WRT1900AC with WRT110 AP cannot see through NAS WRT110

Similar Questions

• Windows Magnifier works correctly, except that the window is opaque - cannot see through it.

  When I start the Magnifier it works well except that the window is opaque - cannot see through it.

  Hello Allen,.

  Something for to try you. Its called remove a wrong color profile. Go to control panel, then select color management. When this window opens be sure that the display on the main screen is your screen (monitor), then below make sure that the check box use my settings for this device is checked. Then scroll to the bottom of the page, click the color profile, and click on delete. Make your selection and click close to return back.

  How the Magnifier works now? Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Satellite Pro L40 with realtek card: cannot see wlan Vista networks

  Hey

  You just bought the L40 (Realtek card) and it cannot see wireless networks. The diagnosis of Vista, is that the wireless adapter must be turned on. Then, it will fail to start. Function key and F8 (wireless on/off switch) does nothing.

  The wireless router is well - connected to an XP machine. I can connect to the router without a problem by using an ethernet cable.

  Running on the latest Microsoft drivers.

  Pointers much appreciated.

  Thank you
  Frank

  Hello

  you turned on the wireless the case switch on "ON"? Maybe you forgot this one, and this is perhaps the reason why it won´t work.

  Please check and make sure that you then use the FN + F8 switch.

  Would appreciate your comments on this...

  Welcome them

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.

• Cannot see/Run JCarousel with FireFox

  Cannot see/run JCarousel with Firefox.

  I am able to see the main image and the images over the primary image line; but the javascript code which changes at each successive image does not work.

  I can't run any JCarousel with FireFox. National Geographic is just one example of the most recent which does not work.

  You have quite a few extensions you installed that can cause problems like that (Adblock Plus, Ghostery).

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  • If you have many extensions then you first activate half test extensions that half the problem.

  Continue to divide the bad half that still has the question until you find that one is causing it.

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• Win 7 computer cannot see the computers on the network

  We have 3 computers on our network. A desktop computer running a laptop running Win 7 x 64, an office equipped with Win Vista and Win XP. All 3 are connected to the same workgroup and are properly connected to the internet. The two workstations can see and the laptop on the network and can move the files to the laptop, but the laptop cannot see other computers on the network. Whenever I try to open the network to move files to another computer, the icon just mouse sits and turns and the page remains blank. I thought that maybe he just needs time to see everything, left like that for hours without success. I went through all the troubleshooting steps in the win7 with nothing working Help Center. I don't understand why, if all the computers are on the same network, they can see me, but I don't see them. I am obviously connected properly so they can move the files to my computer. It may be unrelated, but I also can't update windows, keep getting error 80246008 when I try to run the update. Any suggestions on what I can do to fix this?

  Hello

  You can try the following steps and check whether the problem is resolved.

  Step 1:

  Networking of computers running different versions of Windows

   http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Step 2: Now, you will need to follow the links provided below to check if you are able to connect to the home network.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

   

  Step 3: Now, you will need to visit the link that will help you solve network problems.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Now, you can follow the steps in the link below

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  It will be useful.

• Host cannot see Local disk for VSANs

  Hello

  We are building our first host VSANs and fell at the first hurdle. Our host config is:

  IBM x 3650 m4 7915
  ServerRaid M5110e
  1 x 200GB SSD SATA
  1 x 600 GB 10 k SAS SSD
  IBM Vmware Hypervisor USB with 5.5 u1 image installed.

  The problem is that the esx host cannot see the 2 disks that are mounted. Lists under storage controller MegaRAID SAS merger adapters (not sure where he gets the name of merger of). When I click on the controller for 2 drives do not appear under devices or paths. If I go in to the RAID controller to start upward and configure drives individually to be RAID 0 then ESX sees the two discs, but unconsciously, cannot identify the Type of the SSD drive. I think that there is a work around that, but I know that's not ideal, and according to the vSAN HCL of the Raid Controller above supports passthrough. Get the pull-out hold to work turns out to be difficult, but I hope that it is just something simple, I missed. Someone at - it an idea where I should start looking?

  Thanks in advance.

  Thanks for the tip CHogan, it worked, but after reading the disadvantages of this method in your book "Essential Virtual SAN" I persisted for the pass-through to work on the raid controller.

  After some further research it turns out that I had to physically remove the RAID 1 GB Flash cache on the motherboard. In removing what it affects the RAID controller. He calls it. mode of TMI which allows for amp JBOD.

  Thanks to all for your responses.

• New ESX host cannot see SAN fiber - Clariion

  Hello

  I spent about two hours, passing through communities and have tried various things without success... basically, I have a new ESX host that I've built, configured, and networked, but I can't see our existing SAN.

  The SAN is a Clariion CX3 - 10 c and it hosts all of our existing VMs (we currently have two hosts attached to the SAN)

  I have installed the CLI and Navisphere agent on the new host

  I have started to host and that you have ENABLED the two adapters Emulex HBA (host contains two HBAs installed) because they showed as disabled by default BIOS

  I have one of the HBAs connected to the fibre switch

  On the fibre switch, I have a flickering green light where I plugged the fiber cable, which makes me think, it is connected OK

  On the HBA, I have a green light and an orange light blink, which still makes me think the wiring is correct

  BUT I do not see the front Navisphere host, and the host cannot see all storage even after re-reading.

  Any ideas what to try next? I suspect that it is perhaps something to do with zoning - I must say the Emulex HBA how to find storage processors? If so, how can I go about it? From the BIOS by restarting the host and pressing ALT - E?

  Any help or advice appreciated...

  Assuming that hard zoning this site should provide you with some

  Help

  http://TechNotes.twosmallcoins.com/?p=16

  Also once the switch is zoned if the host is not listed on

  the Clariion Navisphere agent system has a config file that needs to be updated

  with the IP addresses of the SPs.

  You can also manually enter the host if necessary, but your

  probably zoning question.

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

  I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

  It is a problem of carrier - I would like to talk with my carrier

  Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• WMC cannot see my Homerun Tuner now and it worked before

  Map double Tuner TV SiliconDust HomeRun

  WMC cannot see my Homerun Tuner now and it worked for a long time without problem before and WMC don't download the guide. He wants that I open the paper Guide of WMC and read it. But I can not find it?

  Hi Tommy,.

  quick question for you: what you use an antivirus/security program?
  Most of the time I have seen questions like these, it was because of an update an AV/security application, which changed its firewall settings.  Result: HUBERT pilots cannot communicate with the tuner; Media Center is no longer allowed outbound connections (eventually kill communication with the tuner, permanently killing the abilty to retrieve updates to the Guide.)

• I have verticle colored lines - from the bottom to the 1/2 in screen - I can see through them to read - I need to know the WAY to delete these lines

  I mâtinées verticle lines - from the bottom to the 1/2 in screen - I can see through them to read - I need to know the WAY to delete these lines - I once, a few years ago, removed, but they reappear - not my conscious fault - this is my old computer - A Compac - Windows 95 as an operating system

  Hello

  You should check with Support of Compaq, their documentation online and drivers,
  and ask in their forums about known issues.

  Microsoft product support has ended for Windows 95 a decade ago.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/|

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• XP service Pack 3 cannot see express airport

  XP service pack 3 cannot see the apple Airport express. No problem with the windows machine 7.  All thoughts

  Do you have airport utility installed?