WAP2000 as Repeater with PoE only

Similar Questions

• Are there plans for the new ESW 500 models switch with PoE capability?

  I know that current models of ESW 500 switch don't have enough capacity to power all the switchports to 15.4, even if the ESW-540-8 p model has almost enough capacity to power all the switchports to 15.4.

  Reasons why new ESW 500 switch with PoE capacity are necessary:

  • The existing PoE 500 ESW switches have not always enough when these devices are deployed with the UC500:
    • 7945, 7965 and 797 x phones
    • series phones (not yet supported with the SBCS solution) 9900 and 8900
    • PVC2300 Surveillance Cameras
    • AP541N access points
  • The UC560 comes with all the PoE ports and requires at least an ESW switch be deployed
  • Version 48 ports gigabit switch ESW is currently available only in the version not PoE, and we need a version of 48 gigabit ports for users of the UC560 solution.

  Existing ESW 500 switch PoE capabilities are:

  • ESW-520-8 P: 60W
  • ESW-540-8 P: 120W
  • ESW-520-24 P: 180W
  • ESW-540-48P: 380W
  • ESW-540-24 P: 280W

  PoE of ESW 500 switch capabilities supporting 15.4 full power on all PoE PoE ports are:

  • 8 port: 123.2W
  • 24 port: 369.6W
  • 48 port: 739.2W

  Are there plans to release the new ESW 500 switch models increased capacity, enough to supply the full 15.4 to all PoE ports with PoE?

  Hi John - Thank you for your participation in the small community of business support. I talked to our switch product manager and want to share his response.

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  We have taken the conscious decision to deliver PoE as ESW and other switches for small businesses for several reasons:

  • Endpoints PoE more attract a lot less than the 15.4 W maximum power. Most IP phones are below the range of 7W.
  • A typical deployment would most PoE devices connect to a switch.
  • For these reasons, the ESW is not burdened cost with the PoE feature which would not be used most of the time.
  • All ports are still able to PoE you can connect up to 24 devices PoE Switch 24 ports to any point in time, as long as the handset is in the title of the budget.
  • Therefore, given that these products are intended for small business and the price is an important factor, we opted for this approach.

  We do not have a product at full power on all ports in the Cisco Small Business portfolio, except in the arena of 8 channels. Within Cisco, Cisco Catalyst products support this today.

  Thanks again for the question,

  Stephanie Reaves

  Cisco Small Business

• Performance on the Repeater with DataPrvider

  Just using a tile object with a Repeater in one related to a dataprovider. I use this to generate a bunch of thumbnails of images for a photoblog experience. However, it seems to be performing incredibly slowly when you do any reasonable amount of numbers. For example if I make an array of 100 images (which isn't a lot) it takes forever and quite frequently crashes Internet Explorer. Out the dataprovider element it accelerates in the output window that I created where I just write on the table but of course defeats the whole purpose. Am I missing something stupid here? If it is not for this? This in flash 8 would write out in a pardon flash, the play on words... Don't understand, even when I write just Plains without an image in there boxes, it takes forever. I'm sure that this is not intended to be the case that some examples of this where I saw it, it was the same. The example of flickr on the flex examples page did the same thing.
  
  Is there a better way to do this or is this the only and best solution flex can offer. If yes its back to Flash I'm afraid that would be a shame as flex seems to have some nice features.
  
  Code pasted below, if anyone can help...
  
  
  hand. MXML
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < mx:Application
  ' xmlns:MX =' http://www.adobe.com/2006/mxml '
  layout = "absolute".
  backgroundGradientColors = "[#000000, #383838].
  init = "onCreationComplete (event)"; xmlns:local = "*" >
  
  
  < mx:Script >
  <! [CDATA]
  
  Import mx.collections.ArrayCollection;
  Import mx.utils.ObjectProxy;
  import flash.filters. *.
  import flash.display. *;
  
