[WS10] Boot to the BIOS and UEFI

Similar Questions

• HP Envy m6 1125dx: how to upgrade the bios and uefi without a hard drive

  I can't install OS, including Windows 8.1 discs. After that I get so far along, installing Windows says there is no hard drive, but it's there!

  I see that my BIOS is outdated. When I download the new BIOS from hp.com, I get an executable file

  which of course does not work on a computer that does not start. I can't find the bios file when I run

  the executable file on another laptop.

  So, I want to update bios and uefi to see if that helps with my problem.

  The current Bios is F.11

  Fred

  oakman2 wrote:

  SP66782.exe is what I get when I download from the HP web site. It is a windows executable that updates the

  The BIOS on the computer that runs it.

  I don't think it will run without windows is also running.

  Quite true.

  See the image below.

  What is necessary to do is to extract the sp66782.exe file to a folder on the second computer.

  Rename A 018, 4. FD file to 018 has 4. BIN and save it to the root of the USB stick.

  Plug the key into a port on the computer laptop problem.

  Press the power button / stop the laptop and immediately press and hold the Windows key and the B key until the phone reacts and starts the BIOS recovery.

  If all goes well, that will recover the BIOS corrupted with the new copy which is on the flash drive.

  There is a detailed description of another method to do this on the thread of the forum according to 3rd party.

  https://www.BIOS-mods.com/forum/thread-success-solved-semi-bricked-a-HP-DV6-3225dx

  Using this method will result in certain risks that you have to accept if you decide to follow this way to unbrick your laptop. Any update of the BIOS manually is risky.

  

• Windows 8 - booting in the BIOS and driver AMD does not?

  HP Pavilion Dm4-3011TX (Beats Edition)

  Windows 8

  Well, my first problem is that I don't know how to boot into BIOS sice, that I've upgraded to W8. I tried to press F9, F10 and all these kinds of buttons, but nothing seems to work? I also tried to go in the boot advanced settings of laptop, but I couldn't find something in there that had nothing to do with the BIOS. Any help?

  My second problem is one of my GPU (I have switchable graphics) dosent m AMD Radeon HD series 7400 seem to work.

  Almost every time that I start a message appears saying that the catalyst has not been installed correctly and its not made for this type of Windows or something to that effect. Is it because I've updated to windows 8? When I go to the Device Manager and do a right click; Go to properties and it comes up with this message in the device status:

  "Windows has stopped this device because it has reported problems. (Code 43) »

  I need help because basically, I use the Intel HD graphics 3000.

  It should always be F10 to enter the BIOS.

  Have you removed old drivers for Windows 7 and installed Windows 8 drivers of your support page?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5254490#N505

• Acer gateway ne570 won't boot upward and I tried the bios and it always detects the hard drive

  I have an acer gateway ne570 and it does not start and I tried the bios and it always detects the hard drive but first boot priority is boot windows which is the only thing on the menu Manager startup options when you press on enter where the box "no boot device, press a key" comes after starting the laptop and when the gateway logo appears. I've had for over a year and the hard drive still works and my laptop didn't come with a recovery or recovery usb drive. And I also used the alt + f10 button that linked me right back to square "no boot device, press a key. Anyway, what should I do?

  you need a PC to use the tool of creation of the windows window.

  to boot from the CD or USB, press F12 on startup and choose the correct boot device.

• I have problems to install the UEFI BIOS and UEFi diagnostic on my HP probook 4530 s

  I recently bought the probook 4530 s, but for some reason, my hard drive has begun to view the status of the dynamics. I reinstalled the window and the status of the disk was returned to base. However, now I have a problem in installing UEFI BIOS and UEFI diagnostics. whenever I try to install it, a message that you do not have HP_Tool partition would like to install it? I hit the Yes button, but as I already have 4 discs on my new system fail to form. Thus, the operation failed.  so can you help me solve this problem?

  Hello

  Go to control panel, administrative--> computer management tools, and then disk management.  Take a look in the box that is the Center and the top. List of all partitions and the layout and type.

