WRT160nV2 Web Interface broken after FW update

Similar Questions

• WRT54G V3.0 Web Interface broken after FW update

  I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

  WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

  Yoohoo!

  Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

  Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.

• Managing policies broken after the Update Rollup 4

  Server details
  Server product	ColdFusion
  Version	9,0,1,274733
  Edition	Standard
  Operating system	Windows Server 2008
  OS version	6.0
  Update level	/C:/ColdFusion9/lib/updates/chf9010004.jar
  Version of the Adobe driver	4.0 (build 0005)

  I recently upgraded to 2 of my servers to the Rollup 4 in response to bullitin of security APSB13-03. Everything seems to work ok and the update went through fine. Happened me on the accident click the font management link and was surprised to see that what was once a completely filled page now simply read the fonts not found. After looking through the many posts on the forum and google searches, the similar mention only I'd come through was http://forums.adobe.com/message/4495733#4495733. However, unlike the OP in this post, I was able to add new user-defined fonts. The only thing that I havn't done is go back the update since that let me a big problem in the form of a security hole. My problem is that no system font doesn't seem to appear on the page, but I think that the fonts are really at work even if they do not show on the page. I ran across the post of carehart http://www.carehart.org/blog/client/index.cfm/2011/10/21/why_chfs_may_break and determined that everything was done correctly, however if wrong something I can't say what.

  Everyone knows this? I know that this Cumulative 4 update was just released yesteraday, but maybe even a similar expiernce with another fix?

  Vishal

  Vishal,

  Please follow the step #12 to http://helpx.adobe.com/coldfusion/kb/cumulative-hotfix-4-coldfusion-901.html to copy the file jpedal.jar into the directory lib to see restart the CF service and check the section of police management in the CF admin to see if the problem is resolved.

• HA broken after I updated my file/etc/hosts

  Hi all

  I have a urgentquestion to ask.

  I've updated my host from my ex file two servers and he beat HA.

  He said this formula the VC client: cmb delete failed

  I tried to uncheck HA and double-checking HA but I didn't work.

  From what I see in previous posts, it could be a DNS problem.

  I can ping my shortname, FULL domain name and ip are both servers without any problems.

  Anyone has nay clue as to what I can do to fix this freaking?

  Thank you.

  Are u restatrd sevice

  1. service mgmt-vmware restart

  1. Service vmware-vpxa restart and try

• WRT54G2 v1 broken web interface

  Sorry my bad English.

  My problem:

  in the web interface broken router (some items hide / present or not): see puctures

  
  
  
  

  in pic2 you see - upgrade button to hide... I can't upgrade or rewrite the firmware.

  I am trying:

  try to rewrite the firmware of the web interface
  Try reset firmware by pressing the reset button on the back...

  try to change the browser (firefox ie opera safari)

  try disabling (css, scripts, views) in browsers

  try to change the Connection port on the router and the pc

  Try change mobile pc station - another laptop

  try to connect other OS (ubuntu xp vista win7)

  .. .no result

  What can I do to restore the original firmware?

  solution found:

  Turn the router off

  then press reset button and return power

  Press the reset button for the router to start up... and then open the browser

  router must be in management mode.

  then wrote dd - wrt VxWorksKiller-G2V1 - new.bin (original firmware does not work I try!... but maybe you happier)

  After this router reboot (power cable reconnect)

  and wrote the firmware dd - wrt.v24_micro_generic.bin main by tftp

  cd /d tftp.exe -i 192.168.1.1 PUT dd-wrt.v24_micro_generic.bin
  

  After that reboot the Router 2 times - (reconnecting the power cable)

  and do 1 hard reset (30-30-30 method)

  It has helped me.

  dd - wrt site

• EA2700 - unable to return to the old Web Interface

  Hello

  I have an EA2700 that I am moving back to the old interface, however it error whenever I try to install the firmware.

  That's all that I always get this message:

  Unexpected error that the firmware update has failed. Please try again later.

  We encountered an unexpected error. If the problem persists, please visit our Technical Support site.

  I have reset the router several times, he turns off all night, re-uploaded the file several times and I am still unable to restore successfully. Sometimes she same error when I try to set the password of the router itself and I have to reset it again before I can use the interface.

