X201t Pen problem

Similar Questions

• Pen problems

  Okay, so I downloaded several versions of flash and animate to try to solve this problem. Technically good now I'm on Flash CS6, but the problem exists in all versions of Flash and Animate I tried. So, I'm on a 64 bit PC, it is a surface 1 pro with drivers wacom for drawing. Whenever I try to use the flash and only flash, Photoshop for example works fine for the drawing, I can't draw. It is difficult to explain through text then try too hard you can visualize this. So, I put my pen down on the canvas. When I put down the pen, he made a mark that he is ready to start a race/line. When I'm trying to continue the race by moving the feather, but, nothing happens. But whenever I go to my mouse I can move around and continue the race. I've known idea what could be the cause. I have used many other programs drawing on this same computer, none reproducing the effect it gives me. Would be very grateful for help.

  Hello

  Animate is a Wintab app and requires drivers WinTab detect and work with pen pressure and Tilt. You can also visit the Microsoft Troubleshoot Microsoft Surface Pen with two side buttons page for more information.

  Thank you!

  Mohan

• Traffic of pen problems

  Hello, I have a problem with my intuos wacom pro, whenever I try to do something specific, especially of color pick, the cursor moves, but as soon as I lift the pen he will return, as if the action was listed not somehow, I made a gif here so you can see what I mean : https://thumbs.gfycat.com/ShallowWildBarbet-size_restricted.gif . It's really frustrating and selecting a single color is very time consuming. I have 10 windows and did not have this problem when I was on windows 7. I tried to update the drivers of the intuos. I also use Sketchbook pro and the same happens except that instead of returning to the position, the cursor does not move for 1 second, then moves. Please help me, I don't know what to try.

  In the control panel windows 10 Pen and Touch I also turn off press on and hold.  What helps to see.

  

• Pressure HP spectrum X 2 Pen problems

  I just bought a spectrum of HP X 2 and installed Photoshop CS6 and tried to test the pressure sensitivity (one of the main reasons I got this laptop) to find that it does not work, I then tested it in sketchbook, and it worked fine.

  I tried to play with the brush settings, but when I select the pen pressure what happens with a sign of error next to him, I have also tried installing the Wacom drivers I've read might work somewhere, he didn't complete the installation, because it is an incompatible device.

  does anyone know a fix or it is just incompatible with this laptop?

  Thanks in advance

  I found a work-around, if anyone has the same problem.

  I just got a trial of cc of Photoshop and it works fine with that, simply not CS6

• pen problem after a reboot mode X200t slate

  I had following problem: after Windows restarts using the slate, I always get the pen doesn't work does not correctly, it's always in the upper left corner of the screnn, every time I touch the screen.

  TouchPoint works well.

  The only solution is to reboot the Dual Wacom Penabled Touch in Manager (stop and start again). This isn't comfortalble, cause, you need one-slate, restart and put the Tablet slate.

  All the drivers are updated to the latest versions.

  I have Win7 32 bit

  C.

  RESOLVED:

  Edition Enhanced Multitouch Driver (last version 7.0.2.19)

  Instal Driver Multitouch (latest version 3.0.0.3)

  BTW, it's a shame for Lenovo list drive more Multitouch for X200T, which does NOT work properly

  C.

• X 201 tablet Pen problem

  Stylus works very well in landscape mode, but when I go to portrait the pointer moves across the screen. I can't calibrate because when I open it and get the touch screen gives no answer. Tech support wants recreate me the image on my computer, but I want to do as a last resort since it will result in several hours of reloading programs.  I think it is associated with driver.

  Moderator Note: subject edited.

  I think that will solve your problem. It fixed mine.
  Uninstall the compressed DSI 7.0.2 - 10 programs and features in Control Panel.
  Install CIOS Tablet 7.0.2 - 19 from this link:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74908
  Reset.

  It solved my problems and I think he'll adjust your.
  Barry

• USB Flash Drive gives the error "you must format the disk in drive E, before you can use it"

  I just plugged my USB pen and a message pops up saying: "you need to format the disk in drive E, until you can use" I was wondering if and how I can solve this problem? Can anyone help? Sam
  * original title - USB pen problem *.

  Hi samanthaGibbons,

  What is the make and model of your USB Flash drive?

  The USB Flash drive works in any other computer?

  It might be a problem with the drive itself, or it may need to be formatted.

