Xbox Live call disconnection after every 10 Minutes.

Similar Questions

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• VPN users drops after every 5 minutes

  Hello world

  We have users whose remote VPN drops after every 5 minutes.

  I need to know what things can check to solve the problem?

  The user connects by RSA Token.

  ISP connection is ok is not question.

  Something I can verify in SAA?

  Thank you

  Mahesh

  Client side, have you tested wired vs wireless to see if the problem exists in both?  If it's the only one, but not the other, try to update the drivers.  Also, if it's windows 7, take a look at the power settings in the control panel.  I saw where the aggressive powers will be stop standby network port.  Not that big of a deal in a LAN environment but it wreaks havoc on the VPN.

• schedule a process to call a process every 3 minutes

  Hello

  I would call a process every 3 minutes to check the documents that I can use the SOAP or EJB. Can someone help me on how to call an automatic process every 3 minutes.

  Thank you

  Assume that:

  P1 is the process that you want to call every 3 minutes

  create a process named P2.

  In the process P2:

  1 Add a subprocess activity and set to call P1.

  2. Add an activity Point to wait and 3 minutes.

  3. connect the route to subprocess (just make a loop)

  now invoke the P2 process manually (by right clicking, and then Invoke) in the workshop.

  Your P1 will be get invoked by the P1 assistance process every 3 minutes.

  Nith

• TC6 Firmware - call disconnects after 2 hours

  Hi all

  Our client complains that after the firmware update on the endpoints of telepresence (C40, C60, EX90) to TC6.x, there are two questions:

  1 end with TC6.x points will disconnect after 120 minutes to be connected to any appeal initiated by the remote end.  They will not cut the minute 120 if the TC6.x Unit has initialized the call.

  2 end points with TC6.x cannot connect to units MXP running F6 or earlier.  Since we MXP Codec Software F6 and F5 this is causing problems with the calls point to point.

  They have units with the TC5.1.6 software which have no problem at all. The only thing among others as the routers and switches is a VCS controller.

  Anyone has any ideas on what is the cause?

  Thank you

  John

  In TC6, we turned silently on TCP KeepAlive for the session h225 running with the default time of linux tcp_keepalive_time of 7200 seconds.  That would probably explain the disconnection to 120 minutes which sees the John after moving from TC5.1.6.

  I would also say that if this is the case, there is something which is tcp to the current between the two devices.  The firewall is also my first thought.  Perhaps WAAS on a router?  Sometimes you can get a clue that this is occurring by comparing the tcp ack/seq/windowsize header to see if it is different between the sending to the receiving side for the same package.  Something like 'tcpdump-s0 w /tmp/h225.pcap port 1720' root must limit the collected output.

  The TC6 troubleshooting located here would be a good reference in newspapers and tcpdump to use for troubleshooting signaling related issues:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC6/troubleshooting_guide/tc_troubleshooting_guide_tc60.PDF

  The example uses this doc does not filter the traffic and John you do not want to limit the output of tcpdump only for signalling interesting to avoid problems with the size of the OCAP collected file.

  We have a bug open better control KeepAlive on the session h225 (CSCub20591) but not clear if/when it will be executed and for now if there is something that is expire tcp sessions in the network, changes will be made here to avoid this problem.

  For the 2nd question, I'm not aware either a problem with older MXP but your approach Martin to try a later version of the software would also be what I would recommend.  If you need to solve problems with old software MXP TC6, the same troubleshooting guide h323 newspapers are where you want to focus on to see where in the handshake the call fails and compare this output between TC6 and TC5.1.6 as to what has changed that can have an impact on this.

• Satellite S50-B-131 disconnects after a few minutes

  Today when I finished my recording and after only 2 minutes my S50 has disconnected itself... I restarted again, and then again after 2/3 minutes and then... I tried to use only the batery to check if the power supply is a problem... Same situation... However, whenever I have started on the laptop set to normal and fast before disconnect you again. Clues?

  I have to finish the work and its only in the hard drive, I was about to copy it into the external memory... but not the time until it discoinnected...

  I had suggestions appreciatte

  Thank you!!

  Carlos

  With "disconnect" you probably mean "unplug", no?

  On this virtual path, it is not easy to say why this is happening. What kind of job do you have?
  I mean if the laptop turns off without apparent reason, it could be due to overheating and critical temperature of material.

  Can you please do a little test? Start your laptop and enter the BIOS settings. After doing this let him for a while and let us know if laptop will stay on or switches OFF again.

• Blue screen and the computer goes into a reboot loop after every 15 minutes

  Original title: fix blue screen

  Computer stops automatically at almost every 15 minutes apart, the blue screen appears and is long enough to read the information to fix this.  Computer automatically restarts.

  Hi Lady Cole,.

  a. when the issue occurred?

  b. remember to make changes to your computer before the problem?

  Step 1:

  To disable the automatic restart in case of system error, follow these steps:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

  When a problem causes a blue screen of death or another major error that stops the system, the computer restarts automatically. Need to restart manually, and you would be able to note the error message and after return.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Step 2:

  Start your machine in safe mode and check if the problem persists.