• HP 15-ac108na: how to enter the BIOS and the RECOVERY of the screens, please?

  Hello

  Can anyone help? I need to know the keys to press to enter the bios and recovery screens. If I missed anything like splash screen, then I need to know this as well.

  Buy laptop just left Saturday. Quite happy with it really.

  Hello

  Shut down the laptop - like you are on Windows 10, do this by holding down the key SHIFT left click Shutdown to temporarily prevent a boot hybrid.

  Click next to the ESC key as soon as you press the power button to access the Start Menu.

  From there, you can access by pressing f11 recovery options or the menu of the Bios by pressing f10.

  Kind regards

  DP - K

• How to access the BIOS and disable hype-threading on xp

  How to access the BIOS and disable hype-threading on xp

  THX

  During the initial boot, you should see a brief message posted to press a specific key (usually the delete key) to access the BIOS. If there is an option to disable Hyper-Threading, you will need to find it.  You can also see if there is a guide for your motherboard and the BIOS options.

  Any reason, you need to disable?

  J W Stuart: http://www.pagestart.com

• 2000-2b09WM HP: flashed the BIOS and now cannot see hard drives.

  I was trying to install Win7-64 on this 200-2b09WM. I flashed the bios, and now BIOS can even see hard drives.

  I used the 67259.exe softpaq file

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67259.exe

  Any ideas on how to solve this problem because I can not install andy BONE and can not boot from floppy, cause there's not?

  Have you tried to boot with the Windows disk since the last error? If this laptop comes with Windows 8, it can have Secure Boot enabled to avoid booting from cd/dvd. Check the BIOS.

• How can I check if I have a virus in the BIOS and what is the difference between formatting and full format in Windows 7?

  Hello

  Recently I found a rootkit on my computer, especially rootkit.tdss.tdl4. Of after I read that I got one of the best!

  I have two questions:
  Firstly - how can I check if my BIOS was hit without blinking? I read that this Trojan horse could have started exactly from the BIOS, and very likely to stand again after doing a clean install. I have a laptop HP seems like flashing procedures require to disconnect the disk hard - is this true for laptops?

  Second, is how I format to ensure that clean the MBR? I have Vista and want to upgrade to Windows 7. I have Windows 7 upgrade ultimate disc that can do a custom install which should format entirely. Tell me if I think too old school here but should be low (or zero) format is required? From what I've read, the function of full format of Windows 7 should be as powerful as the low level. is that correct? I don't mind the overtime work as long as I don't have any problems (at least with this Trojan) later. I also fear that upgrading Windows 7 disk might not have all the features of formatting as a full version, which is a nonsense?

  Thank you very much for your help!

  (Tdsskiller Rootkit removal tool)

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  In addition, suggest that you scan your computer with MalwareBytes' to remove all traces that may still be present.

  MalwareBytes Anti-Malware (MBAM)

  http://www.Malwarebytes.com/>

  The free version of MBAM is a scanner at the request and offer no protection "real time". Keep and use it as "second opinion" scan.

  Windows 7 tools to format the drive should be sufficient:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• HP DV6 of the computer stopped working after the update of the Bios and Memoryupgrade

  HP DV6 - 3161EO

  XE068EA #UUW

  Hi, I bought a brand new HP with Intel I5 processor computer and GUI double, its been working well so far and I thought that I should upgrade the Bios and memory as well.

  So I did, I bought memory 10600 and crusial 12600 and corsair, a single and two put in correspondence of the sticks, just to be in business, and I've updated the bios. of F.13 to F.29

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=SV&CC=se&DLC=SV&sw_lang=&product=4344...

  The computer worked perfectly for about 4-5 hours, then there are allmost quite dead.

  Ive tried to pass on different memorycabsm like the original samsungs that came with the computer.

  Ive tried the famous "hard reset".

  Nothing, the computer starts "boots" but don't approach the entered message turnes off.

