network flood ldap client applications

Similar Questions

• Implementation and Infrastructure Server to a client Application

  Hi friends,

  I'm new to this group, infact new in this field and technology as well.

  I intend to implement a Java client on BlackBerry application. The way that I want to build the GUI of the application uses a XML file returned by the server (J2EE based), analyze dynamically and build GUI components.

  Since then, connection to the server every time and checking the file takes a long time, I would like this file to be pushed on the server each time it is updated and the client should receive and store locally on the device. Timing of the launch, these stored data are read to build the GUI.

  Content, from what I read so far, it's possible spawning a listener thread on the client side to run in the background and listen to the Server grows regularly.

  If the above said is fine. I would like to know the details of infrastructure, configuration and deployment required for the implementation and test on a physical device and emulator backberry, such a request.

  -I can create a client application using backberry than GUI related API and write code to spawn the background thread to listen to a port

  Question) how do I know if the port to which I have listened to and how to deploy the application on the device?

  -Server code will be used to push the XML to the client using POST

  Question) how to set up devices in destination to which data must be pushed?

  Question) what role do MDS and BES play in this communication?

  As a user of the device blackberry and developer, how can I get access to Blackberry Enterprise Server?

  I'm extremely sorry for this long message.

  I would be grateful if anyone can provide suggestions or ideas.

  Thank you

  Suresh.

  # 1, you can create an application to auto-start.  In, open the properties of the project for the application by right-clicking on it in BlackBerry JDE.  Click the Application tab, then check the Autorun at startup feature.

  #2 is supported by the BlackBerry Enterprise Server.  It provides content to the BlackBerry on the wireless network.  If you're looking to push the same data on multiple devices, please see the following link

  What is - Push content to multiple users in a single push request
  Article number: DB-00517

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800662/What_Is...

• Is the signature required when you deploy the client application in the device?

  Hello

  I am trying to build my own version of the sample application client push. I have two questions:

  -First of all, is there a way to test shoot BIS Simulator, workaround, maybe?

  -Second, is it necessary to sign API classes used in the sample client application before loading it into the unit? The sample application works fine on the camera, but a version that has a very slight modification does not work, does not even start. Could it be linked with code signing?

  Thanks in advance,

  Burak

  You can't actually test pushes BIS with the Simulator. You can test your application without feature push using the Simulator.

  Yes, you will need to sign the application unless your device is "unlocked."

• How to remove a specific email inbox with the client application code?

  Hello

  How to remove a specific email inbox with the client application code?  Please suggest useful links.

  Advanced thanks.

  Concerning

  Sunil.G

  Your question is a bit broad, so it is difficult to give you details.

  First of all, you must have the ID of the original message. Usually, you get either by hanging the message when he came into the Inbox (by implementing FolderListener), or by retrieving a list of mail of enamel "Store".

  Once you have this message ID, you call Folder.deleteMessage ().

  Here, there is a laboratory of Developer:

  http://NA.BlackBerry.com/eng/developers/resources/Labs/listeningforemail.jsp

  Moreover, classes to look in the API of reference:

  Store

  Folder

  FolderEvent

  FolderListener

  Session

  ServiceConfiguration

  Message (message RIM, not the J2ME)

• Module Client application Interface

  I defined a method in my application module

  public MyType getType() {}

  call a VO and turn the line into MyType

  }

  Then, I want to add to the interface of the client application module. The problem is that the method is not displayed.

  I did MyType serializable by extending it with java.io, Serializable.

  JDev 11.1.2.4

  Works for me, I just have to test:

  	interest test public ex_test() {}
  	Returns a null value.
  	}
  	public class test implements java.io.Serializable {}
  	}

  And I am able to export ex_test() AppModule customer interface method

• SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

  Can Hello anyone help?

  After you configure Subversion in Dreamweaver, I get this error again!

  SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

  even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

  with & without quotes, with or without; before C

  command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

  I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

  Just a reminder!

  1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
  2. I managed to get the latest SVN version
  3. Lock, unlock and commit a file
  4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
     
  5. I also tried the same thing in the User Variables
  6. Installed the extension DW Subversion compatibility
  7. 
     Tried to run the compatibly with the command > Subversion comparability in DW
     

  Welcome any suggestion to solve this?

