Support for EAP-FAST on Ironet 802.11A/B/G adapter

Similar Questions

• For EAP-FAST (inner EAP - TLS) authorization rule

  We have a deployment of ISE, where we seek to use EAP-FAST as our method of inner EAP - TLS authentication method. We check the computer and user certificate. We initially had the following condition in our AuthZ-> EapChainingResult = user and also successful machine rule, but we found that initially succeeded machine and the user fails after windows logon. If we change the condition of EapTunnelType = EAPFAST, then it works fine, logs show that although that initially user fails and machine is successful, after the windows shell login then log message has managed the user and the machine is visible. My preference would be to work with the first requirement, because it is a more valid check but it does not work due to the initial failure, anyone got the EAP-FAST (EAP - TLS) work.

  Concerning

  I have executed him at a client, and you've discovered only machine auth succeeded initially, it's because the user to store where the certificate of users is not open until they have logged ind, this does not work as expected.

  What you can do is to have two different authz, one for eapchainingresult = rules machine succeeded and the user has failed and another when both are successful. This way you can give a granular access by using another for the machine, so the machine does not receive full access to the network before a user is connected.

• VMware and Nexus internal support for layer 2 priority vSwitch (802.1 p)?

  Hello

  Can someone provide a definitive answer on whether different types of vSwitch manage layer 2 priority internally (i.e. 802.1 p).  In other words, these switches internally generate queues waiting seprate, based on the received priority tag 802,1 p, then manage each of these queues at the specified priority (highest priority first transmitted). Or what's a queue internal so efectively not a priority within the vSwitch, just from any external switch (physical) marking in the path.

  Interested in the answer for each of: standard vSwitch, Distributed vSwitch, Nexus vSwitch.  In vSphere 5 and above.

  I asked similar questions before, and no real clear answer.  Apologies if I've simply not spotted, but I searched the docs of VMware and Nexus and of course google pretty bad too.

  Thanks for the answers or pointers,

  PeterB

  The Nexus 1000v using CB - WFQ

  With Cisco Nexus 1000V Series Switches Release 4.2 (1) SV1 (4) or more recent, virtualization environments can now also enjoy based on a class of weighted Fair Queuing for congestion management.

  Here is a white paper.

  http://www.Cisco.com/en/us/prod/collateral/switches/ps9441/ps9902/white_paper_c11-704041.html

• The dv6429ea specification supports the "HP Atheros AR9280 802.11a/b/g/n WLAN mini PCI card"?

  The dv6429ea specification supports the "HP Atheros AR9280 802.11a/b/g/n WLAN mini PCI card"?

  I mean, I want to change the map type Wireless 'G' for a type "N".

  You have any advice?

  Thank you very much.

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01035677.PDF

  Chapter 3 lists all cards supported wireless. I see no support for wireless since any N cards.

  I don't see the BIOS updates that add support for any model of card N Wireless either.

  Installation a unsupported card will cause the laptop does not cranking up what the card does not support is removed.

  Paul

• N2024P support for 802.3at

  Hello.

  N2024P is consistent with the 802.3at standard (support 15, 4W/port)?

  In standard rendered datasheetsthe is not listed, I found that the data only 30, 4W/port is supported. I need this information to comply with the tender specifications.

  Thanks in advance, Br, T

  Dell Networking N2024P/N2048P and N3024P/N3048P switches

  PoE Plus configuration for power threshold, priority of power, SNMP traps, and

  Support for legacy of PoE device. PoE can be enabled or disabled administratively

  on a port by port. Power can also be limited on a port-by-port.

  Dell Networking N2024P/N2048P and N3024P/N3048P switches

  implement the specification PoE Plus (IEEE 802.1at), in addition to the

  IEEE 802.3af specification). This allows to be provided in class programs 4 pp

  devices that require more than 15.4 Watts of power. Each port is capable of

  offering up to 34.2W of power. Status of real-time power supply is also

  on the switch as part of the implementation of PoE Plus.

• EAP-FAST and the MAC with WPA2 on RADIUS authentication Local for 1242AG access point

  Hello

  Does anyone has a Setup for this combination work?

  Concerning

  VP

  Hi EAP - FAST didn't need any cert... We must generate CAP... Here is the link... that gives the comparison between different EAP

  http://ciscosystems.com/en/us/prod/collateral/wireless/ps5679/ps5861/prod_qas09186a00802030dc_ps4555_Products_Q_and_A_Item.html

  Here is the link to generate or use the CAP

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38local.html#wp1050270

  Let me know if that helps...

  Concerning

  Surendra

• Pavilion g6: Solutions for Ralink RT5390R 802.11 bgn wifi adapter problems r 4 Windows7, Windows 8-10?

  The screen message is ""RT5390R 802.11bgn Wi - Fi adapter Ralink has problems of driver or hardware-related " "

  In this forum, the given solution is for Windows 7 and 8. The same link he will solve for Windows 10 or is there another solution?

  Hello:

  There is a W10 driver, you can try for this model of the wlan card.

  5.0.57.0 Rev.A (June 18, 2015)

  Microsoft Windows 10 (64-bit)

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe

• Use EAP-FAST with ACS 5.2

  Hello everyone,

  I use Active Directory as external identity for ACS store. In ACS 5.2 Web interface to navigate to of access policies > Access Services and going tab protocols allowed , the only protocol that works is PAP/ASCII. In the documentation of ACS, it is described as the less secure authentication for ACS.

  I would use EAP-FAST. Should what command I enter on the aaa client to work with? The router's IOS version 12.4.

  Here is his aaa configuration:

  AAA new-model
  !
  !
  AAA server Ganymede group + ACSTEST1
  Server 1.1.1.1

  2.2.2.2 Server

  !
  AAA authentication banner ^ CCCCCC * GANYMEDE + server is not available, use local defC
  AAA-authentication failure message ^ C
  AAA authentication login default group Ganymede +.
  Connection authentication AAA VTY Ganymede + local group
  Connection authentication AAA CONSOLE Ganymede + local group
  the AAA authentication enable default group Ganymede + activate
  AAA authorization exec default group Ganymede + authenticated if
  AAA authorization commands 1 default group Ganymede + authenticated if
  AAA authorization commands 15 default group Ganymede + authenticated if
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  AAA accounting system default start-stop Ganymede group.
  !
  !
  AAA - the id of the joint session

  I have found no help in the Cisco IOS Security command reference or in the Internet.

  Thank you for your help.

  Best regards, Andy

  Hello

  GANYMEDE + authentication is only supported by the PAP, is not possible to use EAP-FAST.

  Please keep in mind that the EAP methods using RADIUS, and not with GANYMEDE.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• LEAP and EAP-FAST in the same access point

  Hello...

  We have an infrastructure based on 1142 APs.  Now, they have set up an SSID with JUMP as an authentication mechanism.

  The infrastructure is not a wireless LAN controller, access points are configured as standalone APs with SSID configured in each of them.

  The mechanism to authenticate the windows with JUMP positions was a little tricky.  We need now to migrate all stations to EAP-FAST, but without loss of JUMP environment during the migration.   You have to configure the APs to serve the two authentication mechanism: LEAP and EAP-FAST.

  Is it possible to have it?

  What should we do about it?

  Thanks in advance...

  For autonomous APs. If you are using:

  Authentication open EAP protocol

  Network EAP-

  It accepts virtually all EAP types, not depends on the radius server to have all active... for example EAP methods, if you are using ACS may the PEAP LEAP EAP-FAST, EAP - TLS at the sametime...

  So no matter what, the customer's server and the RADIUS wireless must match the EAP type configured... any type of EAP, the AP should support it...

• Cisco ACS 5.3 selection of service needs for RADIUS PEAP wireless and 802. 1 x Port Auth

  I use ACS 5.3.0.40.8 with GANYMEDE + maintenance device AAA and RADIUS maintenance the Cisco Wireless to access user AD environment. How can I implement 802. 1 x with the current implementation of RADIUS with users without distracting current thread or am I prevented due to the EAP - GTC used with PEAP via RADIUS?

  Sent by Cisco Support technique iPad App

  In general the EAP type is determined by the supplicant and the server

  so if you have configured for EAP TLS and client cable configured wireless client

  for PEAP MSCHAP v2, you shouldn't have any problems if you have access

  RADIUS service and handling the two types of active EAP and identity

  political as well as the authorization is right to the same target and the level of access.

  See you soon

  -------------------------------------------------------------------------------------------------------------------------

  Please don't forget to rate correct answers

• RALink RT3592 802.11a/b/g/n: Ralink RT3592 802.11a/b/g/n to 5 GHz WIFI connection problems

  I have a HP Probook s 4530 with a Ralink RT3592 2 x 2 adapter WiFi 802.11a/b/g/n and I try to connect to my wifi of 5G, but my laptop do not. He can see that the 2G version. My research on the web, I understand that it can use 5G, and my router broadcasts 5G because my phone use, so I can't work on what Miss me. Can anyone help?

  Best, Minoli

  

  Hello:

  The only suggestion I can offer is to try the latest driver directly from Mediatek (Ralink).

  PCI / mPCI / CB (RT2860/RT2760/RT2790/RT309X/RT35X2/RT539X/RT3290/MT7630)

  30/06/2015

  Win7 32/64 Win8 32/64 Win8.1 32/64

  Win7:5.0.55.0 Win8:5.0.55.0 Win8.1:5.0.55.0

  I had the same problem with the USB dual band Ralink wireless adapter.

  He showed only the 2.4 GHz band, and I knew it was a dual-band card.

  My first conclusion is that the adapter was defective and only 2.4 GHz radio worked.

  I searched on the internet about the adapter model and found that someone suggested to install the latest driver for Ralink for it that has indeed brought the 5.0 Ghz band to life.

  Don't say this is absolutely going to work for you, but you have nothing to lose by giving it a try.

• HPM9265: HPM9265 AHCI support for SSD

  Y at - it a reliable update for the 'Intel Matrix Storage manager Option ROM v 7.6.6.1002 ICH9R' which will allow my SSD running with AHCI?

  You are the very welcome.

  Trim is not supported in your PC, as it is.

  Unfortunately, I do not know what the consequences are for not having not TRIM support.

  I cannot say if adding a third party sata controller would be better than what you have now.

  There are several different cards to choose from, but which is the right one for the scenario that you are?

  I have seen that some say 'support for SSD.

  Who didn't tell me much.

  Some people say that the PCIe x 1 slot slows down the drive.  Others say it's faster.

• Maximum capacity supported for card SanDisk® sport Clip

  Announcement pls advise what is the maximum capacity supported for the SanDisk® sport video memory card!

  Thank you.

  The Sport Clip has a limit of 2,000 songs to memory card database. The separate database for memory internal

  has a limit of 2,000 songs. Maps of size greater than 32 GB in FAT32 format can work well in the Sport Clip, or they could be problematic. The problem is that these cards are class 10 or faster and faster than the class 4 cards could cause problems in the Sandisk players. If you want to be sure of not having compatibility problems with a card, then the largest capacity card to be used in the Sport Clip is a Sandisk 32 GB class 4 microSDHC card.

  Some other brands of 32 GB cards could cause problems to allow, even if they are class 4 or slower. I suggest you get a Sandisk 32 GB class 4 card microSDHC sealed in a lot of detail from a reliable dealer. They are now cheap.

• Support for the development of the Playbook JSON

  Hello.

  Tablet OS SDK for Adobe AIR does support the analysis of an API in JSON? We can parse JSON in playbook in other words.

  Thanks in advance

  Although I do not know there are third-party libraries you might find with Google, I'll just note here that AIR 3 includes the JSON class as one of the API high level.

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/JSON.html

  Let's get AIR 3 as part of the upcoming 2.0 version, I think this support for this building is probably your best option.

  Edit: Note also that this is done apparently with native code, it should be much faster than any existing third-party libraries, you can find.

• EAP-FAST + new user without certificate

  Hello classmates

  can Yyou you please share a situation with me?

  I ISE 2.0 with certificate based authentication using EAP-FAST. When a new user who never logged on the machine, try to connect... the user certificate does not exist and anyconnect found no valid certificate... and that's my problem.

  I have to allow this user to connect on my PKI and run the GPO update to download the certificate.  is it possible to impllement without any certificate eap-fast authentication? example:-anonymous certificate or self-signed certificate?

  Thank you

  Hello!

  So what you see here is the expected behavior. Your machine is not allowed on the network until it has the appropriate certificates, but you can't get the appropriate certificates until you connect to the network :)

  So, what are your options here:

  1 use the mode of low Impact instead of the closed mode. This allows you to define a pre authorization ACL that grants limited access to new machines so that they can enter all necessary GPO, certificates, etc..

  2. you can configure a rule based only on the computer certificate that allows limited access that will allow the user certificate to be issued. After that, a certificate of authenticity can be started and the user will then authenticate using both the user machine identification information +.

  I hope this helps!

  Thank you for evaluating useful messages!