  Step 3:

  If the problem does not occur in safe mode, I would like you to put your machine in a clean boot State in order to determine whether the problem is caused by a conflict of third party software. Clean boot helps eliminate the conflict of third party software.

  Note : do not forget to restart your machine as usual.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Wireless disconnects after a few minutes, restart result BSOD

  Hello, all of a sudden my wireless connection keeps disconnecting after 5 minutes, and then I restart my computer it will donw with a screen BSOD saying driver_power_state_failure.

  There are a few available mini dumps well as I write.
  I have a Lenovo laptop, T420 with intel centrino wireless 6205 r, running windows 7.
  Can I attach the mini dump here somehow.

  Hi, Germain,.

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.

  I wish that you disable the Windows Firewall as well the antivirus temporarily.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Let us know the status.

• MapleStory disconnects after about 2 minutes in Windows 8, no problems with Windows 7

  I just got a new laptop with Windows 8 on it. The specs are well above what is needed for the game, which shouldn't be a problem. I am able to boot and log in the game, but after about two minutes, it disconnects, gives me an error message saying: "unable to connect to the game server. Please try again later. "The window closes so saying me that I was disconnected. The game works perfectly fine on my old laptop, which is running Windows 7 and has worse characteristics.

  I tried to run in compatibility mode, but get a different error after blackcipher loads, but before loading the game, saying: "the instruction at 0 x 00649243 referenced memory at 0 x 05055215. The memory could not be written. Click on OK to terminate the program. »
  I've looked everywhere and can't seem to find solutions.
  If it helps, my computer is a dv7 HP Envy with an Intel i5, 8 GB of RAM and a 2 GB nvidia geforce GT graphics card.
  If anyone knows a solution to make it work, it would be most appreciated. It seems that a few other people have the same problems, but others with Windows 8 have no problem, so I hope that maybe it's just a setting I need to change.

  Hi Sannesteenhuis,

  Welcome to the Microsoft community.

  Please answer these questions to better understand the issue.

  1. Have you tried the steps by Pinaki displayed? If Yes, then what is the result?
  2. Have you tried measures to solve this problem?

  I suggest refer you to the following procedure to copy the Event Viewer logs.

  To view the events in the Event Viewer Application log:
  1. press the key Windows + X key and then click on Control Panel.
  2. double-click Administrative Tools, and then double-click Event Viewer.

  NOTE: Alternatively, you can start Event Viewer by starting the Microsoft Management Console (MMC) program that contains the snap observer of events.
  3. Click to expand Event Viewer (if it is not already expanded).
  4. click on Application.

  The events that are logged in the application log are displayed in the right pane.
  5. to view more details about a specific event, double-click the event that you want to display.
  6. to copy the details of the event, click the copy button, open a new document using the program in which you want to paste the event (for example, Microsoft Word) and then click on paste on the Edit menu.

  Also suggest you try to install the game in compatibility mode and check if it helps.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope that the information provided was useful. If you need other assistance do not hesitate to post. We will be happy to help.

• dbms_scheduler call to run every 5 minutes between 06:00 and 22:00

  I want to set up a call to execute a PL/SQL procedure every 5 minutes between 06:00 and 22:00.
  
  I can do each part 5 minutes like this:
  

  exec dbms_scheduler.create_job                                 -
          (job_name             => 'JOB_1'                       -
          ,job_type             => 'STORED_PROCEDURE'            -
          ,job_action           => 'package_a.procedure_b'       -
          ,number_of_arguments  => 0                             -
          ,start_date           => TRUNC(SYSDATE,'HH')           -
          ,repeat_interval      => 'FREQ=MINUTELY;INTERVAL=5'    -
          ,end_date             => NULL                          -
          ,job_class            => 'DEFAULT_JOB_CLASS'           -
          ,enabled              => TRUE                          -
          ,auto_drop            => TRUE                          -
          ,comments             => 'my comments'                 -
          )

  and the [docs | http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/scheduse.htm#sthref3603] tell me repeat intervals:
  
  
  But I can't work on the syntax to combine the each interval of 5 minutes with the window from 06:00 - 22:00. I have looked at the create_window_syntax, but cannot see how to combine this with the repetition of 5 minutes.
  
  
  Thank you
  
  Ben

  SQL>select * from v$version;
  
  BANNER
  ________________________________________________________________
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  PL/SQL Release 10.2.0.4.0 - Production
  CORE    10.2.0.4.0      Production
  TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production

  Try an interval like this:

  FREQ=DAILY;BYHOUR=6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22;BYMINUTE=0,5,10,15,20,25,30,35,40,45,50,55
  

  There may be a shorter way to represent, but I think it does what you want. You can use the DBMS_SCHEDULER. Procedure EVALUATE_CALENDAR_STRING to see if it meets your requirements.

