HA broken after I updated my file/etc/hosts

Hi all

I have a urgentquestion to ask.

I've updated my host from my ex file two servers and he beat HA.

He said this formula the VC client: cmb delete failed

I tried to uncheck HA and double-checking HA but I didn't work.

From what I see in previous posts, it could be a DNS problem.

I can ping my shortname, FULL domain name and ip are both servers without any problems.

Anyone has nay clue as to what I can do to fix this freaking?

Thank you.

Are u restatrd sevice

  1. service mgmt-vmware restart

  1. Service vmware-vpxa restart and try

Tags: VMware

Similar Questions

  • WRT54G V3.0 Web Interface broken after FW update

    I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

    WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

    Yoohoo!

    Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

    Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.

  • Must VIPs be in the file/etc/hosts?

    Must VIPs be in the file/etc/hosts?
    DB version: 11g Release 2
    Platform: Solaris 10

    Question1.
    For a RAC installation whose VIP configured in DNS server, can we the entry in the file/etc/hosts below? It will already be in the DNS server and we keep these entries in/etc/hosts only for reference. Right?

    Question2.
    In the server DNS, the IP address for the name of VIP should solve a qualified name (with monentreprise.com) as Column2 or just name of VIP (column 3) is enough or both as shown below?
    #Virtual IP config
# col1               #Col2                   #col3
10.168.1.11   rac1-vip.mycompany.com   rac1-vip
10.168.1.22   rac2-vip.mycompany.com   rac2-vip

    Schotzie wrote:
    Must VIPs be in the file/etc/hosts?
    DB version: 11g Release 2
    Platform: Solaris 10

    Question1.
    For a RAC installation whose VIP configured in DNS server, can we the entry in the file/etc/hosts below? It will already be in the DNS server and we keep these entries in/etc/hosts only for reference. Right?

    If you use the manual IP address Configuration (IE not to the help of GNS)
    You must set the virtual IP address in DNS file and hosts.
    http://download.Oracle.com/docs/CD/E11882_01/install.112/e24616/presolar.htm#CHDGABED

    >

    Question2.
    In the server DNS, the IP address for the name of VIP should solve a qualified name (with monentreprise.com) as Column2 or just name of VIP (column 3) is enough or both as shown below?

    #Virtual IP config
# col1               #Col2                   #col3
10.168.1.11   rac1-vip.mycompany.com   rac1-vip
10.168.1.22   rac2-vip.mycompany.com   rac2-vip

    Short name and DOMAIN name must be resolved in DNS if you use the Directory Service in your network.

    Kind regards
    Levi Pereira

  • Setup of SCANNING using the file/etc/hosts

    DB version: 11 GR 2
    Operating system: Sun Solaris 5.10
    Node 2 Rac


    I've done all the configuration of connectivity hardware/software/SSH for the installation of RAC. Now I have connected as a user of grid and try to install the clusterware ('Grid Infrastructure')

    I have implemented Public IP and IP private for nodes according to the oracle documentation. We do not have DNS for these nodes. So we thought to use the file/etc/hosts.
    Node1's: Public IP : 10.80.143.214
Node1's: Public IP : 10.80.143.215
    Question1.
    When I ping 10.80.143.219, it wrong; which means that this IP address is not allocated (not used by any node), so I tried to add the following entries on the file/etc/hosts of two nodes
    10.80.143.219  danube-scan.scott.com  danube-scan
10.80.143.219  danube-scan.scott.com
10.80.143.219  danube-scan 
    None of the above worked, and I kept getting
    INS-40718: Single Client Access Name (SCAN) name:string could not be resolved.
    Can someone show me how as the SCAN entry next to the file/etc/hosts?

    Question2:
    The file/etc/hosts, how Setup identifies that a particular entry of the IP and host name is intended for ANALYSIS. If the word "scan" to be present in the SCAN entry?

    Question3:
    The grid Setup will prompt you for
    1. name of the cluster
    2 SCAN the name
    3. port SCAN

    For a Cluster name. I can give any name that I love. Right?


    Question4.

    SCAN name must belong to a domain of DB as (scott.com as shown above). Cannot create a database RAC 11 GR 2 without belonging to a field of DB?

    Hello

    Try ping this host of the danube-scan in any army, this command must resolve this name in all hosts.

    That is to say: the server does not respond to the PING, but must indicate the IP address.

    Check...

    The 10.80.143.219 IP address must be the same subnet in the public network.