  I suggest you check out the website of the manufacturer for possible troubleshooting or know how to reformat the disk, if necessary.

  I hope this helps!

• Problem Pen Tablet Portege M700

  Hello

  I saw a little problem with my toshiba so m700 I plug it into the docking station I can use the feather ok but if I want to remove it from the docking station and to write something in tablet mode after revocation the docker the pen stops working.

  For starters, it works again, the only way is to restart the laptop.

  I tried to reinstall the driver of pen for this but it did not help, it seams to work ok for my collogue who has the same laptop and docking station.

  Thank you

  > I tried to reinstall the driver of pen for this but it did not help, it seams to work ok for my collogue who has the same laptop and docking station.

  If colleague using the same notebook and the same docking station and if the problem is not using this combination of material, so I guess that the problem is related to the software installed.
  Maybe it s not a pen software, but maybe that's a problem with the entire system or 3rd pary software...

  In your case, I recommend you test the operation of pen tablet again after that the laptop was recovered with the Toshiba recovery disc.
  Don t install any 3rd party software before you check this!

  Welcome them

• Acer Aspire R13 problems active Pen (R7 - 371T).

  I bought a new R13 Aspire, with recommended acer active pen for this model. Touchpad is flicky and wobbles in his laptop computer screen resolution (very unpleasant to use) place and brightness are great and it is very sensitive to the touch of the finger and capacitive pens.
  However when I use the active stylus, it works very well for about 5 minutes and then it starts to jump and jump and then the pen stops working. After a reboot, pen starts to work, but same thing happens. When I pass the pen on the screen he sees clearly, but the movement is not smooth, in the same way, when I use the stylus to draw he jumps and jumps a lot. I calibrated my monitor and the problem still persists.

  Also ACER calls for the rejection of palm, and palm rejection does NOT at all.

  Anyone had the same problems? or your active pen works perfectly, I can't determine if the problem I have is from the pen or screen.

  Any suggestions? or comments?

  I sent my camera previous back and got a new one from microsoftstore. It seems that the problems I had were specific unit. This new one works fine, the touchpad in the last laptop has obviously had a physical since problem she wavered and has not identified any multi-geste.

  I'm happy with this one, it has a pilot updated synaptics, not the most recent one (there is a new Synaptics driver on the Acer site for this laptop that does not yet install) but it works.

  Contacted technical support and asked why not install updates it seems that this model is still a work in progress. They are updating the drivers, software managments power etc.

  Pen Active Acer works very well in ONENOTE, because the application rejects touch capacitive and works only with the participation of digitizer. but in the other Palm apps rejection does not work. I'll trade my pen as well and see if the problem is with the pen or not.

• Amazon Kindle on Surface - problem with highlighting using pen

  When I try to use the (original) stylus Surface Pro with Amazon 80% of the time when I select something in a book, the Surface Pro jumps as if by magic to a different page.  This problem is reproducible constantly and is not serious if the app or browser of the Kindle version.

  What is my pen?  I have yet another defective Surface Pro?

  Nothing but trouble with my Pro Surface.  This is my second.  I wish that Microsoft just give me a replacement Surface Pro 2 instead please.

  It overheated and now Kindle is not working properly.

  What a nuisance with this overpriced, overheating, is only partially functional hardware.

  Anyone else have this problem with Kindle on Surface Pro?

  Respectfully,.

  Joshua Lieder

  I got a tip from a friend who has a Surface and noted that the latest versions of the Amazon Kindle do not always work with the pen from the digitizer.  I downloaded a version of work much earlier of the Amazon Kindle, and everything seems to be better.  I go to work and struggle with this material.  I think my return period has spent too much anyway.  Sigh.

• Pen tool problem

  I'm having a problem with the pen tool recently. the pen tool doesn't let me do the sharp edges or horns.

  for example.

  I try to do that.

  

  And I am doing this: I

  

  See how the pen tool will not let me do the curve?

  It is a huge problem, because I want to do logos and I can't.

  If I'm doing something wrong, or using the wrong tool please tell me the correct way.