  Presedure same each time.

  Any memory I put in, the same result.

  Ive used different powerbricks, turned of the computer resets hard, between 10s 2 min, picked up the bios battery, has offered free energy.

  Let the rest of the computer for half a day, put it all together exept cmos battery = exactly the same as before.

  "take out all the memories and the computer works and get that caps lock flashing light.

  So my question is this

  Why you encourage people to update, when it's clearly the fault at hand.

  Sell your computers with 8 GB of ram from the beginning so the people do not have upgraded later because your hardware is not able to manage different memorycaps of accepted and authorized as crusial or corsair providers.

  Ive built perhaps 50-60 computers and had about 10 laptops and NEVER had a fault like this.

  My laptop $1200 is useless, and I actually held you at HP responsible of it.

  The computer is of course out of warranty, so its my own falult, as usual.

  «A simple question, is there a way to 'force' a new bios on the Board, without memory of the computer, because it is the only time where it works and works welll.»

  Thnx, 'a sick owner HP.

  For later use, it's really kff upward, but I got it working again.

  1 changed the original memorycabs for much faster, 1600 mhz, I know that this mobo doesn't support, but he did start the computer, so I could run the Windows + arrows Bios recover.

  Installed the HP bios tools F10 + GIS and it worked.

  so I guess I have to myself a thank you and a boost of the kudosbutton, hahah

  Well, when your computer went down, don't give up and try everything you can, this prob took me about 3-4 days to eradicate, but now its working again.

  See you soon

• Time to update the BIOS and firmware of remote management?

  I'll put up a 'new' ThinkServer RD630 (2954A6U). It was purchased for a project that never happened, and we are now dry and reuse to replace an old Office Server. The current firmware versions are:

  • BIOS: 2.05
  • ME: 2.1.5.73
  • BMC 1.7
  • IPMI 2.0

  Page 61 of the User Guide ThinkServer says, "update the BIOS on your server only if the new BIOS version specifically solves a problem you have. We don't recommend updates to the BIOS for servers that do not need. [...]"

  As far as I know, we have no problems. The system starts fine and runs Windows Server 2012 well enough.

  HERE'S MY QUESTION:

  Should I update the BIOS and firmware IMM (remote management) to the current version? Are there hidden problems, security issues or other concerns that it is worth?

  Other indicators of initial configuration that you can share with a new admin would be much appreciated, too! Thank you.

  With the help of the Lenovo Support, I was able to fix my problem where I couldn't get to the menu of the BIOS of the 630 RD (in F1) and all I saw was a cursor on the screen. I describe the procedure in detail here:

  https://forums.Lenovo.com/T5/ThinkServer-rack-mounted/BIOS-settings-blank-with-cursor-after-BIOS-UPD...

  Thank you to all those who commented above and especially to those who have sent me suggestions via PMs.

• HP 15-r203nv: model: 15-r203nv keyboard works in the bios and only safe mode.

  Hello there is a problem with this laptop, the work of keyboard in the bios and in safe mode and during my convalescence... but it does not work in normal mode. (F12 wifi light is white)

  Thank you very much

  model: 15-r203nv rev: 2213-120 products: L0E81EA #AB7

  Hello

  The fact that it does not work with a clean install starts to point to some kind of hardware problem, although it is strange that he will run in Mode without failure.

  Click with the right button on the taskbar, select Manager tasks, click the Startup tab - right click on each entry in turn and select Disable.  Once completed, restart the computer and see if there is no change.

  An update of the bios (F.39 Rev.A) is also available on the Product Page , which can be useful if you have not already done it - if you decide to apply, make sure you unplug all the devices (including the usb keyboard) before starting the update.

  Kind regards

  DP - K

• HP EliteBook 745/755/725 G3: Missing 'Label restore electronic tool' to fix the POST error boot in the BIOS 1.08

  The latest BIOS for the HP EliteBook 745/755/725 G3 made reference to a 'restoration tool electronic Label' to remove a MESSAGE error after flashing the BIOS to 1.08.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_160552_1&swEnvOid=419...