  [Bindable]
  public var photos: ArrayCollection collection = new ArrayCollection ([]);
  public void onCreationComplete(_event:Event):void {}
  Writelist() ();
  for (var i: int = 0; i < 100; i ++) {}
  var oTempObj:ObjectProxy = new ObjectProxy ({name: 'LisaThumb.jpg'})
  photos.addItem (new ObjectProxy({name:'LisaThumb.jpg'}));)
  // };
  };
  
  public function Writelist() (): void {}
  for (var i: int = 0; i < 100; i ++) {}
  var oTempObj:ObjectProxy = new ObjectProxy ({name: 'LisaThumb.jpg'})
  photos.addItem (new ObjectProxy({name:'LisaThumb.jpg'}));)
  & Text0.htmlText = I + "< br / > ';
  };
  };
  
  public void imageClicked (event:flash.events.MouseEvent): void {}
  var selectedItem = Thumbnail (event.currentTarget);
  trace (SelectedItem);
  }
  
  []] >
  < / mx:Script >
  
  < mx:Canvas id = "myContainer" left = "10" top = "10" right = "10" low = "10" >
  
  < mx:Tile id = "myTile" left = "10" direction = "horizontal" top = "150" right = "300" low = "30" borderStyle = borderThickness 'solid' = '7' borderColor = "#414141" paddingTop = "10" paddingBottom = "10" paddingRight = "10" paddingLeft = "10" verticalGap = "10" horizontalGap = "10" >
  < mx:Repeater id = "PR" dataProvider = "{photos}" >
  "< click =" imageClicked (event) "local: thumbnail" data = "{rp.currentItem}" index = "{rp.currentIndex}" / >
  < / mx:Repeater >
  < / mx:Tile >
  
  < mx:TextArea id = "text0" text = "This is where my text will" width = "280" right = "10" low = "30" top = "200" fontFamily = "Times New Roman" fontSize = "14" / >
  < mx:HBox backgroundColor = "#414141" left = "10" right = "10" top = "10" height = "90" >
  < / mx:HBox >
  < mx:HBox backgroundColor = "#df285e" left = "10" right = "10" top = "110" height = "30" >
  < / mx:HBox >
  < mx:Button click = "Writelist() () ' y = '150' label ="List of writing"right ="10"/ >"
  < / mx:Canvas >
  < / mx:Application >
  
  
  
  Thumbnail.MXML
  
  
  <? XML version = "1.0" encoding = "utf-8"? >
  
  "" < mx:Canvas xmlns:mx = ' http://www.adobe.com/2006/mxml " width ="150"height ="150"backgroundColor ="#414141">
  < mx:Script >
  <! [CDATA]
  
  public var int index = 0;
  
  []] >
  < / mx:Script >
  
  < mx:Parallel id = "darken" >
  < mx: bland alphaFrom = ".4" = ".2" duration alphaTo = "500" target = "{context}" / >
  < / mx:Parallel >
  < mx:Parallel id = "brighten" >
  < mx: bland alphaFrom = alphaTo ".2" = ".4" duration = "500" target = "{context}" / >
  < / mx:Parallel >
  
  < mx:Canvas id = "framework" x = "0" y = "0".
  Width = "150".
  height = '150 '.
  Alpha = ".2.
  Visible = "true".
  rollOverEffect = "brighten".
  rollOutEffect = "darken".
  >
  
  
  < / mx:Canvas >
  <!-< mx:Label text = "LOADING" left = "10" right = "10" textAlign = "center" red = "0" color = "#ffffff" fontWeight = "bold" / >
  < mx:Image useHandCursor = "true" source = "LisaThumb.jpg" width = "130" height = "130" left = "10" top = "10" / >--> "
  < / mx:Canvas >
  
  
  

  On a Repeater with a tile for the images, it's something I've done many times with reasonable performance. But I see a red flag in your code. In your function of Writelist() you use addItem on the collection. That's right, but the collection is dynamically bound to the Repeater - also OK. Normally, you want this so that the changes can be picked up and reflected in the user interface.

  However, to do so in a loop can cause the Repeater for re - run of the code and re - create components. I recommend that do you these two things:

  1. in the Writelist(), before the loop: photos.disableAutoUpdate (); and then, after the loop do photos.enableAutoUpdate (). This will prevent the collection of change in the middle of the loop of distribution events.

  2. Add recycleChildren = "true" to the rehearsal. This will ensure that the Repeater does not create any unnecessary components.

• When I sync my ipod touch with itunes only the first song is downloaded and then he sits for hours

  When I try to sync my ipod touch with iTunes, only the first song seems to be downloaded, then he just "hangs" for hours

  What happens if you try to synchronize not this first song and next song?

