WRT54G - wireless just stopped working on all devices

Similar Questions

• WRT54G wireless has stopped working

  I got a Linksys WRT54G for several years, and during this period, he worked a lot.  I use it last night, and all of a sudden, my internet connection come fall.  Initially I thought it was just a problem with my internet, but after a few determined troubleshooting my rooter is the problem.  I checked the following:

  1. the Internet works when the computer is directly connected to the modem.

  2. wireless works, can connect to the rooter configuration screen

  3. I can also connect to the rooter Setup screen when connected wireless

  Each device seems to work on its own, but when I put the rooter and modem together, I can't access the internet with a wired connection or wireless.  I have tried the following to fix:

  1 power bike all devices

  2 reset all cable connections

  3. reset to factory of rooter

  4. firmware re-installed.

  I am out of ideas and have the feeling that my rooter may be toast, but I would appreciate any suggestions.

  Who is your Internet service provider...?

  Have you power rolled all devices including the router and the modem of your network...?

  What is the ip address of the modem... get you?

• Wireless just stopped working...

  Internet Wi - Fi my computer just suddenly stopped working.  It is not yet a signal at all even though my roommate's computer captures very well the signal.  Any ideas?

  Hello

  Could easily be hardware and you don't describe system or device.

  Look on the front or side of the computer and are looking for a switch for WiFi (some have) and if an external
  check the connection.

  Actually try updating your driver and disabling the network logon. Use a connection cable or download
  on another machine and transfer using removable media (CD, DVD, USB and so on).

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed."

  Original title: Audio output device

  My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed." Any idea on how to fix it?

  Hello

  See if that helps you.

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  __________________________________________

  Or go to the website of the manufacturer of your laptop > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Also read this information from Microsoft and follow the steps there.

  'No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either.

  My wireless mouse just stopped working.  I can still use the mousepad however.  I changed the batteries does not.  Then I tried another mouse wireless, and it didn't work either.  What can I do next?

  Buy an inexpensive wired USB mouse for less than $5 and see if it works.  As far as I'm concerned wireless mice are more trouble than they are worth.  YMMV :-)

  Good luck.

• M40X: Wireless has stopped working

  Hello world

  Please can someone help. My wireless connection just stopped working. I have a Toshiba M40x, a router belkin g (F5D7231uk4) and my sevice provider is NTL. I checked with NTL and all is well. I took the cable that connects the modem to the router on the router and connected to my PC laptop and the internet works fine.

  I also reconected it cable and run another ethernet cable from the router to my laptop computer and again internet works fine. When I right click on the little icon wireless and research of wireless computer sometimes shows my router, but nothing happens when I click conect. External wireless switch is turned on.

  Please note that I'm not amazingly well with PCs, so answers in English would be fine.

  Hello

  @fraziola: Sorry, but I m bit confused. The ethernet cable is plugged in and you want to connect to the router via WiFi? Or you have disconnected the cable and then try to connect the router?
  However, in my opinion, you need to reconfigure the router. Check all the settings of the router. In addition, you will need to create a SSID.
  I put t know if you use a WLan configuration tool and more, but if not to check the properties of WLan. In the wireless network tab, you will find an option to use windows to configure my wireless, this option must be enabled.
  Then, you can use the lives option wireless networks.
  If you use encryption, then you must also enter a good code.

  Believe me, the WiFi network is a very complex issue and if you have no experience so ask someone who has more experience of these things.

• X 61: wireless adapter stopped working at home, work at the office...

  It's the strangest thing. Last night my (Intel Pro Wireless 3945ABG) wireless adapter stopped working at home - I can view all the networks and try to connect but it won't just end connections to one of the networks I could use in the past (my own password protected network or those open).

  Curiously, he does not work in my office, connect to our society, protected wireless network password.

  I tried to uninstall the drivers as well as access to the connections and install the latest drivers - but in vain.

  Help, please!

  Moderator Note: type added to the subject line.

  I don't know if it was AC 5.2 or not (because I just realized that the networks in question were not accessible on my iPhone either) - so I reset my router again and now everything is good.

  Thank you!

