WRT54G2 - can not configure the wi - fi connection

Similar Questions

• Can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.

  I want to use a USB device to connect to the Internet, as my ethernet card is US I can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.  How to do this please?

  USB to the Internet connection.

  Hello

  It seems that your dongle is not installed properly. try to uninstall and reinstall the software dongle...

• Equium M70: I can not configure the keyboard

  My computer is an equium M70 is the keyboard layout: English Kingdon, because I bought the laptop in England last year... but I moved from my country - brasil and I can't configure the keyboard to use the Brazilian Portuguese accents, I tried so many different layouts page, but no one worked... so, how can I get additional support for sorting? I've already sent an email to toshiba brasil and toshiba England asking for help, it is very important...

  Thank you very much

  Hello

  You can change the keyboard language settings in the Control Panel regional and language settings language Details tab

  In the installed services, you can add the Brazil or / and keyboard Portuguese language.
  Please note: you can set several languages. To switch between the settings please use the keys ALT + SHIFT.

• No sound from the right speaker / can not configure the speakers

  Hi all

  I have a new computer Sony laptop and just tried plugging in my speakers 2.1 computer inside.  Sound only comes out of the left satellite and a subwoofer.  When I try to set them up in the sound control panel, the installation of the single speaker on the speaker Assistant is stereo and only the first test tone (left) plays from the satellite on the left, then silence (no dial tone test on the right).

  Everything works fine on the built-in Laptop speakers, but they are for computer speakers, so I wish I could use my old speakers when I'm at my desk.

  Sony Vaio and Windows Update Update did not recommend all new drivers for the audio controller.  I downloaded and installed the latest driver on the site from Realtek but that didn't work at all so I rolled it back to the version provided with the system.

  Work fine with my laptop speakers older and my cell phone, so the fault is not with the right satellite is.

  Thank you
  Drew

  Hi Drew,

  Thanks for posting your query in the Microsoft Community. There is no sound from the right speaker in accordance with the description of the problem.

  ·         Did you do changes on the laptop before the show?

  I suggest you follow the steps in the article.

  Tips for solving common audio problems

  You can see these articles for more information:

  Sound cards: frequently asked questions

  No sound in Windows

  I hope this helps. Let us know if you need more assistance.

• Can not solve the problems of connection with Wifi (Intel Centrino Advanced - N 6205) card

  The card Wifi on my X 220 (Intel Centrino Advanced - N 6205) gave me so much trouble, I'm about to give up on this and buy another laptop.

  In general, the connection to any hotspot Wifi in any location is quite unreliable. It looks like it is connected for a while.

  And several times a day, sometimes several times per hour, I have to go to the Intel Wifi connection utility and click "Repair" to force the card to renew the IP address. This resets the connection and run for awhile again until I do more.

  In recent weeks, I tried everything I could think of. I uninstalled the drivers, installed the latest drivers from the Lenovo Web site, then tried those on the Intel site. Those who are a little more reliable, but the problem persists.

  If the drivers of card/can't be fixed, is there a chance to get Wifi to work again if I buy another Wifi card and install it? Should which card I try? Can be installed without sending it to Lenovo?

  Any help or ideas is greatly appreciated. Thank you!

  

  

  
  

• I changed the hard drive of a 4440 probook s and I can not configure the fingerprint reader

  Hi, I have a probook 4440 s, I changed the hard drive due to malfunction, I used paintings General; I can't set the finger print recognition

  Hi Rubio7,

  Welcome to the HP forum!

  Your Probook is a commercial unit and the consumer forum.

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do the Forum Commercial/Notebook - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  I hope this helps.

• BlackBerry smartphones can not configure the synchronization

  Our person I.T. installed office on my computer Manager. I plugged the phone and the Desktop Manager. When I click on the synchronization of the configuration. button, she begins and shows: "Determination root Configuration name of hand". It stops and I get "unknown error reported. This happens when hanging the phone to the computer as well.

  Here's what I'm working with:

  Outlook 2003

  Windows XP Professional 2002 Service Pack 2

  BlackBerry Curve

  Desktop Manager Version 4.3.0.17

  I set up my email account and it works fine. Any help would be GREATLY appreciated!

  Thank you!

  These were rights. When I was given administrator rights, I was able to configure the synchronization. I sync a curve. My rights have been reduced to their normal level and timing of the thin curve.

• My WRT54g2 can not see the internet through my wrt54g...

  My company gave me a new laptop which allow no connectivity WEP. I need wep for printers and other devices on my network so I bought a new wrt54g2 to manage wireless WPA and plugged into one of the ports opened on the old router. I went to the admin and everything set up for my taste, but for some reason any that it won't catch a connection... What should I do so that he could see the internet through the old router...

  If you connect a router to another, connect the two together by network ports. Then turn off the DHCP server on the router of the second, which sounds like the WRT54G2 in this case. You may also have to reconfigure the second router local IP address out in the same IP range as the first router but outside the DHCP server on the router from the first milking. For example, if the local IP address of router then the router is on 192.168.1.1, two IP local to 192.168.1. 5 (or something of the sort).

  Or autour routers and use the WRT54G2 as the main and several router that is configured for the secondary router WEP and turn DHCP on the secondary router. Other changes such as the reconfiguration of the local IP address of the second router must always be made. Or check your existing wireless devices configured for WEP see if they will support or can be updated for decision-making support WPA or WPA2. If so remove the existing router and use the WRT54G2 in its place.

  Also, make sure that both routers have different names for SSID wireless and are on different wireless channels to avoid a conflict.

• Call of node on COM DLL can not configure the entry correctly

  I have a COM DLL, I try to use LV2013 32 bit. I managed to go as far as the ActiveX 'Automation open' and an invoke node. This makes me a list of parameters which resembles right (input and output), but I don't know that the real data types are correct.

  I have the DLL, a file header and an IDL file and 2 different bits of documentation (not everything agree).

  I am train to begin just to connect to the server by using the code below (see test Server Copnnect via dll.png)

  It does not work telling me that I have the incorrect input parameters.

  One of the pieces of documentation lists the parameters like:

  char * pConnection required

  long ITimeout optionally

  char * pOption in option

  but the idl file:

  HRESULT ConnectServer([in] CHAR *szPara)

  and the header file:

  virtual / * [helpstring] * / HRESULT STDMETHODCALLTYPE ConnectServer (/ * [in] * / CHAR __RPC_FAR * szPara) = 0;

  I would have thought the idl files and header would be more reliable but then why it the method has 3 parameters?

  Also the data types seem not fair.

  szPara must be a pointer which should be Unlt32 for a 32-bit program (which it is), but the data type reports as an I8 (8-bit integer). the szPara should contain txt connection such as "eth: 10.10.10.10:5000.

  I tried to create a string for the data pointer, but it does not work. I tried the typecasting of the I8 but that kills my data and I find zero to the dll. I tried then as above but the wind upward with points of constraint. I need to convert my multiple byte pointer? (Don't know how to do this).

  I looked at lots of other calls to invoke node in the same DLL and the direction of the setting always seems correct data types do not change (they are not all integer values, some report as real numbers) so it looks like the invoke node works but I do not know how to drive.

  Am I missing something obvious?

  Thank you very much

  David

  A list of the function in the DLL names is also useful to diagnose the problem at hand as would be a list of random characters to understand one language: Niente, Nada!

  It's even worse than having just a header for a standard C DLL file, which can at least tell a little about the parameters, but C syntax is notoriously inadequate to describe the real API in a way disambigous.

  Here, ' char * name "can be a string, a single character, passed by reference, or a byte array. ' void * name "is even more ambiguous, since it could be basically anything! That's why Microsoft created ActiveX with a typelibrary interface that describes the functions much more in detail, and this typelibrary is LabVIEW (and Visual Basic and other languages 'Visual') has access to build the diagram nodes that have access to the methods and properties of an ActiveX object. If this type library is wrong there is nothing you can do in LabVIEW to make it work in any case except write a C++ wrapper that access the object ActiveX and translated them into a correct ActiveX interface. The reason is that end allows access to the typelibrary but as a descending C real also lets you do all the hard programming each detail explicitedly.

  As for your problem with the Denso library that will look much like the library in itself is bad, but that they forgot to certain attribute of the document or registry value that must be set in order to achieve unity of the robot in remote mode. Manufacturers of robotic are notorious for offering little support in access to their material to third-party applications. If they have a library at all so he has often paralyzed and hampered with these small disadvantages and problems.

  But trying to access an interface poorly documented to work around this limitation is very likely going to be an exercise even more frustrating. Simply being able to access their obviously badly designed interface you will probably run in a lot more problems. These interfaces at some point it will take magic numbers like parameter as save addresses to write specific values in and I'd be surprised if this documentation is more detailed on details such as the 'official' library is, what they offer for LabVIEW.

  You may want what all the bad talk about trying to take away the joy of having a fully working for your problem solution, but believe me, I've been there and dealt with the robotic interfaces and the only way that really works in the long term is to find the guy who knows and let them know what save the address must be tickled to make the LabVIEW interface works the way you want.

  An interesting industrial partner with a few good prospects for sales in which case it is possible to work of course helps a lot. Then sellers are sometimes more likely to continue to push the technical staff in the plant to spend a few minutes to find a document of dust collector in the depths of their (digital) archives.

• BlackBerry smartphones can not configure the IMAP e-mail account

  I'm trying to update the password IMAP on a Bold 9700, a process I did several times in a recent past.  However, on this particular device, I can't even on the menu for e-mail accounts.  Every attempt causes the message to ianane OS; "Your device had a problem connecting to the server."  I'm then to try again (an endless loop) or cancel.

  I think it has something to do with my ISP (AT & T) because I had similar symptoms on another device (same model, w/o business security policies).  I was able to fix on the other device by removing the books of IMAP Service and then by doing a hard reset.  It does not work for BB problem.

  Any help is greatly appreciated.

  Thank you!

  PS whatever it is, it's better than a horn in the neck... ask Julio Aparicio.

  Figured it out...

  I used the web interface AT & T to set up the account, and it worked like a charm.  Here is the link:

  https://bis.na.BlackBerry.com/WAP?brand=mycingular

  See you soon.

• Can not see the road when connected via AnyConnect

  We have just added a new subnet to our network. The vlan is to the top and to the top and we have network connectivity to the servers a few we just added to this vlan. When a user connects to the network via anyconnect VPN, the new subnet does not appear in the Windows routing table and therefore is routed out of the default route, and disappears in the clouds of the ISP. All other existing subnets show in the routing table. Any thoughts?

  New subnet - 10.40.10.0/24

  IPv4 routing table
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.26 25
  10.10.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.10.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.11.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.11.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.15.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.15.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.20.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.20.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.30.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.30.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.101.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.101.255.255 255.255.255.255 on binding 192.168.15.1 257
  38.100.196.194 255.255.255.255 192.168.1.254 192.168.1.26 26
  127.0.0.0 255.0.0.0 127.0.0.1 on route 306
  127.0.0.1 255.255.255.255 127.0.0.1 on route 306
  127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  172.17.0.0 255.255.0.0 192.168.15.1 liaison 2
  172.17.255.255 255.255.255.255 on binding 192.168.15.1 257
  192.168.1.0 255.255.255.0 on 192.168.1.26 route 281
  192.168.1.26 255.255.255.255 on 192.168.1.26 route 281
  192.168.1.254 255.255.255.255 on 192.168.1.26 route 26
  192.168.1.255 255.255.255.255 on 192.168.1.26 route 281
  192.168.15.0 255.255.255.0 on binding 192.168.15.1 257
  192.168.15.1 255.255.255.255 on binding 192.168.15.1 257
  192.168.15.255 255.255.255.255 on binding 192.168.15.1 257
  224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
  224.0.0.0 240.0.0.0 on 192.168.1.26 route 281
  224.0.0.0 240.0.0.0 on binding 192.168.15.1 257
  255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  255.255.255.255 255.255.255.255 on 192.168.1.26 route 281
  255.255.255.255 255.255.255.255 on binding 192.168.15.1 257
  ===========================================================================
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  If metric network Destination Gateway
  16 58: / 0 sur-lien
  ===========================================================================

  Hello

  This new subnet that has been added to the configuration, also added to the AnyConnect split tunneling configuration?

  It won't show himself on the AnyConnect client unless the part of the split tunneling list to reach through the tunnel.

  Federico.

• after reboot I have had windows can not find the local profile connect with temporary profile. what I'm doing.

  There was an error of avg and I couldn't close it so I went to reboot the computer and he gave me the message about how window did not find my profile now I don't know what to do

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  tracybarrentine

  First try a System Restore and see if that helps your situation.  If you get to windows to do a system restore when you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps and let us know.
  QQ learn manage!

• BlackBerry smartphones can not configure the phone

  I am new to blackberry and bought a 9700 "BOLD" online. I can't put it up. ATT can help me or the other can someone tell me or direct me to where I can find how to configure it for att internet services?

  TIA

  Mitzi

  My apoligies... I see in the settings folder:

  Sim1 security settings

  phone lock

  Auto keypad lock

  change password

  Certificate Manager

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb

• DeskJet F4580: new router cannot get connection and can not find the whole upward on macbook

  I had to get a new router as I have had problems with my fixed internet internet problems but now my printer does not work unless I connect with the usb cable, I have tried everything including the abolition of the printer, which now, I deleted the setting up of information out of my macbook and can not install the printer please help it worked very well with my other router...

  Hey @gingerjean1,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have replaced your router and are having trouble with your Deskjet F4580 of connection to the network. I can help you with that.

  As you use Macintosh 10.7 I recommend the use of a Windows PC to install the printer on and then to add to your wireless network. If this isn't a practical option there are a number of things we could try.

  Apple Software Update

  1. Click on your Apple icon and go to software updates.
  2. Install the available updates.
  3. Apple's HP printer driversdownload.

  If during the installation there is no wireless options then:

  1. Go to your Apple system and print and Scan preferences icon.
  2. Double-click your printer icon on the left side of this screen.
  3. In the pop-up window, click on settings, utility, and then click Open Printer Utility.
  4. In this new window, you must have a wireless tab along the top, that you can click.
  5. On the left side, we are looking for a wireless configuration wizard.
  6. Run the Wireless Setup Wizard to add the printer to your wireless network.
  7. Once the printer is connected, disconnect the USB cable to the back of the printer.
  8. Return to the Apple, system, print, and Scan preferences.
  9. Click on the button "+" at the bottom left.
  10. In this window, select your printer.
  11. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  12. Click on Add.
  13. Try to print.

  Ad-Hoc

  If the method above does not allow you to connect the printer wireless, then it can work.

  1. Perform a factory reset the printer. I will include guidance on how to do so shortly in a private message.
  2. Turn on the printer.
  3. Press the button on the front of the printer wireless.
  4. Wait for about a minute.
  5. On your Mac or another wireless device, you should see a network with a name similar to "HP Deskjet F4500 XX Print" listed. To connect to this network.
  6. Press and hold the scan button (the icon of the printer under the red x on the printer) for 10 seconds. When you release the printer should print a test wireless report.
  7. On the device you connected to the printer, open a web browser and type the IP address in the bar of address exactly as shown on the test report.
  8. You should have a network tab along the top of this window.
  9. On the left side, we are looking for a wireless configuration wizard.
  10. When you run that must connect the printer to your wireless network.
  11. Once the printer is connected, disconnect the USB cable to the back of the printer.
  12. If you have connected your Mac to the printer above and then reconnect the printer to your wireless network now.
  13. Return to the Apple, system, print, and Scan preferences.
  14. Click on the button "+" at the bottom left.
  15. In this window, select your printer.
  16. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  17. Click on Add.
  18. Try to print.

  If it allows you to connect your printer to your wireless network and then do other forum users know clicking on accept as Solution below my post. Even if you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!