  Was setup to give than to try, and Oh surprise when I connected to my router this time I was introduced to the classic web interface

  Among the updates of the firmware Failed must have actually managed, even if he just kept throwing error messages. To be sure, I re-flashed the old firmware from inside the classic interface and it worked perfectly without errors.

  At least I am now finally back to where I was before the clouds rolled in.

• ACS Web Interface 5.1 does not

  We have a Cisco Access Control Server (TACACS+ version 5.1) with an additional
  
      2 port NIC card. This produces 4 ports on the ACS server(G0 through G3).
  
  After initial setup of the ACS server with an IP address on G0, I connected a Windows 7
  
      server with IE8 to G0. The ACS web interface appears (after accepting certificate) and I
  
      entered some user accounts and NDGs.
  I then connected the ACS server to a configured port with port-security on our 6500
  
      switch. The port becomes err-disabled since the MAC address does not match up. It appears
  
      that the onboard NIC on the ACS server is bonded thus producing the MAC address issue.
  To fix this connection issue, on the ACS server, I cleared out G0 and setup G2 (additiional
  
      NIC card) with the IP address. After connecting to the 6500 switch, the ACS server port
  
      works fine.
  I removed the connection to the 6500 and connected the Windows server to the ACS.I can ping
  
      the ACS server but the web interface is now unavailable unlike before. I do not get a
  
      certificate warning on IE, it just states that internet not available.
  On ACS, the 'show' status of acs shows all the processes are running and initialized.
  Any help would be appreciated. It has got me stumped as all I did was change NIC configuration
  
      on the ACS server.
  Antonio
  
      

  I wanted to check if the failed to load web interface could also be due to something on the 6500 switch.

  So far:

  You have been able to see the Web interface with the ACS configured on G0 and directly connected to the PC Win 7.

  With the G0 set to ACS, you saw some MAC problem and so no web interface.

  With the ACS configured on G2, you can test the ACS server when it is directly connected and connected to the 6500, but in both cases do not display the web interface.

  So, it seems that you have two options:

  (1) seek to solve your problem of port security 6500.  (You have access to set up the port-security 6500?)

  (2) fix the G2 interface configuration.  If you do not see the web interface with the Win 7 PC directly connected then there is something wrong with the config on GBA.

• Web interface error - could not contact the server at this time

  Hey all,.

  Immediately after completing the deployment of the new 2.1 UM I'm running an obstacle when connecting to the web interface. After authentication, with the web interface, I get the following when you select my user type (service provider or aggregator - anyone):

  

  I redeployed the VAPP twice is not a transient deployment problem. Networking seems fine - I can ping from areas on the Internet from the SUSE console. Not sure that this message refers on the 'server' is in contact with. It is deployed on ESXi 4.1 in a cluster vCentre vswitches standard, nothing special.

  Any ideas?

  Kind regards

  Daniel Whittaker.

  Daniel,

  When you get the message after installation, click OK and then refresh the page or click F5.  The message should appear is no longer.

  Kind regards

  David

• Volume in Youtube after the update

  I'm running a fork chrome for a web browser. After the update to the latest version of Flash, my typical volume of Youtube in the order of 20% rose to deafening volumes. Try a variant of Flash version 10 returned the volume to a normal level.

  I found the problem (after a few months, huh). I had the audio channels in my 8 game system when I did only have stereo. I thought that there not matter since everything is not surround would be reduced accordingly.

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• SRW2016 Web Interface after Firmware Update error

  I have a new SRW2016 and after updating from 1.2.1 to 1.2.2 firmware I get an error trying to connect.  I use Firefox with IETab and the error message is:

  ... An error has occurred.

  ... You want to debug?

  ... Line 11

  ... Error: "tBodies' is null or not an object

  I tried to use Internet Explorer, but the status bar displays "error on page".

  I * really * need help!  Any ideas?

  BTW, I got the update of the firmware twice.  The first time was

  minutes and finally he stopped (I don't remember if there was a mistake

  message).  The second update seemed ends without problems.