  Hello

  There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

  As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

  PZ

• Unable to launch the Client Application-vCO and strange error - "exception on Hibernate JDBC data access...". "

  Hello

  We have an integrated vCO 5.5.1 installation with vCAC 6.0.1. The installation worked very well. Recently, we encountered a problem where we were not able to run that any associated workflow vCAC. The following error is thrown " " "JDBC Hibernate data access exception: SQLException for SQL [?]; State SQL [null]; error code [0]; Cannot release the connection; "the nested exception is org.hibernate.exception.GenericJDBCException: cannot release the connection in vCO. Do not know what is happening with the vCO. Can someone help me on this? It's urgent!

  
  

  To resolve this problem, all plug-ins have been recharged and services were restarted. That has not helped.

  There is another issue that is to appear after that. We cannot launch the vCO Client. Fig. 1

  We are not able to access the following URL: https://<vCO-IP-Address>: 8281 Fig. 2

  We are able to access the configuration of the vCO page (https://<vCO-IP-Address>: 8283) and the application of the vCO page (https://<vCO-IP-Address>: 5480)

  Your help would be appreciated. Thank you.

  -SK

  Not many details have been given to us. I just resolution. In the Configuration of the vCO page, under the network tab fair value 0.0.0.0 IP address and restart the Server Configurator vCO. Login back to the Configuration of the vCO page and restart the service. It worked like a charm! It is the resolution for the vCO is not opening in port 8281. Once this is done, even the vCO Client began to open.

  Come to the JDBC error, as soon as this problem has been resolved, did not appear the JDBC error. So, I'm not sure about the exact resolution for this.

  -SK

• The client application streaming

  Is there a good app to play movies/music/photos that are broadcast on the network?

  HTC offers a pre-installed application ("Media connected") who can do it, but is there something similar on the Android Market?

  It would be great if we could get XBMC for Android.

  Ah zero of this post, I just found that I should have sought "UPNP" on the market.

• Network streaming - stand-alone application

  Hello
  I wrote two screws that communicates with network streaming, they work very well. I have applied (Build .exe) and try to run as both standalone applications. They cannot allocate each other.
  Probably, the definition of the endpoint URL should be changed due to construction.
  Please advice.
  Gabi

  Congratuations - you ran in a very subtle point that NEITHER has not explained well!  The 'official' name of an endpoint is:

  neither. DEX://host_name: nom_du_contexte/endpoint_name.  As NEITHER explained somewhere, the name of the Protocol, "ni.dex:", is not necessary.  They also explain that, when the host_name is 'localhost', she also is not required.  What is less clear, is "What is the way?"

  This turns out be the name of the application that runs under the specific end point.  When you run mode development, programming of your application and test it by pressing the arrow to run, the application is "LabVIEW" (technically, it's 'LabVIEW.exe', but also the .exe is not necessary).  As is the way by default (without papers), you need not put it in the string.

  However, when you build executable files, the context changes.  To clarify, I built executables called 'My Host' and 'My Target' (especially if there is no error between the VI, 'Host.vi' and the executable file, 'My Host.exe"instead of"Host.exe").  In Target.vi, I changed the strings to flow to start //localhost:My target, and in Host.vi, I changed the specifications for the URL target to include ": my goal."  Extracts showing these changes are included here.

  Either way, I could not host and target screws you have included in your ZIP file to work in development mode, so I started, taking the host and target live of my examples of LabVIEW 2012 directory, copy them into my LabVIEW in My Documents folder and a new construction project.

  Note that, as written, this version of the code will work only as an executable file (because the way is no longer LabVIEW).  If you want to write a routine that will work in the development and Run-Time environments, simply look at some properties for the Application.  I didn't think to do that until I already wrote this note, that is why this code is not in the previous examples.  However, it is probably better written as a Subvi, as it should be used by the host and target live

  Good luck.  Let us know if this fixes the problem for you.

  Bob Schor

  

• This product does gateway use - even as a Client application Antivirus - McAfee Antivirus

  I am unable to find that a statement of the gateway product AV Antivirus uses.

  Single customer applied and it uses McAfee.

  Anti-virus gateway - provides antivirus protection for your network in real time.

  Anti-Virus client - offers protection anti-virus desktop and server with software on each computer.

  We have details in the Administrator's guide. Click here for the Administrator's guide.

• How to create a Websocket Java client application that receives incoming Messages

  Hello

  How to create a Java only incoming Websocket application receives Messages?

  For example, here's a Html 5 Websocket:

  http://html5demos.com/Web-socket  That runs on that server for Node.js: ws://node.remysharp.com:8001

  Now I want a Java client side? How can I achieve this?