  DECLARE
          start_date              TIMESTAMP;
          return_date_after       TIMESTAMP;
          next_run_date           TIMESTAMP;
  BEGIN
          start_date := TRUNC(systimestamp) + 1;
  
          FOR i IN 1 .. 196
          LOOP
                  DBMS_SCHEDULER.EVALUATE_CALENDAR_STRING
                  ( 'FREQ=DAILY;BYHOUR=6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22;BYMINUTE=0,5,10,15,20,25,30,35,40,45,50,55'
                  , start_date
                  , return_date_after
                  , next_run_date
                  );
  
                  DBMS_OUTPUT.PUT_LINE('next_run_date: ' || next_run_date);
                  return_date_after := next_run_date;
          END LOOP;
  END;
  /
  

  I hope this helps!

• USB 3 G modem disconnects after 10-15 minutes.

  The problem is whenever I try to use my 3g phone to connect to internet, it automatically disconnects after a few moments. I searched the windows knowledge base articles and found there is a problem with the modem usb windows driver and they gave an update, but stated that the driver update is beta version.and, so it happens that I installed the update and always internet keeps disconnecting.

  They say that the problem with the driver, it's when a usb modem at a speed higher than 256 Kbps or so is plugged in, it keeps disconnecting because of a bug in the driver. Please help.all my money for the purchase of a device 3 G active will simply wasted.

  The link to the fix is here:

  http://support.Microsoft.com/kb/925681

• Webex Cloud CMR SIP video calls disconnect after 20 seconds

  Hello

  I am running version 9.1 with Exressway-C CUCM / 8.6 Expressway-E.  I have no problem doing business SIP video calls.  However when I make video calls on a site of WebEx CMR, the call becomes still cut off after 20 seconds.  It is audio and video for the first 20 seconds and then disconnects the call.

  I was able to recreate this situation of 3 of my clients running CUCM version 9.

  I have 2 clients running CUCM v10.5 and the issue is not the case.  I don't know if this question is 100% related to the CUCM version, but looks like a correlation obviouse.

  I watched the SIP trace and it seems that the endpoint CUCM is end the call with normal call clearing.  I tried 8945 phones, jabber for iphones and a C40 and I get the same results.

  If anyone has any ideas I would appreciate it.

  Thank you.

  Hello

  Can you receive calls B2B? During the call set up, Webex will try to set up another session TCP inbound to your E Expressway on port 5060 and 5061, do you have this open to outside within the TCP sessions? (see page 5 of the CMR-Cloud deployment guide: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/sol...)

  If they are open, the TCP session is configured for an incoming invitation with complete SDP of the TPS Cloud, you can check your sip max message size is located at 11000 - if you went from CUCM ~8.6 5000 was the default size and the default continues for an upgrade.  Check under system-> Service settings-> CUCM service-> show click on the button to display all options, and then check the size of incoming messages SIP advanced Max.

  -Jonathan

• Capture to users running sql in shell script after every 10 minutes

  Hi all
  
  We have a strange problem. crash of database, so decided to check that users make when OS/DB crashes.
  
  I need your RACE/SCHEDULING of entry into such a script, which includes all active users with SQL running and add to a log file so that we are aware of what has past when DB/OS crashed.
  
  I can run this race a query V$ SESSION, V$ SQL and V$ PROCESS but I need your ideas in writing a SHELL Script and scheduling can work via CRON.
  
  Kind regards.

  Or better yet

  sqlplus /some_report_file. 'date + %m-%d - hour %M %Y'

• Fire Fox 14 crashes every 15 minutes. Usining win7. It comes after update of FF13. need a solution.

  FF14 is blocking at random after every 15 minutes. There's a general problem this problem after the update of FF13. All plugins are up to date. No viruses on the system. Have no solution?

  Thank you

  SOLUTION - FF14.01 crashing (used as Bitdefender antivirus)

  Dear all,

               I guess the solution has been found, all those who are facing FF14.01 crashes and are using BIT DEFENDER as their antivirus, please update to FF15 Beta Version and crashes should not occur any more. Hope this helps all those with the chaotic crashes of FF14.01.
  

  All the best.

• Error on Windows Vista blue screen about crash of hard disk after every 10-15 minutes.

  My system crashes after every 15 minutes showing this blue screen error. Since a few days before this error, hard drive, reading ability has been slowed a lot. When opening a disk or a file, it takes a lot of time compared to the normal fulfilment. After this blue screen, my system goes for a restart, then another error appears as hard drive not found. I use dell Studio and ran the diagnostic system and it too hard disk error found. Is it possible to solve this problem in my old hard drive with new replacement?

  Vista/xp have already installed software to transfer the BONES of one HD to another, if youre pc is

  a desktop computer, it's fairly easy. Or, install a new HD to the pc boot, enter the BIOS, install the vista installation cd,

  set pc to boot from the cd (1st boot priority) 2nd HD, save and exit. The installation menu to display, follow

  instructions, select 'format' of the HD and windows will automatically install.

  Or 2nd HD, installing under windows, go in run, type: diskmgmt.msc in msc, R.click on the new hard drive, create a

  partition, use the default settings in the wizard, once thru, re-click, select to format, once through exit msc.

  Back to run, type: XCOPY C:\*.* D:\/c/h/e/k/r are for everyone in the DOS window, once its through, the new

  HD has the old operating system installed. D: is the letter of new HD, if, in light of the others, then use instead... It works

  very well, but with a hard drive faulty, data could not get transferred, or it may be damaged...