  I should also add the alternative way (which seems a bit lengthy compared to above, but who can help with a different design)

  Start up and going counterclockwise

  Click on the highest point of the page

  Click the second (straight line)

  Click on the third (straight line)

  Click and drag in the fourth (to create the curve)

  ALT click on the fourth point, which you have just created (which removes the handle facing forward)

  Click and drag to the fifth (to create the curve)

  ALT click on the fifth (to remove the handle facing forward)

  Click on items 6 and 7 (straight)

  Click and drag the 8 (curve)

  ALT click on the 8th (removes the handle facing forward)

  Click and drag the 9 (curve)

  ALT click 9 (to remove the handle facing forward)

  Click on the 10th (straight line)

  Click on the starting point (straight line to close the loop)

  

  Dave

• Fan X201T problem!

  Hi Ive got a X201T and the other day after school I close the lid, but I forgot to sleep / turn off the computer and put it in my bag. After I came home and out it was really very hot (my bad D and then the fan starts to make noises of revvvvvvvvvvving faster.) After I let it cool down, the noise persisted. I touched the edge of the shelf (the edge beside the keys F1 and tab) and the noise went. If I hit him a few more times it is.

  Anyone has any ideas if there is nothing wrong and can I fix it? Thank you very much

  Hello

  Welcome to Lenovo Community

  Because you have kept the phone in working condition in your bag, it could have accumulated all the dust particles

  Who were there in the bag, which is originally the noisy fan

  Now, to solve this problem, we need to clean the fan

  Please refer HMM.  You can get the fan by removing the keyboard.

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles_pdf/43y6632_08.PDF

  Hope this Helps

  See you soon!

  _______________________________________________________________________________________________

  Important note: If you need help, post your question in the forum and include your system type, model number, and operating system. Do not post your serial number.

   

  Do you have someone help you today? Press the star on the left to thank them with Bravo!

  If you find a useful message and it answers your question, please mark it as an "accepted Solution"!  Identify the verified solution and benefit, this will help the rest of the community with similar issues.

   

  Follow @LenovoForums on Twitter!

• After problem pressure pen Wacom effects CC...

  Hello Experts :-)

  I'm having a problem with the function of painting in after effects CC 2015.3 when you use a Wacom tablet. Basically, the pressure of the pen does not work.

  Please note, that only happens in After Effects, Photoshop and illustrator are fine with the Wacom pressure sensitivity and work as expected.

  So far, I have:

  • Removed and reinstalled the drivers Wacom - no effect.

  • Trashed after effects Prefs :-(- no effect

  • Tried a new wacom - still the same

  • Has tried the new Pen - still the same

  OS: I'm on a new (end 2013) Pro Mac under OS X El Capitan

  Feature: The Tablet is a Wacom intros Pro

  Software: After Effects 2015.3 CC

  Any help to solve this is greatly appreciated.

  Thank you

  Good news Wacom have to get in touch and sent a link to a more stable older driver, which has solved the problem of the pressure of the stylus in After Effects and so far no problem in illustrator! Hope it stays like that.

  Link to the driver

  Link to Pdf on how to uninstall the old drivers

  If this does not work I suggest you get in contact with Wacom, the driver they send may be specific to your configuration of software / OS.

  Good luck!

• Photoshop 2015.5 - Pen pressure and problem of fluidity.

  Hello

  (1) after photoshop update for 2015.5 I have problem with the pen pressure,

  It does not at all. If I put ink windows 'on' in the context of wacom, it works, but there is problem of boring circle.

  He worked in a previous version without any problems.

  (2) in the earlier version and always in 2015.5 there is problem with fluidity, when I press alt + right click (wacom stylus) to resize

  brush, my cursor jumps around.

  Data sheet:

  Windows 10 64 - bit

  Wacom Intuos 4

  I7 4930 k

  32 GB of ram

  Hope you can help.

  You have configured 2015 for cc use the Wintab API for pen holder. If so you may copy the configuration file is not a normal Adobe file.   Also make sure that you have configured the support of Windows pen to turn off the key and hold.  Who can get rid of the boring circle.  ALT + Right click and hold is difficult with a support of IMO Wacom tablet pen.

• Can someone help me? Here's my problem, I typed my redemption code and got my serial number, but as I get a pen and crushed paper my computer and now I can't have my serial number for the 14 items

  Here's my problem, I typed my redemption code and got my serial number but as I get a pen and crushed paper my computer and now I can't have my serial number for the 14 items.

  All can help me please!

  First, check your Adobe account to see if the serial number is Adobe ID

  Otherwise, you need to contact Adobe directly

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html