Wrt54g and Wrt54gl configure WDS, but can't connect to the router

I tried searching the web and this site but can't find the soluction. Please notify

Here is the configuration, I installed wrt54gl with dd - wrt standard version running hotspotsystem.  3 wrt54g version 5 with dd - wrt micro configured as client WDS wrt54gl.  After the initial setup I can connect the main router wrt54gl (192.168.1.1) and all 3 routers WDS (192.168.1.2, 3 and 4), but after a few days of tests suddenly I can not connect to 2 WDS routers.

I want to say I can connect and he will make me to internet but I can not login to stay, he says just the page takes too long to load.  I know that if I do a hard reset and the WDS installation program then it will work, but I don't want to keep doing.  Someone has an idea?  Tried power but cycle anyway, the router does not work.  What is the load on the router made inaccessible?  Any suggestion would be great!

Ask a dd - wrt forum.

Tags: Linksys Routers

Similar Questions

  • I recently changed internet service providers and now my Wired desktop can't connect to the internet.

    I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

    Hello

    Follow the steps in the KB article below and see if that fixes the problem.

    How to troubleshoot possible causes of Internet connection problems in Windows XP
    http://support.Microsoft.com/kb/314095

  • Hi, I just paid for this 11euros per month thing, for Lr and Psalm I had the trial version installed before and now I paid, I can not connect to the bloody thing, it asks me to enter a serial number, which I do not have... everyone has

    Hi, I just paid for this 11euros per month thing, for Lr and Psalm I had the trial version installed before and now I paid, I can not connect to the bloody thing, it asks me to enter a serial number, which I did not... someone has a solution for me please...?

    Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  • iPad can't connect to the router

    Hello

    I have a WRT320N router with firmware version 1.0.01 build 008.  I just got an iPad and so that it can find my router, I can't access the WiFi when I enter my password.  I can use the router with my laptop so I know the login and the password are correct.

    I saw two directors here suggest the same thing.  And one person said it worked.  The same directions were:

    Try changing some wireless settings on the router.

    Connect the computer to the router with the Ethernet cable. Open the router configuration page.

    Click on the wireless tab and put in manual configuration. Change the channel to 11 wireless. Save the settings.

    Go to the wireless tab and click the settings advanced wireless.

    Change the tag to 75 interval, RTS threshold to 2307 and 2306 fragmentation threshold. Save the settings.

    Try to connect to the wireless network again and see if it works.

    My problems are:

    1. I think that my computer is already connected to the router with the Ethernet cable - I want to say that it is an Ethernet cable attached to my computer and my router - in slot 1 on the router

    2 - the only thing I know how to access is the Linksys EasyLink Advisor.  What and where is the router configuration page?

    Thanks - I wouldn't think that if I can't get my router to work, I just lost money on an iPad only WiFi and will instead get one of these devices to attach to the iPad that allows you to connect to wireless internet - like device "clear."

    Read the user guide. The web interface is at http://192.168.1.1/ unless you changed the address LAN IP of the WRT.

  • My new site is done, now I do a phone and tablet version. How can I connect all the 3 sites with having duplicate content.

    Hi again.

    When I close my phone and tablet version on my site, I intend to have two large buttons at the top of the Web site that say "CLICK HERE for VERSION PHONE" AND "PRESS HERE for TABLET VERSION.

    How you launch the phone and tablet with making it duplicate content?

    ... Make articles to submit my site with 3 different versions?

    For example,.

    (1) see HumboldtPitBulls.Com for some of the best traditional dogs (goes to 'normal PC version' of the website)

    (2) If you are interested in seeing see some beautiful APBTs website (goes to 'version of phone' web site)

    (3) If you want to learn more about the history of the old Rednose Pitbull family discover our items (goes to version 'Tablet' on the website)

    Please tell me I didn't need on the 'market' all 3 versions separate. Looks like more work that simply "come see HumboldtPitBulls.Com".

    Thanks again!

    Hello

    You can create all three layouts of your site in a single file of Muse and publish/export/upload as required. Muse generates the code to detect the device used by the user and automatically redirects to relevant content... You only need to promote the "yourbusinessname.com" and Muse handles redirection to "yourbusinessname.com/phone/" or "yourbusinessname.com/tablet/" depending on what device you use to access the site.

