WRT54G Vaio with Vista

I have a hard office wired HP to my WRT54G and 2 laptop computers HP running wireless without any problem.  A XP and a Vista.  I just got a Sony Vaio and every time it connects wireless, the power indicator flashes and Cisco yellow light and the WIFI network on the router continues to go and turn off all the seconds.  If I turn wireless off on Vaio or CAT5 connection, router is ok.

Any ideas?

Maybe you use the router for a long time and that you have not improved the router... So try to update firmware of the router, as it only disconnects when you try to access wireless...

Download the firmware from here

Follow these steps to upgrade the firmware of the device: -.
Open an Internet Explorer browser page. In the address bar type - 192.168.1.1
Let the empty user name & password use admin lowercase...
Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

Press and hold the button of reset for 30 seconds...
Then, unplug the power cable while holding the reset for another 30 seconds button...
Reconnect the power cable and hold down the button to reset for 30 seconds...
Release the reset button... Now re - configure your router... It should be good...

Tags: Linksys Routers

Similar Questions

  • My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

    My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

    Hi Tinkerbellfancolorado,

    1. When is this last work fine?
    2. Do you receive an error message or error codes?
    3. Recent changes on the computer?

    There could be several causes for this problem.

    Try starting with these methods.

    Method 1

    Step 1

    1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
    2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
    3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

    Step 2

    Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

    1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
    2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. On the Networking tab, click Configure.
    4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Method 2

    Temporarily disable the firewall, and check the status.

    NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Hope that was heloful.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • VAIO w / Vista connect wireless but I can't access the internet on my router

    Help.  I have a SONY VAIO with Vista.  Just totally reformatted.  I can access my router (NETGEAR WNR 2000v2) locally, but cannot access the internet.  Curiously, I can connect to unsecured networks and access to the internet.  How can I solve the problem with my router/computer? I removed the 3rd party (Norton) security and made a few other commands nothing done. (BTW - I have 3 other devices that work fine on my wireless router.)

    Hi barry909,

    ·         You get the error message?

    Follow the steps in the article.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Reference: http://windows.microsoft.com/en-US/windows-vista/Wireless-networking-frequently-asked-questions

  • Region with Vista Home DVD code problem

    I have a sony vaio cr290 bought in the United States. I would like to change the dvd region code HT now moved it to the India. its asks me to insert the media to change the region code, I hv tried 4 left. Help, please. I have no Vista support since the laptop is with Vista Home installed. The DVD recorder using pioneer dvd - rw dvr - k17 ata device.

    Hello

    Check with the system manufacturer and the manufacturer of the drive because there may be limits in place
    to avoid changes.

    Have you checked control panel - Device Manager - CD/DVD - double click on the drive.
    DVD region? Be sure to be logged on as ADMINISTRATOR

    Have you tried to connect as ADMINISTRATOR mode without failure?

    You have any CD/DVD programs running at startup that might be locking the
    by car?

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Autoruns - free - see what programs are configured so that it starts automatically when
    your system boots and you connect. Autoruns also shows you the complete list of the registry
    and where applications can configure Auto-start for the files settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    --------------------------------

    DVD region information
    http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

    DVD region code
    http://en.Wikipedia.org/wiki/DVD_region_code

    You can buy devices that claim to be region free and software that claims to be able to
    other regions to read even if I have no experience with those.

    Region Free DVD Player Information
    http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

    Region Free & Code free DVD player information
    http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

    Forums - a lot of expert real help
    http://Club.myce.com/

    I hope this helps.

  • 24 of Firefox with vista to date fails to display icons on the new Yahoo Mail and other web sites — especially icons such as facebook, twitter WHY?

    Web sites like murraystivoli.com that display the facebook and twitter icons and in particular the new Yahoo Mail interface fail to display the icons. I see only a small rectangle. On Yahoo Mail, there are a few inside but instead it should be the display arrows, images of envelopes or as medium icons or 'send '. The new interface is useless without correct icon translation - can not see the arrows for 'reply' 'reply to all '. It works on Internet Explore on Vista; It works on Firefox on Windows XP (it's the way back level) then why do we see this problem with Vista and Firefox update (we 24.0 but saw problems on websites that I don't care that much about other levels of Firefox also.)

    Help, please!

    Same problem here... I have no icons or tick boxes at all in Yahoo mail and it affects a good few other sites too, just small square boxes with numbers inside. It's really annoying!

    Here's what it looks like (you may need to zoom in a bit)...

    http://img.Photobucket.com/albums/v146/Orbiter/11-10-201311-48-39AM_zps381dbba9.PNG

  • Sony VAIO with Windows 7: Firefox crashes within minutes of departure. Did not initially. Can you help me?

    Portable changed job several months ago.
    Currently using Sony VAIO with Windows 7 OS.
    Changed during any of the information; several tabs open as 'home '.
    No problem for months with firefox running.
    About 4 to 6 weeks after the opening, the program freezes and will not respond. I have to force him to leave. Abandoned and changed in Google Chrome.
    Internal number THERE dude can't understand.
    I have no problem with my personal MAC (even put in place and home of the tabs).

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • Keep HP with Vista 64 bit programs to clean install Win7

    My HP pavilion m9400t was bought a year ago and failed to qualify not free upgrade.  In any case, I think I will try to Win 7.  I'm gathering that I need to do a clean install.  How to save all the extra HP provided software installed with Vista (Hardware diagnosis Tools, HP Advisor, HP Support info, Lightscribe, Cyberlink DVD suite, etc.).  I use these programs regularly and want to be able to install on Windows 7.  How to save each of them?

    If this is the case, and I lose all the extra software HP... is there a way to record programs on a DVD and the re - install after a clean installed Win7?

    Where can I find these files?

    OR conversly, if I make a superposition of Win7 on vista installation, be fine or will it be buggy?

  • Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

    Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

    Try to download from this site:

  • Problem with Vista hit the Satellite X 200 - 20 s

    Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

    Hello

    I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

    I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

    That's all

    Good bye

  • How to partition Satellite A300 - 21 H with Vista?

    Hello
    I have a Toshiba Satellite A300 - 21 H with Vista and dual you want to boot with ubuntu linux. At present, there are three partitions, recovery vista 1.5 GB, 150 GB C and 150 GB E (with recovery of HARD drive inside). My ubuntu, I would like to partitions / and / Home (about 150 GB). Should I delete the partition E? I have my recovery DVD's...

    What is the best approach, I think that linux is only 4 partitions.

    > Should I delete the partition E?
    If you created the recovery DVDs, you can remove HDDRecovery and use the second partition for Linux. When you want to install once again just use recovery media created Vista.

    If you change the structure of the partition, no doubt, you will not be able to use saved image in this folder.

  • Satellite P with Vista series load very slow on start up

    My computer takes 4-5 minutes to load completely when I swiftch on, the office immediately loads but then seems to doing nothing for a few minutes then taskbar and sidebar start charging.

    Is this normal on Vista?

    Tried to stop unnecessary programs from startup in the taskbar but makes no difference.

    Anyone have any suggestions or help.

    Thank you

    Hello

    I assume you are using the Vista operating system. Am I wrong?
    Well, the Vista operating system needs a lot of material resources like OS first, that is to say XP.

    This is why all computers work slower with Vista for another OS that is XP but I think it is nothing exceptional, due to the fact that the Vista eat resources of the computer due to new features such as Aero, new photo and video files, Direct10X, etc..

    What you could do is update the memory which allows for slightly better performance, but you shouldn't t expect a big difference.

    Greetings

  • Satellite M50: How to make the media buttons on the right works with Vista

    Hello
    I successfully upgraded to Vista a all parts have been recognized in the right way.
    Now I am looking for a method to make the multimedia control buttons works with vista.

    You know a laptop that has the buttons too and for whom is the Vista drivers available?

    Kind regards
    Steffen Schreyer

    Hello

    Generally these additional buttons needs a Toshiba control utility which is responsible for the good condition of these key market.
    Unfortunately, it does appear that an update of the BIOS and the driver of BT has been published for the Satellite M50 PSM53.

    But in other sections, you might find a value-added package for Vista.
    This package includes a few additional applications.

    Maybe this works on an M50. Check the download page of several series of laptops on the pilot.
    If this will not work, then you can do nothing ;(

    Good luck

  • Tecra A9 came with Vista and XP, the disks - but can not activate XP

    Hello

    I have a Tecra A9, it came with Vista Business pre-installed and on a recovery disk. It also came with a XP Recovery disk.

