WRT1900 AC restart, Intermittent, unstable, please help.

Similar Questions

• My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my e-mail is _ @_. ___

  My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my email is * address email is removed from the privacy *

  The people who answer questions here are, for the most part, volunteers who have no connection with Microsoft.  Ask your question every two minutes won't get you a faster response.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the spooler print don't rest not always running after you launched the command "net start spooler", follow these steps

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window
  dependent on the spooler of sc config = RPCSS
  net start spooler

  If the spooler still will not start, you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• When to change a start page preferably, a dialog box pops up and won't go away, even after clicked and restart FF. Please help ASAP

  This dialog box indicates "an attempt to change your home page and default search has been blocked" & "click to change these settings. After clicking on the "close button {X}", won't let the box of my screen, where it blocks ANY activity. Which means that, not only the dialog box covers aloud to the left of my screen (on my Mac, blocking access to all of the choices of window button).

  Literally blocks the activity of the screen all THE more of a 3 "-4" AUTOUR / greater than the size of real dialog box. " Move windows just so I can access the window buttons, although clear of ' under / covered by "dialog, the buttons still do not accept that is clicked, to inch away from the box. Even if it seems to be completely cleared and outside the box.

  When I go to another application, like the finder or to a full-screen video game, your still dialog box, any blockage 'slot' and 'around '. It will not disappear, even after that I went to my preferences and original re - has chosen settings of no.

  PLEASE HELP AS SOON AS POSSIBLE BECAUSE IT IS VERY ANNOYING SCREWING WITH MY WORKFLOW - SEE PHOTO! Unfortunately, your browser will not upload a screenshot of 49K of this anomaly.

  Moreover, to load the image, you can meet your own message and attach the image to the response. Please change or blur sensitive information in the file before uploading the image.

• My app store and some other applications not re-downloadable are a question mark and are not in my file programs, Please HELP IVE TRIED EVERYTHING! GarageBand does not open, there was a question mark through the icon, restart comp, all the question marks

  I opened my garageband, but I does not, because there was a question mark hollow garageband icon, then I restarted the computer, it normally restarted (whithout saying I restarted the computer because of a problem), and when it was made of built-in apps were question marks, were not in the program and "it is not found on the computer.

  Please help even the app store is broken and he asked me if I would choose a program from the app store when I tried to re - download from the internet, said yes and it did not work. Help, please

  The? means that the location for the file specified in the Dock cannot be found.

  You said "were not in the programs.

  Did you mean that they are not located in the Applications folder? Windows has a record of programs, not OSX.

  You said "when I tried to re - download from the internet, said yes and it did not work."?

  What happened when you tried?

  The missing applications are in the purchase of the Mac App Store section?

• I have xp sp2 installed, I've upgraded to sp3 it settled and went to restart, but used to charge up please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have xp sp2 installed, I've upgraded to sp3 it settled and went to restart, but used to charge up please help

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mapo1477,

  1. do you get an error at startup of the system?
  2 have you tried to start the computer in safe mode?

  If you do not get any error message, then we recommend you to start your computer in safe mode and check if it starts successfully on the desktop. If it starts in safe mode, and then restore the computer. To do this, try the following steps:
  a. see the description of the options course in Windows XP Startup Mode
  b. Once you have started your computer in safe mode, restore the computer.
  See How to restore Windows XP to a previous state
  c. start the computer and check if the system starts in normal mode.

  To install Service Pack 3 successfully, see steps to take before you install Windows XP Service Pack 3

  Visit our Microsoft answers feedback Forum and let us know what you think.

• updated Windows, it does not update these files each time that I update and then restart my PC, she just asked me to update their new please help

  MSXML 4.0 SP @ a security update (KB927978)

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)
  Update for XML Core Services 4.0 Service Pack 2 (KB973688) Micrisift
  He will not update these files each time that I update and then restart my PC, she just asked me to update again please help

  Hello

  · What status appear in the historical versions?

  a. Click Start, in the search box, type in update

  b. click on windows Update

  c. click view update history

  Follow the steps from the link that has steps on how to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update: http://support.microsoft.com/kb/910339

• It keeps telling me that the required updates are not installed... I have already installed SP2 and restarted my computer TWICE. Please help me!

  He continues to tell me that the required updates are not installed in order to download and run Internet Explorer 9... I have already installed SP2 and restarted my computer TWICE.  Please help me!

  I wouldn't bother downloading it, but I need for a course that is only compatible with IE9... He is constantly telling me that "Setup does not support this pack", even if the sine qua non pack has been installed!

  Hi stephprice,

  I suggest you follow the articles provided below and check if it helps.

  http://support.Microsoft.com/kb/910339/

  http://support.Microsoft.com/kb/971058

• BlackBerry smartphones restart problem... Please help

  can someone tell me please how to restart my curve 8520?

  I have app updates, but cannot enter into my world of app until I have to reboot the device.

  He told me to hold down the power button, but all that is to disable the fone.

  can someone please help me because on my screen saying that I've updated knowing that I can not update the icon thing makes me want to throw the phone on the wall

  Thank you!!!

  fufuH wrote:

  makes me want to throw the phone on the wall

  Well, that might restart the device for once and for all!

