WRT310N access to wireless hooked up in tandem with the modem router cable

Similar Questions

• Wireless camera does not work with the new router

  Hello, I'm having a problem with a camera D-Link DCS932L after you set up the EA4500.  The manual of the camera can be found here.

  http://d2okd4tdjucp2n.CloudFront.NET/DCs-932L_A1_Manual_v1.00 (NA) - en.PDF

  It worked fine with my old D-Link router.  The rest of the House has not had a problem with the EA4500.  There is a level of criticality around this camera certail and if I can't make it work, I'll have to return the router.  Configure the redirection of port as 5556 ~ 5559, TCP protocol (but I tried "Both" as well"with the IP address of the camera.  It still does not work.

  I craft but not in networks, i.e. I'm not stupid with tech but port quarrels is out of my comfort zone.  This camera with our old router setup took minutes.  I spent five hours trying to make it work on the EA4500.

  I guess you have the static IP value, or having a reserve of DHCP MAC address for the camera, network OK settings.

  What was the authentication wireless on the old router and that you use the new 4200?

  Is it possible that the camera does not support the encryption used by the 4200, i.e. wpa2-personal?

  Have you tried WEP to see if the unit works then?

• Dell Wireless 1395 WLAN can communicate with the Netgear router

  Everything works very well with my old HP laptop.
  Now, I also have a Dell Inspiron 1520 with a Dell wireless 1395 WLAN mini map. I can't links with my Netgear router using the new Dell. However, I can link to the top of my next "s"Linksys"router, but by very weak signal because of distance. How can I set up for my Dell to connect with my Netgear router?  I went through all the routines of wireless network of Microsoft AND Dell Wireless network routines.

  
  

• Why wireless keyboards are not compatible with the Apple TV (4th generation)?

  Why wireless keyboards are not compatible with the Apple TV (4th generation)?  Similarly, why didn't the App compatible with Apple TV Remote (4th generation)?  They will be in the future?

  No one here knows why Apple have so far decided not to support Bluetooth keyboards, or if they are likely to do so in the future. The iOS app is compatible with the 4 ATV in its latest version (4.2.3) - https://itunes.apple.com/gb/app/remote/id284417350?mt=8

• Boxes wireless printer work without connection to the modem HP 6700 printer

  My printer is located on the second floor of our House. It is connected to our network with the modem and the router to the first floor where my wife's computer. This connection works fine.

  My problem is that my printer only works if connected to my computer with a USB cable. This limits the use of a number of functions of the printer. Print the test pages that I myself say the printer is connected to the home network, but the printer will not work without the USB cable that turns off the Wireless function.

  Most of the instructions I've read show that I need to be connected to the modem downstairs to work. It is not possible that I can tell.

  Is there a way to fix this? or is a wireless connection to my printer not possible with this configuration?

  Thanks for your help

  Bill6700

  Bill,

  Welcome to the HP Forum.

  You don't mention what kind of computer of mystery that you have and try to use the printer.

  Assuming that the full feature software is available for the operating system of your computer, this may solve the problem - multiple computers can print once installed wireless printing software.  I hope that your computer is among the supported systems.

  General instructions to install the printer software

  Reminder:

  1. In most cases, the Solution Center has been replaced by the wizard of the printer.
  2. Shortcuts to the Printer Wizard must be installed on your desktop during the last part of the installation.

  Windows operating system:

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open printer HP Officejet 6700 Premium e-All-in-One - H711n drivers
  • Enter your operating system the menu drop-down
  • Click NEXT and scroll down
  • Find the driver - product Installation software category
  • Select the driver of base, e-print, or full software functionality
  • Save the package *.exe Setup on your computer

  The files will probably save in the "folder"downloads. "

  Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  • Scroll through the list of videos back until you find the video that best fits your situation.
  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including your Manual, sections for Troubleshooting > How-to's, Troubleshooting > solving a problemand alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• Wireless printer does not work with the laptop running Windows 7

  Running Windows 7 on my HP laptop.  Have HP Photosmart all in one and scheduled to run through the Setup program on the printer wireless.  When I print a doc goes to the printer IT does not print on paper.  Find CD for printer.  It is not compatible with Win 7 then went to HP & downloaded driver.  Still can not get kicked out of the doc.  What to do next?

  The following Support HP for the Photosmart Wireless all-in-One deals with the issues where there is no response from the printer: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=4022343
  They also have diagnostic utilities that can help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03291586&cc=us&dlc=en&lang=en&lc=en&product=4022343

  and the additional support: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=4022343&

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• a wireless logitech keyboard will work with the Sony Bravia KDL-32W650A?

  We bought a Smart TV... and have been sold to a wireless logitech with her keyboard. The mouse worked on one screen... but the keyboard doesn't seem to work. From what I found online, looks like the TV is not compatible with a wireless keyboard... However, the sales representative assured us they had it working at the store.

  Hi K_Randall!

• LG Wireless adapter upward adjustment to work with the WRT54G Router

  My parents recently bought a TV high definition LG and they got a wireless adapter to LG for it (YEAR-WF100). My brother was able to insall, but when trying to connect to the router, we get an error message saying DHCP must be enabled. From what I see when I go in the settings of the router, DHCP is enabled. We are pulling our hair out trying to figure out what we need on the router so that it works settings. We tried the two setting up the connection manually and automatically with the IP, gateway, etc. I don't know what other information is needed, but I'll give you more details if anyone has any ideas. We have also two apps created by Applications and games tab (Nintendo DS and Wii). I do not know if that might interfere with anything. Any help would be appreciated!

