WRT110 - cannot access a modem or router

Similar Questions

• Cannot access the internet (table routing and connection seems to be very well)

  Hello

  I have a problem that I can't know at the present time.
  The problem started after uninstalling cisco anyconnect vpn.
  Description:
  cannot access Web sites or even the router configuration panel
  cannot tracert beyond the first jump (router)
  can ping to ip Internet addresses
  routing table appears to be well
  After disabling all services additional error is always persistent
  computer is connected to the router cable
  So, it seems that something is blocking the connection, but I can't understand what...

  It fixed to the help of netsh winsock reset catalog and restart...

• VPN clients cannot access remote sites - PIX, routing problem?

  I have a problem with routing to remote from our company websites when users connect via their VPN client remotely (i.e. for home workers)

  Our headquarters contains a PIX 515E firewall. A number of remote sites to connect (via ADSL) to head office using IPSEC tunnels, ending the PIX.

  Behind the PIX is a router 7206 with connections to the seat of LANs and connections to a number of ISDN connected remote sites. The default route on 7206 points to the PIX from traffic firewall which sits to ADSL connected remote sites through the PIX. Internal traffic for LAN and ISDN connected sites is done via the 7206.

  Very good and works very well.

  When a user connects remotely using their VPN client (connection is interrupted on the PIX) so that they get an IP address from the pool configured on the PIX and they can access resources located on local networks to the office with no problems.

  However, the problem arises when a remote user wants access to a server located in one of the remote sites ADSL connected - it is impossible to access all these sites.

  On the remote site routers, I configured the access lists to allow access from the pool of IP addresses used by the PIX. But it made no difference. I think that the problem may be the routes configured on the PIX itself, but I don't know what is necessary to solve this problem.

  Does anyone have suggestions on what needs to be done to allow access to remote sites for users connected remotely via VPN?

  (Note: I suggested a workaround, users can use a server on LAN headquarters as a "jump point" to connect to remote servers from there)

  with pix v6, no traffic is allowed to redirect to the same interface.

  for example, a remote user initiates an rdp session for one of the barns adsl. PIX decrypts the packet coming from the external interface and looks at the destination. because the destination is one of adsl sites, pix will have to return traffic to the external interface. Unfortunately, pix v6.x has a limitation that would force the pix to drop the packet.

  with the v7, this restriction has been removed with the "same-security-traffic control intra-interface permits".

  http://www.Cisco.com/en/us/partner/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

• WRT110, Vista, wired desktop cannot access utility based on the router's web

  Computer Vista hard wired to the WRT110 cannot access the router. But it CAN get to internet and CAN ping router without losses. The XP machine is wireless, can get internet and CAN ping router without losses, but also can NOT access the router page. Ipconfig displays 192.168.1.1 is the correct default gateway address.  Yesterday, I had to reset the modem to access the router and had to enter all the parameters.  Could access router yesterday but can't today. The IP address is valid from yesterday to tomorrow. I don't understand what has happened to prevent access to the router. I even unplugged the modem to the router and still cannot access router today.  I can't find this problem in the forum, hope this isn't a duplicate request. Thanks for any help

  I have NO idea why, but I can access the Web with IE8 installed utility pages.  Has absolutely no sense to me.  Of course, it must be some kind of safety but my IE use medium-high settings, so I can't imagine what passage of IE7 to IE8 did indeed these parameters.

  Happy now that I can access these pages, finally.  Hope this helps someone else.

• Cannot access my router through the Explorer configuration page

  I need to do a port forwarding on my router. My internet connection works (even if she falls occasionally) and I can also connect to other computers on my network. However, I cannot access my router through IE page (I get a message saying: page not found). When I go see the map in the options Vista network, the router is not displayed and when I clikc on "See the whole map", I get a message saying that Windows cannot detect any computer or devices.

  My connection to the router is connected, and it is a WRT54G Lyinksys. Any ideas how I can see my router or go to its page layout? Another thing, I went to CMD and the ping command returns a default gateway 192.168.1.1, which is what I have my using the address of the webb page.

  Thanks for any help.

  Hi JBHPUser,
  
  (a) other router configuration page, you are able to access other Web sites?
   
  (b) what operating system and Internet Explorer version do you use?
   
  This article can be very useful.
   