    This section below should be/etc/hosts in all hosts in the cluster.

    the danube - danube-scan scan.scott.com 10.80.143.219

    To configure your host to perform searches in hostname to host files, change the line that starts with hosts: to include the keyword files. For example, if your file /etc/nsswitch.conf hosts line looks like:

    hosts: files dns

    Change it as follows:

    hosts: files dns

    The order of keywords on this line indicates the order in which made Solaris reference the name of services. Keyword files represents the file/etc/hosts.

    Kind regards
    Levi Pereira

  • file/etc/hosts for a stand-alone database

    Dear Experts,

    I'm installingOracle 10g R2 on RHEL-5 EE on a VMWare environment for learning purposes. I have configured my file "/ etc/hosts" as:
    [oracle@dbhost oui]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.


127.0.0.1       localhost.localdomain   dbhost.mydom.com       localhost      dbhost
192.168.1.101   dbhost.mydom.com       dbhost
192.168.1.100   dbhost2pc.mydom.com       dbhost2
[oracle@dbhost oui]$
    and the output of "ifconfig" is:
    [root@dbhost ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0C:29:22:AE:4A
          inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe22:ae4a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:354 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:47459 (46.3 KiB)  TX bytes:546 (546.0 b)
          Interrupt:10 Base address:0x2024

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2392 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2392 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3039139 (2.8 MiB)  TX bytes:3039139 (2.8 MiB)

[root@dbhost ~]#
    What's my configuration "/ etc/hosts" correct?
    Is it mandatory to have the first line with "127.0.0.1..."?

    Thank you for taking the time to answer a very basic question.


    Good bye

    Prem Kumar says:
    Dear Experts,

    I'm installingOracle 10g R2 on RHEL-5 EE on a VMWare environment for learning purposes. I have configured my file "/ etc/hosts" as:

    [oracle@dbhost oui]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.

127.0.0.1       localhost.localdomain   dbhost.mydom.com       localhost      dbhost
192.168.1.101   dbhost.mydom.com       dbhost
192.168.1.100   dbhost2pc.mydom.com       dbhost2
[oracle@dbhost oui]$

    and the output of "ifconfig" is:

    [root@dbhost ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0C:29:22:AE:4A
inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe22:ae4a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:354 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:47459 (46.3 KiB)  TX bytes:546 (546.0 b)
Interrupt:10 Base address:0x2024

lo        Link encap:Local Loopback
inet addr:127.0.0.1  Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING  MTU:16436  Metric:1
RX packets:2392 errors:0 dropped:0 overruns:0 frame:0
TX packets:2392 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3039139 (2.8 MiB)  TX bytes:3039139 (2.8 MiB)

[root@dbhost ~]#

    What's my configuration "/ etc/hosts" correct?

    That's if you want all references of this machine 'dbhost' or 'dbhost.mydom.com' to resolve to address IP 192.168.1.101 and all references of this machine to 'dbhost2' or 'dbhost2pc.mydom.com' to resolve the IP 192.168.1.100.

    Is it mandatory to have the first line with "127.0.0.1..."?

    No, it can be anywhere in the hosts file. Strictly speaking, it is not yet mandatory to have at all, but as the poster said, if you delete it, some features may be lost.

    All net communications should go down to an IP address. The hosts file is nothing else that a mechanism to map a name to IP address. This allows you to return a destination by name, and really, this name can be anything you want. Resolving to 127.0.0.1 ' localhost' is a universal standard which depend on some process.

    >

    Thank you for taking the time to answer a very basic question.

    Good bye

  • vCAC 6.0: keep coming back after the reboot of the file/etc/hosts

    HI guys,.

    I am running vCAC 6.0, I noticed that on my identity server's host name is not COMPLETE and I also noticed that I have big fingers DNS server settings.  I can fix this in the user interface and I confirmed that the/etc/hosts and /etc/resolv.conf have been updated correctly.

    However, if I reboot the server all restores the original files.  Same thing if I modify the file manually with VI.

    I saw exactly the same thing with vCOPs.

    Any ideas?

    Ben

    I am not sure what is causing the reversion.  Reinstall the identity a vCAC using the FQDN and things got appropriate DNS works...

    Ben

  • After an update my file, editing, printing etc. lines disappear the

    I had File, Edit, etc. on a single line and near the right part of the House, printing etc., but they disappeared after a three Windows Update message, how to do that I get them because I have tried everything I know on this computer, but am not very good

    Hello

    1. what update has the problem from occurring?

    Updated version has a problem in the history of the update.
     
    a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
    (b) in the left pane, click view update history.
    c. to display more information about an update, double-click it.

    Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.