  TIA

  Well, I was about to do the update with hypertermial/xmodem, when I thought I should check the browser interface.  And now, it's working now (even if it's really slow).

  He had to because of my recent update to Firefox v2 to v3, as well as the updated IE Tab addon.

  I hope that the web interface used the HTML standards and not require IE. It's very frustrating.

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• WRT54G v4 unusable web interface after firmware update

  I tried to upgrade (actually downgrade) my WRT54G v4 firmware 4.30.11 to 4.21.1. When the progress bar reaches the mark to halfway, I got the message saying that the upgrade was successful. However, now the web interface is so messed up that it is unusable. It's a sign that something went wrong.

  Power, WLAN, Ethernet 1, and Internet lights are all green solid, which should be a good sign. After the upgrade, the web interface says "WRT54G 4.21.1', which is the firmware messed up I am downloading. Browsers, then restart my computer, I have confirmed that it is a router problem, not a problem of the browser cache. I also tried to do a hard reset by pressing the reset for 30 seconds button, unplug the router while holding down the button of reset for 30 seconds and then plug the router while holding down the button of reset for another 30 seconds. This has not fixed anything.

  I encountered a similar problem after an update of the firmware several years ago and the fix to upgrade the firmware using TFTP. This time, however, the TFTP utility could not download the firmware. Using a hack that I found on the internet, I have re - download the 4.21.1 firmware, but the web interface was always messed up. I then downloaded the 4.30.13 firmware. The web interface is still messed up, but then he said "WRT54GL 4.30.13. I then went to the firmware I wanted, WRT54G 4.21.1. The web interface is still screwed up, but said «WRT54G 4.21.1»

  Anyone know how to solve the problem? Yet once, it took place immediately after a firmware update, the web interface is unusable, is not a problem of the browser cache and tried a hard reset.

  Thanks in advance if anyone can help.

  My router model is WRT54G v4. The v4 WRT54G and the WRT54GL are generally considered to be the same device with different model numbers. According to the article of Wikipedia WRT54G, "the WRT54GL is technically a reissue of the version 4 WRT54G."

  I used the firmware 4.30.X for years without problems. However, I decided to switch to the 'right' firmware for my router and something went wrong during the upgrade.

  I solved the problem. I basically just dropped the Linksys firmware and uploaded the DD open source-WRT firmware mini instead. Now everything works fine.

• M600 No. Web Interface after update to 1.11 to 1.65 iDRAC

  Hello!

  We have a few M600s which have not been updated for a while and are still ongoing iDRAC 1.11. When we update to 1.65 that they do not always have a Web Interface like some of our other M600s which have been maintained over the years. Looking at the scans Nmap and Wireshark, it seems that port 443 is blocked even if it is defined by default in cfgRacTuning. We tried to reset the newspapers, configuration and adjustment of different ports but not luck.

  We run CentOS 6.6 on these blades, and our upgrade method uses the file .bin on the Dell site. I was wondering if there may be another method of upgrading for those with them running old firmware.

  Thank you

  Stevie

  Found the solution.

  Looks like there's an old bug where when downloading a cert Active Directory it would replace the Dell SSL cert and we had a few old m600s that never have been set. To return to the original self-signed cert Dell iDRAC firmware must be 1.11 and run "racadm racresetcfg." All the foregoing 1.11 does not seem to reset the cert.

  The other solution is to download a signed CA certificate.

• Web interface for updating Subvars

  Greetings,
  
  I am trying to build a Web interface where users (Admin) can go and update the Subvars and run the Calc and BR, required if necessary.
  
  Have someone at - it never built something similar to this?
  
  I intend to call "MXL" scripts from the web interface and pass the Variables by the web itself (server, App name, name of the BD, Subvar, the new value)
  
  and the Alias planning to call the relationship DB. And users can run the calc and BR, once they will update the Subvars on the web itself.
  
  Is - this sounds feasible design?
  
  Thank you.

  The problem that I see with this approach is it is given too large a group of people and the stage of changes to each other. For example, the user has changes in the month of Jan and the coup of a calc, but user B m at roughly the same Feb moment. Of course, given that the variable can have only one value, Feb WINS and the user has no idea that his calc does not work correctly.