WRT310N as Repeater WAP?

Similar Questions

• using configuration Repeater WAP4410N

  Hello

  I have a network connected directly to a wap4410n device to allow my laptop to comminucate with her wireless. I need an extra blanket wireless added an another WAP4410 as an additional access point to connect wireless to the original WAP.

  However comes as two separate networks and if I connect to the second WAP it won't comminucate with my network device.

  Network device - WAP4410N--><----WAP4410N--->                   <>

  192.168.1.100 192.168.1.244 129.168.1.243 192.168.1.10

  set as defined as reapeater Access Point?

  with option with MAC & SSID of

  connect the main Repeater access point

  Is there a guide of configuration for this sort of thing. I disabled all the securities that I didn't need and everything has fixed Ip addresses.

  Concerning

  Tony.

  Hello and welcome to the community at the homepage of Cisco!

  WAP4410N is now the Cisco Small Business Support Community.

  You will need to create an account in order to post here.

• Repeat a Repeater

  Hello

  I try to get a Linksys WAP54G to repeat an another WAP54G put in place as a Repeater as well (in fact, increasing the distance between the access point).  The other is to repeat a WRT54G configured as AP.

  Is it still possible?

  And, if so, how to set up the units?

  BTW, the system now works fine - both the WRT and WAP are send and receive signals without problems.

  Thank you!

  Replicating settings from the first on the second WAP54G WAP54G.

  The second WAP54G differences will be.

  Camera IP, this must be unique.

  MAC address in the Repeater mode MAC filter table will be the MAC address of the first WAP54G.

  All other settings will be the same.

  Concerning

  Fred

• WAP54G (v3.1) in Repeater Mode to WRT54G (v5) will not affect the IP via DHCP

  Hi, I just installed a WAP54G Access Point and define the AP as REPEATER mode.  I followed all the instructions, including the seizure of the MAC address of the router (WRT54G).  The signal seems to have substantially improved by the WAP in Repeater mode, but I can't connect to the wireless network as an IP is not able to attribute.  I tried different laptops running different wireless cards and get the same result.  Two (for WAP and the WRT) MAC addresses appear in the "monitor of the site" the utility of the wi - fi card (of course, WAP is the most powerful signal), but it fails when it tries to acquire a network address.  If I move the laptop closer to the WRT, assigns an IP address physically & I can connect, I just can't get the router to pass the IP address through repetition to the laptop.  I have updated the firmware on the two WRT & WAP.  No difference.

  Any help would be greatly appreciated!

  Ed Lefkowitz

  Montgomery County, Maryland Government

  Fred, you're a genius! Who did the trick!  Live and learn.  I had no idea there is more than one MAC on the WRT54G.  I appreciate your help.  Super Bravo to you.

  -Ed.

• WAP2000 as Repeater with PoE only

  Hello

  I don't know if this has been discussed before, but I Coulnd't ' t find information specific to that regard.

  Our client installation program requires a WAP open-air (main WAP) and two repeters of wireless signal (which will be WAP2000). Coaches will be powered via Ethernet only and will be connected to the same switch as the main WAP (unknown vendor). My question is:

  A WAP2000 will work smoothly as a Repeater when it is powered only by Ethernet and connected to the same switch as it is the main WAP?

  The question may seem strange, but during my previous installations, I noticed that connected WAP2000 this way was kind of 'lost' by deciding to repeat a signal or work as an independent wireless access point. The problem was immediately withdrawn once recurrence has been disconnected from the switch and powered by a power outlet. I don't know if it was wrong to approach the program installation or something else that was necessary to check/uncheck. To avoid these problems in my future facilities, could you tell me please?

  Thank you.

  Hi Raimondas, if you repeat while cables, it will make a network loop. The repeated signal is "1-wire" while material in the LAN is another thread. If you plan to repeat is devices that they cannot have more than one LAN connection wired or wireless.

