E - disk HARD-005) ='

  How can I fix it? Is there a serious problem with my hard drive?

  Hi kimtien,

  Welcome to the community of Sony!

  Is this E - disk HARD-004 the result for the chkdsk scan?

  This result shows a bad sector on the hard drive. You need to defragment the unit. Run defrag will eliminate windows to use these bad sectors and to mark it to avoid any cause of lost data by the defective sector.

  Yes, it is serious because it has errors during each test. This usually means a defective hard drive, we recommend that you back up your files while you can then replace your hard drive.

  I hope this helps.

  Kind regards

  Jen

  If my post answered your question, please mark it as "accept as a Solution.

• Downloading an app to test does not

  In the applications section when I hit the button 'try' for an application, I would try the app moves upward in the section install but the "try" button is always present and is not actually download the app. I'm doing something wrong?

  Sign out of Creative cloud and connect again.

  https://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Temporarily disable anti-virus and firewall.

  If you use Anti Virus Mcafee, AVG, Notron applications... etc. Be sure to turn off their smart firewall.

  Then try to install After Effects and check.

• update my .ipa in DPS App Builder for the test does not work

  Hello

  I create my .ipa file in DPS App Builder for the test on my iPad, before I have to publish on the app store. No problem. I have tested and seen a few changes to make. I made the changes on my folio, updated in the generator of folio of indesign (in the cloud). Then I go back to DPS App Builder and rebuild a file .ipa from 'Manage' and 'Edit', download and test my certifates, windows seems to work ok. Then I created the new .ipa file (after deletion of the one on my desktop and iTunes) but when I sync it back on my iPad is not up-to-date. It is always the first version of my folio without changes.

  I tried to create a new application from the beginning, but the serial number unique edition no longer works. So my only solution is to update my folio, right? But what is the right way to do it? Am I missing something? I found no answer in the guide step by step on this issue.

  Or is it possible to completely delete the first version in DPS App Builder to recreate it without losing my serial number unique edition I have has not itself present Apple yet?

  I have something to do in the Folio Producer?

  Thanks for your help.

  Julien.

  Single edition series is a use of time, so change is not possible your end directly in case you want to use the same serial number. In this case, you must contact the technical support of DPS, who can get an approval on a serial number reset after reviewing the need.

  In this case, I'll take this offline with you regarding the forum post # http://forums.adobe.com/message/5597607.