Xbox controller for pc windows

Similar Questions

• Xbox controller for windows (showing twice) problem

  All the games I try to play with my xbox 360 to pc gamepad, shows me that I have 2 controllers connected, even if only is connected. That's what shows me all the games: the two (receiver wireless xbox 360 for windows) controller and xbox controller 1. and it works as if the 2 controllers were connected. How can I fix?

  Hello

  After the question in the link and check if it solves the problem.

  http://support.Xbox.com/en-us/

  Hope this information helps.

• How to create a controller for the window "Configuration of spectral measures.

  Hi all

  Problem: We know that to change the 'window' for spectral measurements. There need to double-click it, the spectral measurement set-up window pop up and select regardless of the window (for example, no, Hanning, Hamming, Blackman Harris etc.) we like to not view. Instead of double click in the diagram, I would like to provide users a controller of the window in front panel as a list, so that they can select the type of window appropriate according to the needs.

  I find how to solve it. Can someone share their knowledge have her number?

  Right-click on spectral measures and "convert to Subvi.  Right click on yellow VI that appears and click Open the front panel.  Replace the constant 'Spectrum Window' with a control of enum (0 = None, 1 = Hanning, 2 = Hamming, etc.).

• Where to find SM BUS controller for vista Windows 7 Home Premium?

  I can't find the driver for this OS, I tried free driver updaters, Microsoft Problem solver, no success please help me :). My computer is a

  Product HP 655 C9H47LT

  additional information:

  Feature of Fhysical name:

  NTPNP_PCI0006

  Hardware ID

  PCI\VEN_1022 & DEV_780B & SUBSYS_1885103C & REV_14

  PCI\VEN_1022 & DEV_780B & SUBSYS_1885103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  Compatible ID.

  PCI\VEN_1022 & DEV_780B & REV_14

  PCI\VEN_1022 & DEV_780B

  PCI\VEN_1022 & CC_0C0500

  PCI\VEN_1022 & CC_0C05

  PCI\VEN_1022

  PCI\CC_0C0500

  PCI\CC_0C05

  This driver is part of the drivers for your card motherboard chipset.

  Get them here

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5225019&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswLang%253D8%257Caction%253DlistOS&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Alternatively, you can contact HP support.

• Xbox 360 wired controller for PC

  Hello

  4 months ago, I bought an Xbox 360 wired controller for PC, I use it since a few games, but especially of the Fifa and recently, when I connect to 15 of Fifa, it detects 2 controllers instead of one and the controls were reversed as, as 2 controllers 1 controller-controlled and I can't fix it ,

  I already reinstalled the drivers, put it in the other USB Ports and I started to wonder if it's because of my windows, perhaps as an error that detects how, I would be very grateful if anyone knows a solution for this problem

  Thank you

  Hello

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  With the help of the joystick Xbox 360 for Windows
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

  Set up your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

  Troubleshoot your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

  For most of the problems of Xbox:

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  Xbox - Feedback
  http://Xbox.uservoice.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Turn off the Xbox controller interface in win7

  So, I've been using this controller Xbox on my PC for a week now, but what annoys me is when you press the average xbox button, a small window pop up (which look like this http://imgur.com/DpkfKiT) it really annoying me is anyway to disable?

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Troubleshoot your Xbox 360 for Windows controller
  https://support.Xbox.com/en-us/Xbox-on-Windows/Accessories/Xbox-controller-for-Windows-help

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• My stoped working microsoft xbox controller

  I had my controller for less than a year, I was JUST using it the previous day very well. Now, today, I get an error message that windows don't recognize not and despite suggestions to uninstall the driver ect. Always the same question. What is going on?

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run the hardware and devices Troubleshooter and check if that helps.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  If this does not help, follow the steps in this article and check the issue.
  Reference:
  Troubleshoot your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Xbox-on-Windows/Accessories/Xbox-controller-for-Windows-help

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Xbox controller will not connect to the xbox wireless receiver?

