Satellite Pro L870 - Touch-pad suddenly stopped working

Similar Questions

• Satellite M40X-189 - Touch Pad has stopped working

  The touchpad has frozen. I rebooted the computer and the touchpad worked. This happened several times, and then by restarting does not clear the problem. I checked in the device several times Manager and sometimes the mouse was listed and sometimes it wasn't! I restored the computer to an earlier time when the touchpad was working but it does not solve it. An Agent from Toshiba offers the soft ware was corrupted and I need to save every thing and use the recovery disk to reload the software for the tablet. I'm not ready to do it again. Currently an ALPS pointing device and a compatible mouse HID are listed in Device Manager, and both are erroneously reported as working. Any other ideas on how to fix the touch pad?

  Hello

  In my opinion, you should try to use an external mouse to see if it works again and again. Believe me on this path it is not easy to say why this happens.

  There may be a hardware problem, but it must be tested. If you preinstall the unit with recovery CD unit will be clean and on this path, it is not possible to say that some additional software has any influence on that.

• Satellite Z830-10U - Touch Pad has stopped working

  I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

  Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

  All help gratefully received...

  Hello

  What happens if you disconnect the USB mouse?
  You can use the touchpad again?

  From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

  For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

  You can find it here:
  Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
  It is worth to check also

• Satellite L510-S432 - Touch Pad has stopped working

  Hi all.

  I bought this laptop last 2 weeks, it works well at first.

  It was once I rebooted the system to reduce some startup programs through msconfig, the touchpad doesn't work. Before the restart, there is a tool bar showing on top there whenever door - press the 'Fn' and now he gone too.
  However, the function "Fn" still work, where I still can control the brightness, the numeric keypad, and etc. through the fair. Fn Fn + F9 key that usually turn on/off the touchpad does not work.

  I had reinstalled the synaptic driver, but still, it did not work. I had activated back all system startup that I had to close, it still does not.
  I try to restore the system, but failed.

  Need help, thanks first to all who help.

  Hello!

  To me it sounds like that, the touchpad is simply disabled with FN + F9 and you will need to activate it.

  I assume that you are using Windows Vista, then you need to reinstall the Toshiba value added Package. You can find it on the Toshiba site. This package is required for the FN keys and other special functions.
  But before installing the new version, you need to remove the old version first.

  An interesting thing: you wrote this system restore failed. What exactly do you have and do you have an error message?

  Good bye

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Satellite NB10T-to-10F - webcam suddenly stopped working

  Hello
  I got the laptop TOSHIBA SATELLITE NB10T-A-10F
  The web cam has suddenly stopped working
  I tried
  Updated bios even without result
  Here is the picture of Device Manager

  In various cases, the webcam can be enabled and disabled in the BIOS
  This option would typically appear in the BIOS under: Advanced-> System Configuration
  Please check this box.

  Otherwise, you need to know also that the webcam driver installation isn't necessary if you use the system Win 8 or 8.1 win because such driver is already part of the system.

  If the BIOS does not have the power option webcam (Advanced-> System Configuration) I would recommend you to retrieve the computer laptop back to the factory to check settings if possible hardware malfunction would be responsible for this issue.

• Satellite L300 - Built In webcam suddenly stopped working

  Hello

  I have a Toshiba Satellite L300 with a built-in USB 2.0 camera and a windows operating system 7, the camera suddenly stopped working for about 2-3 weeks ago with unknown reason!

  I tried the system restore, uninstall and reinstall the camera driver, preformed a complete analysis by kaspersky internet antivirus 2012 (updated) and I also ran a complete system and drivers troubleshooting... and the problem persists...

  When I use windows live movie maker it gives me an error saying: can t record audio or video of the selected camera. Make sure that the device you are trying to use is properly installed and not currently in use by another program.

  The microphone works well on Skype, but the camera does not open!
  Please tell me how to solve this problem, what missing am me?

  > I tried the system restore

  You got the device using the Toshiba Recovery disk?
  In this case the cam should work

  Otherwise I would say that this unwanted material s.

  Some users here in the forum have reported a webcam problem and the reason for this was a loser between the cam module and the motherboard connection.
  The webcam is connected to a USB controller on the motherboard.
  If the connection does not exist, the webcam does not appear in the Device Manager it does not appear in your case? Check this box

• Satellite Pro U400 - 150 - display has stopped working

  Hello guys,.

  yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all. Everything is OK, PC works fine, everything is good, but only the display is black.

  I Don t know what happened with my laptop. :/

  Is there anyone who knows the answer to this problem?

  Thanks for all your answers.

  > Everything is OK, PC works fine, everything is good, but only the display is black.
  Of course, this isn't all right if nothing appears on the screen

  Connect an external monitor to check if you would be able to see something on the screen?
  Do this! Usually you should use the FN + F5 to alternate between the monitor internal and external.
  If this is not possible and nothing could be seen on the 2nd monitor, the graphics card problem can cause this.

