WRT54GL L2TP-domain name server

Similar Questions

• The domain name server ( DNS ) is not accessible

  Dear all,
  Need your big help here.
  Currently, I face below Internet connection problem at home.
  For this reason, I am really worried and I am not able to video chat with my family for the last days 6 :(
  Please help me
  In fact, I use a laptop provided the office with Microsoft Windows XP Professional/5.1.2600/SP3
  I use the same laptop at home too. Just do the below
  1 obtain an IP and DNS server address automatically
  2 disable the proxy in LAN setting
  For the last 3 months, it went well. Really not sure what happen last Thursday. The internet does not work at evnthough I am able to connect to the local network.
  I searched on the net (at the office) and followed all the steps below. But the problem still exists
  1. check all cables the same I replaced the new LAN cable
  2. downloaded and run WinsockFix
  3. reset WINSOCK entries
  4 release/renew IP address
  My details:
  Using the connection ETHERNET WIRWED
  1394 net adapt #2 - status (connected, firewalled)
  Intel(r) 82566MM Gigabit Network Connection - status (connected, firewalled)
  Broadcom 802.11a/b/g WLAN - status (connected, firewall)
  C:\Documents and Settings\scfb > IPCONFIG/ALL
  Windows IP configuration
  Name of the host...: San-kartcs
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: kr.standardchartered.com
  Ethernet wireless network connection card:
  State of the media...: Media disconnected
  ... Description: Broadcom 802.11a/b/g WLAN
  Physical address.... : 00-21-00-44-76-F8
  Ethernet connection to the Local network card:
  The connection-specific DNS suffix. : kr.standardchartered.com
  ... Description: Intel(r) 82566MM Gigabit Network Connection
  Physical address.... : 00-1E-68-90-E3-00
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.200.100
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.200.254
  DHCP server...: 192.168.200.254
  DNS servers...: 168.126.63.1.
  Lease obtained...: Monday, December 12, 2011 21:49:36
  End of the lease...: Monday, December 12, 2011 22:49:36
  C:\Documents and Settings\scfb >
  While scnanning services "in Help and support center" from the start menu through "Use tools to view your computer information and diagnose problems" for the diagnosis of network
  . He FAILED in 'network adapters '.
  The Internet (DNS, Domain Name Server) service provider is not available
  Network cards
  DNSServerSearchOrder = 168.126.63.1 (FAILED)
  Ping 168.126.63.1 with 32 bytes of data:
  The inaccessible destination network.
  The inaccessible destination network.
  The inaccessible destination network.
  The inaccessible destination network.
  Ping statistics for 168.126.63.1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss)
  Time approximate round trip in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, average = 0ms
  Checked all services and seems to be well
  System event COM + (for WZC issues)-getting started
  Computer browser (browser of the computer will start when necessary)
  DHCP client - started automatically
  DNS Client automatically
  Network - started manual connections
  Network Location Awareness - started manual
  Remote procedure (RPC) call - started auto
  Server automatically
  TCP/IP Netbios helper-autostart
  Automatic configuration (XP wireless configuration) wireless
  Autoconfiguration WLAN (Vista wireless configurations) service
  Workstation - auto
  Please suggest me some ideas that will be really useful for me and my family:)

  Hello

  see this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-networking/ICS-XP-Windows7-DNS-server-not-responding/0338b59a-2ffa-4070-BA2E-bd5d847fc8a7

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What happens to my domain name when I delete a Dreamweaver site?

  I used Dreamweaver to create my own Web site for a year or so now which is connected to my domain name www.tamaragilliland.com. For this particular website, I decided to start using Squarespace for build it for several different reasons. In any case, I still want to use the same domain name and the link to my site Squarespace I built, but I don't know how to erase all content now linked through Dreamweaver. It is also easy to remove the site under Manage Sites in Dreamweaver? That will allow the domain name to be cleared and ready for use on Squarespace, or is there more I should do? I didn't do something without being sure, because I can't afford to have no Web site online for a long period of time.

  Thank you!

  Go to the control panel for the registration office where you bought your domain name.

  Make sure that DNS (Domain Name Server) settings match the settings of your server with the new Web site files DNS.

  http://help.Squarespace.com/guides/mapping-a-domain-general-instructions

• Home Server 2003 domain name registration does not work.