  After spending two hours on the phone with the Geek Squad (Fortunately it was free), we found the problem is that the router was set to WEP settings, and it must be WPA. Too bad the Nintendo DS only supports WEP. I guess I can just switch back to WEP when I go online on the DS. Thank you for taking the time to help!

• HP Officejet Pro 8000 Wireless will not be printed with the iPhone 5 s

  This printer as wireless that I bought used printing with IPhone or iPad in 2011 because is not on the list of Air printing devices so I was told by HP to buy a new and as it was not equipped "Eprint" HP app which is there to deal with it will not work. I was talking to sales person to avoid paying, but I can't believe this. There are printers better but makes no cela a throw away. and who wants to buy a wireless printer that used to print wirelessly? Help!

  Hi Hank, there.

  Sorry to hear that you are having a rough go with the printer.

  With respect to the 8000 wireless, I guess you've got a newbie on the phone tech rep. I couldn't understand why they said there is no work around, because I was able to get the older printers with HP troubleshooting documents. Some so that might help:

  1. install the printer on your network (if it isn't already) the software of the printer for a wireless network connection

  2. download the HP Mobile E-Print app for iOS. It should still work with non-eprint printers: https://itunes.apple.com/ca/app/hp-eprint/id299531647?mt=8

  3 take a look at this video tutorial for tips on getting started: http://www.youtube.com/watch?v=l1z1pSC8WHI

  Hope this helps

• Dell Tablet wireless keyboard does not not with the venue of Dell Pro 8

  All,

  I bought my wife a venue of Dell Pro 8 for Christmas and the Tablet Dell Wireless Keyboard.   The keyboard has been delayed until after Christmas and just arrived, but we will have problems to run.  We paired up it and controls volume and brightness keys work fine but if none of the keys work.  The Tablet click on w I also nothen you hit but no letters don't appear in the word or the IE address bar.

  We have a defective keyboard?

  Scott

  Hi Lou,

  Thank you for taking the time to answer, but as I said, we had no problem of this pairing and some of the keys worked (volume and brightness controls).

  I found the solution to the problem which has been updated from the BIOS.  It seems that the aircraft delivered in December with the original BIOS A01.  We ran a Dell utility provided with the tablet that he upgrade A03, whereupon the wireless keyboard worked fine.

  Thanks for trying to help!

  Scott

• With the help of RV016 with DSL modem/router/wireless

  I have a question of configuration that will probably seem obvious to many readers, please go easy on me: I'm new to this.  I used a RV016 because it will allow me to have the diversity and conservation of roads to the internet for our SMEs.  Since we are now counting on the insurance and processing of credit cards that is the Internet, I won't be down if the cable company fails, so I added the DSL service.  When DSL service arrived, the carrier provided a modem Motorola 3347 which includes the router, switch and wireless in one device.  Instead of installing a WAP browser, I would like to use the 3347 wireless.

  However, users on the wireless cannot print to printers on the RV016.  Is it possible that I can make visible printers to wireless users?

  Photo shows the problem...

  

  Yet once, guess I am missing the point and GENTLY try to educate myself.

  Thank you very much.

  Hi Cunnida56

  If I remember the RV016 is installed in what called default gateway mode and you will have to be in router mode.

  Gateway mode essentially allows NAT (NAT) services, so that the LAN is coordinated against the WAN IP address.

  You have an option under Setup > advanced routing to assign the RV016 router, mode option and save the settings.

  In router mode NAT is disabled, but you also have to disable the SPI Firewall options and block Wan requests, all of these options are found under the Firewall tab.

  Your next step is to add a static route in the motorola 3347 that points to the 192.168.2.0 network.

  This static route will allow wireless clients to know the WAN1 address the RV016, who will act as a gateway to the 192.168.2.0 network.

  Good luck.. and have fun, do not forget to save or to apply your chages as you go.

  Best regards, Dave

• I have a printer installation on a desktop wireless wireless, how the wireless printer can be shared with the main PC

  Windows 7 PC main with modem and router

  PC Windows 7 other connection via WIRELESS and a wireless HP OfficejetPro 8600
  Problem: How to print on the printer without wire of the main PC

  Check the IP address allocated to the printer.

  On the PC, add a new printer in devices and printers, scanning the network for the printer that needs to be automatically detected, confirm with the IP address.

• Wireless network connection is connected with the strong signal, but stops working at random times

  Original title: internet says is connected with the strong signal, but stops working at random times?

  Hello
  For the last few weeks, I had problems with my internet connection. Wireless connections say I am connected and have the strength of the excellent signal. I know that this is not an ISP problem because my other computer works fine. I will be reviewed fine and then all of a sudden, the site doesn't load any more, although I'm always connected to the internet. This happens on Firefox and Internet Explorer, this isn't a browser issue.

  I read other offered on the internet and tried all, but nothing has changed. I have checked proxies, disabled antivirus and installed new, checked firewall, ran a check for malware, etc..

  Any help will be much appreciated because it becomes very frustrating to have to keep reconnected my internet when he says he's working.

  Hello

  I suggest you follow the links below and check them with the question:

  Method 1:

  Step 1:

  Start your computer in safe mode with network and check the number: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters, and then click on uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  For reference:

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  I hope this helps.