  I got my Receiver to finally work and now when I try to connect my controller that do not access, it just flashes continuous four lights repeatedly. How can I fix it?

  Hello

  Welcome to the Microsoft community.

  Of your posts that I understand that you are facing issues connect the Xbox controller for Xbox wireless receiver.

  Have you tried to use the controller on a different computer?

  You can see the steps from the following link and check if it works:

  Xbox 360 Wireless Controller disconnects or unable to connect

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

  Reference:

  http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info

  You can also contact Xbox support team for assistance:

  http://support.Xbox.com/en-us/contact-us?XR=footnav

  It will be useful.

  If you need assistance on questions regarding Windows, let us know and we will be happy to help you.

• A Xbox controller stopped working with the PC

  I have a windows pc 8. I used my xbox controller for games there a few months. Randomly stopped working. Before when I plugged it in, it vibrated, lit and then it was connected. Now when I plug it does not vibrate, and it does not turn on the controller. He says only: "unrecognized usb device". I went to Device Manager and nothing comes for a controller xbox either. When I used the controller on my pc I have installed all the drivers. Just plugged in, and it worked. I have no idea why it stopped working. I have not installed anything new recently. Any ideas?

  Hi Jaysiff,

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. Have you tried to connect any other USB device to this new computer laptop? If so, was the same result?
  2. Are all the device drivers and updates of Windows updated?

  According to the description of the problem you found error message "unrecognized usb device". The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Device Manager by pressing the Windows key + X and select Device Manager from the list. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  Method 3

  If the problem persists, I suggest to update the drivers and follow the steps in the article mentioned below to connect and see if it helps you to solve the problem.

  How to connect a controller to wireless an Xbox to a PC

  Xbox 1 controller drivers

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Used to synchronize wireless xbox 360 controller for windows

  When I try to sync my controller wireless receiver for windows, the guide button light moving in a circle for a bit and the light on the receiver flashes, then guide button on the controller just flashes while the receiver is solid.  I am running windows XPI tested on two other computers (also XP) and my 360, it syncs very well, and the quadrant 1player lights.

  I installed the software supplied with the controller.
  I tried all the usb ports on my computer.
  I've uninstalled and reinstalled the software several times.
  I have a wireless mouse, and I tried to unplug and turn it off.
  I moved the receiver away from all other objects.

  I am running out of ideas and don't know why it won't work.  Can anyone help?

  Hi thedivinewind

  Welcome to the Microsoft Answers Forum!

  I recommend the methods are:

  Method 1:

  Check the drive Media Sharing service is set to automatic. Steps to follow.

  i. click on start and type services.msc in the search box

  II. Research Media player sharing service

  III. check if the following services are started, otherwise start it and set it to auto

  Steps to set the auto services

  i. search for the service

  II. right-click on the service

  III. If the service is stopped and then starts the service

  IV. Select Properties

  v. and in startup type, select automatic

  Method 2:

  i. Click Start, in the search box, type network

  II. Select network and sharing Center

  III. click on change advanced sharing settings

  IV network discovery. marketing

  c. the file running and sharing printer

  VI. click on save changes

  If the problem persists, you will need to contact Xbox community for additional support. Please visit the link below to find a community that will provide the support you want.

  - http://forums.xbox.com/

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black wired xbox 360 controller for windows flashes and freezes games

  I installed the xbox 360 accessories 1.2, I plugged my black Xbox 360 wired controller for windows on the computer. I let it install its drivers. The ring of light continues to blink all the time, no matter how many times I have uninstalled and reinstalled the program and drivers, it continues to Flash, I even looked for updates for the drivers. When I start a game it also works very well unless I have pull triggers or go at my card or try to pick a lock. (the game is skyrim) It freezes whenever I have try them and I unplug the controller and it thaws and if I plug it back in, it does the same thing again. I tested the controller on a real xbox 360 (works fine), but it doesn't seem to work on my pc. Any help please, but serious answers only.