  I had to reinstall my Home Server software and when I go to update the registration of domain name and the link to my live account it back with an error.  I even tried with an error always the same different domain name.

  Pleas repost your request in the Homepage Server Forum, thank you!

• NEW T320 Poweredge Server-> Incorrect internal domain name used--> currently locked system administrator

  Received Dell Powered T320 Server with windows server 2012 r2 preinstalled. I created an administrator account. Then, when asked to internal domain name, I used JAMPRODUCTIONS.local and set up from there with an another administrative account. This server was an upgrade of a previous Windows Server 2003 and I just wanted to put up with the domain that is used on this computer (also a .local but not JAMPRODUCTIONS). I tried to change the incorrect field to the correct. From now I am locked out of all connections (it seems). When I try to connect to JAMPRODUCTIONS ADMIN it says incorrect password when I know I type the correct password.

  Nothing had been put on the server of any importance. Only it would be important to ensure that dell had previously installed. I have the disc R2 de Windows server 2012. Is there a way to start over and do it just with the domain internal correct .local.

  Your help is greatly appreciated

  Thank you!

  Blueox15

  Will have on Dell's lifecycle? and can I use the same disc essentials r2 Windows Server 2012 and the key?

  Not at all. The lifecycle controller is not found in the OS, or even readers. It is built into the system itself.

  Blueox15

  The ease with which this issue can be fixed?

  All you need to do is start to the lifecycle controller (F10) and select deploy OS and reinstall the OS. There is no reason the same not to touch the raid configuration or anything. Just need to reinstall the operating system. If it does not see the drives, then we will need load the Raid driver. In this case let me know, as well as let me know the installed raid controller and I can get you the necessary driver.

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• How not to create a partition on an essbase server without using the domain name and the port using the MXL script?

  Hi guys,.

  We know that we can create partitions on the SERVER NAME, SERVER. AREA: PORT only and ESSBASECLUSTERN founded through the Regional service CONSOLE.

  Now my question is how to do the same to CREATE or REPLACE the PARTITION script.   By default, it's get created using SERVER. AREA: PORT only.

  Here is my script that I use to create a partion.

  CREATE or REPLACE REPLICATE one PARTITION "xxxx". "' xxxx ' AREA 'xxxxxxxx' SOURCEAREA to 'xxxx '. "' XXXX ' to 'WZ00339D' AS 'xxxxx' IDENTIFIED BY 'xxxxxxx' AREA"xxxxxx ";

  
  

  Where WZ00339D is my name of essbase server.

  
  

  Put it in the script is the following.

  WARNING - 1023052 - Partition [WZ00339D:1423 Bullseye Sales] is not valid.

  But the partition is created on essbase app - database with the SERVER. AREA: port only.

  Partition part of orphaned partitions as am I try to open the partition under the name of the SERVER not only through the SERVER. Average Doman:port.

  Partition be created under title

  [WZ00339D.DOMAIN.com:1423.App.DB]-> [WZ00339D.DOMAIN.com:1423.App.DB]

  FYI, the user id used as logins are created by using domain - they are not native users.

  Please let me know how I have to have the syntax so that I can create a partition just as I help Regional service on the name of the SERVER console only.

  Let me know I can provide more information, the entire reason to use a script to create a partition is to refresh the score by a fall and create a partition.

  Roman

  I solved this problem.

  Its very simple all my code and approach was right.

  Everything I did wrong is an active directory account to create the partition and check used a native account on EAS. If you log in with the account active directory - the partition is under the name of SERVER only.

• After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  Yes, no extra accommodation payment is required. After editing your site and savings, click download file to the host of VTT... The info should auto fill with the same information that you used to download the site the first time. You can choose to download only files "changed" or "all files". Click OK and the old files will be overwritten.

• The vCenter server's FULL domain name.

  People,

  Using vSphere SDK Web services, is it possible to get the domain name FULL of the vCenter server that I have connected to? For example, foo - test.domain.com is the name of a field FULL of my RESUME, but I can connect to the Victoria Cross with SDK giving the name as foo-test. Once connected, is their any property by which I can get the FQDN of my CV, IE like foo - test.domain.com.

  Help in this regard is highly appreciated.

  Many thanks in advance,

  -Mani.

