WRT54GL - has been "secured", now listed as "not secure".
Hello
Last night, while browsing the internet, I was disconnected. I clicked on the available network connections, and my router was not. I then pressed the "reset" button, which has held for about 30 seconds and again, the router did not appear. Then I unplugged the router for a few minutes and is plugged in. Now the router was on the list, with a strong signal, BUT it was listed as "unsafe" and did not require the password (encryption key? WPA?) When connecting. In addition, the router was listed as "linksys" and not the name I had given orriginally, "wright_residence." What should I do in order to make this router secure, re - install somehow. If so, could you please provide guidance on how to do it?
Thank you.
Keith
Hi heelz11 and welcome to the forums!
The router returned to the settings by default because you pressed the reset button. Please follow the procedure step by step on how to secure your network and change your SSID (network name).
Configure the settings on a router wireless
Setting up WEP, WPA or WPA2 security on a Linksys wireless router wireless
Tags: Linksys Routers
Similar Questions
-
How can I reset my sharing permissions for default cause I don't know what has changed now I can't install anything, I think it has been somwhere in users
I don't know whichTry to fix it with system restore.
What was this "program"? It came from a reliable source? It would be wise to carefully check for malware also. -
Hi all
I have been playing with vCAC 6.0 for quite awhile (now updated vCAC 6.0.1) and have created a plan that will clone with Windows Server R2 model 2012. Comments agent has not been installed because I wanted only to lift the machine up and running with customization specifications created in vCenter.
The plan was working as expected after I created the service, part of the catalogue and clearances. After that, I converted the virtual computer model to update the model with new Windows patches, and then convert back to model. Now when I try to create a new master plan, selected the workflow of clone and search for the model, the model that I've updated does not exist in the list. Curious, too, I went to change the blueprint and attempted to review for the model, and it does not appear on the list more. In fact, I created a model of linux (CentOS) at some point after the installation of the vCAC, and I don't see the list as well.
No idea on what is happening? Newspapers in the Infrastructure tab-> monitoring-> Log was not showing errors, and I tried to restart all the components of vCAC, including a restart of all services on the server of IaaS.
Probably, you have to manually kick off the collection of inventory data on computing resources where the model.
-
My hard drive has been replaced, now PE does not work!
My laptop was having problems, which ended in my motherboard and hard drive being replaced. Before doing so, I basically copied my entire hard drive to an external drive. I copied everything then back on my laptop with its new hard drive, but now when I try to open PE it tells me to uninstall and reinstall. The problem is that it is not technically installed on the new hard drive! I have no way to uninstall it! What should I do to get it working again?
More information:
It's first Adobe Elements 9.
I use Windows 7.
I have no access to my old hard drive (just what I copied on the external drive to backup/storage).
Given that I copied all of the hard disk, the program and everything with it's on my new, but I can't figure out how to uninstall or reinstall.
(I have the same problem with Photoshop CS3 Extended, if anyone can help me with this too.)
You will need to work around the problem that it won't let you not uninstall first. You may need to go through the instructions to remove manually, here - http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-9.html.
See you soon,.
--
Neale
Insanity is hereditary, get you your childrenIf this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.
-
Original title: Windows XP update killed my PC
April 13, 2011, the latest XP update has been installed. Machine will not start now. How should I do?Thank you
Them
From the F8 Advanced Boot Options menu, were you unable to choose:
Disable the automatic restart in the event of system failure
Your system sounds like it restarts to determine what he complains and then someone can help you to repair.
This is why there is a disable automatic restart on system failure option...
There is another option in the menu F8 Advance Startup Options:
Last good Configuration known (your most recent settings that worked)
I do not think that this will help you, but you can at least say you tried it if someone suggests.
MS products generally work as expected, but may not perform as desired or expected. You can push that dog and make good the bark.
-
Windows xp has been partially updated and may not work perfectly
To install the 3 XP SVC pack... Neede Svc Pak 2 do following error Yes, obtained by attempting to do so.
Windows XP has been partially updated and may not work perfectly
Hello
-You installed correctly updated recently?-You are aware of any changes made on the computer before this problem?Method 1: I suggest to maintain the computer in clean boot mode and check if the problem still persists.Step 1: Clean Boot Mode
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to configure the computer to boot:
http://support.Microsoft.com/kb/929135
Note: After the troubleshooting steps, refer to clean the start link to configure the computer to normal startup mode.Step 2: Manually disable the AntivirusImportant note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3: Install Service Pack 2 (SP2)Steps to take before you install Windows XP Service Pack 3Include to determine which SP1 is installedMethod 2: Follow the steps mentioned below and check if the problem persists.Step 1: Microsoft Windows Update Agent toolHow to get the latest version of the Windows Update Agent?Step 2: Try to install the updates and check if the problem persists.Method 3: Try to download and install the Windows XP SP2 and SP3 manually and check if the problem persists.For Windows XP SP2:Windows XP Service Pack 2 network installation Package for IT professionals and developersFor Windows XP SP3:Windows XP Service Pack 3 network installation Package for IT professionals and developersHope this information helps. -
original title: lack of e-mail
An invitation that has been in an email, attachment, not disappeared. All that's left are the words that weren't in the invitation is left in the email. How can I get it back.You put block images and other external content under Tools | Options | Security in OE? If so, then uncheck this option and reopen mail or hit the answer button and then must show the image. You can also contact the sender and ask that she be sent again.