  Hello

  You will get help on the Forums XBox so - much to use them there.

  Microsoft Hardware - games
  http://www.Microsoft.com/hardware/en-us/gaming

  XBox 360 wired controller - Support - see 'Need help?' on the right side of the page
  http://www.Microsoft.com/hardware/en-us/p/Xbox-360-controller-for-Windows/52A-00004#support

  Rob - SpiritX

• Microsoft xbox 360 controller for windows problem with NFS

  Hi, I brought yesterday Microsoft xbox 360 controller for windows. I installed and the end driver. The problem is that when I play NFS Most Wanted & NFS Carbon, cars automatically starts left thin when I accelerate? Why is - this problem to occur, and what is the solution?

  I also changed the default controllers controls and set left lean & thin right to left analog stick left/right as PRIMARY & I updated lean left & lean right D - pad left/right as SECONDARY controls.

  Hi Zxcvbnma,

  ·         Is the specific issue with only Need for Speed or does happen with other games as well?

  If the problem is specific only with Need for Speed, you can try to uninstall the game and reinstall the game and check if it works fine without any problems.

  I also suggest that you uninstall Xbox 360 controller drivers and reinstall the drivers that could help you solve the problem.

  Check the settings of the game. You can also connect the controller to the other computer and use it and check if the problem still persists.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Xbox 360 controller for windows question

  Im looking forward to buying the windows xbox 360 wireless controller. I would like to know what microsoft and other games is compatible with the pad at the moment. IM in the current world of warcraft and halo so far. I want to know if its worth buying.

  my pc is
  Quad Core AMD phenom x 4
  6 GB of ram
  640 GB hd
  Windows vista 64-bit

  Hello AxeMankd,

  I have the 360 controller and it works with all the games that are supported controls for controllers.  Most recent games have even profiles of controller for the 360 controller.  The only game that I wasn't able to use it with was the Call of Duty 4, but who were able to evolve with an update on the side of the games.  There has been some problems with some games and wireless controller but not the wired version.  It was a driver problem which is probably not a factor now.  I have not tested version wireless with my PC because I have not bought the wireless PC part, but I don't have two types of controller.

  Happy fragging I have a simple philosophy: just assume everyone is a piece of _ and then be pleasantly surprised if you find someone who is not.

• The headset audio USB deforms after initially connect xbox 360 controller for windows

  Hello world.

  It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

  Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

  I have Windows XP Home SP3.

  writing in the new message: * e-mail address is removed from the privacy... *

  Hello world.

  It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

  Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

  I have Windows XP Home SP3.

  The Xbox controller draw right on the edge for a USB port, putting pressure on all of the USB bus, especially if there are other USB devices. If you get an external USB powered hub to add to your system and plug the controller, you will solve your problem.

  I had the same problem with my Creative Labs USB sound card and the Xbox controller at the same time. I picked up a Zonet similar to this (different brand):

  http://www.Newegg.com/product/product.aspx?item=N82E16817182168

  I plug my controller, keyboard, and mouse dongle in the hub and plug my sound card directly into one of the ports on the back of the PC. Problem solved! I got no sound since problem.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• Wireless Xbox 360 Controller for Windows all of a sudden not connect into any USB port

  Original title: Wireless Xbox 360 Controller for Windows issue.

  Hi, I bought this back in 2008 and it has been flawless since today... I tried to use it and the controller is unable to connect to the receiver.

  There is no light on the receiver, even when I plug it into a different USB port there is still nothing... I even tried another computer. I assume the receiver is nakered?. Can anyone shed some light on this?

  If the receiver is so broken, can I buy this receiver on its own and that it will be compatible with my wireless controller Xbox 360 instead of having to buy another expensive controller...

  Thank you very much.

  Hello

  I suggest you to post your questions or comments about the Xbox 360 Forums, so that you will be provided with the assistance of your Xbox 360 product.

  Link: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Hope this information helps you.