  (1) this property reflects maybe just how the guestOS has been set up if she had the FULL domain name or not, I'm not 100% sure but I always put my host names a FQDN. You can watch the underlying guestOS to see how it is set up compared to others which show the COMPLETE domain name

  (2) your original question was on vCenter FQDN, this property as mentioned is only for vCEnter and not for ESX (i). If you need to search for this information, you must watch the HostSystem that represents your ESX or ESXi host. You'll want to take a look at the HostDnsConfig property to find the short hostname under the host name and the domain under the domain name and that will provide COMPLETE domain name.

  I think the best way to interrogate this information actually uses your DNS infrastructure, it is what it is. Looks like not all your environments are configured using domain name FULL which in my books, is not a best practice. If this is the case, what data are only as good as the original configuration in order to make virtual infrastructure out of the image and simply use DNS to query for it. It is trivial to extract the IP addresses of your vCenter and the host ESX (i), so you can use it as a base to make your look up.

  I also recommend to take a look at the API reference documentation, it is the best place to find this information and using the search feature is also very useful to fine-tune the properties that interest you - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/index.html

  I hope this makes sense

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP-DCA4

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• I have a site designed iWed which I can't = up to date. I want to design a new Web site with a different place (everweb?) How can I get rid of the current site? I want to use the same domain name.

  I have a designed iWeb site I need to update. I know I can't use iWeb so want to design and publish a new Web site. I want to use my current domain name. How can I get rid of the existing site?

  So, you want to delete this Web site. That's right?
  If so, you can make trought accessing the website 'admin panel' or 'FTP '.

  An administration panel (or "administration panel") is a site that your host/domain provides to you, where you can change everything you want - even is for 'FTP', 'FTP' is a server where you access your Web site and change what you want, and that includes delete the current Web site.

  Questions please ask.

• Once my domain name expires will I still be able to access my old email on thunderbird

  My domain name is about to expire, I am trading is no longer. However, I may I remind the old emails for the invoices, documents, orders, info etc etc. I will be able to access once the domain has expired?

  You must first upload everything to your server
  Export a complete file will contain all of your (local) settings, address book, etc., but also your emails with attachments as long that you do not move them elsewhere. Perfect for if things go wrong.

  If it is an IMAP account please move all your emails into local folders. As we do not know if you downloaded them on your pc or just look a headers.

  If it comes from a pop account, your only worry would be if your messages are still on the server.
  Even in this case I offered them to local folders

  And you don't have to use the addon on full profile, you can export a folder and its subfolder as mboxes, i.e. the TB-format natively. It's files without extension, .msd is the directory and .msf 's index

• Fixed ip address but no domain name

  You can configure a server that is not intended to host a Web site, but only a few features such as sharing files, ftp, calendar, etc., with only a fixed IP address? If Yes, what is the simplest step by step through OS x.app for el Capitan?

  The short answer is: Yes you can! However, do not use the local point in your full domain name as it is reserved for the Hello. I would also advice against the use of the private area of dot, but rather to get and use a registered domain space. The reasoning behind it: you may change your mind later, normally sooner rather than later!

  Now for the nitty gritty: there are several excellent resources available on the net and in the App Store.

  I will quote a couple for you:

  http://krypted.com/guides/El-Capitan-Server/ by Charles Edge , who is also the author of a few very good books

  I highly recommend the three books by Reid Bondonis available on the App Store for El Capitan. They are worth every penny.

  Then there's the series of video tutorials by Todd Olthoff at http://www.toddolthoff.com/technology/ECS10.11.html

  In addition, directly from Apple, you can and should https://help.apple.com/serverapp/mac/5.1/#/apd6015d9573 for a lot of information.

  Finally, last but not least there are a multitude of resources available to Apple - Support - manuals

  HTH

  Leo

• MBSA - NT AUTHORITY\Network Service reported as invalid domain name

  We use a Small Business Server 2008.

  When we ran a report using MBSA 2.2, we received a critical error incomplete analysis on the database of MSSQL$ MICROSOFT ##SSEE with error:

  This represent a field.  Baseline Security Analyzer cannot determine if it belongs to the Admins group of the domain due to the following error: 1212 the format of the specified domain name is invalid.

  The specified domain is NT AUTHORITY\Network Service.

  How can I fix?

  You will find appropriate supportby starting your own, new thread in the SBS forum: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads