WRTU54G-TM, must assign 802. 11A

Similar Questions

• Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

  Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

  If AirPort Express light does not illuminate, this indicates that the internal power supply inside the Express did not, and the device will need to be replaced.

  If you really a 802.11a/b/g in the Express version, it is at least 8 years old and probably much older than that.  Average life of this product was about 3-4 years, then you have had surprisingly good luck with your product.

• RALink RT3592 802.11a/b/g/n: Ralink RT3592 802.11a/b/g/n to 5 GHz WIFI connection problems

  I have a HP Probook s 4530 with a Ralink RT3592 2 x 2 adapter WiFi 802.11a/b/g/n and I try to connect to my wifi of 5G, but my laptop do not. He can see that the 2G version. My research on the web, I understand that it can use 5G, and my router broadcasts 5G because my phone use, so I can't work on what Miss me. Can anyone help?

  Best, Minoli

  

  Hello:

  The only suggestion I can offer is to try the latest driver directly from Mediatek (Ralink).

  PCI / mPCI / CB (RT2860/RT2760/RT2790/RT309X/RT35X2/RT539X/RT3290/MT7630)

  30/06/2015

  Win7 32/64 Win8 32/64 Win8.1 32/64

  Win7:5.0.55.0 Win8:5.0.55.0 Win8.1:5.0.55.0

  I had the same problem with the USB dual band Ralink wireless adapter.

  He showed only the 2.4 GHz band, and I knew it was a dual-band card.

  My first conclusion is that the adapter was defective and only 2.4 GHz radio worked.

  I searched on the internet about the adapter model and found that someone suggested to install the latest driver for Ralink for it that has indeed brought the 5.0 Ghz band to life.

  Don't say this is absolutely going to work for you, but you have nothing to lose by giving it a try.

• Support for EAP-FAST on Ironet 802.11A/B/G adapter

  Cisco Aironet 802.11A/B/G Wireless Cardbus Adapter such as the lack of AIR-CB21AG-E-K9 supports EAP-FAST. This support happens?

  Hello

  EAP-FAST of WPA and 802. 1 x EAP-FAST is already working before the release of ADU v2.1.0.2

• The dv6429ea specification supports the "HP Atheros AR9280 802.11a/b/g/n WLAN mini PCI card"?

  The dv6429ea specification supports the "HP Atheros AR9280 802.11a/b/g/n WLAN mini PCI card"?

  I mean, I want to change the map type Wireless 'G' for a type "N".

  You have any advice?

  Thank you very much.

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01035677.PDF

  Chapter 3 lists all cards supported wireless. I see no support for wireless since any N cards.

  I don't see the BIOS updates that add support for any model of card N Wireless either.

  Installation a unsupported card will cause the laptop does not cranking up what the card does not support is removed.

  Paul

• All my Apple Extreme routers must be 802.11ac to get speeds of ac?

  I think to replace all of our Apple upgrade routers to ac 802.11. I read somewhere that all routers, or even worse of all customers, must be compatible ac or the network will not work at speeds of HQ. Can anyone clear this up for me?

  Any other questions, I should consider to optimize the performance of ac in a home network that has 4 Apple extreme, connected between them to cover a bigger house?  Thank you.

  A network works at the speed of the slower part, then Yes. all routers must be AC so that the network to operate at the speed of AC.

  If you want high performance connect everything with wires.

• 802 11A, 1142 AP

  Hey

  If I deploy WIPT on 1142 AP series and using 802. 11A. I will work coz I read in the paper of cisco

  This series 1100 access point doesnot have 802. 11A radio

  Hello

  The 1142 has the Radio-A... where in the 1141 does not work... If the condition is to have a radio-A for WIPT, then it is possible... the fact sheets below link will know us to hv a Radio - A in 1142AP.

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps10092/datasheet_c78-502793.html

  Concerning

  Surendra

• Compaq 6715 b - upgrade to 802.11a/b/g/n or/AC

  I understand that I must pay attention to what network adapter I chose for this laptop (Compaq 6715 b, Win7) olde, but I have a nice 802.11ac new router and I would get this box using the pref/AC or less 802.11n.

  The current adapter is reported as PCI\VEN_14E4 & DEV_4312 & SUBSYS_1371103C & REV_02 (Broadcom Wireless 54bg,

  Broadcom wireless 1490 (dell))

  Which, if any, the adapter may seek this gearbox?