  • WRT160nV2 Web Interface broken after FW update

    Hi all

    After upgrading the firmware on my router, the Web Interface is more usable. Missing buttons, etc. Even if I go directly to the 192.1681.1.1/update.asp also this page is useless and so I can't do a FW update again. The router works as all parameters was intact. But I can't make any changes to the router. How can Flash the router again? TFTP, etc.

    Best regards

    Albert

    Well, that was the problem after the firmware upgrade, you should try to downgrade the firmware of your router... Firmware build 011 v2.0.02 has some issues, so maybe after a downgrade of firmware you'll be able to see the full web interface...

    For the Downgrade of Firmware see this

    Don't forget to reset the router to factory settings after the downgrade of firmware... If the web interface is always so high an IE, click on tools > Internet Options, and then delete all files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

    If the above fails, then try another browser or another computer...

    If all above fails them, then I would say there is something wrong with the router and you should get it replaced...

  • Managing policies broken after the Update Rollup 4

    Server details
    Server productColdFusion
    Version9,0,1,274733
    EditionStandard
    Operating systemWindows Server 2008
    OS version6.0
    Update level/C:/ColdFusion9/lib/updates/chf9010004.jar
    Version of the Adobe driver4.0 (build 0005)

    I recently upgraded to 2 of my servers to the Rollup 4 in response to bullitin of security APSB13-03. Everything seems to work ok and the update went through fine. Happened me on the accident click the font management link and was surprised to see that what was once a completely filled page now simply read the fonts not found. After looking through the many posts on the forum and google searches, the similar mention only I'd come through was http://forums.adobe.com/message/4495733#4495733. However, unlike the OP in this post, I was able to add new user-defined fonts. The only thing that I havn't done is go back the update since that let me a big problem in the form of a security hole. My problem is that no system font doesn't seem to appear on the page, but I think that the fonts are really at work even if they do not show on the page. I ran across the post of carehart http://www.carehart.org/blog/client/index.cfm/2011/10/21/why_chfs_may_break and determined that everything was done correctly, however if wrong something I can't say what.

    Everyone knows this? I know that this Cumulative 4 update was just released yesteraday, but maybe even a similar expiernce with another fix?

    Vishal

    Vishal,

    Please follow the step #12 to http://helpx.adobe.com/coldfusion/kb/cumulative-hotfix-4-coldfusion-901.html to copy the file jpedal.jar into the directory lib to see restart the CF service and check the section of police management in the CF admin to see if the problem is resolved.

  • After successful installation of Oracle R12 have changed/etc/hosts

    change the localhost line
    Of
    192.168.25.105 localhost.localdomain localhost

    TO
    127.0.0.1 localhost.localdomain localhost


    then the installation is successful!
    Why is this?

    Thank you

    Salvation;

    192.168.25.105 localhost.localdomain localhost

    TO
    127.0.0.1 localhost.localdomain localhost

    What is your server IP address? Your file/etc/hosts should be like

    127.0.0.1 localhost.localdomain localhost
    192.XX.XX hostname.localdomain host name

    It already covers the installation guide

    Respect of
    HELIOS

  • / etc/hosts for dhcp

    Hello people
    I installed 11.2.0.1 on oracle linux version 5 update 7 and works great
    I opened a session in the real system where I installed and checked that sqlplus "virtue sysdba" works and I can connect to the database
    my company has all its computers connected by a lan cable which provides both the sharing of files and internet connection...
    So what is dhcp means?
    because I think that Yes, so here's what looks like my file/etc/hosts
    127.0.0.1 unknown485b39d0b515.local.lan unknown485b39d0b515
    127.0.0.1 localhost.localdomain localhost
    Yes, it has only two lines (my bad, I did some adjustments)
    My ifconfig output looks like this
    eth0 Link encap HWaddr 48: 5 B: 39:D0:B5:15
    INET addr:192.168.1.3 Bcast:192.168.1.255 mask: 255.255.255.0
    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
    Fall of RX packets: 21980 errors: 0:0 overruns: 0 frame: 0
    Dropped packets: 14479 TX errors: 0:0 overruns: 0 carrier: 0
    collisions: 0 txqueuelen:1000
    RX bytes: 17251832 (16.4 MiB) TX bytes: 1814446 (1.7 MiB)
    Basis of interruption: 27 address: 0x8000