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

  You can also press ALT + rightSHIFT + delete all three at the same time, to initiate a reboot.

  You will find thousands of messages here in the forum describing how this reboot is done.

  Good luck.

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• Unstable AE after rendering, have to start cold computer because the system becomes unstable. Help please!

  Hello world.

  I have a laptop Intel i7 Toshiba Qosmio with 12 GB of RAM, a 3 GB Nvidia graphics card.  Two 750 GB HARD drives.  Windows 7 64 bit Home Premium edition.

  I had to convert a video (in AE) of my camcorder Sony QuickTime then moka he could follow.  The file size was 12 GB.  I motion tracking with Mocha video 3000 frames have been followed.  I have completed my project and when I go to make it takes about 15 or more minutes to return, but after the rendering of the entire system is completely unstable and requires a cold start.  It makes the video fine, but the computer is unstable.

  I was looking at the use of the RAM then that rendered and he used only about 15% of the 9 GB allocated for AE.

  AE CS6 version 11.0.4

  Can someone help me with this?  I uninstalled AE and reinstalled and there are always the same.  I have a small project, no less important than a case and it preformed fine. No problems.

  Is the size of the files of great for AE?  Could the movement followed with Mocha be a factor in the stability of EI?

  No idea which continues, please help me.

  Thank you.

  I think I solved it.  I created the new exact replica of my project that makes the computer unstable.  I made it another 2 times, it takes 3 minutes and the computer is 100% stable.

  So I think that the old project was corrupt or something because the new double that works perfectly.

  So I call it answered.  Thanks for all help, much appreciated.

  Ron

• Please help have installed some updates and now the laptop won't restart

  Please help I have installed the updates windows asked what I do, restasrted my laptopp and now it won, t start up. It's show on a black screen! 0xc01a001d! 29371/56275(\Registry\machine\Schema\wcm://Microsoft...) I turned off I tried to leave again in safe mode and last good configuration and it is right on the same scene. feeling pretty desperate now any help please ASAP would be greatly appreciated TO

  my laptop is a SONY Vaio and it runs on Windows Vista Business

  Hello

  Try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If that does not resolve you would like to repost in the forum update of windows for the best help with this issue of update

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1

• 0x0000007E (0xc0000005 0x806a0c04 0x803995ec 0x803992e8) error messages on a blue screen... Please help, 3 days of problems

  I'm not a computer expert, so please exscuse me, 3 days ago, the computer kept freezing, I am running a packard bell intel celeron with windows vista, I have norton anti virus so I don't think my problem is the apparent virus, first Frost was intermittent but after an hour or two , all froze and wouldn't respond, I disconnected the power and he started upward, repair of windows says something along the lines of stacking and told me I had to check my drivers, I rebooted and was able to get back on but after a few minutes it kept freezing up again I went through the process and finally managed to put online, a message popped up on my screen telling me to update vista to service pack 2, I did, the computer seems to work very well so I thought that the problem has been resolved, yesterday when I turned on the same thing happened, yet once I went through the process and finally got the computer to work after several attempts , it would start up then restart itself or sometimes the screen would be just black and nothing would happen, the computer would be buzz but anything in life. yesterday after finally getting to turn on another message came up saying there are 31 important updates for vista, I downloaded once again of course it seremed work very well and I thought it was fixed, but unfortunately not yet today the same thing happens when I arrived to start the computer I decided to write the blue screen messages that include

  0x0000007E (0xc0000005 0x806a0c04 0x803995ec 0x803992e8) acpi.sys - address 806A0C04 base at 80 68 B000
  After that a long stay him to start it in safe mode, which took 2 hours is the same in safe mode, just frozen, I tried again and got to work in safe mode and it froze again and finally I managed to get to the top and works normally, I really have no idea what is wrong or how to fix it I managed to save important things like the photos that I have the impression that he wants to die, I even tried the system restore which is nothing because when it updated 2 days ago, it wipe all old restore points and so I absoloutley no way to restore to a point before he decides to drop , I have not downloaded new software in the last months have so no idea what could the cause of the problem, please help, and remember that while I can work around the basics I'm not an expert so please try to keep it simple :)

  0x7E bug check code
  http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

  Norton could be part of the problem but leave that for now.

  The amount of RAM is installed? Have you recently made any cham = nges?

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Unusable Illustrator - please help

  Adobe please help! I started with illustrator and became completely unusable. The selection tool does not work properly. The zoom tool is random. Better I'll show you a video of the behavior. I need urgent assistance to resolve this problem. It has been intermittent, but I can't erase this today and I have a responsibility to do it in Illustrator. Short of reformat the computer, I'm at my wits end

  tosser,

  Try the list (5) is hardly relevant here):

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• My ipod screen is black and I can not turn on, please help

  Hi my iPod Touch 5th generation 16 GB, exploded some 2 to 3 months ago. I turned on, but he couldn't come. I loaded but there was no indication that he was in charge. I connected it to my computer but itunes does not read, the screen is all black all the way. Please help me set up my iPod and the recovery/rehabilitation to zero.

  Thank you very much

  Did you try restarting force (now Home and power keys rack for 20 sec)?

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892