  Thanks in advance

  Hello:

  Here is the link to the service manual for your laptop.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c02834030-1.PDF

  The only available for your model Wireless N card is the Broadcom adapter of abgn with the reference number used in the country where you live - 441530-001 or 002-441530.  (Chapter 3, p. 29-30).

  You can install a wireless card for your model (not the 6710 (b) and it must have the part number HP on it or it won't work.

  My recommendation is to do a search by the part number HP on eBay and get an opportunity but tested and functional.

• 802.11A/n/AC vs b/g/n

  Hello

  I want to use the fast wireless channel (who can see only some computers) only for the desktop with wireless adapters and more slow single band n for printers and mobile devices etc. However, every time I activate the slower 802.11b/g/n network, all devices that connect to the slower network and no device connects to the network fast 300 Mbps. I use the newer cards (laptops or adapters Linksys or ASUS 450 Mbps PCI-e adapters), so there shouldn't be any problem concerning those.

  Is it possible that I can assure you that computers with maps to the right only connect to the network fast dual-band 802.11n?

  Thank you!

  Tibet

  PS: The Distance is not a problem, there is an access point literally almost all computers!

  Hi Tibet,

   I could not find the wireless card properties to use 5GHz, so if you could find a solution as I wrote above, that would be great.
  
  

  If you use windows OS, you can then configure your wireless NETWORK card to prefer more 2.4 GHz to 5 GHz. Here's how you set it on windows 7 ( Control Panel-> Internet network & -> network-> Wireless Network Connection-> properties connection [right click] -> sets-> Advanced-> band preferably)

  

  HTH

  Rasika

  Pls note all useful resposnes. *

• Update on Atheros AR5009 802.11a/g/n Wifi adapt

  I have a Home Premium HP Windows Vista 32 bit I bought about 7 years ago... only the computer that I have... always works pretty well... well that slow and slow, but only on wifi. So I installed a software to check for driver updates. It shows that the Atheros is old... installed in 26/04/08 available 20/08/11. My guestion is how to get it without having to pay for it. Shouldn't have came to me since I bought it?

  Hello

  Say you the computer; Wireless normally comes with laptops, unless you buy a USB Dongle wireless or Wireless PCI Card for your desktop.

  Get the drivers of the computer/laptop or a hardware manufacturer directly.

  Here is a link to the page of the HP driver.

  Enter your model number and then select the operating system to the appropriate drivers and latest.

  http://WWW8.HP.com/us/en/drivers.html

  See you soon.

• HP Pavilion G60-458DX - Suggestions for the wireless card must be upgraded to 802.11n

  Nice day! I hope that all have a nice time. I have a HP Pavilion G60-458DX running Vista. I want to upgrade the wireless card/adapter to support 802.11n.  I would appreciate suggestions compatible.

  Thank you and enjoy all!

  John B.

  Hi, John:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  Looks like the only available wireless N card's network without WIRE Atheros AR9280 802.11a/g/n map.

  Please see Chapter 3, page 3-7.

  Make sure you get this model with the applicable B21 HP for the country you live.

  For example: If you live in the United States you need part # 482260-001.

  The part is available new from HP for US customers for $63,54.

  My advice would be at the request of the part # on eBay and get a model used but tested this card for a lot cheaper.

  Here is a list of the card used for people living in the US.

  http://www.eBay.com/Sch/i.html?LH_BIN=1&_sacat=0&_FROM=R40&_nkw=482260-001&_sop=15

  No other N Wireless card will work but this one.

  And the card must have the part number HP on it or it won't work.

  You also have a great day!

• I use only 20 MB when you connect to the 802. 11A

  Hello

  I test aironet 1130ag with the wlc 2106 in my test environment

  When I connect to the 802. 11 a or g, I can get max speed 20 MB and not 54 MB

  What is worng and what should I check?