• My Apple Watch has just stopped working

  My Apple Watch just stopped working about an hour after it has been loaded. All I have is a black screen

  Try the steps in this troubleshooting article: If your Apple Watch does not respond or won't turn on - Apple Support

• Two small buttons on the side of the switch just stop working - Tecra M5

  I had this problem before too many and I was told that the way to resolve the issue was a recovery CD, which means losing all my DATA and blabla... The problem is that the two very small buttons on the side of the switch just stop working.

  Just as that. They are always connected as when the laptop is on in standby or hibernation mode if you click on them it restart the machine. We tried something with Toshiba technician before and also their repair without success Center (change the purpose of the button, reinstall the program etc...) The only remedy was still a lot of recovery CD and a replacement of the machine, thank you for that. The sentence is still started. It could be a problem as cookies, just a wild guess or anything else.

  Now, nobody knows how to solve this problem, or had the same problem?
  Thank you. Olivier

  You talk about the presentation of Toshiba and Toshiba Assist buttons. Am I wrong?
  It seems that there might be corrupted registry keys or the common modules stopped working.
  Why? I put t know but perhaps I got a solution
  Try reinstalling the common modules.
  First remove it from the Add & Remove programs. Then restart the laptop and install the downloaded again common modules.

• Wireless mouse stop working

  my wireless mouse stop working.

  OT: device

  Hello

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?
  3. What is the brand and model of the mouse?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• My wireless mouse stop working

  My wireless mouse stop working... any suggestions? I put a new battery in it and it still does not work?

  Hi Glenna,

  Try a classic USB mouse to confirm that this isn't your system programs related to the mouse.

  Try using different USB ports in order to check that it is not a problem with that specific port.

  Try the mouse wireless on another computer to see if she's working.  That should help tell if the problem is with the mouse or with the computer.

  If it came with the software, firmware and drivers, try to reboot to see if that solves the problem.

  If she just started recently, try a system restore to a point in time before that the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.

  If the mouse doesn't work no matter what you try (on any computer), then chances are it is defective and must be replaced.  If it works on other computers, but not on this computer, then further efforts will be necessary to try to track down the problem.  If the above does not resolve the problem, after return with the results of what you have tried and what version of Windows are you using and the manufacturer, brand and model number accurate and complete of the wireless mouse.  Then this thread will probably be moved to where it should be (this is for feeback on the forums, the issues not techniques on mouse problems) and the people in this forum will also offer assistance.

  I hope this helps.

  Good luck!

• My print spooler app has just stopped working

  My print spooler app has just stopped working. First of all, happened about 2/3 months ago. How can I do otherwise?

  Restart it.  Right-click on computer and choose manage.  Affirm the UAC prompt.  When the console opens, find "Services" in the left pane, then select it.  In the right pane, drag down to "Print spooler" and click it.  Then click on the "Start the Service" button on the button bar.

• Printer HP Laser Jet 1020 just stopped working. Maybe something to do with the spooler starts do not.

  My printer was working fine yesterday for about half of the day, then all suddenly it just stopped working. After hours of trying to understand this point, I think it may have something to do with the spooler printer not stay and "started"... Tips for troubleshooting or ideas would be appreciated!

  Thank you!

  Original title: HP Laser Jet 1020 printer

  Hello Jordan,.

  Try this Fix It from Microsoft: http://support.microsoft.com/mats/printing_problems/ .

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• iHP G70-460us computer laptop and the webcam has just stopped working

  I have a HP G70-460US laptop and the webcam has just stopped working.  How to run again.

  Hello

  Please find the link given below might help you solve your problem.

  Webcam troubleshooting (Windows 7)

• Outlook express has just stopped working error: the connection to the server has failed. Error number: 0x800CCC0E

  Original title: outlook express just stopped working

  The connection to the server has failed. Account: 'sale', server: 'mail.thornroofing.com.au', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10013, error number: 0x800CCC0E

  the message it gives, have disabled norton e-mail analysis?

  the message it gives, have disabled norton e-mail analysis?

  
   
  Try a test message with Norton shuts down completely. If it works, remove Norton and do a custom Setup, opting out e-mail Scanner when it is offered. Sometimes just turn off is not enough.