  -Tom
  Please mark replied messages useful

• How to configure Aironet autonomous 1602i WAP

  Hi all.  I have 4 Aironet 1130AG autonomous WAP and I must add on 2 Aironet autonomous 1602i WAP as repeaters to extend the same network.  Is it possible for me to save the configuration of a 1130AG that is configured as a Repeater and then download on WAP 1602i?  Or do I need to manually set up the WAP 1602i as repeaters?  Thank you.

  Just in case, here is an older guide

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_3g_JA/CONFIGU...

  Sent by Cisco Support technique iPhone App

• Impossible to get background image to NOT repeat

  http://www.workandpartners.com/WAP/news.htm

  http://www.workandpartners.com/WAP/WAP.CSS

  Page is an accordion style, and when the page extends down at the opening of the links, the background image is repeated despite this CSS

  {.tdmid newsart
  background-image: url(images/mid-newsart.jpg);
  background-repeat: no-repeat;
  height: 401px;
  Width: 720px;
  vertical-align: middle;
  Color: #000000;
  do-size: 12px;
  line-height: 25px;
  do-family: Tahoma, Helvetica, myriad;
  }

  Any help will be appreciated indeed.

  TIA

  Hello Kenneth,

  There would be other ways to do it I don't know, but somehow, in your html source, you have:

   

     

  Change to this:

   

     

  And in your CSS , you must:

  {.tdmid newsart

  background - image: URL(images/Mid-newsart.jpg);

  background-repeat: repeat no.;

  Color: #000000;

  do-family: Tahoma, Helvetica, myriad;

  do-size: 12px;

  height: 401px;

  line-height: 25px;

  vertical-align: middle;

  Width: 720px;

  }

  Change to this:

  {.tdmid newsart

  background - image: URL(images/Mid-newsart.jpg);

  background-repeat: repeat no.;

  background-color: #fff;    / * If you want a white bacgroung after the image * /.

  Color: #000000;

  do-family: Tahoma, Helvetica, myriad;

  do-size: 12px;

  height: 401px;

  line-height: 25px;

  vertical-align: middle;

  Width: 720px;

  }

  It may be useful

  Post edited by: speculumcm

• Why is wifi repeatedly turn to the?

  Why is wifi repeatedly turn to the 'settings' in a few minutes?

  Read here: connect to Wi-Fi on your iPhone, iPad or iPod touch - Apple Support

  Note: Restart your Wi - Fi connection and also check if your wireless router has a firmware update from the manufacturer

• MacBook Pro hard repeated panics of the kernel

  Hello

  I knew panic the kernel repeated on my MacBook Pro (retina, 15 inch, mid-2014). In general, a piece of software will be "quit unexpectedly" a few times (Web Safari, Mail, Finder content). Then, randomly, the system will be completely freeze two seconds and restart.

  I tried running with the system in Mode safe, but panicking kernel continue to hinder. Then I erased the hard drive and reinstalled the new El Capitan (and later upgrade to Sierra). I continued to experiment with these error messages and panics of the kernel, which I can only assume means that I have a hardware problem.

  I take the unit to a Genius Bar next week, but in the meantime, I was wondering if someone could look over panic report and identify a possible cause? I have never added or changed everything - the MacBook is exactly as it was when I bought it.

  Panic report *.

  panic (cpu 6 0xffffff80013ef077 appellant): "Possible memory corruption: pmap_pv_remove (0xffffff80208925e0, 0x10f621000, 0 x 40, 0 40000, 0xffffff81e9943b8c, 0xffffff81e9943b80): pv_list null!" @/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3789.1.32/osfmk/i386/pm ap_internal.h:786

  Backtrace (CPU 6), frame: return address

  0xffffff81e99439b0: 0xffffff80012f748c

  0xffffff81e9943a30: 0xffffff80013ef077

  0xffffff81e9943bc0: 0xffffff80013735e1

  0xffffff81e9943d50: 0xffffff8001374ea5

  0xffffff81e9943f30: 0xffffff800140a35c

  0xffffff81e9943fb0: 0xffffff80012a9655

  The process corresponding to the current thread BSD name: ReportCrash

  Mac OS version:

  A 16, 323

  Kernel version:

  16.0.0 Darwin kernel version: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

  Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

  Slide kernel: 0 x 0000000001000000

  Text of core base: 0xffffff8001200000

  Text __HIB base: 0xffffff8001100000

  Name of system model: MacBookPro11, 2 (Mac-3CBD00234E554E41)

  Availability of the system in nanoseconds: 618091097144

  last load kext to 499153283898: com.apple.iokit.IOBluetoothUSBDFU 5.0.0f18 (addr 0xffffff7f8418c000 size 12288)

  Finally unloaded kext to 379778273675: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f83523000 size 40960)

  kexts responsible:

  com.apple.iokit.IOBluetoothUSBDFU 5.0.0f18

  com.apple.driver.AppleUSBTCKeyEventDriver 251

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.ApplePlatformEnabler 2.7.0d0

  com.apple.driver.AGPM 110.23.7

  com.apple.driver.X86PlatformShim 1.0.0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.13.60

  com.apple.driver.AppleHDA 276.26

  com.apple.driver.AppleUpstreamUserClient 3.6.4

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 5.0.0f18

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleIntelHD5000Graphics 10.1.8

  com.apple.driver.AppleBacklight 170.9.10

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 5.0.0f18

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleCameraInterface 5.57.0

  com.apple.driver.AppleIntelFramebufferAzul 10.1.8

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleUSBCardReader 404.1.1

  com.apple.driver.AppleUSBTCButtons 251

  com.apple.driver.AppleUSBTCKeyboard 251

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 39

  com Apple.filesystems.HFS.kext 366.1.1

  com.apple.iokit.IOAHCIBlockStorage 295.1.1

  com.apple.driver.AppleAHCIPort 326

  com.apple.driver.AirPort.Brcm4360 1100.37.1a16

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 5.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 5.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 171

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com Apple.Driver.USB.cdc 5.0.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 276.26

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOSurface 152

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 5.0.0f18

  com.apple.iokit.IOBluetoothHostControllerTransport 5.0.0f18

  com.apple.iokit.IOBluetoothFamily 5.0.0f18

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleGraphicsControl 3.13.60

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d8

  com.apple.AppleGraphicsDeviceControl 3.13.60

  com.apple.iokit.IOAcceleratorFamily2 288.13

  com.apple.driver.AppleHDAController 276.26

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOHDAFamily 276.26

  com.apple.iokit.IOAudioFamily 205.11

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSCSIBlockCommandsDevice 394

  com.apple.iokit.IOUSBMassStorageDriver 131.1.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 394

  com.apple.driver.usb.AppleUSBHub 1.1

  com.apple.driver.AppleUSBMultitouch 258

  com.apple.driver.usb.IOUSBHostHIDDevice 1.1

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.1

  com.apple.driver.CoreStorage 540

  com Apple.filesystems.HFS.Encodings.kext 1

  com.apple.iokit.IOAHCIFamily 288

  com.apple.driver.AppleThunderboltDPInAdapter 4.5.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.5.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.3

  com.apple.driver.AppleThunderboltNHI 4.1.3

  com.apple.iokit.IOThunderboltFamily 6.2.1

  com.apple.iokit.IO80211Family 1200.12.2

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBHostPacketFilter 1.0

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.1

  com.apple.driver.usb.AppleUSBXHCI 1.1

  com.apple.iokit.IOUSBHostFamily 1.1

  com.apple.driver.AppleUSBHostMergeProperties 1.1

  com.apple.driver.AppleEFINVRAM 2.1

  com.apple.driver.AppleBusPowerController 1.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 444

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 5.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.21.171.10.1a16)

  Bluetooth: Version 5.0.0f18, 3 services, 27 aircraft, 1 incoming serial ports

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x802C, 0x31364B544631473634485A2D314736453120

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x802C, 0x31364B544631473634485A2D314736453120

  USB device: USB 3.0 Bus

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  Serial ATA Device: APPLE SM0256F, 251 GB SSD