    Part of the documentation in the box suggests that I should be able to simply install XP from the recovery disc. I tried this, but I can't activate XP. I called the number of Microsoft on the activation screens and entered all the numbers, but I then told me that there is an error and I should change my product key.

    My laptop on a a Vista product key stuck on the bottom. So, I seems to be a little stuck.

    The sheet that was in the box says:

    "it's additionall equipped with a Windows XP Professional Recovery DVD - ROM that allows you to easily install this operating system on your own. To do this, follow the instructions on the packaging of the DVD of restoration"

    Usefully, there is no instructions on the packaging of recovery DVDs, I expected maybe a XP product key or something... But clearly not.

    How should I proceed?

    Thank you

    Hello

    Sorry, but I'm a little confused. As much as I know Toshiba recovery image should not be enabled and if you please be so kind and explains what exactly happens when you try to use recovery media?

    On what stage you must enter the product key?

  • Satellite L30-101 very slow with Vista

    That's old for a few days and the slower machine, I've ever had. Anyone have any idea what I can do to speed it up.

    Is there a free windows xp I can install that I already hate this vista.

    I bought 3 toshiba laptops in the last 2 months and you have to admit that I didn't notice that this was not the same as the other 2 are excellent.

    Thank you

    Hello

    > Is there a free windows Xp I can install
    No, certainly not.

    Have you ever heard or saw that the computer manufacturing would offers a complete operating system DOWNLOAD?
    I n t. I think it would be for the account of Microsoft!
    If you want to use another OS you have to buy it and then you can install it on your laptop

    To my eyes, the unit is slower with Vista because this OS's need and waste of many remedies for laptop.
    In my eyes he of a a big drawback of the new Vista operating system

  • How to create a dual boot with Vista installed on my Satellite U400?

    Hello

    I just bought a U400 - 17 H with vista installed on the HARD drive. I would like to create a dual boot with XP Pro.

    I have only a drive HARD aleady with 2 partitions (1 for vista) + 1 for data.
    I want to cut the partition vista in two 2 pieces to install XP Pro.
    At the end I'll have 3 partitions 1 vista (65 MB), 1 xp (65 MB) and 1 data (125 MB).

    Is it easily to create a new partition ok (I guess only on vista)
    but is there a program dedicated to install another OS and create a dual boot.

    Please help me because I like many things the other way around. I'm sure it's possible, but what are the right process to have at the end of two BONES and the choice at the start of the laptop

    Thank you
    Gerard

    Hello!

    Create a new partition for Windows XP and install it. There is no problem.

    After that, you need to restore the Windows Vista boot loader. You can do this with EasyBCD. Install and start the program.
    Go to the tab "Add/Remove entries". You will see that there is only one option available in the bootloader of Vista at the moment. In the "Add an entry" section, replace the drive in the menu drop-down of C:\ E:\. Change Type "Windows NT / 2 k/XP / 2 k 3" and the name of "Microsoft Windows XP". Then click on 'Add an entry' and 'save '.
    Then go to the "Manage Bootloader" tab make sure "Reinstall the Vista Bootloader" is selected, then click on "write the MBR.

    Now you can restart the laptop and you should have a full system dual boot to work.

    Good bye

Maybe you are looking for

  • Battery problem

    Hey everybody I have iphone 6 s with ios9.3.5 I noticed that the percentage of the battery doesn't drop as normal for example I've used my phone with 45% approximately 6 minutes When the percentage of which 44%, I used the phone about 2 minutes and h

  • I restored the password of Firefox Sync and data are not synchronized.

    I reinstalled Windows and downloaded Firefox, but forgot the password synchronization. Restore successfully, I logged into my account. But the synchronization only has not occurred. Other devices synced are not available. Can I recover the data someh

  • Windows Server 2012 on PE2950

    I have an old PE2950 I put Windows Server 2012.  When I enter my service tag (xxxxxxx) I don't see an option to download drivers for PERC 5 controller / i. Can someone me link to the correct drivers? Thank you!

  • Can't sign a hotmail account.

    I have two hotmail accounts. It works well, but when I try to sign my other hotmail account that a message that appears there is a problem with hotmail and try to come back later. ????????????????????

  • Is there a way to query users for specific api access on app download?

    For example, we need access to net_rim_bbapi_phone in a part of our application.  Currently, the application prompts the user for access... unless the user has enough foresight to check "Set application permissions" before downloading and then comes