  What is listed n the block status of iTunes when it freezes?

• Problem of sound with Skype only - HP Pavilion laptop Windows 7 x 64

  I have problems with the sound with Skype only - all other software that requires a sound work fine.  I don't hear my correspondent.  My Skype settings seem to agree and I get no error message.

  I run 7 x 64 window.  I have a laptop HP Pavilion G7.

  Any help?

  Hello

  Sorry, you have problems. For Windows 7, try this:
  
  Sign in to Skype. Click Tools at the top of the window, and then select Options in the menu drop-down. Click Audio settings in the left pane. Under the speakers, you can:

  • Use the Volume slider to adjust the volume.
  • Click on the arrow down in the drop-down menu to select the appropriate stakeholders.
  • Test the speakers by clicking on the green arrow next to the drop-down list of speakers.
  • Click on the link to make a free test call to make a test call.

  It may be a good idea to plug a headset as a test to see if it works. You don't need a headset with a microphone; Just use any headset allows you to listen to your music on your iPod. The nice thing about using a stereo headset is that you can always talk through the microphone on your computer, but only you will hear responses from your correspondents, and is as much your comments.

  Skype has a document of support practice that may help you: I can't hear my friend... (Windows desktop) .

  And now, the delicate question: it is possible that your friend accidentally cut his microphone? Or what is happening with all of your calls?

• WNDR3400V2 (RN600) router - wireless repeating with Wireless Modem Arris

  I need help. I have an Arris wifi Modem (TG862) - recently installed when moving into a new House and the signature to the top for cable internet. I have a problem with weak wifi signal in the rear rooms - with signal drop. I have the spare WNDR3400V2 - so, how can I use it to boost my signal, preferably wireless? I have trouble to get the right settings when you configure as Repeater with different guides does not not exactly to my hardware. I don't have too much knowledge on this and how do it, but any help will be appreciated. The PC in the bedroom becomes signal well enough, I'm fighting to get compatible with phones wifi...

  In order to strengthen the signal on the desired location, run a long ethernet cable from the modem to the NETGEAR router.

  Still, there is no way for these 2 devices to be connected wireless to the other.

• How to recover an Xbox Live account with knowing only the gamertag?

  How to recover an Xbox Live account with knowing only the gamertag?

  How to recover an Xbox Live account with knowing only the gamertag?

  Hello

  You will need to contact XBox support for these issues.

  Directory of Xbox Forums - Xbox.com: http://www.xbox.com/en-US/forums

  Contact us - Xbox.com: http://support.xbox.com/en-US/contact-us

  Xbox.com: Solve common problems: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Xbox LIVE content help - Xbox.com:
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/purchase-Xbox-Live-content

  Billing and subscriptions - Xbox.com:

  http://support.Xbox.com/en-us/browse?product=billing-and-subscriptions

  Concerning

• Wired router with POE and Gigabit ethernet to run two AC1750 access points?

  Hello, I'm looking for a recommendation for a wired router with POE and Gigabit ethernet to connect to both access to ceiling LinkSys AC1750 points internet routing on the WAN to a Virgin Media UK cable connection plug - can someone advise a good solution?

  I'm a Home Office / Small Office so user there are several Wired's devices and a mixture of wireless clients. I need at least 8 ethernet outlets. Reliablity and speed performance are important, but not important enough to go overboard on the cost!

  Many thanks to you all.

  I recommend a router Linksys (SMB) LRT214\224 and a switch POE LGS Linksys (SMB). This combination will be very fast and stable.

• Why some youtube videos appears a white screen with sound only, while other just work very well, these videos streaming without any problem

  Why some youtube videos show a white screen with sound only, while other works very well, these streaming videos without any problem on youtube no black screen, nothing, but sometimes once downloaded, they appear black screen with sound only? Yes sometimes when you re-download it works very well, but why?

  Hello

  (1) did you make any changes before the show?

  (2) you use internet explore? If so, which version?

  (3) is the specific question of youtube videos?

  (4) the same thing happens with the different browsers?

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  For reference:

  Why a few blank pages or incorrectly displayed in Internet Explorer?

  http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

  I hope this helps.

• WebService to Check - in with metadata only

  Hello

  I want to check in the new metadata only document in WCC by WebService.