  Model: MacBookPro11 2, MBP112.0138.B17 of BootROM, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, MSC 2.18f15

  Network service: Wi - Fi, AirPort, en0

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Model: MacBookPro11 2, MBP112.0138.B17 of BootROM, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, MSC 2.18f15

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x802C, 0x31364B544631473634485A2D314736453120

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x802C, 0x31364B544631473634485A2D314736453120

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.21.171.10.1a16)

  Bluetooth: Version 5.0.0f18, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SM0256F, 251 GB SSD

  USB device: USB 3.0 Bus

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  Bus crush: MacBook Pro, Apple Inc., 17.1

  You seem running unmodified Mac OS (no third party kernel extensions added). Mac OS do not plant this way. You should pay attention to this statement in the accident report:

  panic (cpu 6 0xffffff80013ef077 appellant): "Possible memory corruption:

• Repeat functions

  I have a function A and I stated that this function.

  I would like this feature to repeat itself

  For example,.

  I have 2 buttons called B and C

  When the user clicks on B A c and when the user click on do A and C

  I want to just write the code for the function once

  the code I want to see her like this

  A = {1 + 2-3 * 4}

  When you click on do A B

  When the user clicks on the C c A

  Instead

  When you click B do {1 + 2-3 * 4}

  When the user clicks on the C {1 + 2-3 * 4}

  Problem is solved

• I can't update the software on my iPad iOS version 10.0.2 it repeat to myself that my 9.3.5 version is the latest update available...

  I can't update my iPad iOS 10.0.2 it repeat to myself that my current version 9.3.5 is the most recent available.  How can I update my iPad? When I have it plugged into my laptop it also says that my iPad is up-to-date.

  A first generation iPad mini is not powerful enough to run iOS 10; they require an A6 or better CPU.

  (144965)

• Why a strange alphabet does not appear when I type in an address box. Integration is slow and hesitant and numbers and letters are often repeated on their own?

  I use the new Sierra, but the problem predates this.

  Whenever I am typing a command or an address, a strange alphabet appears with blue letters and numbers below. The stalls, insertion and numbers and letters and then repeat on their own. I can't get out.

  This problem comes and goes, no real reason for when it happens.

  It happens when I type in the Web addresses, etc., and when I type the commands of the operating system.

  Can you give more information on mac hardware.

  You can download and run the latest version 3.0.5 of Etrecheck (etrecheck.com)

  and post it here please.

• Repeat Mode music Apple

  Hi, I've just updated to iOS 10 and since then, Apple music, when I mix my library, keep repeating the first song and repeating, it all just not advance the following and I can´t find how to disable the "repeat" mode, someone has a solution? Thanks in advance. Concerning

  I just fixed mine! Play a song, open to full screen, slide up and it'll show next door, there is a little symbol he repeats and just uncheck it

  http://www.techtimes.com/articles/178947/20160922/turn-song-repeats-new-Apple-Mu sic - app.htm

• How to stop the album in music to repeat on the iPhone 6

  6, 64 GB, iOS 10.0.1, updated iPhone apps

  I like listening to an album all to fall asleep. With an old iPod and a SoundDock, the album stops playing after it's over. With my iPhone 6, the album - or perhaps an individual song - continues to play all night when I'm using EarPods or just have the phone close to home. How to stop repeating? Do I have to click on each track and make sure that the symbol of repetition is turned off, or there at - it a way to stop the whole album to repeat?

  Off tell Siri 'Repeat '.

  TT2

• E-mail, deleted repeat it on Total iPhone on iPhone iPad continues to increase.

  10.01 iOS, iPhone 5, iPad, iPad Pro Air.  I usually do my email on my pro. The e-mails I delete on my Pro, always appear on my other two devices, getting up to 80 e-mails. They also repeat on my pro after deletion. Y at - it a way to remove on one and have it remove all?

  Apple7550 wrote:

  Y at - it a way to remove on one and have it remove all?

  Yes, but you should use IMAP or Exchange account. Looks like you are using a POP3 e-mail account. If you tell us who is your email provider, we can help you with the settings.