  According to the release notes: "NOTE: for systems that do not comes with BIOS version 1.05 or later, this utility may be required if the BIOS has been updated.» Visit the page of the BIOS and drivers on www.support.hp.com and follow the instructions using the Restore tool from HP on the electronic label. »

  This tool can be found on the support Web site.

  If flashing the BIOS is causing this problem for systems shipped with a version of BIOS before 1.05 why is the tool not available to correct the problem?

  Better question is why was - this BIOS update published at all if it can cause a system to stop for 15 seconds during POST if you do not have the correction tool POST message as described in the release notes and the POST message?

  Version 1.01 of the electronic Label restore tool has fixed my problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_162255_1&lang=en&cc=us&hprpt_id=HPGL_ALERTS_1873677&JumpID=em_alerts_us-us_Mar16_xbu_all_all_641843_1873677_LaptopsandHybrids_routine__/

• How to enter the bios and virtualization of hardware (or software) turn off? On Hp 3400 mt series

  I have HP 3400 MT SERIES

  motherboard: Foxconn 2ABF 1.20
  Version of the BIOS FRIEND brand: 7.14

  How to get into bios and disable (hardware or software (I don't know)) virtualization that I have to open mac osx 10.7 in vmware

  Enter the BIOS and look in the Security section, as shown in the image below. If that's what you see, then activate the virtualization technology and it's done. You will be able to use Sun's VirtualBox and other virtualization programs later

  

  Best regards

  ERICO

• UPDATE THE BIOS AND HARD DRIVE

  Hi, I'm going to do a clean install of win. 7 home Premium and I would like to upgrade the Bios and installing a hard drive SSD 120 GB and 2 GB of ram.

  Desktop PC

  5226Model #: CQ5226UK
  Product #: VS273AA-ABU
  Serial No.:[personal information deleted]
  Software Build #: 94WEv6PrA3
  Service ID #: 111-709
  PCBRAND: Presario

  3200AAJS-60M0A0 320 GB WD HARD DRIVE

  Intel pentium dual core 2.6

  PC built Sept 2009

  I looked at the Hp site but could not find an update for my bios.  Mobo is Foxconn Eton 1.0 and the Bios is FRIEND 5.05 25.09.2009

  A scan utility (Bios Agent) indicates that there is an update, but they require payment for flashing the bios.  In case I have some concerns, and many would prefer to download Hp or Foxconn.  I looked on the sites Web from Foxconn and FRIEND, but they require a lot & a lot of information that I don't have and don't know where to find them. I was hoping someone might have the same PC to give me information.

  Also to install the disk SSD drive I brobably would need an adapter to allow the reader to 2.5 inches to fit into the drive 3.5 "bracket. Apart from this, the connectors on the SSD drives all seem to be the same.  is this correct please or will it take a SSD and a specific to my PC case and my existing hard drive adapter.

  Thank you

  Hi thanks for your help, advice and information: my PC was purchased in January 2009 is a little more than 4 years.  The upgrade would cost 130 pounds. I could not buy a decent PC with 4 GB ram and an SSD for under £500.   I do not download music or movies, or make more than a small base video editing so I'm sure that with these improvements, there will be more than enough for me.

  One thing doesn't bother me.  It seems that when buying a PC Bios updates are available for the first 2/3 years, but not thereafter.  It would not have occurred to me to look for an update of the bios, during this period just simply because I thought that they were issued only when necessary to take into account improvements and new technologies so thanks for that. you live & learn.

  I'm trying to teach me the 'nuts & bolts' repair and fix PC problems and I guess that's the main use for my PC.  Experiment with a new £500 Pc would scare me to death.

  I'm on Linux Ubuntu 13.1 without any problems on my PC Dell 9 years and XP Pro on my HP Pavilion 13, so maybe I can do my Compaq last a little longer.

  Once again thank you very much.  its part of the process of learning.  see you soon