    Please see a few resources around Muse: Designing for Devices.

    http://TV.Adobe.com/watch/Muse-feature-tour/Adobe-Muse-designing-for-mobile-devices/

    http://www.adobepress.com/articles/article.asp?p=2219864

    http://helpx.Adobe.com/Muse/using/creating-website-mobile-devices.html

    See you soon,.

    Vikas

  • Error in the configuration wizard. Unable to connect to the router.

    All connections are correct.  I am able to connect to IE and FireFox with ethernet and connected my corner via "Linksys".  I opened with ISP address and configure security.  Is there more in the configuration I have to do?

    What is the model number of your router? If the internet connection is working well, then you need not to worry the installation disc. As long as you know how to set up the router manually and able to access the interface of the router then there is nothing to worry about. It is with the disk configuration wizard is exceeded or there could be some firewall software on the computer that is blocking the setup of your router to detect Wizard. It is the most common problem I encountered, but well it's always the manual configuration. If you do not need to install and use the software just go to the linksys download site, or you can also consider using another computer.

  • Wii can not connect to the router

    Please HELP, can't connect to router wants have changed the password password several times guard commin back with security codes cannot connect to internet... Please someone help

    What is the wireless settings you have set up on your router (SSID, channel, Security Mode)? Try changing the security on your router to WEP or WPA Personal Mode and then check.

  • Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

    I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

    Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

    I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

    In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

    This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

    Someone, please help!

    I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

    Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

    Hello

    When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

    First step, log on to the HP support and download the latest drivers for your wireless card.

    The HPG60 is a very good phone but its wireless card has problems with old drivers.

    In which case it's a hardware problem, contact HP support.

    In general, you can use this process to find out what's wrong with the wireless.

    Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

    When the work turns on the Wireless security.

    Note * people sometimes make mistakes in writing and retype the password for security.

    Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Can not connect to the WiFi on MacMini 2014

    When I try to connect to any WiFi on my MacMini it says ' Unable to join, try to get closer the router. but the router is right next to my Macmini.

    In addition, my wifi connection is correct. It is easily connected to my iPad and iPhone.

    I tried transferring a file using release from my iPad to MacMini. It worked.

    When I tried to connect to the MacMini with ethernet cable, it worked too!

    The only problem is that I can't connect to the router using the wifi on my MacMini.

    What should I do?

    Try to create a new network location:

    Using network locations (Mac OS X 10.6 and later)-Apple Support

    Try to connect as a different user.

    Have you removed the Mini?

    AirDrop uses bluetooth

    http://iPad.about.com/od/iPad_Guide/SS/what-is-AirDrop-how-does-it-work.htm

  • I know my id and changed my password and everything. But I can't connect to the iTunes Store!

    I know my Apple ID and have changed my password. But I can't connect to the ITunes Store. Cannot understand it.

    iTunes - official Apple Support

  • recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

    recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

    Hi mikedav,

    Thank you for using the Microsoft Windows Vista Forums.

    Method 1:

    Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

    Method 1:

    Follow the instructions in the link below which will help you solve the problem.

    Tips for solving problems with Internet Explorer

    http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

    Method 2:

    Follow the instructions in the link below to optimize Internet Explorer.

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

  • I just joined and have acrobat/cloud but can't figure how to change text on my document?  Can someone help me?

    I just joined and have acrobat/cloud but can't figure how to change text on my document?   Can someone help me?

    Hi annc36037142 ,

    I would like to point out that after installation of Acrobat Pro DC, open the document & tools 'Edit PDF' option, you can edit PDF files.

    Please refer to this article:- https://helpx.adobe.com/acrobat/using/edit-text-pdfs.html

    I would like to know if it works.

    Kind regards

    Christian

  • Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

    Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

    Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.

  • Where exactly the username is. I know that my ID and PW, but I can't connect to the installer of creative cloud

    Where exactly the username is. I know that my ID and PW, but I can't connect to the installer of creative cloud

    Use the e-mail address associated with your account.

  • "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

    So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

    So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

    As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

    Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

Maybe you are looking for