  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
  http://support.Microsoft.com/kb/956196
   
  You can also access these links, which is primarily for Windows Vista, but are also applies to Windows 7
   
  
  Solve problems with computers not appearing is not in the network map
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map
   
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
   
  
  Aziz Nadeem - Microsoft Support

• Cannot access the gateway/DHCP WS2012

  Hi all

  For some reason any Windows Server 2012 machine cannot access my gateway (router). I got a new modem/router ATT (NVG589) so I got rid of my dlink router DGL4500. For some reason my server cannot get an IP from the DHCP on the router (windows is currently giving a private ip address). The dlink gateway is 192.168.0.1, and the new is 192.168.1.254. I have tried to put a static IP address, flush the dns, set it to automatic and searched online, nothing seems to work. When I plug the dlink again, the server is able to get an ip address from it. Am I missing something that I must specially configured in the NVG589? or y at - it something on the server, I need to change?

  Hello

  For questions on Windows Server 2012 you can post your question to the TechNet forums. They will be able to guide you to the best.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• Cannot access WVC54GCA on internet

  My camera works fine on my local network, but it cannot access it remotely via the internet. I watched several discussions on this subject here, been through all the documentation, I find in every detail, and I think I have everything set up according to what I read. You can see everything that could be wrong in my set up?

  WVC54GCA camera:
  Fixed IP: 192.168.0.200
  Subnet mask: 255.255.255.0
  Gateway: 192.168.0.1
  Primary DNS: 192.168.0.1
  Active DDNS
  TZO.com service provider
  Domain name: Linksys - Cam.com
  Other Web enabled 1024 access port

  D-Link DIR-635 router:
  WAN: connection type DHCP client
  IP: 192.168.1.2
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.1.1
  Primary DNS server: 192.168.1.1
  LAN: IP: 192.168.0.1
  Subnet mask: 255.255.255.0
  DHCP server disabled
  Port Forwarding (virtual server also same set):
  IP: 192.168.0.200 TCP 80 Port
  IP: 192.168.0.200 TCP Port 1024
  Firewall router: DMZ enabled for 192.168.0.200

  Modem Linksys ADSL2 MOLT:
  Local IP address: 192.168.1.1
  Subnet mask: 255.255.255.0
  Local DHCP active IP 192.168.1.2 to 192.168.1.254

  I suspect that you have a DOUBLE NAT - which means that you have two firewalls in the path.  Look at your DSL Modem, probably because the WAN IP of the router D-Link is a 192.x.x.x it means that your modem is DSL NAT/DHCP and is also a firewall.

  Call your ISP and tell them that you want the Modem to a MODEM ONLY - (aka the bridge Mode) and once you do this, the router D-Link will get the REAL WAN IP from the modem.

  This will solve the problem, give your ISP a ring and you will be up and running in a few minutes

  See our test camera at MyHomeServer.com WVC54GCA

• HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

  Hello

  My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

  Thanks in advance.

  Hello @jerome256,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are having a problem with your WiFi and wanted to help you!

  You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Cannot access Time Capsule and MacBook Pro on Windows task force immediately after upgrade to Vista professional professional 7

  I had a Windows workgroup for years, linking the PC and Mac, but also a Linkstation network through a Time Capsule router/Hard Drive Combo.  Immediately after the upgrade from professional Vista to 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but cannot access it.  I am able to access the Linkstation - system wonder a user name and password, and I have immediate access.  However, the system does not n = me a username and password when I try to access the two Apple products.

  Interestingly, I can access the Vaio MacBook, in providint the username and password for the Vaio.

  Please notify.  Thank you.

  IT FIXED!  Found the answer on the W7 Forum

  Access to Mac OS X Windows sharing Windows 7
  Windows 7 will not work with the Mac OS X Windows support for default share file. If you try to access a shared folder on Mac OS X, W7 will display a logon error repeatedly.
  The problem is that W7, by default, will only use NTLMv2 for authentication, which is not supported by the service of sharing of Windows of Mac OS x.
  The other problem is that safety minimum Session for NTVLM SSP based Clients.
  To work around this problem:
  1. in W7, open the control panel
  3. double-click on Administrative Tools
  4 double click on local security policy
  5 expand "Local policies" and select "Security Options".
  6. locate "network security: LAN Manager Authentication Level" in the list and double-click it.
  7. change the setting of "NTMLv2 only send responses" to"send LM and NTLM - use NTLMv2 session if negotiated"
  8. network Security: minimum session for the NTLM SSP (including secure RPC) Clients security
  9. change the setting of "128-bit" unchecked (No Minimum)
  10. click on OK

• I cannot access internet Windows XP.