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Satellite C50 - A touch pad no longer works

  I bought a new laptop of C50 - A satellite but the touchpad has stopped working.
  I tried updating driver but says I have the latest version of the driver.

  He worked for a few seconds after switching on, then freezes.
  My usb mouse works.

  Don't know what to do.

  Hello

  The user Tom is right: the touchpad can be enabled and disabled by using the FN + F5 key combination (or F5 only in case of special function mode is activated)
  In case this does not help, try to install the driver for the touchpad Synaptic and the Alps from the page of the Toshiba UE driver.

• Satellite Pro L450D-14V - scroll function stopped working

  Hello, sorry for the bad post (novice!)

  I have windows 7 32 bit preinstalled with preinstalled rescue disk program (made on the two discs). Model is Toshiba Satellite Pro L450D-14V (2 GB of additional RAM installed, was only 1 GB). It has been provided directly at BT, after winning a competition.

  When scrolling to work stoppage, it was presented in the control panel/mouse that I could click on and get parameters which is the case of the Green/horiz. Bearer of buttons are even though they in grayed out when I tried to click them.

  Since the mucking with drivers I have now that I lost the functionality of touchpad synaptics, it only has a PS/2 compatible mouse, but all I have is the touchpad, workingl still without scrolling?

  Thank you for your interest

  Sigull (Tony)

  Hi Tony,.

  Welcome here in the forum! No problem regarding your assignment, it of not difficult and we can discuss here everything about Toshiba laptops! :)

  The scrolling feature is controlled by a touchpad driver you've already written and if you have lost this function I recommend reinstalling the driver from the official site of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  On this page are two drivers listed: Alps Electric and Synaptics. You must install two drivers!
  After that, you should be able to use the new virtual scrolling :)

• Re: Satellite A300-19 t has suddenly stopped working (power led is off)

  Hello

  I have a 19 t A300 Toshiba, model PSAJ4E that I have used for more than 1 year and a half. Yesterday, I just started, started to work for 5 min and all of a sudden it has stopped working and remained silent. I'm not through the shutdown process or whatever it is a software based process, just a hard stop. I don't even have the led power indicator. I figured that the power being the issue, brick took and plugged into another laptop and was good (the power led came). This is definitley on my laptop.

  So I am writing to ask you guys: what can cause the power light on my laptop, not to turn on, when I plug the DC Jack? Is this something on my laptop the charging circuit? What is the motherboard I need to change? How can I get a better diagnosis? I got this entire manual to solve my problem? My goal is to find out exactly what happened.

  In addition, I have the skills to apply basic manual procedures. I am able to disassemble my laptop (down to the motherboard) and refit it.

  Thank you!

  Ilyes Gouta.

  Hello

  It looks like the power supply electronic breakdown which is part of the motherboard. I don't think you can fix it yourself, in most cases, replace the whole motherboard.

• Satellite Pro L20: Adapter WLan has stopped working and will not allow

  Hello

  I have a L20 Pro Satalite, which works very well. However, just before Christmas 2006, the adapter wireless (Atheros AR5005G) has stopped working.

  Windows XP Pro SP2 can see the adapter and network connections shows as being activated, but he sees not all networks.

  The Atheros Client Utility says that the adapter pases troubleshooting TI test diagnosis up to the Radio, when he says that the Radio is disabled and must be enabled in the Client utility.

  'Excellent!', I thought: opening the utility forward. Looked in the Action menu to find "turn on the Radio" is greyed out!

  Help!

  Any help is very welcome.

  See you soon,.

  Barry Smith.

  Is there a hardware option to enable and disable your wireless network card? (switch)
  You upgrade your Wlan driver recently? (If Yes, maybe with the wrong driver?)

  I had a similar problem once and resolved through driver updates... want to give it a try?

  You can download the driver generic Atheros (Version 5.0.0.107) available here:

  http://www.DD-WRT.com/DD-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip

  Concerning

  chain

• Satellite Pro M70 - Windows XP has stopped working - registry problems

  My M70 lost (I will follow soon!). Windows XP has stopped working, registry problems. I finished by using the Toshiba Recovery disk and reformat the hard disk. Said again there is some registry problems and crashing.

  One had similar problems?

  Phil

  Hi Phil,

  If your laptop is always report registry errors after having re-installed the operating system from the recovery disc, then it is likely that your hard drive has errors. The Windows XP registry is composed of several files (or urticaria), and the installation process will always be located in the same area of the hard drive.

  Kind regards

• Satellite Pro L300 the FN command stopped working

  I use Satellite L300 and I've recently updated my windows (vista) using the update of windows as usual, then after I restarted the computer I found that the * FN button no longer works so I tried the drivers download site, but I couldn't find something useful

  Post edited by: pathfindr

  Hello

  The FN keys are controlled by VAP (value added package).
  You can download it from the page of the Toshiba driver.

  Notes; the old VAP should be removed first. Clean the registry with CCLeaner, and then after reboot new install the PPV again.

  See you soon