Windows Magnifier works correctly, except that the window is opaque - cannot see through it.

Similar Questions

• OE6, XP works great except that the content of the file is missing on the screen, can only access using the 'next '.

  Can send & receive OK but if I click on any folder, IE, Inbox etc, I just see the first message that is completely open and displayed, not the list of messages for me to select a. It goes the same for files sent/deleted. To see others, the only way is to click on 'View', then select 'next '.

  View | Page layout. Is the preview pane checked or not?

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I have laptop Toshiba and windows 7, but my webcam is not working it shows that the device is locked by another application.

  I have laptop Toshiba and windows 7, but my webcam is not working it shows that the device is locked by another application. Help me please!

  For a built-in webcam see this support from manufacturers or their forums.

  You could I think trying a boot minimum http://support.microsoft.com/kb/929135 and see if its then OK

• My Windows 7 PC cannot see themselves on the network.

  My Windows 7 PC cannot see themselves on the network. Under the heading network in Windows Explorer when I try to extend the C drive, I get an error message saying that Windows cannot access it. Also, I can't access this PC from a PC in 10 Windows on the same network - this error message indicates that Windows cannot communicate with the device or resource. It is available, but it is unresponsive to attempts to connect.

  I have tried turning the firewall off temporarily, but this makes no difference.

  Can access my PC Windows 7 Windows 10 PC and a laptop Windows 7 without any problem.

  Integrated network diagnostics do not come to the top with something useful.

  OT:

  Windows 7 networking

  Hello

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  There could be several reasons for this cause and to diagnose the problem, we can try the following steps and check.

  Step 1: Check if the network discovery is turned on.

  Please refer to: enable or disable network discovery

  Step 2: Check Event Viewer for detailed information on the problem. Consult the following links.

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Step 3: Search the computer browser service, if it is running.

  1. click on Start, type services.msc in the start search.

  2. search for the computer browser service.

  3. right click on the computer browser service and select Properties. Check if it is started.

  4. If it is stopped, select Start or restart. Make sure that the service is started and set as Automatic.

  5. click apply and OK, if you make any changes.

  Step 4: Temporarily try to disable the antivirus on the computer program and check if the problem persists. If you are able to connect, you may need to check for updates and firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Disable the anti-virus software

  Step 5: Make sure that the name of the network working group is the same for all computers. Also try disabling some protected sharing and check for the issue.

  1. Open advanced sharing settings by clicking theStart button, thenControl Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2 click to expand the current network profile.

  3. by password protected sharing, click turn off password protected sharing, and then click save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, try to perform a SFC scan to see if it solves the problem. Read the following article.

  Use the System File Checker tool to repair missing or corrupted system files

  Also refer to:

  Networking of computers running different versions of Windows

  Why can't I connect to other computers?

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone.

  iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone. Male/female connection not relieve tight. Advice\help would be appreciated.

  Try a different cable - preferably a certified one MFI

  If this does not work

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• How can I control the working time so that the loop structure in the cases where the structure?

  Hi all

  My job is: Loop While structure generates the signal for 4 seconds when you press the 'start build' button, after that data has been backed up. You press the button "generate the beginning' once again, and the loop runs one again.

  My problem is: the first pressing, the loop, exactly 4 s (3, 999 s), but him second, third pressing on... The time elapsed is not 4 seconds, always smaller (even ~ s 0.003). The loop works correctly after press the "Exit" button and launch the program again.

  How can I control exactly time loop work While Structure without the press "Exit".

  Thank you any help!

  P/S: I used the number of cycles (ms) just to look at a working time of the While loop.

  NMCuong

  This shows a quick solution

  

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• IM tryin to download my RESUME in microsoft works, that is to say that the wps file type cannot download

  IM tryin to download my RESUME in microsoft works, that is to say that the wps file type cannot download

  Well, it means that people who want to take it back did not accept a Works file. Contact with them.

• I just bought Adobe audition on creative cloud, and it does not work. Said that the trial period is over

  I just bought Adobe audition on creative cloud, and it does not work. Said that the trial period is over

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  [moved from the download, installation, commissioning of Adobe Creative Cloud]

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• the activation server determined that the specified product key cannot be used to 0xC004C008

  Hello

  I'm running a server KMS on Windows server 2012 R2 and I have enabled more than 300 PC and servers.

  But for some reason, can no longer trigger the new PCs and servers. They get 0xc004c008 the activation server determined that the specified product key cannot be used.

  Nothing has changed on the KMS server and I do not see where the KMS host key could be used outside of the host itself.

  All ideas

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 7 Workgroup cannot see his own pc on network

  Had a problem with a small network of computers (5).  Some had defined homegroup, all removed from the home group and put in place a working group.  all works fine except a single computer.  Some may see it, others not.  The pc is not working cannot see themselves on the network, but everyone sees.  Why is he not being visible on the network including that the pc when the list is the list which is on its network, it sees not itself?

  Help!

  I solved the problem myself.

  I finished my network adapter using the following command as an administrator to reset:

  ipconfig/release

  ipconfig / renew

  netsh advfirewall reset

  netsh int ip reset c:\resetlog.txt

  He began to appear.

  I then had to go back into the early sharing and allow sharing of files.

  Seems to have everything cleared up.

• The activation server determined that the specified product key cannot be used.

  (windows 7 Professional) product key, I get from MSDN, through my college
  the key has been used first in my office and I've activated, it
  later, I formatted my desktop computer and install w7 in my laptop with the above product key
  so I find the product key will be impossible to activate windows

  Here are the details of the error:
  ---------------------------
  Error details
  ---------------------------
  The following information was found for this error:

  Code:

  0xC004C008

  Description:

  The activation server determined that the specified product key cannot be used.

  ---------------------------
  Ok
  ---------------------------

  pls help >
  THX in advance

  Hello

  Since you have already activated this product key, the server displays the key as being in use. Simply call the Activation Center and activate manually settle.

  1. press the Windows Logo key + R. This will bring up the run dialog box.

  2. in the Open: box, type slui 4 and press OK. This starts the manual activation wizard.

  3 select your country from the drop down and click Next.

  4. the wizard displays a toll-free telephone number. Leave the wizard open on the computer and call this phone number.

  You will receive a few saved options. Select the option to speak to a representative.

  The representative will manually activate this system for you.

  Let us know if you mhave more problems

  Ronnie Vernon MVP

• There is an error produced so that the definition of scanner when scanning through Windows photo gallery properties

  Original title: scanner MEM48U does not not under vista

  Hi, I use MEM48U scanner under xp. The scanner even when it is installed with vista installed and updated the driver. But when tried to browse the Windows Photo Gallery, it is said that a "error occurred when setting the scanner properties. If another program uses Pl waiting and let it fill. »

  Hello components,

  I couldn't even Memorex MEM48U on the site Web of Memorex. It must be abandoned. On other 3rd party sites, I found Windows XP and earlier operating systems drivers.
  If you try to use on a Windows Vista system, it may not work because of the lack of a Windows Vista driver.

  The Windows Vista Compatibility Center does not list this product compatible with Windows Vista. You can try to install in compatibility mode with Windows XP drivers and see if that helps.

  Run the installer in compatibility mode:

  1 right click on the file icon installation.
  2. click on properties > compatibility.
  3. Select the compatibility mode for Windows XP.
  4. click on OK.
  5. run the installation program.

  After installation, run the program in Windows XP compatibility mode by doing the same thing with the installed program.

  I hope this helps.

  Marilyn