  Here is the basic configuration of the 802. 11A

  network 802. 11A... Activated
  11nSupport... Activated
  802. 11A of low band... Activated
  802. 11A mi band... Activated
  802 11A high band... Activated
  802. 11A operational rates
  802. 11 a 6 M rate... Mandatory
  802. 11-9 M rate... Support
  802. 11 a 12 M rate... Mandatory
  802. 11-18 M rate... Support
  802. 11-24 M rate... Mandatory
  802. 11A rate of 36 M... Support
  802. 11A rate 48 M... Support
  802. 11-54 M rate... Mandatory

  Beacon interval... 100
  CF Pollable mandatory... People with disabilities
  CF poll request mandatory... People with disabilities
  CFP Period....................................... 4
  Maximum duration of CFP... 60
  Default channel... 36
  Default Tx power level... 1
  DTPC status... Activated
  Fragmentation threshold... 2346
  Long retry limit... 4
  Lifetime maximum Rx... 512
  Service life of Max Tx MSDU... 512
  Medium limit of occupation... 100
  Pico-cell status... People with disabilities
  State of the Pico - cell - V2... People with disabilities
  RTS threshold... 2347
  Short retry limit... 7
  Threshold of TI-50
  State of the metric traffic flow... People with disabilities
  State of the accelerated application of BW... People with disabilities
  Profile EDCA type... by default-wmm

  Thank you

  When you say that you get only 20 MB do you want to say is that your data rate or throughput of your true?  If this is the true throughput which is right.  Remember that 802.11 is a technology of half duplex.  Half duplex and the management fee a client that connects to 54 Mbps can have a flow in fact up to 22Mbps

• "Assignment of a top layer of the object on the master" (master page numbers) I understand the layer must be up to show above images placed on the pages, but how can I do this?

  I have added page numbers to my master pages. They appear on the pages, but I have images on the individual pages which cover the numbers. I understand that I must assign a top layer of the object, but I don't understand how to do it. Please help me? Please explain a just clear as possible, I read the other replies but still do not understand. Wish it was as simple as select object, do a right-click, edit the layer!

  Thank you very much!

  1. open the layers panel (window > layers)

  2. in the control panel menu, choose new layer. In the dialog box, you can name the layer if you like Page numbers.

  3. on your main page, select the text block with the selection tool (black arrow tool) page numbers.

  4. If you now look at the layers panel, you will see a small square right of one of your layers (or 1 layer if you have not created any new layers). Drag instead of the layer of Page numbers. [Explanation: the square is a "proxy" for the selected objects.] [Drag to the other layer moves the objects on this layer.]

  Good luck!

• Satellite Pro A200-16YT - update wireless adapter card for 802.11n

  Satellite Pro A200-16YT (PSAE1E) with Windows XP Professional SP3 from the East.
  I tried to increase my existing 54 Mbps wireless network speed by replacing the Atheros AR5007-EG existing with 802.11n 802.11a/b/g more quick adapter.

  The Atheros driver is v9.2.0.439 (08/04/2011) it's later. I tried to install an Azurewave AR5BXB72 (Atheros AR5008) as a substitute, but without success. As well as trying the standard Windows wireless configuration, I used the Atheros Client Utility (ACU) which confirms that the card and the driver are installed and activated, but the radio does not, so no there is no association/connection to the wireless network!

  Reinstall the original AR5007 works without any problem. If someone experienced similar problems or can offer a solution, it would be greatly appreciated. Thank you

  Hello

  Not sure about this Wlan card but I read in the forum that some people had similar problems, allowing the new card Wlan.

  Check this thread for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=253505

  It seems that the problem is related to the assignment of the WLan card pins.

• Presario v5000 802.11n

  I recently acquired a HP Compaq Presario V5000 CTO that has no wireless card installed. I know that when this laptop was made the only one made for her wireless mini-PCI cards were 802.11a/b/g and I see that they are easily available from many sources. However, I wonder if an adapter Minipci 802.11b/g/n card work properly in this notebook.

  Also, I would like to know if the antenna is factory installed in it or if it would have no antenna, if it has been initially configured without wireless capability.

  Thanks in advance for any information you may have about these issues.

  You must find and install a card provided as OEM on the laptop wireless. HP implements a block of BIOS for cards not supported wireless. You must go on eBay or something and find a wireless card with a part this time HP number. With respect to the antenna, it was long as laptops haven't wireless antennas. The V5000 is pretty new I'm sure that the antennas installed at the factory in the world. To be sure just open the memory (the Central Bay on the bottom) and look for the antenna cables. Here is the Service Manual:

  Manual

  WiFi card on eBay:

  http://www.eBay.com/ITM/HP-dv5000-series-V5000-wireless-802-11g-card-392557-001-/270598907032?PT=LH_DefaultDomain_0&hash=item3f00f3a498

  So in summary, sorry no "n" Wireless is possible. If there are antennas there will be only two anyway and you need three for "n" wireless in most cases.