Steve
-
I have the following environment:
Win XP SP3 (32 bit)
iTunes 12.1.3.6
iPod Nano A1320 16 GB (5th generation)
I get an error when I try to connect my iPod Nano A1320 16 GB (5th generation):
An iPod has been detected, but it could not be identified properly.
Please disconnect and reconnect the iPod and try again.
If the problem persists, uninstall iTunes and then reinstall iTunes.
I tried my other iPod Nano A1320 16 GB (5th generation), and it gives the same error.
I looked at other similar positions with this error message and tried their solutions, but none of them does not seem to work.
However, my iPod Nano A1285 8 GB (4th generation) is recognized by iTunes 12.1.3.6.
Any suggestions? Thanks in advance for your help.
Since it's Windows XP, it's maybe the old problem of the "drive letter". Being a Mac user, I don't know the exact procedure, but try changing the drive letter of the iPod. Maybe that's how
-
I have Windows XP Professional with Service Pack 3. Microsoft does support this system more? I can't to update manually or automatically because auto has been disabled and I can not turn on again.
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058Unexplained computer behavior may be caused by a third-party software
http://support.Microsoft.com/kb/827315You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update
http://support.Microsoft.com/kb/883614
The automatic updates service is missingUpdate Windows in gray - restore (line 179)
http://www.kellys-Korner-XP.com/xp_tweaks.htmAutomatic Updates options are grayed out? :
http://WindowsXP.MVPs.org/aupolicy.htm -
Original title: Publisher
My husbands e-mail has been hacked, now its msn.page is in Arabic and his e-mail now read from right to left
His name is * address email is removed from the privacy *
can you help me
Bob Davis
Thank you
Hello
The question you have posted is related to MSN and would be better helped by MSN support. Please visit the link below which offers the best support.
https://support.MSN.com/default.aspx?mkt=en-us&WA=wsignin1.0&St=1&wfxredirect=1
Hope this information is useful.
-
somehow my trash has been removed and I can not find a way to recover it, can someone help me.
Hi Don,
I believe that the following tutorial will solve your problem: http://www.vistax64.com/tutorials/168608-recycle-bin-restore.html. Note down this (before the items) the many associates tutorials related to the trash if either it doesn't work (but I bet it will be), or you would like more information about this.
Good luck!
Kosh
-
Original title: windows updates 7
Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either. Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.
I am at a loss... Anly help would be welcome.
1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.Press enter
3. open Control Panel > Windows Update and Windows 10 should begin to download...
If this does not work:
Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.
See the instructions: How to download official Windows 10 ISO files
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
-
My flash player has been updated and still does not recognize that its been updated
My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!
Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.
"When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir
-
Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to SOLVE IT MORE.
Error 201 & 205 & 206 & 207 or several U43 errors
-https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html
-
The motherboard on my mac pro book crashed. It has been replaced. I can not access my CS6. I have my serial number. What should I do to get it up and running again?
Hi Tony,.
Try to download the CS6 from the link below:
Download Creative Suite 6 applications
Kind regards
Sheena
Maybe you are looking for
-
Extremely slow AutoComplete for addresses after update to Thunderbird
Yesterday I upgraded to Thunderbird since version 30 to 31, AutoComplete for addresses is now, while I have written messages that are extremely slow to suggest contacts. If I enter only one letter in the destination field, thunderbird hangs for about
-
G50 - 80 - light and camera problem
Control of brightness on my laptop keys does not work and I am not able to switch on my camera. Please, help me in the present. Thank you Mod edit: System model added to the front of the subject line to improve visibility / clarity.
-
Changed the title: I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it." I opened an account and set up parental controls. It is
-
Cannot read my Netflix as I do several times a week. New error message.
Obtaining it: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.
-
I've been uaing ULEAD VideoStudio 11.5 Plus Edition to capture video in Windows XP without any problems via ilink cable 1394 and I just new PC of Dell Studio XPS 435 t Intel i7920 2.67 Ghz 9.0 GB of RAM Windeos 7 Home Premium 64 - bit operating syste