  Hello

  My name is Tommy and I need help. My desktop computer shows that it is connected to the internet, but when I try to use any application that requires the internet (IE, firefox, chrome, League of legends, etc..) I get a 'connection error' / Web page isn't reachable. Internet works on my parents and my sisters computer, so I don't think it's a problem with the router (even if they're using wifi). My firewall will not turn on either. I tried a reset winsock, but to no avail.  I ran a few antivirus scans and eventually find a sitting trojan.muldrop in my System Volume Information folder, and I deleted it with by Dr.Web CureIt. After the removal of the virus, my computer will still not access the internet, and I can't turn on my firewall. Please help if possible!
  Thank you!

  Original title: my computer says it is connected but cannot access the internet.

  Hi Tommy,.

   

  Please contact the Microsoft Community.

   

  I would have you look at the article-

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

  Do get back to us and let us know. We will be happy to help you.

  Thank you.

• Dell has developed a passwoord and cannot access the Windows XP system on a network share in Windows 7.

  Original title: network router, XP computer and Windows 7 laptop computer dilemma.

  My system XP computer is part of a network using a router. I also have a laptop Windows 7, using the same network. Reference Dell set up a password so that the network is not accessible without password, reducing the risk of piracy. Now, I can not in the XP system because of the defined password.  How to reset or enter the password on the XP computer?

  Hi Scottid2,

  1. do you receive error messages when you access the Windows XP system?

  2. What is the password being set by Dell?

  You can check in the Windows 7 system if the password protected sharing is enabled. When protected by password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer.

  You can turn off password protected sharing and check if it helps.

  For more information, see the articles:

  Why can't I connect to other computers?

  Networking of computers running different versions of Windows

  As the password is set by Dell, you can also consult with support of Dell for the same thing:

  Dell support

• Cannot access the internet on a network Windows XP when Windows 7 goes to sleep

  Original title: Windows 7 Windows XP network problem.

  I replaced a Windows XP computer on my node 4 (2 PC, printer 2) cable network with a Windows 7 computer.  When the Windows 7 computer in mode 'sleep' the other (XP) computer cannot access the internet.  A message appears that there are 2 computers with the same IP address.  If I wake the computer 7 fine.  That is what it is?  I agree not all files between the computers.

  Hello

  It is usually the case when, for example, a router is off, but one or more of the devices connected to the router are left on.

  The devices to retain the ip address assigned to them, but when the router starts up again it has no knowledge of this. If when you start one of the other devices, the router can assign an ip address already in use. Concrete example that I reproduced with my router and the PC...

  • Start the router, then boot PC1 and PC2 - the router (192.168.1.1) will allocate for PC1 192.168.1.2 and 192.168.1.3 to PC2
  • Turn off the router, then turn off PC2, restart and shut off again
  • Put the PC1 to sleep
  • Start the router and PC2, the router does not PC1 and allocate 192.168.1.2 to PC2
  • PC1 to wake up and there still 192.168.1.2 who now is a confrontation with PC2

  Other ways to reproduce this situation may also be possible.

  All devices on your network must have a unique ip address, where the warning message.

  If you get this situation once again, the solution is to turn off all devices, including the router, then restart the router, then restart all devices connected to the router.

  To avoid this, you may be able to put ip Reservations for your router address which will ensure that all devices connected to the router always get the same ip address (unique). If you are unsure how to proceed, we will need your router brand and model to help.

  Tricky

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Win t Home Basic: windows cannot access \\NameXP

  Connection ethernet desktop, Windows 7 Home Basic:
  Windows cannot access \\NameXP, Err code 0 x 80070035

  Computer NetBook, Windows XP Home Edition, Wireless connection:
  \\NameWin7 is not accessible. You are not allowed to use this network resource

  Working group name is the same on both computers. Both computers are connected to the wireless router and have Internet access, but cannot see each other. Sharing is turned on, and there are shared folders on both computers.

  The problem is on the Netbook computer - I can configure the third computer (Windows XP Professional laptop) to access desktop computers via the wireless.

  Hi VojislavJosimovic,

  ·         Which antivirus program is installed on the computer?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: You can follow this step by step guide and check if it helps.

  Networking of computers running different versions of Windows

  See also:

  Sharing files and printers with different versions of Windows

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".