  Moreover, my main go is for users to post messages of the web and goto the smartphone blackberry with this application.

  Looking forward to your helpful answers

  Hamid Weiss

  It is quite easy to create a socket to listen:
  "socket: / /: 79 sets a socket server incoming on port 79.
  See http://www.blackberry.com/developers/docs/7.1.0api/javax/microedition/io/ServerSocketConnection.html

  However, you should be aware that a mobile device is not directly accessible (except wireless) because they do not receive a public ip address on a wireless (keyword NAT).

  to resolve this issue it is support to push.
  See http://docs.blackberry.com/en/developers/subcategories/?userType=21&category=Push+Service
  (the link below goes to the 7.1 API for java bb).

  If you are new to development, you should think about the new platform bb10 so when you expand.

• About WLC 4402 LDAP client authentication

  Hello

  I'm install a WLC 4402, the client wants to authenticate users with the LDAP and what he expected to use current users in AD, however

  I just read some documents as reference 'Local EAP authentication server on the Wireless LAN Controller with EAPFAST and LDAP
  Configuration example"and «Web authentication via LDAP on LAN Protocol wireless controllers (WLCs) example Configuration»

  Require both the then to define a new OU and define a new user and select anonymous feature of Bind.

  My question is, should I add all current on AD users on the new ORGANIZATIONAL unit in order to be authenticated as a wireless client?

  I hope that someone of you can clear my doubt

  Kind regards

  Note that LDAP with AD requires no methods EAP-mschapv2. If you can't do PEAP-mschapv2 with AD as LDAP backend. EAP-FAST EAP-FAST (GTC) and no EAP-FAST (mschapv2). It is a limitation due to the way in which AD works in LDAP mode.

  The anonymous bind is not required at all, that it is to be like this in the example. Usually, anonymous bind is not allowed by default on the current version of windows server.

  You are not forced to push all the users in an OU. Simply give a search base DN to the WLC where the WLC can reach all customers on AD. If all your users organizational units are at the root of your domain, you will need to give "DC = domain, DC = com" as base DN and it means that each search will arrive on your entire ad, which isn't super effective. That's all.

  Nicolas

• I know where to go to find how to install a client application of e-mail but tell us how to run this item for a true association on my machine

  It cannot send a scan without this small point, cannot send pictures from windows photo gallery. without the e-mail client connected

  I have two emails Hotmail and yahoo. Please give an answer that works simple and surely thank you!

  Hotmail and Yahoo are not mail clients, and this is why you can not scan to e-mail.
   
  This workaround might work for Yahoo. If this isn't the case, you will need to analyze your hard disk, and then attach.
   
  How can I make Yahoo! Mail my default email application?
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
   

• (Steam, Skype etc) client applications do not connect to internet [solved]

  Short time, none of the applications that require a stable internet connection, including games mmorpg detects an internet connection, but google chrome works perfectly well.

  Ive tried to check on services.exe solution for dhcp client option wifi router power management solution and

  my firewall is not blocking one any of these applications

  I also tried usibg internet connection wired, but which did not help either.

  Thank you for having responded

  I have to admit I did those of before, and they did not help

  Ultimately I solved the problem of the restoration of the system at some point before you install the most recent update of the system

  Thank you tough that responded to the questionnaire.

• Configuring user and group LDAP in application of the ADF

  Hi all
  
  I have to use LDAP user and groups in my ADF application. I have configured the LDAP Protocol on WLS Server successfully and you can see all users/groups under the tab "users and groups". I added the role of business in jazn-"Data.xml" corresponding on behalf of the groups. Created the Application role in jazn-"Data.xml" and assigned a business role role.
  
  However, not added any user in jazn-"Data.xml". Which I do not necessary because it will be taken from LDAP.
  
  Now how to set up the JDeveloper for use these users? What changes must make jazn-"Data.xml"? or jps-file config.xml / web.xml / weblogic application. XML
  
  Did I miss nay configuration step. I just ADF security set in place the tutorial step by step - quick - question but not found it useful
  
  I use JDeveloper 11.1.1.5.
  
  Thanking you in advance.
  
  Mukesh.

  Hello
  So, these are the steps:
  1. create an application role and the role of the company in the jazndata file
  2. map of the application role business role.
  3 the provider in the default domain also create sufficient brand
  4. change the default identity provider and set it as sufficient.
  5. start the application and connect using the enterprise user who has group companies are assigned.

  Here are the steps...