    Lo encap:Local Loopback link
    INET addr:127.0.0.1 mask: 255.0.0.0
    RACE of LOOPING 16436 Metric: 1
    Fall of RX packets: 4439 errors: 0:0 overruns: 0 frame: 0
    Dropped packets: 4439 TX errors: 0:0 overruns: 0 carrier: 0
    collisions: 0 txqueuelen:0
    RX bytes: 2788171 (2.6 MiB) TX bytes: 2788171 (2.6 MiB)

    virbr0 Link encap HWaddr 2E:12:83:50:CA:6 has
    INET addr:192.168.122.1 Bcast:192.168.122.255 mask: 255.255.255.0
    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
    Fall of RX packets: 0 errors: 0:0 overruns: 0 frame: 0
    Dropped packets TX: 23 errors: 0:0 overruns: 0 carrier: 0
    collisions: 0 txqueuelen:0
    RX bytes: 0 (0.0 b) TX bytes: 4190 (4,0 KiB)
    :
    :
    and the error I have right now is the following
    [oracle@unknown485b39d0b515 ~] $ sqlplus "virtue sysdba".

    SQL * more: Production release 11.2.0.1.0 Wed Aug 8 12:03:27 2012

    Copyright (c) 1982, 2009, Oracle. All rights reserved.

    ERROR:
    ORA-12547: TNS: lost contact

    Tell me if I need to explain anything
    Thanks in advance

    946207 wrote:
    Hello people
    I installed 11.2.0.1 on oracle linux version 5 update 7 and works great
    I opened a session in the real system where I installed and checked that sqlplus "virtue sysdba" works and I can connect to the database
    my company has all its computers connected by a lan cable which provides both the sharing of files and internet connection...
    So what is dhcp means?

    Not even close. Did you google 'dhcp '?
    See http://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol

    In short, DHCP is a method by which an IP address is assigned to a computer dynamically - especially at the start of the server, but can also be reset on a running system. Isn't a good thing for a server machine, because the client process will never be able to find it.

    You want your servers to have a fixed IP address.

  • entries in/etc/hosts recommended by VMware?

    Hi guys,.

    When environmental vSphere (ESX 3.5) is configured to use completely the DNS resolution is there any 'good practices' to fill in the file/etc/hosts with all other ESX hosts (like server VC)? Or only DNS is enough to move forward? How it looks like in relation to best practices?

    fix...

    Here is an example of our hosts on all ESX Servers file.

    127.0.0.1 localhost.localdomain localhost

    10.x.x.x esxname.domain.com esxshortname

    10.x.x.x 1.domain.com

    10.x.x.x 2.domain.com

    10.x.x.x 3.domain.com

    10.x.x.x 4.domain.com

    10.x.x.x 5.domain.com

    ignore the formatting, but there are tabs between each IP address

  • Tried to open the Task Launcher Microsoft Vista to update a file but got an error to reinstall the OS, now I can't find any of my personal files, etc.

    I tried to open the Microsoft Vista Task Launcher to update a file.   Got an error saying some files had been lost or deleted or something else and I need to reinstall.  Then I opened the disc to reinstall the operating system and reinstalled the operating system.  Now I can't find anything about it either — music, photos, files, contacts, nothing.  I don't even have the software I had installed.  How can I uninstall the operating system, I reinstalled?

    Original title: Microsoft Vista Task Launcher

    Hello

    When you reinstall the operating system, the hard drive is wiped clean of everything.

    It's like starting all over, when he was in new condition.

    See if you now have a windows.old folder.

    If you do, which should contain your data: pictures, music, etc.

    Programs need to be reinstalled. starting from the original media (CD, DVD or download Net).

    "How to restore your personal files after performing an installation of Windows Vista or Windows 7"

    http://support.Microsoft.com/kb/932912

    If you do not have a windows.old folder, you can try this free program to try to recover your data:

    Do this as soon as possible.

    http://www.Piriform.com/Recuva

    See you soon.

  • Short cut Thunderbird disappeared after an update this morning after a windiw stated that this shortcut is not found. I can't find where is the executable file. It

    This morning Thunderbird updated itself and a window pops up saying shortcut to thunderbird does not exist. After that I can't find where it is so that I can run.

    Thank you very much. Yes, the problem was exactly the same. Thunderbird executable disappeared after an update. I reinstalled it simply by downloading the configuration file. All my configurations and emails and folders, etc were in place. A great feeling to not lose everything. Again, thank you for your kind reply.

  • After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even

    After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even if I chose another folder

    Hello, there is a general regression in firefox 27 allowing any files to upload directly to a root drive. Please try to create a subfolder (like D:\Downloads) and set as the default location for downloads...

    See also bug #958899.

Maybe you are looking for