  I tried using "createPrimaryMetaFile" but it doesn't work.

  < chec:property >

  < chec:name > createPrimaryMetaFile < / chec:name >

  true < failure: value > < / failure: value >

  < / chec:property >

  Only metadata option is enabled in the configuration and when the user perform check-in to check in the page with metadata only checked it works perfectly.

  How can I do the same thing in a WebService call?

  Thank you.

  I think that the fundamental error here is that the parameter is added to the application filed in Soap UI manually or according to the IDE you use.

  You must do the following steps:

  1. open the Console of the AAU and navigate to Administration - Soap WSDL - CheckIn - Edit - CheckinUniversal - Edit - from the top of the menu page drop down select request update settings

  2. now, under the application the following must be true:

  Name: createPrimaryMetaFile

  Type: area: boolean

  Leave the rest of the fields as-is.

  3 update

  4. Select WSDL in the upper left corner

  5. under Actions - select Generate WSDL and confirm that it shows "the WSDL files have been generated successfully."

  6. now download the CheckinWSDL from the Complutense University of Madrid

  7 import in the IDE and recreate the request

  8. here you will see the createPrimaryMetaFile option (by default it is like this:)

  ?

  9. change the '? ' to 1 and run the query.

  Confirm if it works well or not.

  I gave these steps in the event that it has not been done, if done then just re - confirm the steps.

  I even tested on my internal test environment, it worked fine.

  I hope this helps.

  Thank you

  Srinath

• Can I buy subscription only Photoshop app and then reload with subscription only application illustrator? It is less expensive than the full package. Is it possible?

  Can I buy subscription only Photoshop app and then reload with subscription only application illustrator? It is less expensive than the full package. Is it possible?

  It is better to buy the subscription of photography cloud creative and unique Illustrator App subscription

  $9.99 + $19.99

  Yes, you can buy according to your choice.

  https://creative.Adobe.com/plans

  Photoshop + bright room and Illustrator

  .

• A week ago, I bought a subscription to CC in Adobe Photoshop and Lightroom. I can access Photoshop but this screen still ask me for the license number or if I want to continue with the trial. The same thing happens with Lightroom, only he mak

  A week ago, I bought a subscription to CC in Adobe Photoshop and Lightroom. I can access Photoshop but this screen still ask me for the license number or if I want to continue with the trial. The same thing happens with Lightroom, only it makes me sign and taking me in the tutorials. I can't access the actual program. Help!

  Ask the serial number http://forums.adobe.com/thread/1234635 has a link to FAQ

• create the user with READ only grant

  Hello
  10 g R2 on AIX.
  How to create users with READ only grant on all tables (or all tables in a schema with 70000 tables)?
  
  Thank you.

  Please refer to: http://www.ulfet.info/index.php?view=oracle.docs_grant.with.loop

• Using repeat with... in... Loops with lists of properties

  I am using a loop "repeat the operation with the variable in the list" with a list of properties where properties are symbols, but it doesn't seem to work; It falls right through the loop. Exactly the same code works when passed a list of properties where properties are integers.
  
  Of after the description of function AW7 repeat with in:
  

  Quote:
  Repeat with X in the list repeats the instructions in the loop with each of the elements in a list. Each time through the loop, the function sets the next item in the list or the following in a property value to the specified variable. As Authorware estimated the list with each pass through the loop, the instructions that modify the list inside the body of the repetition can affect the loop. Authorware maintains a reference to the list of origin for the duration of the loop. This means that the list persists at least for the duration of the loop.
  Syntax:
  Repeat the operation with the variable in the list
  (s)
  end repeat

• I get my internet through a Repeater.  There is a POE carrier then online, then a router adapter yet.   Can I use an Airport Extreme with POE to improve my WiFi range?

  I live in Baja California Surinamese no cable.  You want to improve WiFi.  Not sure how to interact with a POE.  Tried to set up the airport without a bit of luck.  Appreciate some feedback.

  If the connection between the POE (Power over Ethernet) device and the AirPort Extreme is a wireless, then you will not be able to extend the network Wi - Fi of the OCB in the extreme. This is possible with an another AirPort base station.

  In addition, only a particular model of the base station AirPort Extreme POE supported wired connections. It was discontinued in 2007 and is model # A1034.